Infotype Log Points are sure for any hints . :)

Hi
In my company some one delete the 90* infotype from PM01 now can i know who (which id)
is deleted and when .
Please it is bit urgent.
Prash.
<b>Points are sure for any hints .</b><b></b>

Hi,
You can use the Audit trace, like STAT, to trace who made the changes. This report may help you, RPUAUD00.
Good Luck.
Om.

Similar Messages

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Actions don't record data when something other than points are used for Stroke

This is more of a bug, so if there's any staff out there, just came across this one. I was just recording an action with a vector stroke width set to .25", and it seems it doesn't record the width, although it WILL hit the nail on the head, so the data is there somewhere. To the alrternative when I did this without entering a unit of measurement after it, it immediately filled it in with points. See image below.

Hi,
So you are getting expected output when you play the action back? The bug is that the unit value isn't showing in the action steps?
regards,
steve

Dates for payroll and time ( Ponts are sure for every answers )

Hi Peers,
I have a scenario where i have to capture the time related activates from 27 Feb to 27 March and the Payroll dates from 01.03.2007 to 31.03.2007 .
Now my problem is when the employee took leaves on 27 and 28 then according to the above config it should deduct the 2 days salary and paid accordingly.
Pls help how can i configure it .
It is very urgent pls help.
Nancy.

Hi Anu / Peers
Please read all the related queries.
If it is still unclear I will explain again.
I am configuring the Payroll for the dates 01.04.2007 to 31.04.2007
We are using the Negative Time Management.
Now the company wants is to configure the time realted activites from 26.03.2007 to 26.04.2007.
Now if the employee is absent from 27.03.2007 to 28.03.2007 so his time data should capture accordingly in the time proccessing of payroll .
Now what is a problem is it is assuming the values from 27.03.2007 to 28.03.2007 to as it was from last month and deducting in arrears.
Now if i know how and where to configure the time 27.03.2007 to 28.03.2007 then there will be no Problem.
So pls help me regarding this .
It is really urgent .
Hope all understand and pls give inputs.
Nancy.

[VIA] Which VIA 4-in-1's are best for a KT333

I just got a MSI 6380E (KT3 Ultra) with the VIA KT333 chipset. I was looking at VIA's site, and wasn't sure which would be the best drivers for my system. Since I don't have an SATA controller onboard, I don't want the HyperionPro package. So that leaves the retro and Hyperion. Which one would be best for my system?
Thanks,
James

from Viaarena.com:
VIA Hyperion 4in1 drivers are suitable for ANY VIA chipset - but they are particularly recommended for KT4## series, P4X4## series and newer, for example:
K7 chipsets: KT400, KT400A, KT600, KT880, KM400, KN400
K8 chipsets: K8T800, K8T800Pro, K8M800, K8T890, K8T890Pro
P4 chipsets: P4X400, P4X400A, PT800, PT880, PM800, PM880, PT880Pro, PT894
VIA Hyperion 4in1 drivers are compatible with any VIA chipset. Performance, however, is optimized for the more recent and the latest chipsets. Therefore some users of slightly older or legacy chipsets report that using the older 4.43 drivers they experience a more responsive system.
The driver package below is recommended for use with the following chipsets: MVP#, Apollo Pro## series, KT1##, KN1##, KM1##, KT2##, KN2##, KM2##, P4X2##, P4X3##, P4M2##
funny they don't mention the KT333, but i think 4.43 will be fine for you

Can we use the test data dictionery saved for a FM for any other FM

Hi experts,
i want to use the test data dictionary which i have maintained for a FM. now i want to use the same data for another FM.
Can i use that saved dictionary. if yes then how.
Points are sure.....
Thanks
Ashish

Amit,
Yes i can, but this fm is calling from some another applications (front end) and that is a big scenario. and that will be really vary time consuming so i want to do in this way.
If this is not possible then the last way i have to opt is to do excercise again .
Thanks

Role of SAP Functional & Basis Consultant for any new authoirzation/user ID in Support Phase

Dear Expert,
Please let us know what is standard /best practice for below activities in SAP Support phase?
Who will responsible for Authorization Matrix?
Who will be first point of contact (Functional / Basis Consultant) to SAP user for any new authorization request?
Who will do the testing & impact analysis of new authorization?
If we provide any new SAP transaction code to the end user & user is facing authorization object issue then who will be first point of contact for user Functional / Basis Consultant?
Also who will be fist point of contact (Functional / Basis Consultant) for new User ID creation request?
In our current practice Functional consultant is dealing with end user. He is taking requirement of new Report/Transaction access request & doing analysis. Then he is taking approval from BPO & based on BPO approval Functional consultant is providing training to end user. When end user is accepted requested report requirement in standard report or transaction data process then Functional consultant is sending request to Basis consultant along with authorization parameters like Role, Organization parameters, type of activity (create/change/display/delete) etc.
Our Basis consultant is not agreeing for this process & he want to directly deal with end user for all activities & he will take help of Functional consultant if required.
Sorry friends this is not technical discussion but it is create big dispute between our internal support team regarding who will be first point of contact for any authorization related issue?
Regards / Aviya.

Dear Aviya Paul,
1. Who will responsible for Authorization Matrix?
Authorization Matrix that define "what position may have access to which authorization/ role" shall be developed by User (Management), with support from BASIS. User is the one who have the authority to decide, while BASIS should help User in understanding the technical knowledge of access authorization.
2 to 5. BASIS.

Enable Notification for any users scheduling reports

Hi all!
How can I enable the "Notification" option for any user allowed to schedule a report within BOXI R 3.1 FP 1.7.
As administrator, the option is available within the scheduling.
As normal user I don't have any notification option visible. I can only send reports or messages as email.
Thanks for any hints,
ciao Hakan

Hi all!
How can I enable the "Notification" option for any user allowed to schedule a report within BOXI R 3.1 FP 1.7.
As administrator, the option is available within the scheduling.
As normal user I don't have any notification option visible. I can only send reports or messages as email.
Thanks for any hints,
ciao Hakan

We are looking for music hits according to various decades. iTunes used to have a hits of the 30s -90s etc. I can no longer find it. Any hints people?

We are looking for music hits according to various decades. iTunes used to have a hits of the 30s -90s etc. I can no longer find it. Any hints people?
Also, what are the legalities about sharing music? At what point does a song become part of the public domain?
Thank you! Gershawn

Alli hello,
Quit iTunes...
Download Cocktail and start the program... click on the 'interface' Icon and tick 'Show Invisible Items' then click the Restart button...
In a finder window click on the Icon that is your Boot Volume in the Side Bar ... select users ... select shared folder ... select the folder named 'SC info' and put it in the trash and empty it ... Do Not touch any other file.
Pathway looks like this HD > users > shared > SC info > SC Info.sidb
Go back to the Cocktail 'interface' window and untick Show Invisible Items and click restart .. quit Cocktail.
Start iTunes after deletinng this folder and it will prompt you to enter your authorization information again ... see now if your problem still exists...
Let's know how you get on Alli ... take care ... TP

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out.

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out of one devise before using another?

Some Internet providers that limit access to a single device at a time do so by the device's hardware MAC address. If your ISP is one of those, you may be able to substitute the MAC address of your AirPort Express base station for the computer. I would suggest that you contact them to find out if this is allowable.

When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its nam

When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Admin/Index2.aspx"
Any ideas???

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Log and Transfer: Red exclamation points are attacking our project!

We are shooting a documentary with a HVX and a Firestore in 720p/24p. Every shoot, we move the files from the Firestore to the hard drive. We then log and transfer off of the drive to a G-Raid scratch disk.
Up until the other day, we were having no problems "logging and transferring". For some reason, we are now able to play and label the clip, but when we go to "add clip to queue" a red exclamation point keeps coming up.
This is inclusive of old and new footage. I have tried to change the length of the file names as well as restart Final Cut as well as the drives.
I know you guys are much smarter than we are, so we are looking forward to your wisdom.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
Shane

All SCOM 2012 R2 dashboards are blank on Windows 7 for any user

All SCOM dashboards are showing up completely blank on several (but not all) Windows 7 machines and a 2008 R2 server (with RDS)...for any type of user. It's not a permissions issue as the same user can RDP to the SCOM Mgt server and view the dashboards just
fine. It seems to be some underying pre-requisite that isn't there, or isn't working. We've installed the pre-reqs (reportviewer, SQLSsyClrtypes, etc) to no avail. I've also tried doing a "repair" on .Net, and rebooted as described in another thread,
but that didn't work. I'm guessing it's something baked into our desktop images, but what am I missing

...also, we're seeing this event in the application log when the console is opened on an affected machine (but, not necessarily when opening the dashboard)...so, not sure it's 100% relevant.
Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. : System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for
more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.LoadModuleCatalogFromAssembly(IModuleCatalog bootstrapperCatalog, ModuleCatalog catalog, Assembly assembly)
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.CreateModuleCatalog(IEnumerable`1 assemblies)
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.LoadInternal(IEnumerable`1 assemblies)
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.Load(DeclaredAssembly assembly)
   at Microsoft.EnterpriseManagement.Monitoring.Components.ComponentRegistry.<>c__DisplayClass3e.<GetAssemblies>b__3c(DeclaredAssembly declaredAssembly)
   at System.Reactive.Linq.Observable.<>c__DisplayClass413`2.<>c__DisplayClass415.<Select>b__412(TSource x)

There are values for cost element 80000 that are not assigned to any line I

Hi,
While calulating WIP I am getting below error:
There are values for cost element 80000 that are not assigned to any line ID
Message no. KJ161
Diagnosis
Not all values for the cost element are assigned to a line ID.
Procedure
Assign the cost element to a line ID. If you don't want to include the cost element in results analysis, assign it to a line ID of category N.
You can access a detailed list of unassigned cost elements as follows: Start results analysis in the individual processing mode (transaction KKA1, KKA2, or KKA3). Select the field Full log. Execute the function. On the next screen, choose Logs -> Parameter List in the menu. A list is generated. The unassigned values are shown at the end of the list.
If cost element "+++++++++" was shown in the message, this is because in the assignment of costs and revenues to line IDs, you have not used a cost element other than the full masking "+++++++++". In this case a presummarization eliminates the information on the cost element.
Cost Element 80000 is of type 43 Internal activity allocation, I have Masked this in OKGB as below:
Controlling Area = FLGP
RA Version = 0
Masked Cost Element = 000008++++
Masked Cost Center = ++++++++++
Masked Activity Type = +++++
ReqToCap= COS (Secondary Cost)
I have Configure OKGA also but still system is giving error.
Please help me to understand.
Regards,
Vivek

I was wondering if you could help me I am trying to configure the RA key for Refurb orders and when I go into txn OKGB for the Assignment of C/E for WIP there is sample config already there which I copied. But I am having difficulty getting the KK1A to work I am getting the message as outlined above. Could you explain how this OKGB works and how to configure it a bit more fully. In my sample config there is a ReqTOCap section and in it there are letters like ABR, EK, FK, EL what do they mean. This is a screen shot of it. I am not sure how to go about this entirely so any light you could shed would be greatly appreciated. Can you suggest a good resource or documentation you may have, would be greatly appreciated.

We are not getting email for any of the two new profiles in Production environment

We are not getting email for any of the two new profiles.
The new rules for sending e-mail work when using the initial profile.
Only works for F9 and choose manually the profile is being sent.
But siebel writes the log of both the \ BIN \ sent as if it had sent.
operation:
Standards (Policies) were created in the Activities (S_EVT_ACT) and Contacts table (S_CONTACT). When Standards (Policies) are reached trigger actions (Actions). These actions are linked to sending emails.

The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent.
-Are you using Static- or Dynamic Port?
Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
instances in the Group Hub.
If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
Morten la Cour

Infotype Log Points are sure for any hints . :)

Similar Messages

Maybe you are looking for