Where do I get a list of the commands for the MSO 4104 USB port (*STB? for example)

I am trying to use the Tektronix MSO 4104 scope as part of an instrumentation setup. I have installed the Labview drivers and everything works great except for one thing. I am using the trigger mode. The MSO4104.lvib: Wait for Operation Complete.vi only waits for the the scope to finish setting the parameters that I have sent to it. The Wait for Operation Complete.vi sends the *STB? command and looks for bit 5 of the return message to see if the scope has finished setting up its parameters (the scope returns a decimal 96). If the scope hasn't triggered and stored the waveform, I don't get usable data back. What command do I send to see if the scope has been triggered and the waveform is ready for transfer to the Labview application?
Where do I find a listing for the commands and status messages for the scope? I can see the use of *CLS, *OPC, *STB? and other commands, but where can I get a listing? I am going to put in a query on the Tektronix site also. If I had a listing of commands and status formats, I could get things done.

I think that your best bet for finding that information is going to be the programming guide for your scope, so asking Tektronix will likely be more helpful than asking NI. If the scope is programmable, it should have come with a guide listing all of the commands and queries. Can you look on the Tektronix website for your scope and see if they have the programmer's guide available for download? I think they often do.
Good luck!

Similar Messages

Where can I get a list of available selection for certain dict type?

Where can I get a list of available selection for certain dict type in code? For instance, when I use SE16 to view VBFA table, I am presented with many filter criteria. One of them would be "VBTYP_N". When I click on the square next to the option, I am presented with a list of possible values to select from. Where can I get the list of this possible values for any given dict type in code?

Hi Frank,
The list of possible selection you see can be from diferent sources
1) Search helps defined either programatically or search helps defined at table level.
If it is a Z Selection screen check the program, then the data declaration of the parameter
2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
3) Fixed values at Domain level ()
Please refer to this link as well for detailed explanation
[http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

Where can I get a list of Jdeveloper's hotkey?

Hi:
I have a bit of question
Where can I get a list of Jdeveloper's hotkey
Just like Eclipse
Thanks
Message was edited by:
user637784

There is a list of keyboard short-cuts in the online help under the accessibility section:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.keyboardaccess/vtTopicFile.using_help%7Cada_rfeaturessupported%7Ehtml/
The default one is here:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3?topic=ide_rkeymapdefault_html
And if you are coming from an Eclipse background you might also want to read this:
http://blogs.oracle.com/shay/2007/05/30
http://blogs.oracle.com/shay/2006/09/12

Where can I get an Html error report of all the syntax and tag problems?

Where can I get an Html error report of all the syntax and tag problems?

Thank you for your answer.
Where is the DW validation for me?
My files are in my computer so I don’t have an external URL.
File > validation > as xml = closes DW... Maybe because it is not a correct command for HTML,
And
Window > results > validation = gives a partial mistakes (e.g. shows an open tag without closing tag, but doesn’t show a closing tag without an open tag).
Thank you.

My ipad (3rd generation) charger suddenly stopped working? I live in Singapore so there isn't an official apple store. Does anyone know where I can get it(charger) fixed/replaced? By the way, I got my ipad from the online store. Please and thank you

My ipad (3rd generation) charger suddenly stopped working? I live in Singapore so there isn't an official apple store. Does anyone know where I can get it(charger) fixed/replaced? By the way, I got my ipad from the online store. Please and thank you

Currently there are 15 Apple Premiun Reseller in Singapore; you can find your nearest reseller here:
http://www.apple.com/sg/reseller/searchtips.php?location=

In OS 10.7.5, how do I get a listing of folders similar to the "directory tree" that I used to have when I was suffering through MS-DOS?

In OS 10.7.5, how do I get a listing of folders similar to the "directory tree" that I used to have when I was suffering through MS-DOS?

I'm not quite sure what it is you are looking for, but there are a three different ways to view the files and folder in a directory in Finder - Icon view, List view, or Column view - or you can use Terminal and use the various options for the ls UNIX command for listing a directory. For those options, see:
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ls.1.html
Hope this helps.
Regards.

Since upgrading to Firefox 4.0 I keep getting the error message "THERE WAS APROBLEM SENDING THE COMMAND TO THE PROGRAM", please can you advise how I get it to stop?

I have just upgraded to Firefox 4.0 and ever since then I get this message when I try to go to either Yahoo or Gmail
"THERE WAS A PROBLEM SENDING THE COMMAND TO THE PROGRAM",
I had this problem a month or so ago so downgraded to Firefox 3.6 and the problem went away but have now been advised to upgrade which indeed I have and hey presto the error message again, please how can I fix it??

OK, you seem to be running Zone Alarm as your firewall. It includes a utility which checks to see whether a site is safe or not and also adds a plugin to Firefox which is listed as '''npFFApi'''. Can you disable that and see if it makes any difference?
To get to the plugins manager, click the orange Firefox button, then click "Add-ons". In the page that opens, click the "Plugins" link on the left which will open the menu. Then find '''npFFApi '''and click the "''Disable''" button.

Where do I get a copy of dos I can put on a USB?

Where do I get a copy of dos I can put on a USB?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

When going to a website from the desktop I get the followi ng message. "There was a problem sending the command to the program" Even though I get this messge, it still connects with the website/

When going from the desktop to a website, I get the following message. "There was a problem sending the command to the program" Even though I get this message, I still connect to the website.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

See:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

I keep getting a message saying "There was a problem sending the command to the program". What is wrong?

For about 1 week now i have been getting the same message now allowing me to send or open. It says "There was a problem sending the command to the program." Why? I cannot even answer your email asking for to confirm my email question. It will not allow me to access you when I click on the line you tell me to click on. How come?

Click here and request assistance.
(87825)

I keep getting this error message, there was a problem ending the command to the program, what do I do?

Since upgrading to Firefox 4.0 I keep getting the error message "THERE WAS APROBLEM SENDING THE COMMAND TO THE PROGRAM", please can you advise how I get it to stop?

Security software on your computer/router is the usual cause of this. Turn off/disable or uninstall all anti-virus software & firewalls. Try again.

There was a problem sending the command to the program is a pop-up I get ever since I upgraded

"There was a problem sending the command to the program"...this is a pop-up every time I want to load certain programs (facebook specially). This started when I upgraded to the current Firefox.

How do I get a solution to this problem?????

Where do I get a list of the commands for the MSO 4104 USB port (*STB? for example)

Similar Messages

Maybe you are looking for