When SC is partially rejected my manager no workitems are not going to user

Hi Gurus,
Below is our requirement:
Requester (User) creates a SC of multiple line items. Shopping cart is rejected by the manager for a particular line items and rest of the line items was approved, for the rejected line items workitems are not going to requestoru2019s inbox and also e-mail is not triggered to requistioner.(Informing that the SC is partially approved)
Help us how to implement the above functionality? We have figured out a BADI- BBP_WFL_SECUR_BADI will this BADI suit to our functionality.
IF then throw some input on this. Or please suggest any OSS note related to this functionality.
Regards
Paul

Hi Daniel,
Thanks for the quick response.
WF we used is WS14000133, Last approver is Manager further no approvers.
For Manger they havenu2019t set (BBP_WFL_SECURITY) any value.
Regards
Paul

Similar Messages

HT4910 I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?

I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?

I'm assuming you have performed a restore from an icloud backup...
Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure".
As for apps, you could always download them again from the itunes store, without charge. Look for the link to purchased apps, there you'll have a list of the ones you can download free.

We are using SAP SRM to punch out external catalogs. Firefox version 3.5 and below works fine and the items from the catalogs are brought back to SRM .But when we use version 3.6.12 the items are not getting transferred back to SRM from the Catalogs.

SRM is a procurement system from SAP which we use to purchase goods and service. We have external catalogs like officemax, cdw etc which we punchout the items and bring it to SRM for ordering.
When we use firefox version 3.5 and below the items which we add from the Catalogs are correctly brought back to SRM for us to order. But when we use versions 3.6.12 the items are not brought back to SRM.
Internet Explorer 7 and 8 works fine. Is there anyway you can help us.
Thanks
Jayant

Hi,
Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version for SAP solutions. Many of your problem will get resolved with it.
Question 1:
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
Generate EarlyWatch report for more detailed view
Question 2:
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
The libttsh11.so library cannot be found in the related directory.
Cause
The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
Such a configuration will cause, installation, relinking and other unexpected problems.
Solution
Disable the CIO option on the filesystem.
References
NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
Hope this helps.
Regards,
Deepak Kori

When I upload my images to the web they are not as vibrant. I am using the Save for the Web feature.

When I upload my images to the wed they are not as vibrant. I am using the Save for the web feature and my sRGB is checked. I dont know what else to do. HELP!

We really need to see what you're seeing.
Can you post links to before and after?

HT2506 I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue.

When apple no longer includes an optical drive how are you going to burn an itunes playlist

when apple no longer includes an optical drive how are you going to burn an itunes playlist

Well, I don't want to buy an optical drive if I buy a new Mac without one. However, iTunes will not allow "burning" a playlist to anything except a real optical drive.
Now, I am not running Mountain Lion so I don't know if iTunes for Mountain Lion allows it or not - could someone please let me know if it is possible.
For me, on Snow Leopard, I cannot find a way to burn, create, duplicate - whatever you want to call it - a playlist to a virtual drive, a USB drive - nothing but a physical drive.
It just makes me wonder if iTunes provides (will provide) an alternative when there is no physical drive included.

I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I

I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?

You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O.

All folders on my iMac are in alphabetical order, however, when I save an item to a folder they are not. Why?

All folders on my iMac are in alphabetical order, however, when I save an item to a folder they are not. Why?

Thanks for helping BDAqua
No it doesn't.
If I go to that folder afterwards, it is all in alphabetical order.
If I am working in Quickbooks, Mail or QuarkXpress and go to a folder from those programs the folder is out of order and I waste a lot of time
searching through the folder looking for what I want. This never used to be a problem until the last couple of months.

When i print out a color photo the colors are not accurate

I have a new envy110 series CQ811A. I have a windows 7 64-bit laptop. There are no error messages and the Envy works great but when i print a picture off of a web site the colors are not accurate and i mean none of them. i have returned one printer already but this one is doing the same thing. i really like this printer but if it won't print the colors correctly i don't know what i will do. I also have a HP C4280 All In One Photo Smart and whatever is printed off the colors are great it just is not wireless. I have tried everything and nothing helps. Is there a solution

Hi easyneez5!
   Sorry to hear it's not printing web pages so well.
I do have a suggestion, that may or may not align with the way your are used to printing web pages; HP has a new and improved application for printing web page content; HP Smart Print.
   It's supported on IE (most versions) and can do some neat tricks: http://www8.hp.com/us/en/partner/microsoft/bing-bar-for-hp/smart-print.html
There are also other potential 'tweaks' you can try in the [Printing Preferences] / [Advanced]: Image Color Managment; You might try setting it from 'ICM Handled by Host System' (default) to 'ICM Handled by Printer' or even 'ICM Disabled'.
   Again, this is merely a potential way to check to see if this helps get those colors right; and remember your settings before you change them.
Hope this helps
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved

On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.

On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

When i customize my toolbar and close, the icons are not in the places i put them. how do i make my toolbar set up stay in place?

below file/edit/view/history/bookmarks/tools/help menu line, on second line I have added icons for print, reopen closed tab, session manager, (xmarks)synchronize now, my xmarks, home,duckduckgo, woolik search, stumbleupon, you tube, do not track me, mask me, better privacy, https addon, zoom out zoom in, back forward, private browsing toggle. on the third line i have added icons for gmail-open in a new tab, gmail checker, gmail notifier, last pass and the address bar. there are 2 to 4 separator lines between the icons, grouping like icons, i.e., security, search engines, gmail, etc. each time i close Firefox and then reopen, the icons are no longer in the order i placed them, with separators, or they are not visible and i have to r.click. select "customize," and re-drag and drop the icons and separators where i want them. i am a very, very beginner at this all, but drag and drop i know. why don't the icons/seperators stay in place??
thank you for you help...a. 09 fev. 2013 16h03.

Its problem saving.
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save

Why is it when I save an email with attachments, the attachments are not in the saved email?

Does anyone know why it is when you save an email that has images (attachments) when you go to access the file again with the images, they are not in the document?
The box marked "save attachments" is ticked?
I dont understand
Can anyone help?
Thanks

Is this your Apple account or some other mail?
And are they all in the Inbox of your Mail? If so, rebuild the mailbox. If this is huge, it'll take some time.
IF the images are HUGE, it'll take time to download them from the server to your computer. But once done they should remain there without the need to do anything at all (by default they are already saved).
To click the Save button is to save them somewhere on your hard drive ... maybe to offload elsewhere later.
Actually, you could just as easily save them to iPhoto instead of using Mail to look for and view them. Its a much faster viewing process, and you could set them up by dealers, artists, etc. ... or so I think.

Alerts when emails are not going in Solman

Hi All,
Can we generate email and sms when email is going out and not recieved back in solman system.
Alerting when email not working to solman or from solman, email and sms should be sent to a particular person.
red alert when email Is not going out of SOLMAN
red alert when email are not received bask into SOLMAN
do we need to define any autoreaction method for it?
Regards
Tripti

> I am saying some time all mail goes ok and some time mails doesnot go at all.
> we have external - internet means it goes to our outlook as well as our gmail also.
> SMTP IS alredy configured.
Your mailserver is sometimes requesting authentication and sometimes not. The reason for that can't be found in the SAP system but in the mailserver since that is requesting the authentication.
"Webmail" is the application on top but that is not the system sending and receiving the mail.
The SAP system is out of scope here. I'd check the mail server logs why it is requesting authentication sometimes and sometimes not.
Markus

Incident management error: You are not assigned a Business Partner

Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
Siva

Hi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley

Remote Manage computers that are not on my LAN.

Hi.
i want to be able to remote manage laptops & desktops that are not on my LAN all running 10.6.4
i want to be able to ARD and get logs and even changed settings in workgroup manager if i can.
ideas?
would wide afea bonjour achieve this for me? or is there better options ideas out there.
just a note: i would still like to use apple remote desktop. not some web client like log me in.
and also just a random question, if i have laptops that are bound to the directory but the users home folder is on the device. if they were to change there password on the LDAP / login, mail, CalDAV password. would that update the laptop not on our LAN. so the user has to login with there new password?
you might be asking why: new start up company with a lot people spread across to countries. and i wont to enforce password has to change every 28 days for their login, mail, CalDAV, CardDAV etc.
Message was edited by: -{ jonohayes }-

i want to be able to remote manage laptops & desktops that are not on my LAN all running 10.6.4
I'm not sure I understand the question. ARD isn't limited to machines on your LAN. You can manage any machine you have TCP/IP connectivity to - in other words, if you can ping the machine you can (probably) manage it via ARD.
The only issue you may have is that the Bonjour auto-discovery mode won't necessarily find remote machines - you obviously don't want it scanning the entire internet for available machines, so you can either use the Scanner and define a range of IP addresses to check, or specify the remote machine's IP address directly.
and also just a random question, if i have laptops that are bound to the directory but the users home folder is on the device. if they were to change there password on the LDAP / login, mail, CalDAV password. would that update the laptop not on our LAN. so the user has to login with there new password?
Impossible to answer with the data provided.
If the user's account is on the Open Directory server, then changing the password on the LDAP server will require them to login to their laptop with their new password.
However, it's also entirely possible that the users have local accounts on their machines and just use Open Directory for server-side functions (mail, etc.). In this mode account 'joe' in Open Directory might not be the same account 'joe' on the Open Directory server. As such, changing the Open Directory server will require the user to use the new password for the server-side functions, even though they continue to log on to the laptop with their old account/password.
Only by looking at the machine's configuration will you know which mode you in (or trying it and seeing what happens, I suppose )
i wont to enforce password has to change every 28 days for their login, mail, CalDAV, CardDAV etc.
Personally, I hate this approach. Forcing users to change passwords frequently results in users choosing weak passwords because they don't have time to learn the muscle memory that eases the typing of complex passwords. Moreover what you'll often find is that users choose the same password stub and just append a number on the end - kind of like 'password1' -> 'password2' -> 'password3', etc., which is barely useful.
It's your company, though, and this is just my personal opinion. A better solution hinges on having an effective notification and account revocation process (i.e. if someone's account gets compromised it can be shut down quickly).

When SC is partially rejected my manager no workitems are not going to user

Similar Messages

Maybe you are looking for