When we clicked on Update for new pricing,condition type is repeated twice

Hi Friends,
For new pricing,I clicked on the Update pushbuttion in the conditions tab of sales order,Condition type is repeated twice .So value is increased.I checked in the pricing analysis,it is showing only once.
I searched all threads and I tried all the possibilities.
I checked exclusive indicator,it is correctly checked.
Condition type manual entries selected as B automatic as priority
Item condition check box is checked only.
Mandatory check box is selected in the Pricing procedure for that condition type.
Anything i missed out .
Please suggest me how to go.
Thanks in advance.
Rgds....VM
Edited by: vm on Nov 2, 2011 5:55 PM
Edited by: vm on Nov 2, 2011 5:56 PM

Condition type is repeated twice
Ensure that the pricing condition is not maintained for multiple combinations in VK11
G. Lakshmipathi

Similar Messages

How to change exchange rate type for specific pricing condition type

Hello every one,
I have a requirement for billing ie VF01.
currently all the exchange rate are being calculated with exchange rate type 'M' by default.
but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
Please any body can help me with the exit and code which i can use.
I have checked exits SDVFX008.
but how to change exchange rate with type 'E' only for two conditions.
as changing exchange rate at document header will change exchange rate for all condition type.

You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
Link to refer for selective runtime analysis - Runtime Analysis for VOFM
Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line). How can I avoid this?

When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line). How can I avoid this?

Try validating your installed fonts and fixing any errors that show up. To do this see this article: http://reviews.cnet.com/8301-13727_7-20085570-263/safari-in-os-x-lion-replacing- text-with-block-a-characters/

Problems in New Pricing Condition type

Dear SDN'ers!
Please help me to know if this is doable. Here is my requirement
If a line items qualifies for the per title unit minimum, but not the per order minimum no discount will be applied and vice versa, if a line item qualifies for the order unit minimum but not the per title unit minimum no meet comp discount will be applied.
Two new condition types will be configured say
ZCN1 - Group Condition say for e.g. 100 per order
ZCN2 - Item level condition say e.g. 10 per line item
Individually this is working when the order meets group condition ZCN1,i.e. 100 items and if line item meets ZCN2 i.e. 10 items the discount is applied. Currently the customer is getting the discount either way.
In simple words for each line item to qualify for discount it should meet both ZCN1 AND ZCN2, otherwise no discount order or item level discount should be applied.
I tried in USEREXIT_PRICING_PREPARE_TKOMP and USEREXIT_SAVE_DOCUMENT_PREPARE in MV45AFZZ.
Since its working individually, I added check condition to see if XKOMV-KBETR value is not equal 0 for both ZCN1 OR ZCN2. If either of this is zero then it would have failed in one of the condition either order level or item level.
I have to modify the XKOMV-KBETR value for ZCN1 & ZCN2 to zero i.e. no discount. It displays correctly in the screen but it doesn't update the database. When i go to KONV and check the value its still showing the old discount.
Appreciate any help
Regards,
Badri

Hi Badrinath,
Please try pricing requirements in VOFM.
T/code VOFM> Requirements> Pricing > you can copy Standard routine (Price Change)> Write your own logic .
Hope this may help you.
Lanka

Creating new pricing condition type in srm ecs

Hi Guru's
I see that there is an option to select the Source system " local" , "other system, eg: R/3" while creating a new condition type in SRM. can you please let me know what is the importance of this? can we determine price in srm using backend pricing conditions? can we invoke the backend pricing procedure from srm and populate the price in SRM PO?
any helpful info would be appreciated
regards
deepu

Hi Nitin,
Appreciate your response. Can you please let me know how major development is it? if you can provide highlights that would be helpful. I do understand that we can customize the pricing procedure in SRM. Can you please share if you have any documentation regarding creating new condition types, access sequences, condition records in SRM similar to ECC? it would be appreciated if you can send it to pradeepwsu(gmail) id.
Thanks in advance
Deepu

How to add a new line item when i click on UPDATE in orderpage B2B webshop?

Hi Gurus,
I need to add a new line item based on some condition when i click on update in the order page in b2b web shop. Is there any way to pass some parameters to the BADI crm_isa_basket_items and create a new line item when i update? If so can you please tell the parameters that i need to pass to the badi.
Any help will be highly appreciated!!!!!
Thanks in advance,
Lakshman.

You can put condition when you call java script function while clicking on "update" button.
On order.jsp update button call "submit_refresh()" java script function. You can check your condition over here.
You can find this function in "orderTools.js" file.
And when you enter item in last line on order page and click on the update button it will automatically add new empty lines on your order page as per your selected new line items from drop down box.
Or may be you can call your custome action class when you click on update to check particular condition.
I hope it will help you.
Thanks and Regards.
eCommerce Developer

New pricing condition update for sales order

Hi All,
We need to insert new pricing condition for existing sales order.Could you please sugest any bapi or function module to
update new pricing condition type.
Thanks
Mohit

One reason to use program is that then the business can be 100% that all the sales orders are "updated"
(maybe) & if anything goes wrong; The SAP consulting company - who created the program - is to be blamed / is accountable.
In short business wants to be 100% sure that update has taken place for ALL s orders.
Is that correct Mohit?
Edited by: Typewriter on Jun 24, 2011 9:27 AM

Header pricing condition types

Hi,
In a purchase order header pricing condition types are appearing twice .
Ex: JCDB    254
      JCDB     20
      JCV1    345
      JCV1     30.
first condition type (ex: JCDB 254) is calculated on net price
second cond type (ex: JCDB 20) is calculated on handling charge.
Only for this particular PO we face this problem.
How the pricing condition types are calculating twice?
regards,
sathya

If I am not mistaken, this is a Purchasing question.
Please post to correct forum.
Regards

I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it required a pc.As I didn't have access to a pc it wouldn't work is there any way to do this without a pc?

Hi, I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it, it required a pc. As I didn't have access to a pc it wouldn't work is there any way to do this without a pc? I was without this app for 3 weeks! Thanks, Lea

The process to update your Tom Tom is a big data file, you will need to be connected to a Wi-Fi network for it to download. If will take about an hour.

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

I get a notice that says a security and stability update is recommended for Fire Fox 3.6.15. When I click to update a bar appears showing attempt to contact but nothing ever updates.

I get a notice that says a security and stability update is recommended for Fire Fox 3.6.15. When I click to update a bar appears showing attempt to contact but nothing ever updates.

Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer

When I sync my iphone it says that there is newer version of the software but when I click the 'update'button I am told that 'itunes' is the latest version?

when I sync my iphone it says that there is newer version of the software but when I click the 'update' button I am told that 'itunes' is the latest version? There seem to be a few apps that are not compatible with my phone and I am wondering if that is because it is not up to date or beacuse it is a 3gs?

Snow Leopard requirements here:
http://support.apple.com/kb/SP575
I recommend no less than 2GB's of RAM. There is no download for SL, you must purchase from Apple, $29 at any Apple store. Leopard is no longer sold by Apple. About the only place you can find a retail disk is eBay, however the prices are getting ridiculous.

HT1386 when i click on check for update, the iTunes wants me to provide me a file or something from my computer, instead, it should check and suggest for an update

when i click on check for update, the iTunes wants me to provide me a file or something from my computer, instead, it should check and suggest for an update

Demo,
I'm not sure how I'm supposed to do that the instruction says since i am not familiar with Apple at all what are quick links even? Am i supposed to do this on Itunes on my Ipad or on the computer?
this was that reply you mentioned.
I spoke with Apple Tech Support and they guided me through this. I was trying to get the App Store working on a new iPad mini using a new, but existing Apple ID. To get it to work, I had to go onto iTunes on my main computer (not on the iPad). I had been trying to use the Sign In button, and I was having the issue of being "forced" to enter a credit card, which I did not want to do. Here was the solution I was given, which worked for me.
Log out of iTunes, if you are not already. (Or hit Cancel if you're on the Review Payment screen.)
Instead of going into Sign In, go to Redeem under the Quick Links, on the right-hand side, down a bit.
Go through the screens, accepting the EULA, etc. You will get to a Review Payment screen, similar to the one you saw before, but it will have a None button.
You can enter an iTunes card here if you want, but I was able to leave that field blank and still successfully get the account set up, ready to use on the iPad.

TS1702 my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as

my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as well. Please help I have set-up over 10 ipods and differents generations and have never had this issue like this, I even have all ratings ristriction unchecked and payment info in itunes so i need help please

but i could download on others ipods in same gen, facebook and ice cream tower, everything i look up and try install always says that for apps so your saying that i can not ever download any apps to this ipod ever againÉ

I have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?

i have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?

edit the hosts file on your computer and remove any lines that contain gs.apple.com. Disable your antivirus and firewall.

When we clicked on Update for new pricing,condition type is repeated twice

Similar Messages

Maybe you are looking for