When saving revisions to a template does it change the editable divs on existing pages?
I have made changes in a template that has at least 100 child pages. When I apply the changed template to these pages does it change any of the editable sections of the child pages? I would guess it does not but I need to know for sure. It would be a total disaster if I had to revise all child pages after the upgrade. When I make the revisions on the template would it be better if I deleted all info in the editable sections in the template so they would not affect the child pages or would that blank out what is now in the editable portions of the child pages. I cannot find any info in my after market manual or on the adobe help section about this. I am looking forward to your advice.
Olde Worlde Lace wrote:
I have made changes in a template that has at least 100 child pages. When I apply the changed template to these pages does it change any of the editable sections of the child pages? I would guess it does not but I need to know for sure.
The template should not change any content in an 'editable region' of a child page. (I would always make a back-up copy of your site folder before you make any changes just incase something goes wrong)
Olde Worlde Lace wrote:
When I make the revisions on the template would it be better if I deleted all info in the editable sections in the template so they would not affect the child pages or would that blank out what is now in the editable portions of the child pages. I cannot find any info in my after market manual or on the adobe help section about this. I am looking forward to your advice.
The content in editable regions on your child pages should not change as they are not in regions which are 'locked' into the main template.
I would as I mentioned make a copy of your site folder before you mess around updating anything.
With 100+ pages it sounds like the workflow could be better managed using SSI(server side includes). You have to upload 100 pages after you make the changes to the template only to discover you have missed one change and then have to upload the whole lot again.
Similar Messages
-
when saving image i want that firefox auto change the file name if same name exists, like google chrome does this. if there is any option pl let me know.
this saves images, i just want to save single image, and wants while saving image, it auto changes the name if find similar name of file in the folder. chromium and maxthod does this
-
I get the following error when I try to create a Virtual desktop
collection;
"The Virtual desktop template does not meet the provisioning requirements."
although I'm specifing a sysprep'd VM installed WS2012 for a virtual desktop template.
Is there any way to resolve?
Or, is there any couses of this message?
thanks.I realize this is an old thread. I'll post and see if I get a response. If not, I'll create a new thread. My question is how does Microsoft suggest SPLA partners create VDI pools since they cannot license Windows 7 or 8 via SPLA? Why
would you restrict the provisioning to only the desktop operating systems that you won't allow partners to license for deployment?
Are there any plans to change this to include 2008 R2 or WS2012 as the base OS for a VD template?
Rob -
Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
index.html
images
pages
page1.html
page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
mywebsite
index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue. -
wont send on email when saved as powerpoint document as its 59mb, yet the same document on my mac saved as powerpoint is 7mb ?
Came here to complain about this maddening feature. Why it doesn't save the PDF out to a separate instance of the document is beyond me. PLENTY of us want to save the PDF without the layers, and want the PSD separate.
"Oh good, I've completed this document.... let me just save it out as a PDF for client delivery and... Now all the work is gone."
Genius, Adobe, genius. But it's cool--we'll just keep paying out the nose on a subscription basis with no fix for small errors like this. -
When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.
Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option. That has jump started iWeb for others. I could take a couple of tries.
If that doesn't work try the following:
1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iWeb folder.
Click to view full size
3 - launch iWeb and try again.
OT -
Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?
Did anyone find a good way to sort the shared albums better, so that the ones you share with can better find their way around.
You can arrange them manually in an album, select all and use the Photos ➙ Batch Change ➙ Date to menu option and check the box to add a set interval between photos. That will let the photos be sorted by date and be in the order you want:
OT -
my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?
It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
Changing animation frame rate when rendering in photoshop does not change the length of the video?
I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
Does anybody know of a solution to this?
edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.floriannaart wrote:
Changing animation frame rate when rendering in photoshop does not change the length of the video?
Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered. To change the length of a video you need to change the length of the video timeline. If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it, The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up. The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
The duration a of Frame animation is the sum of the times each frame is displayed. In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video. To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion. You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation. Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video. It will not have audio but you can add audio to it. -
When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!
Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings. -
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?
I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet. -
# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
When I entered my credit card does not accept the new
When I entered my credit card does not accept the new
Hey there longislandmacca,
It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thank you for using Apple Support Communities.
Cheers,
Sterling -
How does one change the font size for folders and/or file lists in the Bookmarks Library?
How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
Maybe you are looking for
-
Game center does open, but does not let me submit my password. My password is correct! Please help!!!!
-
SELECT QUERY BASED ON SECONDARY INDEX
Hi all, CAN ANYONE TELL ME HOW TO WRITE SELECT QUERY BASED ON SECONDARY INDEX. IN WHAT WAY DOES IT IMPROVE PERFORMANCE. i KNOW WHEN CREATING SECONDARY INDEX I NEED TO GIVE AN INDEX NO -iT SHOULD BE ANY NUMBER RIGHT? I HAVE TO LIST ALL PRIMARY KEYS FI
-
Sending File as attachment using Mail adapter with naming convention
Dear All, I am working on a scenario in which my sender file adapter is sending one file named 'ABC.ok' in one of the folders in application server. I have to send the same file with the same name to one of the folders at FTP and also to my customer
-
Hello, Table VBUK is for order header status. I made changes to sales order. which field in table indicates sales order change Date & Time? thanks
-
NEED HELP UNINSTALLING BOOTCAMP
i got bootcamp then i partioned the disk but then when i was at the end it asked for the windows vista disk which i didnt have. So i thought tht if i deleted everything with bootcamp it will go away... and when that didint work i deleted and installe