Whenever I use the video facility on Skype, my macbook pro crashes. I've reloaded the Skype application, but it still does it.

Whenever I use the video facility on Skype, my macbook pro crashes. How can it be resolved.

You would do better by posting in Skype's forums 

Similar Messages

  • HT4889 If I use this migration  by ethernet from a macbook pro to an imac will the original macbook pro still have the original data

    If I use this migration  by ethernet from a macbook pro to an imac will the original macbook pro still have the original data

    Yes.

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

    My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

    Hello Jane Benstock,
    Thank you for using Apple Support Communities
    It sounds like the next best step to take would be to reset the iPod Shuffle.
    Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
    All the best,
    Sterling

  • Macbook pro crashes and goes to the background image with no access to dock etc..

    Macbook Pro Early 2011 version, running Lion OSX, crashes randomly and goes to the background image. the dock is not accesible nor are any other options, I have to hold down power to restart. I have found that a lot of my applications have started to crash especially iphoto, itunes and safari. Ive repaired permissions deleted anti virus software which i thought was slowing the computer down. Any help would be appreciated..

    I suggest you post this issue on the iTunes forum.  You will have an audience that is oriented specifically towards this application.
    Ciao.

  • My i pad has sound but when it comes to all the applications they dont have volume. I go to the settings of the applications but it still does not work.

    i pad with no sound on applications

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • HT201240 I forgot the Parental Controls password on my Macbook Pro, which apparently is not the same as my log in. How do I reset it?

    I just set it up to let the kids i babysit play games online and i have no i dea what i set the password to. I really do not want to have to factory reset everything. What can i do?

    Hi kingwm,
    Welcome to the Support Communities!
    What email account are you using?  In Mavericks, if you look in your Applications folder, in a subfolder called Utilities, you will find the Keychain Access application.
    The main keychain is called the "login keychain" and it is the one created for your main User account.  Select the passwords category on the left, and look for your mail application.  Double-click on the mail application and click in the "Show password" box.  You'll have to enter your User admin password (the one you use when you turn the computer on) to see the password.
    If this doesn't resolve your issue, you may need to go to your email service provider's website, reset your email password and then update the settings in both computers and any iOS devices you have.
    Mac OS X 10.6: About keychains
    http://support.apple.com/kb/PH7290
    OS X Mavericks: About your keychain password
    http://support.apple.com/kb/PH13762
    Cheers,
    - Judy

  • I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro

    Help...
    I can not open the mac app store in any way from my mac book pro
    please help

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • What is the best voice control program for macbook pro

    what is the best voice control program for macbook pro?
    i have lost the use of my arms and need full voice control.
    thank you.

    Welcome to the Apple Support Communities
    First, use speech recognition. It's installed on OS X, so you don't have to install a third-party app. See > http://support.apple.com/kb/PH11258?viewlocale=en_US

  • Can i use a 60 watt charger on my macbook pro, 15 inch?

    Is it safe to use a 60 watt charger on my macbook pro? Will it break the charger? Please reply..

    For more on this:
    http://support.apple.com/kb/HT2346

  • The battery icon on my (old) MacBook Pro turned red. Then black. What does this mean?

    The battery icon on my (old) MacBook Pro turned red for a few moments, then black. What does this mean?

    penny41,
    Thanks, glad it helped you to check your battery status.
    Something else to look at would be the cycle count, as you mention that your computer is "ancient". If you have a high number of cycles, it may also be a sign that the battery is tired and possibly nearing it's life span, and may possibly need to be replaced soon. If you see that again you may try a SMC reset to see if that helps, but if it continues you may need a new battery at some point. The battery icon will usually say needs service, or something to that effect.  For the later MBP's Apple claims a life span of up to 1000 cycles, of this also will be dependent on who the battery is used, on the older ones I'm not quite sure what the claims were, and I don't know how old "ancient" in your case actually means.
    I provide this for your info, so that you understand what may possibly be occurring.
    I wish you the best.
    SMC reset:
    Follow directions for what applies to your machine, a battery you can remove, or a battery you should not remove yourself.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • How do I find and open the CD folder on a 13" macbook pro??

    How do I find and open the Cd folder on a 13" macbook pro , so I can read the content on the cd with pages.

    If the CD is not showing on the desktop, go to Finder on the menu bar, Preferences, General and check the box for CDs, DVDs,and iPods.  Then double click the image of the CD on the desktop to open and display the contents of the CD.

  • I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

    How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

    Bob Perez
    Please review and consider the following which works for me in Premiere Elements 12 Window 64 bit.
    From what you wrote, I suspect that you have DVD-VIDEO widescreen on DVD disc. For now I will assume that you are working in a NTSC setup.
    Premiere Elements DVD-VIDEO on DVD disc is characterized as interlaced video with field order lower (bottom) field first. I am not sure how your DVD-VIDEO on DVD was produced - upper (top) field first or lower (bottom) field first. We may have to apply Field Option Reverse Field Dominance at the Timeline level, but for now let us put that aside for a later time.
    Insert your DVD disc in the DVD burner tray.
    Open Premiere Elements to the Expert workspace and set the project preset manually for NTSC DV Widescreen. How to details for manual project preset setting are found
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    Then, Add Media/DVD camera or Computer Drive/Video Importer.
    The video files from the DVD-VIDEO will be the larger size files and will probably start with VTS_01_1.VOB.
    In the Video Importer designate the save location for video file VOB(s) and select Add to Timeline and hit Get Media
    to put the files on the Timeline for editing.
    If you have more than one DVD disc to "rip", please set up the Video Importer Save In location so that the save in location has a folder for each disc. The fact that all DVDs have the same VTS_01_1.VOB name etc will cause problems if you saved all to the same place as individual files.
    Determine how that works for you in your Mac computer environment. We will be watching for your progress.
    Others may tell you that you need to convert the VOB to another format before import into Premiere Elements. That is no necessary for Premiere Elements.
    Thank you.
    ATR

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

Maybe you are looking for

  • How do I stop icloud contacts from overwriting or superseding iphone contact entrees

    If i enter a new contact on my Iphone it eventualy gets wiped out (Deleted).  i assume this is because it does not exist on the cloud.  If i enter a new contact in the cloud, it emediatly apears on my Iphone.  Nice!  i like that, but i want to be abl

  • Program to list JDBC drivers

    Hi everyone, I use the following code to list JDBC drivers on my system. private static void listDrivers() { //Get all the JDBC drivers Enumeration<Driver> driverList = DriverManager.getDrivers(); //print out all the drivers using a loop while (drive

  • Shipment cost condition types - Insurance and loading/picking

    Hello Experts! I am trying to create a pricing procedure for shipment containing : -One pricing condition for insurance (the insurance is a % of the total value of the transported goods (value of the delivery)). -One pricing condition for loading. Wh

  • I can't open iTunes anymore. Macbook Pro OSX Yosemite

    So after installing an update for iTunes, it no longer will open. Now I tried to look in my updates and now its not showing up, so the update that I installed isn't showing and now iTunes isn't working. I have OS X Yosemite 10.10.3. No matter how man

  • Lightroom 6 standalone upgrade does not install in mac (does not validate the serial)

    I have bought and download Lightroom 6 standalone upgrade (I own lightroom 1, 2 and 3) and during the installation in my macbook pro I obtain the following message: "We are unable to validate this serial number for Adobe Lightroom. Please contact....