When Uploading a video, I am given a "Online services encountered an error. The Service will now be terminated or paused if possible." How do I fix this? Where did it come from?

When Uploading a video, I am given a "Online services encountered an error. The Service will now be terminated or paused if possible." How do I fix this? Where did it come from?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Similar Messages

  • I am unable to have photos processed from my Photoshop Elements 11 program directly to Costco due to the fact that I am now receiving a error statement saying: "Online services encountered an error. The service will now be terminated or paused if possible

    I am unable to have photos processed from my Photoshop Elements 11 program directly to Costco.  I am now receiving a error statement saying: "Online services encountered an error. The service will now be terminated or paused if possible. 7: NULL ==*in Attributes." How do I get the online services back and running on my PS to allow me to have my photos processed by Costco online? 

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • A new tab is opening when I click anything on a page. Options that should open within the same window are opening in a new tab. How do I fix this?

    I am currently using 16.0.2. I just did the update a day or two ago. Suddenly today, when I click anything on the page, it opens in a new tab. Just moving through the wizard options to get to this point in submitting this issue opened 7 tabs. How do I fix this? I only want new pages to open in new tabs. If I select 'Next Page' or perform a google search, I don't want a new tab to open. This is getting ridiculous. It's the third time this has happened.....always happens after an update from you guys.....and I can never find the fix in your support pages, and have to submit a question.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When I click on "Sign in to Sync" the page "about:accounts" shows error "The URL is not valid and cannot be loaded." How do I fix this so I can use Sync?

    When I click on the three-bar icon (top right) and then on "Sign in to Sync" a new tab opens attempting to load "about:accounts" . . . the page that loads is an error . . . "Problem loading page" shows up on the tab and the page displays:
    The address isn't valid
    The URL is not valid and cannot be loaded.
    Web addresses are usually written like http://www.example.com/
    Make sure that you're using forward slashes (i.e. /).
    Try again
    I am running Firefox 30.0 on a Dell XPS-18 and Windows 8.0.
    I cannot access "about:accounts" at all. How do I fix this?

    The about:accounts page is a valid page in the current Firefox release.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/782039]</blockquote><br>
    When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

    Protocol error usually indicates that the very leftmost part of the URL is not recognized.
    So http://, ftp://, rtsp://, usually work.
    ableton:// would need to be added by some software somewhere...
    Can you get instructions from the vendor? Does these posts seem relevant:
    [http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds&#0093; Bug with Fireforx browser and downloading project?]
    [http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck&#0093; Problem downloading shared sets from Ableton server.].

  • I put songs onto my IPhone 4, and they show up under the "On This Phone" section in itunes, but when I go to play the songs on my phone, they aren't there. How can I fix this?

    I put songs onto my IPhone 4, and they show up under the "On This Phone" section in itunes, but when I go to play the songs on my phone, they aren't there. How can I fix this?

    When you look at your iPhone, are you looking in the Music app or in the iTunes app?  Be sure you are looking in the Music app, and look in the Songs category.  If your songs are not here, you may want to try syncing your information again through iTunes.  To do this, uncheck "Sync Music" and then click apply or sync in the bottom right corner of iTunes, and then recheck "Sync Music" and then click apply or sync again. 
    I hope this helps!

  • When I open an album, thumbnail appear as dotted outlines instead of the image itself. Are my settings set improperly? How do I fix this?

    when I open an album, thumbnail appear as dotted outlines instead of the image itself. Are my settings set improperly? How do I fix this?

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

  • TS2972 First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first

    First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first night.

    The speed may have been ok at that time and is too inconsistent/too slow overall. interference may have proven to be more of an issue since as well. If using public DNS that will provide Intermittant results
    I'm sure using a hotspot would be fine but it depends on your viewing habits. An HD movie is around 4-5GB. It would also be subject to speed. requirements so best to test to see how it compares.
    You would have to check with your Carrier if hotspot it's enabled then just to into your settings and toggle it ON

  • IPhoto 6 "found" old photos - where did they come from?

    When I opened iPhoto 6 for the first time, it updated my iPhoto library just fine. In the process a dialog opened saying it found 134 photos from somewhere, and asked if I wanted to import them. When I said YES, it created a new album and imported those 134 photos into it.
    The photos ended up being old photos (2-4 years old) that I thought I had deleted a long time ago, many of my ex-wife during holidays and a vacation 3 years ago! Where did they come from? Needless to say, my new fiancee wondered why I had old photos of the ex! I thiought they were gone.
    I used Spotlight to search for "IMG_0...) and found many old photos I had deleted! I do not have an old iPhoto libraray on my PowerBook G4, but the photos were still there in folders, deep inside iPhotos filing system. I deleted all the ones I needed to, all by hand within the Finder.
    What happened?

    I had well over 2,000 photos recovered... Also ranging from 5 years old to this past month.
    There was no clear answer but the photos were recovered in large chunks (300 from December, 400 from March, 600 from January, etc...)..
    The entire time I has iPhoto 5, it never worked properly (always crashed) so a lot of these photos clearly were photos not properly saved in iPhoto 5.
    However, I don't see them in my main library. How do I move them from recovered to the Library?

  • Where did this backup window come from on my desktop.  I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing.  Where did it come from?  Thanks for any help

    where did this backup window come from on my desktop. It specifies personal data & settings and tells me when the next backup is scheduled [which I never set up].   I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing.  Where did it come from?  Thanks for any help

    To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

  • When I click the Sections button then click on the 1st page I get  a page that is titled "Lorem ipsum dolor sit amet"! Where did it come from and how do I get rid of it. I have tried deleting and "dont save" but it comes back.

    In Pages when I click the 'Sections'  button then click on the 1st page I get  a page that is titled "Lorem ipsum dolor sit amet"!  Where did it come from and how do I get rid of it? I have tried deleting and "dont save" but it comes back. It is a full page in some unknown language. The only thing I can decifer is 'cupy uf cak'.   Rdal

    Roger,
    The icon is +Sections, not just Sections, as in "Add a Section". When you click that icon you get a section break and and a new section template, complete with preformatted text called placeholder text. The reason "Lorem ipsum" is there is so you can see what the format looks like. The reason that it is Latin gibberish is so you won't get hung up on, or distracted by, what it says. It's just a display of format. Select the "Lorem ipsum" text and start typing your content.
    Jerry

  • I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • When I try to update my iTunes, it tells me that I have the latest version, but I only have 10.6.3 - how can I override this?

    When I try to update my iTunes, it tells me that I have the latest version, but I only have 10.6.3 - how can I override this?

    I'm sorry but your post seems vague as to exactly what version of what you are running, therefore, it comes as a surprise that you mention that "it" won't let you update iTunes. Did you run Software Update or try updating from within iTunes?
    If you are running a Mac under Mac OS X 10.6.3, then if you should be able to update that by using System Update to version 10.6.8 - first and foremost.
    Then, assuming you can run Mac OS X 10.6.8; I would think that you can (secondarily) update iTunes to Version 10.7 or Ver. 11.0.5.; IMHO 10.7 is better as it has Coverflow. Nonetheless...
    Regards

  • I have an iphone 4s and i over purchased by $15 from the appstore. in other words, i owe the appstore $15 . however, when i made a deposit of $20 into my card and tried to pay the appstore it says my payment method was declined.  how can i fix this?

    i have an iphone 4s and i over purchased by $15 from the appstore. in other words, i owe the appstore $15 . however, when i made a deposit of $20 into my card and tried to pay the appstore it says my payment method was declined.  how can i fix this?

    Device Manager which is in Control Panels
    I strongly recommend AIDA64 to show everything, temps, fans, chips, drivers and versions
    http://www.aida64.com/ Windows has better tools to show you every service and knick and cranny
    https://discussions.apple.com/thread/2769294
    http://realitypod.com/category/hacks-and-cracks/mac-hacks-and-cracks/
    MacBook definitely uses Cirrus - probably iMac

  • TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing.  How do i fix this?  Thank you in advance.

    When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing.  How do i fix this?  Thank you in advance.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • After pacman update I am unable to sync to repos [SOLVED]

    With the current pacman I cant sync or install gpg master keys. I recieve this error code:  " :: Synchronizing package databases... error: failed retrieving file 'core.db' from mirrors.kernel.org : Connection time-out error: failed retrieving file 'c

  • Emailed Smartform Not Producing a Spool ID

    Hi, I'm trying to create a spool ID when I email my smartform.  The emailing works but when I call the smartform function module the table JOB_OUTPUT_INFO-SPOOLIDS isn't being populated. I'm passing the following parameters to my smartform: OUTPUT_OP

  • What is the filed in ORDRSP idoc to stop changes in PO?

    Hi, SO gets created from PO and when ORDRSP idoc comes from SO to PO, there should be filed in the IDoc that will not allow to change PO anymore when ORDRSP is received to PO. Could anyone let me know the filed in IDoc and where in that will be in th

  • How can I effectively enlarge font size in Firefox?

    My laptop resolution is 1900x1200 so the default font size is very small. I tried to increase the font size through Preferences>Content>Default font BUT it doesn't work well with a lot of sites. It corrupts the layouts so I had to change it back to d

  • Radiobutton

    Hi Experts, This is Prabhakararao I have a small problem. I had taken two Selection-screens. One having 3 Radiobuttons and second having 2 input fileds. Whenever i executes a program if i click 1st radiobutton on first selection screen then 1st field