When using CORBA I get an Attribute validation error for CFOBJECT

Any ideas about whats going on here?
The value of the TYPE attribute, which is currently ”CORBA”, must be one of the values: CORBA,COM,COMPONENT,JAVA,DOTNET,WEBSERVICE,.NET.

Here you go...
code:

<cfscript>
session.TargetService = createObject("CORBA","NameService","Target.TargetService");
</cfscript>
<cfdump var="#session.TargetService#">
screenshots:
ColdFusion Version: This is ColdFusion 10,283111
JVM Config (slightly redacted):
Message was edited by: Ched Cheatham

Similar Messages

Getting mandatory attribute validation error when the value is defaulted through customization

Hi
I am getting Mandatory attribute validation error when we default the value through customization.
In the UI we have attribute called Last Name which is mandatory at EO level. Customer wanted to default Last name to some value, through page composer it is defaulted to some text and saved.
When ever we open the page the the same value is defaulted as Last Name and appearing in the UI. But when we submit the page, EO level validation is failing. hence we are getting last name is missing.
When i debug the code last name attribute value for EO is blank.
In the UI the attribute last name is associated with bindings --> #{bindings.lastname.inputvalue}
The validation is failing if we remove the default binding associated with inputtext box.
Can some body help what can be reason and is there any solution?
Thanks,
Praveen

version 12.1.2
I am struggling with same situation, I can't set the default value at business component because, the default value comes from a REST service at run time. In page A, I have a field F1 that contains value from REST service. Page B has a database bound field F2, whose default value should come from F1 in Page A when a user navigates from Page A to Page B. If I set the value of F2 to be the value of F1, then it displays the value in the UI, but nothing gets submitted to EO and fails at commit.
To make things difficult, here is my situation: Page A lives in bounded taskflow TF1, and Page B lives in bounded taskflow TF2. So I have created an input parameter P1 in TF 2, which carries over the value of F1 in Page A to Page B. When I am in Page B, I can successfully see the value of the taskflow input parameter P1. So, how do I programmatically set the value of field F2 with the value of input parameter P1?
I tried setting the F2.inputValue in a method call M1 in taskflow TF2 prior to Page B, but I get null pointer exception as it can't see field F2 yet.
It seems like a simple thing to do, but I have spent a lot of time trying to make it work without any success.
I would greatly appreciate any guidance.

Attribute validation error for tag CFQUERY

I have a CF application that's running fine on a shared host. I now have a VPS running version of CF 9. When I try to use this on the VPS, I get the following error:
Attribute validation error for tag CFQUERY.
The value of the attribute datasource, which is currently '', is invalid.
The datasource is being set in application.cfc, and again works just fine in the shared environment.
The only differences is the shared is running on Windows, and the VPS is Linux. Also, the Windows is running version 9,0,1,274733 and the Linux is 9,0,0,251028
Any help would be greatly appreciated.

bbholdem wrote:
I have a CF application that's running fine on a shared host. I now have a VPS running version of CF 9. When I try to use this on the VPS, I get the following error:
Attribute validation error for tag CFQUERY.
The value of the attribute datasource, which is currently '', is invalid.
The cause of the error is obvious. Somewhere in your application, the cfquery tag is used as follows, with an empty string as datasource:
<cfquery datasource="">
</cfquery>
That is a mistake. The error message should tell you where that occurs.

Validation error for tag cfloop

Hi All,
Complete newbie to CF here. I've inherited (or bought) an online business which has its site written in CF. I haven't done this sort of stuff before but do work SQL for a living and object oriented stuff plus have done a bit of html and php so CF isn't mind blowing to me (in its simple form).
I've downloaded my site on to my computer to run a local copy that I can hack to pieces if needs be. For some reason, I have a few problems with the site running locally. The first error I'm getting is a Attribute validation error for tag cfloop.
Basically, index.cfm has this bit of code in it:
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
    <cfinvokeargument name="storedProcedure" value="usp_GetFeaturedWineries">
</cfinvoke>
Ok, easy enough. Anyway, there's a call down the page to:
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
Within displayFeaturedWineries.cfm is the code that calls the stored proc invoked above:
<cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Bam, that's where the error occurs. "The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.
What??? The stored proc exists and it only returns two records (which begs me to wonder why you would have startrow and endrow but anyway, it doesn't work with or without it).
The other interesting thing is that this works on production, NO PROBLEM!!! WTF? How can it work on production but not locally.
The only thing I'm starting to think is:
a) I've missed a setting somewhere in CF or
b) I'm running Apache as compared to IIS or
c) I'm running SQL 2008 and CF 9 which will no doubt be different to the production host server.
Should B or C be causing THAT type of problem??
Thanks,
Matt

I'm not sure what code apart from the above is going to show you what you could possibly need to solve this, but here goes. The following is only snippets of the code, but they are the relavant snippets. Other stored procs work. The cfdump for getFeaturedWineries_qry shows 'usp_getFeaturedWineries'. I know its there because I've been unable to run "EXEC usp_getFeaturedWineries" after copying it straight out of the code. As previously stated, there are other stored procs which are running fine.
datasets.cfc
    <cffunction name="storedProcedure">
        <cfargument name="storedProcedure" required="Yes" type="string">
        <cfstoredproc procedure = "#ARGUMENTS.storedProcedure#"
                      datasource = "#REQUEST.DSN_NAME#"
                      username   = "#REQUEST.DSN_USER#"
                      password   = "#REQUEST.DSN_PASS#"
                      returncode = "Yes">
            <cfprocresult name="storedProcedure" resultset="1">
        </cfstoredproc>
        <cfreturn storedProcedure>
    </cffunction>
application.cfm
    
    <cfset DSN_NAME = "boutiqueWineriesTest">
    <cfset DSN_USER = "coldfusion">
    <cfset DSN_PASS = "coldfusion">
index.cfm
<cfobject component="#COMP_REF#.datasets" name="datasets">
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
    <cfinvokeargument name="storedProcedure" value="usp_getFeaturedWineries">
</cfinvoke>
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
displayFeaturedWineries.cfm
         <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Attribute validation error for tag cfloop.
The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.                                                                                  The error occurred in C:\apps\iishome\includes\displayFeaturedWineries.cfm: line 33
Called from C:\apps\iishome\index.cfm: line 399
Called from C:\apps\iishome\index.cfm: line 79
Called from C:\apps\iishome\index.cfm: line 1
31 :      <tr>
32 :           <td width="626" colspan="3" class="productCenter_bg2">
33 :          <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
34 :              <div class="productCennews">
35 :                  <table border="0" cellspacing="0" cellpadding="0">

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message 'An error as occurred. Please try again later'. It has been this way for some weeks. I don't have this problem using Safari or Opera.

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.

I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck.

Firefox opens websites when hard wired to router, but when using wireless I get a server not found message.

Firefox (3.6.10) opens websites when hard wired to router, but when using wireless I get message: SERVER NOT FOUND FIREFOX CAN'T FIND THE SERVER AT SEARCH.AVG.COM. My homepage is http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official. My anti-virus is AVG free 8.5.448. What can cause this?
If Work Offline is checked in Firefox File, I can get to Google search site. When I un-check it I still get the Server Not Found message

Did you check the connection settings?
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

Attribute Validation error.

I keep getting this error. It is so damn vague.

Exceptions
13:27:07.007 - Template Exception - in D:\Coldfusion
Applications\b2\security tests\control.cfm : line 34
Attribute Validation error.

When I want to get an app, an error message comes up saying I need 3.0 software update. How do I get my ipod updated in itunes, when itunes says my ipod is already updated?

When I want to get an app, an error message comes up saying I need 3.0 software update. How do I get my ipod updated in itunes, when itunes says my ipod is already updated?
OR if I cannot update to software 3.0, how can I find apps that will work just for my ipod touch?

It sounds like you have a 1G iPod Touch, in which case you can only upgrade to iOS version 3.1. Here is a link to purchase the update.
http://support.apple.com/kb/HT2052
B-rock

Need help... Context validation error for tag cfscript.

Code:
    <cffunction name="computeHash" access="public" returntype="String">
      <cfargument name="password" type="string" />
      <cfargument name="salt" type="string" />
      <cfargument name="iterations" type="numeric" required="false" default="1024" />
      <cfargument name="algorithm" type="string" required="false" default="SHA512" />
      <cfscript>
        var hashed = '';
        var i = 1;
        hashed = hash( password & salt, arguments.algorithm, 'UTF-8' );
        for (i = 1; i <= iterations; i++) {
          hashed = hash( hashed & salt, arguments.algorithm, 'UTF-8' );
        return hashed;
      </cfscript>
    </cffunction>
Error on web app:
Context validation error for tag cfscript.
The start tag must have a matching end tag. An explicit end tag can be provided by adding </cfscript>. If the body of the tag is empty you can use the shortcut <cfscript .../>. The CFML compiler was processing:
a cfscript tag beginning on line 11, column 12.
a cfscript tag beginning on line 11, column 12.
The error occurred in xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\salty.cfc: line 11
9 :        <cfargument name="iterations" type="numeric" required="false" default="1024" />
10 :        <cfargument name="algorithm" type="string" required="false" default="SHA512" />
11 :        <cfscript>
12 :           var hashed = '';
13 :           var i = 1;
I am completely lost on why it's fumbling with why it says there's no closing tag. Help!!!!
Thanks

What's on lines 1-7 of that file?
That code compiles fine for me on CF8 & CF9, so that's not where the error is.
You're not trying to compile it on any earlier version of CF than CF8 are you? The < and ++ operators are not valid prior to CF8. CFMX7 might see the < as a stray angle bracket, and get confused. I don't have CFMX7 running here to test the exact error that would produce, sorry.
Adam

Validation error for af:selectInputDate

I am using af:selectInputDate with af:convertDateTime as follows:
<af:selectInputDate styleClass="date" id="selectInputDate1"
     partialTriggers="myCombo"
     value="#{myBackingBean.myDate}"
     disabled="#{myBackingBean.dateDisable}">
     <af:convertDateTime pattern="MM/dd/yyyy" id="convertDateTime patternED"/>
     </af:selectInputDate>
When user enters an invalid date, the validation error message comes in a popup, which is fine. But the same date component when used in another panel of the same JSP behaves differently. In some cases validation error message is displayed on the same page, and this moves the other components away. In some cases e.g. if we enter 20031 instead of 2003 for year, it saves the value as 5569. If there is a letter in the date it is just ignored. (In the earlier panel all this is shown as error in the popup) .
I'd like the popup behaviour always. Pls help

I had same problem I resolved it by adding id of my InputComboboxField in its won PartialTriggers : component's Id
in your component property
Id:employeeId
add same
PartialTriggers:employeeId , and it will jsut disapper......
Deepa Pathre
Edited by: Deepa on 2/06/2011 20:28

Order of the validation error for mandatory properties

Hi,
I have created mandatory Properties in KM Configuration.I have configured in such a way that the properties are shown while uploading a file.Now when I upload a file without filling the properties it shows the validation error for the properties but it is not shown in the order of the properties mentioned in the property Groups.
Everytime the error is shown in a random order.
Please advise me whether I am missing something in the configuration.
Thanks in advance
Sowjanya.

Hi,
is it possible, that someone inserted data with a different GC as parameter than your actual group currency is?
otherwise: I had the same problem, but I actually don't know the reason. I changed the validation rule:
before i had: VAL_YTD( write-offs cap. assets BS ) = VAL_YTD( write-offs PL)
now i have: ABS( VAL_YTD( write-offs cap. assets BS ) ) = ABS( VAL_YTD( write-offs PL) )
ABS = absolute value (no sign, only values).
You could also do it like that: ABS( VAL_YTD( write-offs cap. assets BS ) ) - ABS( VAL_YTD( write-offs PL) ) = 0
PS: To have the amount 0 in a validation rule is a restricted perspective. Never forget that!
Not only for the validation - it is always absolutely important to make sure which perspective you have choosen. Check the parameters, check the rules, the selections etc.
BR

CFCHART only works for pie, invalid attribute: autoAdjust Error for all other types

CFCHART only works for pie, invalid attribute: autoAdjust
Error for all other types.
Im just trying to render a simple bar chart, and it works on
the developer server, but not in production.
Any tips?
Dave

It's 7.0.2
But I have not tried this yet...
ColdFusion MX 7.0.2 Cumulative Hot Fix 2
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400996
I'm worried that If I apply that hotfix, something else will
break :(
ANd I wont be able to un=do it, and I'm not able to
re-install CF if it all goes tits up.

How can I use database constraints in entity attribute validation rules

I am interested in using database constraints to validate attributes in entity objects.
I would like to implement a JboValidatorInterface in a way that I can use an operator like "GreaterOrEqualTo" to compare with values retrieved from the database for a column associated with an entity object attribute.
I have used this pattern with success in other environments, where the user community decides the minimum value for a thing should change from x to y, and simply changing a database object also changes the validation methods of all applications which access it.
I am not certain that column constraints are the appropriate vehicle, but so far that seems to be the case.
I see that you can create a validation rule which makes comparisons against a view object attribute. I am wondering if there is a generic way to use standardized names for column constraints along with ADF hooks into properties of database columns, to avoid writing individual queries for each attribute.
Thanks in advance!!!

Jeffrey,
If you already have constraints on the underlying tables, why do you need to validate them in ADF BC? You can certainly use some framework extension classes to give the user nicely formatted error messages - see ER: ADF BC - allow custom error msgs for common exceptions (e.g. DML) for more details.
I am using this method so that anything that is enforced in the database (check constraints, foreign keys, unique constraints, etc) are not enforced in the ADF BC layer as well - after all, there's more than one way to get data into a table, and DB constraints ensure that even if data gets in through another mechanism (apart from the ADF application), it is valid. My 2 cents, of course.
Hope this helps,
John

Weird attribute validation error

Hi!
I'm trying to get an XML message to validate in Spring WS. I have the following XML Schema:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema version="1.0"
           xmlns:xs="http://www.w3.org/2001/XMLSchema"
           elementFormDefault="qualified"
           targetNamespace="http://namespace.lantmateriet.se/distribution/products/geoaccess/admindirekt/v1"
           xmlns:app="http://namespace.lantmateriet.se/distribution/products/geoaccess/admindirekt/v1">
<xs:element name="FindCountyRequest">
    <xs:complexType>
      <xs:choice>
        <xs:element name="id" type="xs:string" form="unqualified"/>
        <xs:element name="name" type="xs:string" form="unqualified"/>
      </xs:choice>
      <xs:attribute name="detail" use="required">
          <xs:simpleType>
              <xs:restriction base="xs:string">
                  <xs:enumeration value="GENERAL"/>
                  <xs:enumeration value="DETAILED"/>
              </xs:restriction>
          </xs:simpleType>
      </xs:attribute>
    </xs:complexType>
</xs:element>
</xs:schema>When I send the following message...:
<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope"
               xmlns:app="http://namespace.lantmateriet.se/distribution/products/geoaccess/admindirekt/v1"
   <soap:Header/>
   <soap:Body>
      <app:FindCountyRequest detail="DETAILED">
         <id>21</id>
      </app:FindCountyRequest>
   </soap:Body>
</soap:Envelope>...I get this error:
WARN XML validation error on request: cvc-complex-type.3.2.2: Attribute 'detail' is not allowed to appear in element 'app:FindCountyRequest'. at org.springframework.ws.soap.server.endpoint.interceptor.AbstractFaultCreatingValidatingInterceptor.handleRequestValidationErrors(AbstractFaultCreatingValidatingInterceptor.java:154)
WARN XML validation error on request: cvc-complex-type.4: Attribute 'detail' must appear on element 'app:FindCountyRequest'. at org.springframework.ws.soap.server.endpoint.interceptor.AbstractFaultCreatingValidatingInterceptor.handleRequestValidationErrors(AbstractFaultCreatingValidatingInterceptor.java:154)What?! How come it says that I must have the attribute and that, at the same time, it is not allowed?
Any ideas?
Thanks!

I've come to the conclusion that the attribute is in the wrong namespace.
How do I fix the schema so that the message validates?

When using CORBA I get an Attribute validation error for CFOBJECT

Similar Messages

Maybe you are looking for