When viewing history, does the timestamp reflect the time the document was saved, or when it was accessed?

When you are viewing the history in FormsCentral response spreadsheet, does each dot represent a save? Does the timestamp mean time saved, or time accessed? I am talking about when someone goes in and makes changes, and history records their name and the time.

Thanks for the advice, I'll have to do a bit of time travel to sort it out!
Don't you have Time Machine on your Mac?
Seriously, if your photos have been imported with the wrong time zone setting, I'd apply a keyword to the photos that need time zone correction, perhaps the necessary time shift, and remove it after you corrected the time zone - this way you willknow, which photos have tiime zone fixed applied and which not.
You can fix the times with the command "Photos > Adjust Date and Time".
To be sure of the time zones that iPhoto has assigned to your imported photos, make iPhoto display the time zone. This can be done in the System Preferences.
Quit iPhoto, if it is running.
Open System Preferences > Language & Region. panel
Click the "Advanced" button in the lower right corner.
Click the "Times" tab in the "Advanced" panel.
Drag a time zone indication (GMT+1) to the time formats. Press o.k.
Now restart your computer and restart iPhoto.
Now select a photo where you are very sure of the exact time it has been taken - early morning or similar, and look at the date tag in the Info panel. What do you see?
My current system time is set to GMT+2.
When I am looking at a photo taken early in the morning and imported in Alaska, eleven hours behind my current time zone, I am seeing this in iPhoto: The time is correct, 07:53 in Alaska time, but shown as afternoon in my time zone 16:53 GMT+2.
You only need to correct the time, iPhoto did not shift the time as in the example above.

Similar Messages

If I open the same document with two different apps on my iPhone does the document get saved twice?

For example, I chose to open a .pdf document I received as an attachment with Adobe Reader or iBooks, and now the document is available anytime I open Adobe Reader or iBooks. My question is if these applications are able to open the document anytime they want then the document must be available somewhere on the device, where do they get saved? And do they get saved twice if I opened the same document once with iBooks and once with Adobe Reader?

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Display action "Resubmit" and "View History" in the UWL workitem

Hi,
When i click on the workitem for approving leave(ESS - Leave request", the button "Resubmit" does not appear. Secondly, even the link "View History" does not appear.
Can anyone please tell me how this is to be done.
Regards,
Pinki

Hi ,
Down load the uwl xml file which you use and check the file as mentioned above
Action to exclude properties tags
Maybe some one removed those buttons by editing xml file
Koti Reddy

Why does the document window in illustrator cs6 move to the far left when I reopen the file?

why does the document window in illustrator cs6 move to the far left when I reopen the file?

Hi John,
thanks for the fast response. cs5 remembered the window position. I like having the window in the middle as I have a 27" monitor. I just upgraded to cs6 yesterday and I'm sure it was remembering the window document position. I think. If i find out how to fix this, I'll post it here.
And while I'm on the subject of cs6, why the f*** did adobe combine the stroke and swatches pallettes? Now I forever have to click stroke and swatch tabs all day. And I love the army and navy file icons of photoshop and illustrator. I won't comment on Acrobat X. ; (

HT1430 where does the backup get saved on the windows computer?

whenever m tryin to backup my phone it starts and after consuming the space on the hard drive of computer it stops after the msg saying bakup could nt b saved on the computer.. so my question is where does the backup get saved on d computer n how to access it n hw to clear the old backup history n free the space on the computer? help plz...

WHERE ARE BACKUPS LOCATED
ITunes stores one active backup and each time a backup is created the old backup is overwritten. Icloud saves the last three backups. You cannot view the backups unless you have special software to read it. If you want to know where the backups are located on your computer then read this article
http://support.apple.com/kb/HT4946

Does the Document Id remain static?

I have an application that creates many versions to a versioned file as follows.
abcd.doc id, getId()=12345
-----version 1 abcd.doc, getId()=12346
-----version 2 abcd.doc, getId()=12347
-----version 3 abcd.doc, getId()=12348
-----version 4 abcd.doc, getId()=12349
To get the contents of the file, my application always calls getPublicObjectbyId(12345).
Lately, I've been finding that occasionally, the ID for the versioned file changes. So, I get an object not found when going after 12345. This happens very rarely (1% of the time).
Does the document ID for the parent file ever change? I was under the impression I could rely on that remaining constant for the life of the object.
Does ifs ever run out of numbers and start from the beginning?

never. object IDs in iFS are permanent. in fact they are based on a database sequence, which is monotonically increasing. the ID of your "parent" document will never change. if the document is deleted, the ID will never be reused. iFS will never "start over" back at the beginning, and iFS will never run out of IDs. never in a million years. actually longer. way longer. The ID sequence is a Java Long which is on the order of 2^63.
when you try to get a PublicObject by ID but get a "object not found" error, it's not because the ID changed. perhaps you don't have access, or perhaps the document was deleted. make sure to turn the IfsException to verbose mode and look at the whole exception stack.

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.

Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu

Import Error: The document was created with an unsupported version of Word.

This is the message I get when opening up a Word doc from a cross-country client:
*Import Error*
The document was created with an unsupported version of Word.
Unfortunately, he's out of touch for the next week so I have no idea which version he is using...although a look using BBEdit reveals this in the footer of the doc: Microsoft Word for Windows.
Is there a list of supported and unsupported versions of Word, so I can be prepared for my next encounter with this message?
Message was edited by: Alan Bucknam

If you can open it up, is the formatting of great importance, or is it just the information you need? If its info, copy from BBEdit and paste into your Pages doc. Sometimes you can open it in text edit and then save as a different format. (I think its text edit, one of the OSX word processors opens word docs ok.)
Sorry, this also appears as a problem in Numbers (believe it or not, its also a problem with Office 2007 for windows too). The explanation gets a bit complicated, but there are so many variations of how a M$ document is created. (not all docs are made by M$ products remember, but exported from other programs on different systems, even if it says "Word for windows").
Because of the varied amount of things that can be wrong (that M$ products seem to overlook, or fill in the gaps that would normally cause an error), there is no hard list of non-compatible versions.
This is just as we ( a bunch of nerds here and around the web), have found out from experimenting with different versions and such.
hope this helps and hope the copy paste or save as works for you.

Displaying Screen After the Add Button is pressed and the document is saved

Hi All,
I am trying to the Display the Landed Cost screen after the Goods Receipt PO has been added and Saved.
My code below: If pVal.ItemUID = "1" And pVal.FormTypeEx = "143" And pVal.FormMode = SAPbouiCOM.BoFormMode.fm_ADD_MODE And pVal.BeforeAction = False Then
 If pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
 Dim oMenuItem As SAPbouiCOM.MenuItem
 oMenuItem = SBO_Application.Menus.Item("2310") 'modules 2310 is the Landed cost screen'
 oMenuItem.Activate()
 End If
 End If
It displays the landed cost screen when i Click the add button, But I need to display it after the the document has saved, ANy inputs on the same!
Your help is appreciated!!!

Hi Vinayak,
Change the code
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
to
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
And it will work.
Best Regards,
Nick He

Suddenly I can't open one document in inumbers: "The sheet can't be imported. The document was created with an unsupported application version."

Yesterday I worked on a inumbers document on my mac mini. No problem. 3 hours later I would open the same document on my ipad. It told me that there were 2 versions and I had to choose one (surprisingly bouth had the same time/date). Since then I can't open this document anymore (regardless if iphone, ipad, mac mini): "The sheet can't be imported. The document was created with an unsupported application version." I worked on this document more than 1 year only on my ipad, iphone, imac... how can i get it worked or back? Other documents are still working properly.
Thanks for any hint.

The first part of the warning message was in german, so it's probably not translated as it really appears in englisch:
Massage on IPad and IPhone: "Tabelle kann nicht importiert werden. The document was created with an unsupported application version.
Message on mac mini: ""Verbrauch.numbers" kann nicht geöffnet werden"
What changed since is also, that the mini privew for this document no more exist; it shows just the inumbers icon in the sheet. The other documents around this one appears with preview and can be open, e.g. are working fine.

[CS6]Get the app version in which the document was first created

Hi All,
Is there a way to get the application version in which the document was first created?
Eg: I have a CS6 plugin in which I want to know wether the current document was originally created in CS3 or CS5 or so on.
Any help will be highly appreciated.

I hope that's what you're looking for
        const char* szFileName = "path_to_indd_file";
        FILE* pFile = fopen(szFileName, "rb");
        fseek(pFile, 0x1D, SEEK_CUR);
        int32 ver_maj, ver_min;
        fread(&ver_maj, sizeof(int32), 1, pFile);
        fread(&ver_min, sizeof(int32), 1, pFile);
        switch (ver_maj)
            case 5:
                CAlert::InformationAlert("CS3");
                break;
            case 6:
                CAlert::InformationAlert("CS4");
            case 7:
                ver_min == 5? CAlert::InformationAlert("CS5.5"): CAlert::InformationAlert("CS5") ;
                break;
            case 8:
                CAlert::InformationAlert("CS6");
                break;
            case 9:
                CAlert::InformationAlert("CC");
                break;
            default:
                CAlert::InformationAlert("Unknown version");
                break;
        fclose(pFile);
Regards
Bartek

Every time I open a document on my Apple Mac a copy is saved to My Documents which I don't want. How do I stop the documents being saved automatically all the time??

Every time I open a document on my Apple Mac a copy is saved to My Documents which I don't want. How do I stop the documents being saved automatically all the time??

OS X Lion- About Auto Save and Versions
You cannot disable this.

Why can't I view my edited projects in the documents after saving from PSE10?

Aftrer I work on a project and save it, it is unable to be opened as a file in the document folders on our server. I can still open and view it in the photoshop program but not on its own. Thus, I cannot attach the finished products on web sites, etc. When I go to open the file, a blank Adobe screen pops up with a message that says something like 'cannot open this file because damage has been done to it.'
We have the program on two computers in the office (the max), and this is not happening on the second computer. What happened, and how can I fix this?
This is what comes up:

I should note that this problem did not occur before, and I could open the files easily in the saved documents whether I saved them as a jpeg, etc. Now when I want to view them, I can only view them in the Organizer. In the computer Documents file, the Adobe logo shows up rather than the thumbnail of the edited product. I am not trying to attach these in an e-mail and know that if I want these as a picture I need to save it as a JPEG. But, like I said, this was not a problem before and just started happening. Even when I want to upload the file on the web site, the error message comes back at me stating that it cannot open the file.
Not only do I have problems viewing my own Adobe Photoshop files but other finished products from others when I want to save and open the file. (We have a management group that helps to create templates for certain products in our office, and that is what I am referring to.)
WHAT IS GOING ON?!

In Trex where does the documents reside ?

We have Enterprise portal and use TREX for collaboration rooms and document indexing. EP is a java only Netweaver stack on AIX and TREX is on a window box. What I wanted to know is where do the actual documents, which TREX indexes reside?
Does Trex retain a copy of the indexed document? For a particular index where is the mapping of the actual document? Where can I look at all this data?
Pls advise.
thank you
regards
Laxmi

Hello Kai,
documents original location is transparent on KM, whether it is on a external repository or not doesn't matter,
for KM and TREX it is part of repository manager (configured at System Administration > System Configuration >
Knowledge Management > Content Managenement > Repository Managers).
Once a repository manager is activeted, there are several services running on top of it, eg.: subscription, rating,
etc. and other global services which affects every repository. Crawler service and Index Management are the
global services which will do indexing work
In fact TREX doesn't look for documents, the crawler is the component that retrieves the documents and
deliver for TREX. Have in mind that the crawler is part of KM, not TREX. It is active for every repository,
you can check on the monitor at System Administration > Monitoring
for more information: http://help.sap.com/saphelp_nw70/helpdata/en/fb/38ef207d0a47ee9dc08deeed855392/frameset.htm
once documents are retrieved by the crawler and is at TREX hands, it will index normally, it uses
a file system based architecture, if you browse through TREX server you can find the indexes you have
created as folders and documents information inside. Be careful when checking at file system level, data
there is designed for TREX work only, it doesn't serve as backup and can't be considered for any
other functioning.
kind regards,
Rafael

Where does the Document publisher used in Duet Entp. reporting reside.

Hi All,
I was reading on the architecture of Duet Enterprise reporting given in [this MSDN link|http://technet.microsoft.com/en-us/library/gg385205.aspx]. I wanted to know where the Document publisher and where the reports queue reside (SAP Backend or SCL) as explained in the diagrams in the above link.
Appreciate any help in understanding this architecture.
Regards,
Avishek.

Hi Binosn,
Thanks for your interest and reply.
Wanted to know some more details regarding the document publisher.
How does the backend push the report to the Gateway, is there also a queue maintained in the backend system which processes the report requests asynchronously or the Gateway report publisher pulls them synchronously or is there any component necessary to be installed in the backend system for processing reports?
Is the document publisher feature a gateway feature or a Duet Enterprise specific feature?
Please suggest some material for further details if available.
Regards,
Avishek.

When viewing history, does the timestamp reflect the time the document was saved, or when it was accessed?

Similar Messages

Maybe you are looking for