When to set iwtUser-role and other per user schema using custom athentication?

I have written my own authentication module and would like to set per user schema on login. Can I write iwtUser-role, iwtCalendarProvider-calendarUserPassword, etc from the authentication class?

Yes you can, after the authentication is complete you get the profile object and then set whatever value you want to set for particular attributes you want to set ..

Similar Messages

  • How to set the router and play the Command & Conquer using direct IP mode?

    My router is WRT54GFirmware Version: v3.03.1
    How to set the router and play the Command & Conquer using direct IP mode with other computer?

    Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
    can you give a few more details.

  • Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.

    Hi All,
    Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
    Both the profile option have set at responsibility level.
    Reagrds,
    Sandesh

    2785222 wrote:
    Hi All,
    Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
    Both the profile option have set at responsibility level.
    Reagrds,
    Sandesh
    Hi Sandesh,
    First note that HR:Security Is for HRMS module for restricting data for respective OUs
    MO:Security is for other Modules such as Inv, PO, AR, AP etc., for restricting data
    Change the inventory Org to the one you want and then query data...
    Hope it helps.
    Regards,
    Shahzad.H.Magsi

  • What can I change to gain access to my work vpn.  I can access with my MacBook Air and other routers.  Can use my ipad and this time capsule to successfully access the VPN.

    What can I change to gain access to my work vpn.  I can access with my MacBook Air and other routers.  Can use my ipad and this time capsule to successfully access the VPN.

    You need to give us a lot more info.
    I presume the MBA and the TC are the combo that doesn't work, although you don't clearly state that.
    If the ipad and TC work.. are you sure the ipad is connected via the TC and not 3G network?
    If it is then the TC itself is fine and the issue might be setup on the MBA.. although if the MBA works with other routers.. that rather confuses the matter.
    You need to actually tell us how the TC is setup in the network. What kind of broadband modem you have and what kind of vpn you are using.

  • I'm using Mountain Lion, kernel_task and other background service are using an awful lot of my memory my memory.

    I'm using Mountain Lion, kernel_task and other background service are using an awful lot of my memory my memory. I can't run any other programs without the beach ball I can hear the hard drive running like crazy in the background.I have 8GB of memory and everything has worked well until recently.
    I am sort of new at posting let me know what other info I can provide
    Thank you
    Howard

    I was noticing the same today.  I have been running this on my Mac Pro circa early 2008.  At the time I notice some sluggish I had three items using over 5 GB of real memory.  kernal_task, iTunes, and Safari.  I did a formal "quit" for iTunes & Safari which reduced the memory down (iTunes was 1.3GB and Safari was 2.0GB).  Here is a screen capture of what is right now.  The kernel_task is at 2.01GB.
    At time of this screen capture my uptime has been:
    up 4 days, 23:37, 2 users, load averages: 1.56 1.70 2.04
    The specs of the Mac Pro is with a lot of hard drive space on the boot drive (50% free) which is mostly my main account user data.  Applications files and other data is actually on a second drive which is also at 50%.  Drive 3 & Drive 4 are RAID 0 used for Time Machine.  RAM is 32GB as the picture denotes.
    I have a MacBook Pro (circa 2011), iMac 27" i7 (circa 2009), and Mac Mini (circa 2010) which don't have any large kernal memory usage.
    Thank you in advance...

  • Useless box pops up in corner promoting twitter and other sites I never use annoying me!

    a useless annoying box pops up in corner promoting twitter and other sites I never use annoying me!

    What you are experiencing is 100% related to Malware.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • I have a work website the I sign into and check my schedule, etc. Sometimes it opens and other times not., it uses webConnect to open.

    I have a work website the I sign into and check my schedule, etc. Sometimes it opens and other times not., it uses webConnect to open.

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • TS2972 My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    You'll have to contact the developer about this. Apple doesn't make this app;

  • Can't Use Video with other Mac users who use AIM

    I know that ichat is compatible for video chats with other pc users who use aim, but does it work with other mac users who use aim?
    Everytime I try to chat with my friend, I get an error message when trying to start of a video chat.
    BTW, I use a iMac G5 with an isight camera.

    Hi Staci,
    For a Bit of Clarity.
    AOL have their Instant Message App. referred to as AIM.
    Apple decided and did a deal with AOL that iChat could join their service Buddy Lists.
    On these Discussions we tend to refer iChat as Logging into AIM, as they are the servers that the Buddy Lists are held on.
    As iChat can also use Bonjour and Jabber, both of which have their own Buddy list window on your Mac. The Jabber side needs you to have a Jabber screen name - so again people differentiate between this and the AIM side.
    I would guess you friend is trying to make it clear that she is using the AIM side of iChat as opposed to the Jabber side.
    As has been said already, the Application side of things also tend to get referred to generically as "AIM" as well.
    The Mac version has stopped and 4.7 and will only Text chat.
    The PC side needs 5.9 to clearly Video or Audio chat with a Mac using iChat. (AIM 6.0 is not stable enough to A/V chat to iChat).
    1:13 PM Saturday; January 27, 2007

  • Why are colors faded when saving from Photoshop? And other weird things...

    I'm working on a file that's a CMYK default US Web Coated SWOP v2 file. I've tried saving to tiff and jpg from this file and both save faded versions. See below:
    Here's how it looks in PS:
    And as a jpg:
    And then another very bizarre thing... I saved it as a pdf to see how the colors would look and when viewing it in acrobat pro, I saw this:
    ....this is the same exact file as the other 2... Nothing was changed other than saving as pdf... Now I have 2 questions!
    Thanks for your help and expertise,
    Sarah

    If you're not having you images printed professionally in publications why are you editing in CMYK.  Displays and inkjet devices are RGB devices CMYK images need be converted when used on these devices. If in every step color management is used  and all devices calibrated well  colors should be quit consistent however color management is not always used and colors will be off  when color management is not done.  Photoshop is color managed is photoshop the only software you're using for your images. No Image viewers, no browsers, no document application etc.
    Also when I save the above image you state is a jpeg Its save as an png file with some Display color profile.  You need yo look into color management and what you useing as your color setting in Photoshop and hd.ow progile mismatches are handle.
    In fact all three image are png file Color mode is RGB 8bit  all have a display color profile all are different in sizes and at least one has different content. All are different yet you claim they are the same.

  • Notification Task needs UME role and other value

    Hi Experts,
    I have a BPM notification task which needs to go to two UME roles (always same) and a UME user (dynamic selection).
    This UME user is already stored in my context data.
    However, when I configure the "To" tab of the notification task, how do I achive this.
    If I select "Choose one or more UME principles" - I can assign the 2 UME roles.  But then how do I get that UME user?
    Please help.
    Thanks,
    Rahim.

    Hi Rahim,
    You want to use an expression and one of the getPrincipal  built-in mapping functions.
    How are your user id and role names formatted? If you have the full UME name you can use getPrincipal  or getPrincipals (for a list of values).
    If you only have the name itself then you use getPrincipalByUniqueName - the identityType parameter is 1, 2 or 3 indicating whether its a user, group or role respectively.  That only returns a single value ... so if you need to process multiple values then suggest you create a EJB-based mapping function using the UMFactory API to do something similar.
    Regards,
    Jocelyn

  • Brand new to Mac and IPad. I have comcast email on my Mac and it works great. My girlfriend has yahoo mail but considering doing iCloud mail when we set up the iPad. Need convincing to use iCloud mail. Any thoughts would be helpful. Thanks

    I'm new to Mac and IPad. I have Comcast mail on Mac and it works great my girlfriend has Yahoo email but is considering ICloud email when she sets up the iPad. Without technical jargon... In iCloud email a wise change? Thank you.

    Welcome to the Apple Community.
    That's really a question for you to answer yourself, changing an email address may not be the best of ideas if it's well known to others. On the other hand iCloud mail is an IMAP account (it syncs between devices) which may be an advantage if your current address is just a POP account.
    I use my iCloud address for secondary mail in conjunction with my main address.

  • Amount of Resources CPU and Memory per user

    Hi,
    We are looking to deploy a Line of Business Application via RemoteApp and a custom template.  The application requires a significant amount of RAM and CPU, can someone tell me who much RAM and CPUs are allocated per session \ user?  I would expect
    that we would use the Standard tier if any difference to resources available.
    Thanks
    Giles

    Hi James,
    Currently there is no way to configure resources other than selecting either Basic or Standard.  If you would like a lower per-VM user density (and thus higher resources for each user) what you can do is create more collections, and only assign
    a small number of users to each.
    For example, say you only wanted to have a maximum of 4 users on each VM, providing typically at least 1 vCPU per user.  In this case you would create collections with the Basic plan, each linked
    to the same template image, and only assign a maximum of 4 user accounts on the user access tab of each.  Assuming each user uses 80+ hours a month, the total (before discounts) cost for each collection would be $228/month, making each user
    cost about $57/month, slightly less than equivalent cost under Standard plan pricing if you factor in resources per user.
    You probably already know this, but I will explain how scaling works normally for others that may read this.  Azure RemoteApp will automatically create more VMs for each collection as needed to handle user load (Scale-Out) and shut down VMs when the
    user load is reduced (Scale-In).  The key thing that affects this scaling mechanism is the maximum concurrent users allowed on each VM, which for Standard is 10.
    In your case you are asking if you can have more resources per user, hence my instructions above for creating multiple collections and limiting the number of assigned users to less than 10 each.
    Depending on your unique needs it may make more sense to create a custom RDS deployment on Azure IaaS VMs.  In this case you could control the size/type of VM used, user density, etc.  Downside is you have to set up and manage more
    RDS components than you do if you use Azure RemoteApp.
    -TP

  • Navigation through a new role and persistence of user properties

    Hi there,
    I have a question related to roles and user-experience in the SAP Enterprise Portal.
    Depending on the preference of the portal user I would like to offer a different navigation by assiging a new role to the user.
    For example initially a role offers the navigation show below:
    Role 1:
    Toplevel navigation:     Entry A        Entry B     Entry C
    After a user request for a different navigation the order of the toplevel navigation changes.
    Role 2:
    Toplevel navigation:    Entry B     Entry C    Entry A     
    In order to realize this, I created two worksets for Entry A. By using merge-ids and a difference in sorting I managed to move the Entry A to the end of the toplevel navigation bar after assiging role 2.
    However I noticed that iView properties set by the portal users under role1 are lost after assigning the role2. Is there any way a user can keep the properties set under a previous role when getting assigned to a new role that has the same page?
    Thanks in advance,
    Arko

    FacesContext context = FacesContext.getCurrentInstance();
    context.getApplication().getNavigationHandler().handleNavigation(context,
    null,
    "<<NAVIGATION STRING>>");
    Thanks,
    Navaneeth

  • HOW TO CREATE ROLE AND ASSIGN TO USER

    Dear all
    1- Create ROLE data_entry
    2- Now open the Form Builder --> open Mennu.mmb --> F4,it open the property pallete --> Set use secturity option
    YES and in Module Role option set Roles --> form_entry
    5- Press F3 (Come back in Navigator Pane) then double click on Mennu, it open Mennu which is attached Forms then
    double click on that one Form which attach Role with it --> click on Item Role --> and attach the Role
    6- Go start Mennu --> Oracle Form6i-Admin --> Build after this it will ask
    ‘Enter System Passwors’ then Give the Local Password.
    'Enter database connection ( e.g. t:node:SID) [LOCAL] ' Give ORCL ( but me confused what should i give over
    here)
    7- Create User DEO Identified By DEO
    8- Grant DBA to DEO
    9- Grant data_entry to DEO
    When i run my application and get login by DEO user then i receive this Error:
    FRM-10247: No activate items in root menu of application.
    please let me know where i am making mistake
    Thanks in advance
    Regards,

    Hi,
    Just check your second point.
    - Now open the Form Builder --> open Mennu.mmb --> F4,it open the property pallete --> Set use secturity option
    YES and in Module Role option set Roles --> form_entryHere, you are using "form_entry" role to the menu but you've granted data_entry role to the user.
    Hence, at run time forms is expecting user with form_entry role, which it's not getting.
    Hope it helps.
    Please mark answer as helpful / correct, if it helps you
    Navnit

Maybe you are looking for