Whenever messages created in XI, initially it will go to error status

Whenever messages created in XI, initially it will go to error status
As soon as IDOCs released in ECC system the messages are going to error status. But they are processing successfully later. They are going to error state as soon a they release. Thats the problem.
Information message "XML message not found". But I am able to see XML message in payload. When I try to reprocess the message it will succeed. It is happening for all the interfaces.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MESSAGE_NOT_FOUND</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XML message not found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please provide any help.

Hi !
It seems that the message type / interface message defined in interface determination does not match with one in the message. Are you using the imported IDOC as interface message or did you create a new interface mapping? you should use the imported IDOC in interface mapping and also in interface determination objects. Also try to reactivate the interface determination object.
Regards,
Matias.

Similar Messages

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
If you go down the stuff.vi route Keep us curious guys posted
Jeff

TS3276 I have 3 different email accounts. Whenever I create a message I want one of those accounts to be my default. How do I do that?

I have 3 different email accounts. Whenever I create a message I want one of those accounts to be my default. How do I do that?

Go to Mail's Composing preference pane and set the Send new messages from: to the account of your choice.
OT

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

If I create a new apple ID will I lose all the apps I have purchased with my original ID?

If I create a new apple ID will I lose all the apps I have purchased with my original ID?

I set up FaceTime and Messages on four different devices with only one Apple ID. I used the exact method that is described in the video that AnaMusic has provided to you in the link in her response above. That method worked fine for my family, but you can create new Apple ID's just to use for FaceTime and Messages if you like. Many users prefer doing that as opposed to adding new email addresses.
IMO - using unique email addresses (like in the video) makes sense, because we (my family) all have different email addresses anyway, and it was very simple to add each family members email address to both apps and remove my Apple ID email address as the contact address on each device.
BTW .... if you are using your Apple ID on both devices - your phone number should be the number that is showing in the settings - not you daughter's. Did you set up the Apps with your Apple ID?

How user trace the message created in Satellite System

HI All,
I'm using Servide Desk in my company. Just wondering how user can trace the progress of the message created where email notification is not configured.
Remember when user send/save the message, there's a message number created. Just wonder any center/ transaction code user can trace the progress and have a visible view on the message ON THE SATELLITE System, not in SOLMAN.
Thanks,
NIcholas Chang

>
Nicholas Chang wrote:
> Hi All,
>
> What standard F4 help screen should i modify and from where should i start? Could you please enlighten me on what function or program that this F4 help screen bind to? I need to know the function/program in order for my abaper to work on this.
>
> Also, i just wondering is every user able to create message in Satellite System under Help -> Create Message? According to the SOLMAN Security Guide, it mention user with role SAP_SUPPDESK_CREATE are able to create message but i've and created and tested with a restricted profile user without SAP_SUPPDESK_CREATE role, and it still manage to create message.
>
> I've completed the SOLMAN SD setup and currently tryin to fine tune it.
>
> Your help is very much appreciated.
>
> Thanks!
> Nicholas
Hi Nicholas
If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
Regards
Amit

HT1178 I bought Time Capsule specifically to back up my computer at work. Only my computer. I completed the steps the best of my knowledge but I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to

I bought Time Capsule specifically to back up my computer at work. Only my computer. There are many computers within my department. I completed the steps the best of my knowledge but was unsure of which option to click. I clicked "I want to create a new wireless network". At the onset the instructions said I needed to connect with an ethernet cable, which I did. But I have no desire to connect to the internet, print from it, or have others access. I did deselect guest options, and I did put in passwords. But at the end of the process I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to continue."
I was worried this would shut me down and I wouldn't be able to continue to work. I don't necessarily need to connect wirelessly. It is connected via ethernet cable from machine to device.
Can you advise me how to continue? Did I choose the wrong options?

I bought an external hard drive called "Seagate Backup Plus" From the Apple store to back up everything on my computer and anything new on my computer. It came with Time Machine. The external hard drive disk had 1 or 2 Terabytes. Time Machine says "next backup: When disk is connected." "Oldest backup: July 2, 2014." & Also "Latest back July, 2."

Whenever I turn on my Apple TV, it get an error message that says Go to itunes store on your computer and get your password.

Whenever I turn on my Apple TV, it get an error message that says "Have you forgot your password. You have attempted to log in too many times. Go to itunes store on your computer and get your password". I have logged into itunes store on my computer, but I don't know what to do next. I accessed my account on itunes store hoping that would give me a pasword or other useful information, but no help. What am I supposed to do?

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

TS1717 iTunes 11 and Windows 7 (32 bit). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed").

iTunes 11.0.1.12 and Windows 7 (32 bit, latest version). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed"). I may be trying to search for an App. or book (or anything else), trying to access iTunes store, checking for updates to Apps., inputting my password, etc. etc. I have uninstalled iTunes several times, reinstalled several times, but the error persists. I tried the iTunes 10 suggested fix of running in safe mode, but iTunes again crashed when I was trying to create a new ID.
Any real help would be gratefully received. Thank you.

Still having this issue

In which table the initial balances will be stored when loading via api

Hi all,
I am doing initial balances migration...
In which table the initial balances will be stored when loading though an api.. (pay_balance_upload.process).
First I have loaded data in to pay_balance_batch_headers and pay_balance_batch_lines tables..
Then called the api pay_balance_upload.process. and the data was reflecting correctly in front end.
But we need to reconcile the loaded data.. for that, can anyone please tell me in which the loaded balances would be stored..
I have identified two tables, pay_assignment_latest_balances
and pay_latest_balances
when I try to create a balance from frontend I can see the data in pay_latest_balances table..
But when I load via api I am not able to find it in any of these tables..
In addition to that can anyone please tell me when the data will be populated in pay_assignment_latest_balances and pay_latest_balances tables.
Awaiting for your help and quick response..
Thanks and Regards
Kishore

You have followed the correct process..As Vignesh said, you can use pay_balance_pkg.get_value to make sure you have the correct values uploaded but otherwise if you are able to see the values in the front end I wouldn't worry about the latest balances tables. These tables, as the name indicate, hold only the latest values and if a payroll (ran post the initial balance upload) has been rolled back, these are deleted since they are no longer available.
You can refer the below Metalink notes for a detailed explanation:
The Secret Life of Initial Balance Upload with Screenshots Example [ID 60057.1]

Intercompany with billing output message creates goods entries lock Purch O

Hi Experts,
we have a problem in an Intercompany flow.
From each SD Invoice, an output message is triggered. This output message creates a goods entry of the related purchase order related using a batch input.
There are many SD invoices related with the same purchase order.
The problem happens when many output messages were processed in a massive way though a job of report RSBDCSUB.
More that one SD invoice will create goods entries related with the same purchase order and sometimes at the same time.
The result was that some goods entries aren't created because the purchase order is locked by one of the previous process of the same purchase order.
We have as a workaround to re-process the batch inputs wrong, but we want to avoid this re-processing.
is there any solution for this process? do we change the process and use IDOCs or BAPIs?
thanks in advance,
aupalaura

Dear Raja
I need 2 to get a consolidated PDF from both OTF and SPOOL
What do i do ? how 2 proceed . Plz tell me any other solution plz .
User wants only one PDF .
Plz help for god sake .
How about saving the PDF from OTF and then appending the PDF from Spool at the prompt at end of that (Any append possible at the Prompt )
Thnx
Moni
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman

No messages created from split mapping - Multimapping

Hi,
Getting the error in MONI saying that : No messages created from split mapping
Sender is :
   <Purchase>
            <Number>007</Number>
            <Desc>RAJ</Desc>
            <Quantity>half</Quantity>
   </Purchase>
Target should be 3 files such as:
<Purchase>
            <Number>007</Number>
            <Desc>RAJ</Desc>
   </Purchase>
<Purchase>
            <Number>007</Number>
            <Quantity>half</Quantity>
/Purchase>
<Purchase>
             <Desc>RAJ</Desc>
            <Quantity>half</Quantity>
</Purchase>
Regards,
Y.Raj.

Hi,
In your mapping select the cardinality of source message as 0..1 while that of target message should be 0..unbounded.
Also since you are not using all the elements of source into all the target messages (seems using only two source elements in each target msg) do the mapping accordingly...i doubt whether you can achieve your requirement in one mapping itself....may be you will have to follow what Tarang mentioned:
3. have 3 mappings between source structure and MT1(map only num,dec), source struc and MT2(map num,Qty) ....
Exception to above statement:)
If you set the target cardinality as 0..unbounded then duplicate the root target node thrice (as per your requirement)....and then map each target section seperately....
Regards,
Abhishek.
Edited by: abhishek salvi on Apr 7, 2009 9:12 AM

Error: The Message Broker is not initialized

In first step, I had created a domain with PointBase Pools. I have realized a small process with a Message Broker. Cool, it works.
Second, I had created a domain with Oracle Pool and like the first step, I had realized a small application.
With Oracle Pool, I have just the error message : "<The Message Broker is not initialized>"
Any ideas ? With the wizard, I have tested pools and created WLI tables.
I work with WLI SP4 and Oracle 9i.
Thx for your help !!

I resolved my problem.
In fact, When I have created a new domain with the wizard, I defined two server : one for console and wli and an other for ejb session witch is called by WLI EJB Control.
For a another test, I have created a new domain with a stand alone server.
After that, I add the server, pool and datasource with console admin and it works !! I have not the problem with message brocker.
I think my problem come from the wizard definition of a server who is not use by wli.

Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Whenever messages created in XI, initially it will go to error status

Similar Messages

Maybe you are looking for