When will you fix battery issues on ios 5.1.1? I have the same settings but 85% less battery life!!!

I have read many tips about what to do for increasing battery life. However
I hav the same setting with ios 5.1.1 that I was using with the previous
version (ios 5.1) but with 85% less battery life time. It is so frustrating because this
issue come back every 2 update : one killing your battery and the second
to fix this, and it starts again... I am really sick of this.
I am using an iPhone 4.

Hi All – I have also experienced the battery drain issue on upgrade to 5.1.1.
Like many on the forum I have tried ALL suggestions to resolve this issue, none of them have resolved the problem that Apple owners seem to be experiencing, it’s not in our minds as some suggest. My iPhone 4 and iPhone 3GS are working a treat under 5.1.1, in fact I believe the 3GS is running better than under 4.3.x.
However I do think I have tracked the problem down, which I will document here, but first a list of the things I’ve tried:
- Fully discharge battery to <5% and then back to 100% and leave charging for 3 hours after
- Turn off all notifications
- Turn off all location services
- Turn down brightness
- Turn off ALL iCloud services (effectively delete the account)
- Reconfigure email account to ‘MANUAL Fetch’ only
- Factory restore to fresh 5.1.1 from within iTunes and then restore from back-up
The only thing that stops the battery discharging at around 5% every 8 hours is turning off Wi-Fi during standby mode. Prior to 5.1.1 the iPad would drain maybe 1% every 24 hours in standby mode with Wi-Fi on.
Puzzled by this I did some research to understand what the iPad is doing whilst in standby mode with Wi-Fi on, so below is a trace from the iPad system log so that hopefully someone can look at this , identify the issue and hopefully fix it in a future ios 5.1.x release:
3 Jun 2012 12:02:43 - CommCenter [56] (Notice): Telling CSI to go low power.
3 Jun 2012 12:02:43 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x18000, stateNum 0, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): fStateFlags(34a22)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLAN Sleeping on BSS:  @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -57, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures =  0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(0000002f)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:43 - kernel [0] (Debug): (null)
3 Jun 2012 12:02:09 - CommCenter [56] (Notice): Telling CSI to exit low power.
3 Jun 2012 12:02:09 - kernel [0] (Debug): pmu wake events: wlan
3 Jun 2012 12:02:09 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8002, stateNum 1, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerOnSystem() : Powering On
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): stateFlags(24a23)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOn()
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): Tearing down WoW mode
3 Jun 2012 12:02:09 - kernel [0] (Debug): [9395.720807416]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
3 Jun 2012 12:02:09 - kernel [0] (Debug): Wakeup Packet: 40500428A49D4C18EB55B6DA08004500004e000040004011b948c0a80001c0a80005d3880089003 a67ef03e90000000100000000000020434b414141414141414141414141414141414141414141414 1414141414141410000210001 (92 bytes)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLAN Woke on same BSS:  @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -60, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures =  0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
3 Jun 2012 12:02:09 - kernel [0] (Debug): en0: BSSID changed to 4c:17:eb:55:b6:eb
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableDetect 0
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableType Detached
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBaseband::resetDetectInterrupt with 0
3 Jun 2012 12:01:58 - CommCenter [56] (Notice): Telling CSI to go low power.
3 Jun 2012 12:01:58 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x18000, stateNum 0, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): fStateFlags(34a22)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLAN Sleeping on BSS:  @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -59, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures =  0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(0000002f)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:58 - kernel [0] (Debug): (null)
3 Jun 2012 12:01:24 - CommCenter [56] (Notice): Telling CSI to exit low power.
3 Jun 2012 12:01:24 - kernel [0] (Debug): pmu wake events: wlan
3 Jun 2012 12:01:24 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8002, stateNum 1, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerOnSystem() : Powering On
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): stateFlags(24a23)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOn()
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): Tearing down WoW mode
3 Jun 2012 12:01:24 - kernel [0] (Debug): [9360.861496125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
3 Jun 2012 12:01:24 - kernel [0] (Debug): Wakeup Packet: 40500428A49D4C18EB55B6DA08004500004e000040004011b948c0a80001c0a80005a9a50089003 a91d203e90000000100000000000020434b414141414141414141414141414141414141414141414 1414141414141410000210001 (92 bytes)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLAN Woke on same BSS:  @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -61, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures =  0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
3 Jun 2012 12:01:24 - kernel [0] (Debug): en0: BSSID changed to 4c:17:eb:55:b6:eb
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableDetect 0
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableType Detached
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBaseband::resetDetectInterrupt with 0
These repeating messages appear approx every 30 seconds the wakeup packet contains the MAC addresses for my router and iPad, so one of them is misbehaving. This may be to do with how these have been implemented:
http://en.wikipedia.org/wiki/Wake-on-LAN
http://en.wikipedia.org/wiki/Sleep_Proxy_Service
Either way I believe this is the source of the power drain issue whilst in standby with Wi-Fi turned on, perhaps this could be a router issue and that is why the issue not hitting everyone post 5.1.1?
All the best.

Similar Messages

  • Why there is not an option to unable to 3G and use 2G on iPhone 4S ? It's awful! When will you fix that ?

    Why there is not an option to unable the 3G and use 2G on iPhone 4S ? It's awful! When will you fix that ? What are we gonna do now? I cant believe Apple can do it, like the battery of iPhone 4S is amazing. Everyday I should charge my phone! It doesnt make sense...

    YOu can't disable the camera - this feature came out with IOS 5.
    You will have to set your passcode lock to immediately.  settings - general - passcode lock.

  • FOURTH TIME: After your latest upgrade, all pages SLANT with Mac OS 6.0 -- WHEN WILL YOU FIX IT? Or even reply?

    Upgraded to Mac OS 10.6 because you told me FireFox would no longer support 10.5, tho I had never had a problem.
    OK until you upgraded to FireFox 18 -- then all pages SLANT. Impossible to use, and have had to switch to Safari.
    Your forum shows MANY with the same issue, yet no response from Mozilla. Seems like it ain't our problem but yours -- so when will you fix it????

    If you are updating, might as well go all the way to .8, as it includes important security and stability updates for your mac.

  • U44M1P7 ERROR. UPDATES IMPOSSIBLE. WHEN WILL YOU FIX THIS????????

    WHEN WILL YOU FIX THIS? YOUR INDIFFERENCE IS SPECTACULAR!

    Hi,
    Please try the steps mentioned in the link below
    http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    and
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html
    Thanks
    Kapil

  • When I try to update my iTunes, it tells me that I have the latest version, but I only have 10.6.3 - how can I override this?

    When I try to update my iTunes, it tells me that I have the latest version, but I only have 10.6.3 - how can I override this?

    I'm sorry but your post seems vague as to exactly what version of what you are running, therefore, it comes as a surprise that you mention that "it" won't let you update iTunes. Did you run Software Update or try updating from within iTunes?
    If you are running a Mac under Mac OS X 10.6.3, then if you should be able to update that by using System Update to version 10.6.8 - first and foremost.
    Then, assuming you can run Mac OS X 10.6.8; I would think that you can (secondarily) update iTunes to Version 10.7 or Ver. 11.0.5.; IMHO 10.7 is better as it has Coverflow. Nonetheless...
    Regards

  • HT1476 Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. Some friends have the same problem May I know the reason?

    Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. I have already updateed to 7.0.2 the latest version. Some friends have the same problem May I know the reason?

    You need to update iTunes to 11.1 on your PC

  • WTF Blackberry, WHEN WILL YOU FIX THE DOUBLE TYPING ISSUE

    This is **bleep**ing driving me crazy I purchased the blackberry for its keyboard, and it sucks and fauly  You are becoming a **bleep**ty company, and you wonder why you are going bankrupt?  More than 1 year and still no fix Multiple replacement and still the same issue Are you **bleep**ing kiding me, why you stay silent?  I'm going to send a letter to every popular website to let them know about this issue Maybe then you'll react, you don't deserve our money or support

    These are user to user forums.  you are not addressing Apple by posting here.  The fix will be made available when it's ready.  No sooner.

  • AirPort Issues When will you fix them apple!!!!!

    I have the iMac i think G5 the White one right before the silver new ones.
    I am running Leopard, with all of the latests updates
    3Gb of Ram
    And my AirPort cuts in and out of services, and does not properly display my signal strength sometimes. I am about 20-30 feet away from the wireless router sperated by mainly wood not a lot of cement. But I know it is not the router because my PC connects fine.
    I have ran all things in Onyx to clean up my mac to speed things up and that did not help.
    What do you guys Suggest?

    James,
    Three years ago there were a number of us having Airport problems. e.g.
    http://discussions.apple.com/message.jspa?messageID=2388857#2388857
    There about eight tenths of a gazillion things written on the subject, back and forth between a number of people. We had hoped for responses from Apple, or at least announcements, however a report would have been great - however, if they said anything that sounded remotely like it was some bug in what they did, then who knows how many starvin' lawyers would have jumped on it to get a free lunch out of Apple - so they're better off quietly identifying & fixing these bugs, and putting the corrections in subsequent updates - hopefully it is not an hardware design issue, that would be a Timothy Leary style bummer.
    Gino

  • APPLE...WHEN WILL YOU ADDRESS THIS ISSUE?!?!

    If you think my topic seems a bit angry well...you're absolutely right!
    When I connect my iPhone 3G it doesn't show up in iTunes but instead iTunes goes 'Not responding' for a couple of minutes before it resumes but still with no iPhone in the list. As far as I can tell this is a pure 64-bit problem, I had the problem when running Vista 64-bit and I have the problem now when running Windows 7 64-bit.
    I realize MS and Windows and especially 64-bit versions of it might not be at the top of the list in this camp but like it or not...there are some people out there using 64-bit versions of Windows and the number will increase every day so to me it should be in Apple's interest to solve this problem - very sad all this considering how much I like the iPhone in every other aspect.
    So please Apple...invest some of your resources and time fixing this now. I've tried contacting the place where I bought the iPhone (Telenor in Sweden) and I've tried to contact Apple myself but to no avail...

    I don't have an iPhone and try to avoid using Apple-anything, including iTunes which even 9.02 is suppose to be Windows 7 64-bit.
    Any possibility your motherboard, BIOS, USB ports or anything? or conflict is elsewhere?
    I know I've seen some long threads about iPhone and 64-bit Windows 7, which would be better title, or post in iPhone forum...
    However, you realize that there is no support for RC? and yet that seems left out but is what you are using. Try the Windows 7 64-bit retail would be anyone's first recommendation.

  • Now that I was sent by Microsoft to your download update site to get the latest version 4.0.1, Firefox crashes (becomes non-responsive) before opening any site page I try. When will you fix this problem?

    For two weeks I have tried to use your automatic download of the latest version 4.0.1. It would sit there telling me it is trying to connect to the download computer for hours, several times overnight. Then, it became non-responsive and error messages were sent to Microsoft who directed me to your download site. After downloading your latest version several times, the new page would open. After selecting a bookmarked site, it would open (sometimes only partially) but when I tried to scroll down, it would freeze up and become non-responsive, again prompting error messages to Microsoft. They must be getting a kick out of this. I'm running a Gateway 7200S desktop with Microsoft XP and Intel single range Pentium 4 processor. I have been using your Mozilla Firefox as my default browser for several years with much satisfaction. Unfortunately, whatever upgrades were made have rendered it useless for me.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • When will you fix adobe flash?

    Flash keeps crashing my browser and causing huge lag times. I must use Blackboard collaborate and I noticed that my instructors computer was exhibiting the same symptoms. Get your act together. start addressing your crash reports. Don't release crap and then fix it at my expense. Be professional.

    A lot of the time you are getting the settings because that is the way the author set it up. In general, you get what the author sets or the defaults in the program. You have some choice of selections in the preferences and that is it. You sure are complaining a lot for having spent no money on a product. Actually there is Adobe Reader and Adobe Acrobat. There has not been an Adobe Acrobat Reader for almost 10 years.
    In contrast, there are all sorts of problems with WORD also. Forms in WORD often have problems related to changing page size and such unless you are using the defaults in WORD 2007 (basically turning off printer metrics) and as far as I know you can not submit a WORD form. So there are pros and cons to all software. In terms of the handtool, it is usually on by default. That is why one individual ask what you right clicked on the document for and then selected the handtool. We all have issues with part of Acrobat (what this forum is about), but it meets a lot of needs better than other products.
    If you want to request changes, then you need to be sure you are using the product correctly and then address the problems to Adobe, not to users of a different product. We (or better the Reader forum) would be glad to try to help you use the product correctly or solve problems. That is why these forums exist.
    Have a good week.

  • Trying to search on Google, or to access a search result, often crashes my Firefox. This has gone on for months. When will you fix it?

    The report tab says my OS is Windows NT, but it's actually XP Home. (Yes, that's how old my computer is -- and that's why I'm looking for a solution other than just trying to see how updated a version of Firefox the computer can handle.)
    The problem doesn't happen every time I try to search Google (or every time I succeed in getting to a page of search results and try accessing one of them). But it happens quite a lot, and often multiple times in succession. And when I try to use Crash Reporter to tell you, I get one of two responses:
    (1) the standard autobot-reply suggesting an upgrade and this path; or, more often,
    (2) nothing.
    I don't want to abandon you -- and it would be hard to replace the computer at the moment. So what (to coin a phrase) can Mozilla do for me?
    [UPDATE: The troubleshooter program won't install -- says it's not compatible with my old version of Firefox (3.6.20, says the About option in the Help menu). And the "show details" link at the bottom of this page won't reveal your "educated guesses about [my] current browser and operating system", so I can't do more to correct them -- sorry.]

    Hmm . . . I think maybe the CPU is okay, but I would appreciate any time and effort you folks could spare to confirm my work.
    Wikipedia lists a "3300+" model twice in its article on Sempron processors. One is a "Socket A (Socket 462)" model named Barton and with a listed 130ns speed. The other is a "Socket 754" model named Palermo with a listed 90ns speed. The latter sounded familiar, but my left hand has worn off anything readable from the sticker next to the "mouse area" so I couldn't confirm it that way.
    Checking the properties of the CPU (through my hardware configuration) revealed an interesting ID string which suggested my CPU was "family 15 model 44". And re-searching for that (via Yahoo, since I couldn't risk another Google crash) brought me to a late-2009 AMD Processors forum entry where some other expert answered a question by identifying that family and model as "AMD Sempron64 socket 754, e.g Sempron 2600+, Sempron 2800+, including all latest core stepping versions of desktop model Semprons, socket 754."
    If that's correct, and I've followed along the road properly, then my CPU is also in that family, and in that socket -- which would mean it '''was''' one of the processors built to work with SSE2. And that, in turn, would mean it should be able to run the v21 of Firefox you mention -- right?
    I don't know how much slower or faster v21 may be -- and I won't want to dump even the Mozilla-abandoned v3.6.20 until I see what if any side-effects there may be. But maybe there's an end in sight.
    (If you have any hints for me on this score, I would appreciate them. Likewise if you have any idea why it took months of Reporting Crashes before I got any response at all, even from the autobot. But most of all, I would greatly appreciate your help in getting over what may be the final obstacle to finding out if it's possible for me and my old PC to run v21 . . . and in finding out what choices I have if that '''''doesn't''''' work.)

  • Flash video has not worked with Firefox browser for years. When will you fix this?

    Anyone who uses Firefox browser (for Windows or for Mac) knows that flash video playback ceased working sometime around Firefox ver 13 and has not worked since.
    The Mozilla people say it is Adobe's fault - instead of fixing Firefox.
    They say roll back to Adobe Flash version 10.
    This solves the video problem, but then, any other services that depend on the latest Flash build, quit working properly.
    This situation leaves millions of Firefox users in perpetual frustration. We can't use our browser of choice to view any web video built with Flash.
    This is so unacceptable. I am unable to understand why Adobe and Firefox don't get together and iron out whatever code incompatibility is causing this.
    I would really like to hear Adobe's explanation for this.

    proteus-editorial wrote:
    Anyone who uses Firefox browser (for Windows or for Mac) knows that flash video playback ceased working sometime around Firefox ver 13 and has not worked since.
    The Mozilla people say it is Adobe's fault - instead of fixing Firefox.
    They say roll back to Adobe Flash version 10.
    This solves the video problem, but then, any other services that depend on the latest Flash build, quit working properly.
    This situation leaves millions of Firefox users in perpetual frustration. We can't use our browser of choice to view any web video built with Flash.
    This is so unacceptable. I am unable to understand why Adobe and Firefox don't get together and iron out whatever code incompatibility is causing this.
    I would really like to hear Adobe's explanation for this.
    Uh... I don't know what planet you posted this from, but Flash video has worked flawlessly with Firefox for hundreds of millions of users here on earth, without any gaps since Firefox was still called Mozilla.
    For the record, I have Firefox 28 with Flash Player 13 installed on:
    WIndows XP (SP3-64bit)
    Windows Vista Ultimate (SP2-64bit)
    Windows 7 Ultimate (SP1-64bit)
    Windows 8 Enterprise (64bit-2 machines) 
    Windows 8.1 Enterprise (64 bit)
    OS 0.6.8 Server
    OS10.7.5
    OS10.8.5 
    OS10.9.2
    And I've had Firefox with Flash Player since 2003 on both OS formats. I've never had a compatibility problem.
    I also use Chrome, IE, Opera, Safari and a few other browsers you probably never heard of (like SeaMonkey, Maxthon, Waterfox, iCab, OmniWeb)... Flash works in all of them.
    I'd have to say the problem is with your system specifically, because if it was a Firefox/Flash compatibility problem, there would have been hundreds of millions of complaints about it, for over a decade. That... just isn't the case.

  • When will Apple fix CS5 issues?

    So... my newly acquired CS5 set-up (Macbook Pro mid-2009, 8GB RAM) has been crashing like a hijacked plane ever since Apple gave us the wonderful 10.6.4 update.  Adobe even have a support document to this effect: http://kb2.adobe.com/cps/854/cpsid_85423.html
    Which is basically a giant shrug of the shoulders.
    Now, is it just me or is this one giant joke that such an expensive combination of software and hardware would be completely unusable?

    posting your video card info would be helpful -- there are some known issues with certain cards that are causing these problems
    i recall it is the nvidia cards that have the problem i am referring to
    apple is aware of the problem

  • TS1702 My sons ipod touch will not accept his apple id for facetime of messages. everytime we enter apple id it flips back to login or sign up page for both apps. Very frustating and I see others have the same problem but have no goosd answers how to reso

    Please help with advice on setting up facetime and messages on ipod touch. \When I enter the sign in apple id for both apps it just flicks back to the sign in or sign up page after verifying it.
    We have very strong internet, I have already rebooted and shut down and set up a new email account and changed apple id from y7mail to gmail and still it is not working.... super frustrating!! Hope you can help.

    Try This...
    Close All Open Apps... Sigh Out of the Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    More Info Here  >  Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367

Maybe you are looking for

  • Beginner installing SQL Server 2014 for Excel Data Mining

    Hello, I'm a complete beginner with servers but Im desperately trying to gain access to the SQL server for use with the data mining addin for excel. Could someone please help. When I try to make a connection in Excel by choosing DATA MINING> <No Conn

  • JDBC in applet URGENT

    Hi, I have created an application by using JDBC,now i would like to convert this application into applet and put it online. So i register a domain name, create a jar file for this application and use browser to load it. But so far from what i know, o

  • Is Socket threads safe?

    I use InputStream in a Thread and OutputStream in another Thread,the InputStream and the OutputStream is get from same Socket Object.Has any problem? thanks.

  • Invoice Verification issue

    Hello all, I got some requirement from my client as below: 1) As of now, the invoicing party is modifiable field during invoice verification i.e. MIRO. How to make the invoicing field non-modifiable during MIRO. 2) Unplanned delivery cost field is ac

  • Dot Matrix Print to Laser Print

    Hi ZQM_INSP_RESULT  this Program Gives Out Put in Dot MAtrix Print Format. but I want it the Report in Laser Print Out.... How to Do This? I gone through the program bt im not Understanding aything... Can Anybody help me on this?