Where does the data of health service watcher node gets stored in OperationsManagerDB/DW ?

Hi,
We have integrated SCOM 2007 R2 to some third party tool which takes the data of health service as the component from OperationsManagerDB/DW and shows the availability of each server in graphical format. But we have noticed that due to some issues with health
service, the availability gets affected. Hence, we have thought to add the data of health service watcher node as a component in that tool than
health service only. But we are unable to get the exact location of health service watcher in OperationsManagerDB/DW.
Could anyone please help me with the location of health service watcher node data in
OperationsManagerDB/DW.
What is the table name where the data of health service watcher node gets collected in OperationsManagerDB/DW.
Thanks in anticipation.

Hi,
A watcher node is an agent that runs monitors and rules that test an application or feature on another computer.
A watcher node can either be the agent with the application or feature installed, or it can be a separate agent. If the watcher node is a separate computer, in addition to ensuring that the application or feature is healthy, the watcher node can validate
that clients can connect to it and test such additional features as security, network availability, and firewalls.
I think according to applications monitored, watcher node is configured differentlly, the below article is talking about lync watcher node, you may want to check it:
http://technet.microsoft.com/en-us/library/jj204943.aspx
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.

Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu

Where does the data come from which powers the ship date and delivery date

Hi All,
Please let me know, where does the data come from which powers the ship date and delivery date?.
Adi.

Hi,
DELIVERY DATE will be maintain in the SALES DOCUMENT TYPES in VOV8 in the tab REQUESTED DELIVERY DATE/PRICING DAE/PURCHASE ORDER DATE.
The field is PROPOSE DELIVERY DATE .
If you check the field then the document created date will be the Requested date and will be carried from ORDER TO DELIVERY.
If you want the delivery date other thann the CURRENT date then you have to maintain the LEAD TIME in days in the same tab.
SHIP DATE: is the date on which you do the PGI in the delivery .
Please check them and revert back if u need further details
thanks,
santosh

Where does the date come from when using Tip type = dateFormat

Hi,
Can anyone tell me when using personilizations where the date that is shown comes from when using tip type = dateFormat? Today it shows (example: 24-Sep-2012) but yesterday it was the 23rd so seems to increment by one day. Is there a way to change the date shown here, to sysdate for example?
Thanks

Hi,
You can check Inline Messaging, Tips, Hints and Bubble Text section in OA Framework Developer Guide
Thanks,
Jit

In sqlplus after a bad compile where does the show errors data exist?

I am creating an automated deploy of code for project releases. In sqlplus I use the whenever command for sql errors but it doesn't catch bad compiles. When the process runs it runs as a dba user having the stored procs fully qualified causing the compile error not show in the user_errors but in all_errors. While experimenting I saw that another user could get a new record put into all_errors but my session when in sqlplus I still see the error from my compile from SHOW ERRORS. My question is where is the data from the show errors in my session stored and is it available for me to query so I can check for compile errors within sqlplus?
Hope that was clear .
Thanks,
Ken

In sqlplus ...You are in the wrong forum. This is for Oracle Forms.

SCOM Health Service Watcher / Server Availability...

Good morning all,
I'm reasonably new to SCOM reporting and have only recently started to take a close look at how this could be performing for my company. I understand that SCOM reporting is a vast and complex beast and have also read quite a lot of questions posted in forums
that are not a million miles away from what I'm about to ask (although not quite the same).
I'm looking to produce a report that reports upon the reachability / actual uptime of each monitored server. I've selected my date range and added the health service watcher for each of my servers, indicated what I consider an outage to be (unplanned maintenance
and monitoring unavailable) and produced the report. The result is confusing me. For around 2/3's of our monitored infrastructure I'm viewing what I expected to see... around 99% uptime with the "health Service Heartbeat Failure" and "Computer
Not Reachable" monitors having detected some downtime (power cycles following application of Windows updates). However, around a 1/3 of our infrastructure isn't reporting any downtime what-so-ever, nothing detected by the "health Service Heartbeat
Failure" and "Computer Not Reachable" monitors which is inaccurate as these servers have been power cycled following Windows updates applications.
If anyone could shed any light on what is occurring here it would be greatly appreciated.
Thank you in advance for anyone taking the time to read this post.
Cheers.
M Tipler

Hi,
As far as I know, the heartbeat interval for agents is 60 secs by defalt, and the management server allow 3 times of missed heartbeat. So although some agents have been rebooted due to updates, the management server may not fire heatbeat alert for them.
It is suggested to run SQL query to get all heartbeat failure on all agents:
SELECT
TOP
[AlertName]
,[BaseManagedEntity].DisplayName
FROM [OperationsManager].[dbo].[Alert]
JOIN [OperationsManager].[dbo].[BaseManagedEntity]
ON [ALERT].BaseManagedEntityId=[BaseManagedEntity].BaseManagedEntityId
WHERE [ALERT].AlertName
= 'Microsoft.SystemCenter.HealthService.Heartbeat'
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

HT201364 My imac running OS 10.6.8, and want to install software that needs OS10.7. The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac". Older upgrade better? How to proceed?

My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
I feel an older upgrade than Maverick might be better for my machine?
Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
How to proceed?

Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Random Vectors/images color inverted in print, but not in PDF. Where does the fault lie?

Sent a PDF to the newspaper printer and some of the images had inverted/strange colors. However...
In one case I had duplicate images of a pink vector flower. SOME of the flowers were inverted, to a dark blue/black, and some were fine(pink). These were embedded vectors.
In other instances vectors, went from orange to blue/black, pink to blue/black, and yellow/white to blue black. I specify because in one vector image, a ring, the ring was yellow, but the diamond was white, and it all changed to the same blue/black in print.
Finally, there were two greyscale Tiff photographs of a pair of ladies. These are not embedded, and have not been altered at all and since the last time this paper has been printed, (which printed fine). This time, they were inverted. Nothing else on the page was inverted.
As far as I can tell, there is not a separation issue, and I have saved the file from InDesign CC to pdf using the same settings as dozens of times before. The pdf on my end looks fine. The printer says they just print what they receive, but as far as I can tell, there is no issue on our end. The fact that some duplicated images printed fine, and others did not seem to confirm this. Everything is properly linked. Has anyone else experienced this problem? Is this a pdf, InDesign, or even an adobe problem at all, or it is something on their end? I have heard of inverted colors before, but can't find a solution (especially as I can't even see the problem on my end.)
Using Windows 8, up-to-date InDesign CC, and Acrobat Pro, Illustrator CS6 ver.16.2.0 64bit
I have no idea what the printer uses.

Where does the fault lie? - in an environment where they (the newsprinter) collect up front, have no responsibility for quality and arrogantly believe, perhaps correctly, that you'll be back with another paying job in the future.
Check the file you sent via Acrobat Preflight or Output Preview for RGB elements.
Check the file you sent via Acrobat Preflight - Checks - For Transparency Used
Do any of these elements off color involve rgb or interact (with or near) any transparency?
(InDesign could show these attributes via the links panel or a Live Preflight. Both can be (probably should be in your case) changed via the PDF Export)

When I transfer photos from my camera to my computer, where does the computer store them?

When I transfer photos from my camera to my computer, where does the computer store them?

Assuming you're using iPhoto 09 or later.
By default the photos are stored in the iPhoto Library in your Pictures Folder.
The iPhoto Library is a Package File. This is simply a folder that looks like a file in the Finder. This is a simple protection from users inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Want to look inside? Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things,, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
As an FYI: There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Where does the ipad back up stored

where does the ipad back up stored

iTunes places the backup files in these locations:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start > Run. Type %appdata% and click OK.
Windows Vista Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start, type %appdata% in the search bar, and press the Return key.
Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, move the cursor to the upper-right corner, click the magnifying class, type %appdata%, and press the Return key.

Where is the data held in Max 3.0

Hi,
Not sure if this right place to post this but as MAX 3.0 was installed with labVIEW 7.0.....here goes..
With Max 2.0, the data assoicated for GPIB, VISA and IVI was held in two places, IVI.INI and VISACONF.INI.
Now Max 3.0 arrives, so where has the data gone. There still is an ivi.ini but it doesn't contain all the data. Visaconf.ini still seeems to be the same.
I can still see most of the settings for drivers, logical names etc when I launch MAX 3.0, that used to be in my old ivi.ini file. So where does it store them now.
Also, what has happened to the default settings that used to be defined for a logical name?
Looking, in the MAX folder there are a load of LV VI's in the MAX\Assistants\LVCGen, what are these used for
I have looked, at the Max help but its a bit vague.
Can anyone shed some light.
Regards
Ray Farmer
Regards
Ray Farmer

Hello Ray,
With installation of LabVIEW 7.0, you have also installed MAX 3.0 and IVI Compliance Package 2.0. The IVI Compliance Package (ICP) 2.0 is a software package that contains IVI class drivers and the support libraries necessary for the development and use of applications that leverage IVI instrument interchangeability. The IVI Compliance Package also is based on and is compliant with the latest version of the instrument programming specifications defined by the IVI Foundation.
One of the most prominent changes between previous IVI products and the IVI Compliance Package is the way that the IVI Engine, IVI MAX configuration utility, and other IVI products included in the IVI Compliance Package access and store configuration information. The Configuration Server provides
a database for storing configuration data and an API for accessing this data.
This database is called the Master Configuration Store. Various IVI products have been redesigned to work with the Configuration Server instead of the previous method, which involved using the ivi.ini file.
If you have any configuration information stored in the ivi.ini file, the installer converts the existing ivi.ini data into a new format that is used by the Configuration Server and stored in the Master Configuration Store file (IviConfigurationStore.xml). This conversion process, which takes place when you install the IVI Compliance Package, removes the converted items from the original ivi.ini file as it places them in the Master Configuration Store database.
The installer also creates a backup copy of the ivi.ini in the same directory as the original ivi.ini.
If, after you install the IVI Compliance Package, you run an older specific instrument driver installer that adds entries to the ivi.ini file, you can convert the newly installed configuration data by running MAX, which monitors the ivi.ini file for changes. If MAX detects any changes, it launches a conversion utility automatically before loading the configuration from the Master Configuration Store file. Also, you can run the converter utility manually by selecting Start�Programs�IVI�Tools�INI to XML Converter.
There are a few KnowledgeBase entries on ni.com on this topic:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/b83c7bbd43fd855486256cd10077ef06?OpenDocument
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/72f3656387deaefa86256d180062862c?OpenDocument
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/33b3f3ea0f305a3386256d170064f02d?OpenDocument
You can also find more information in the ICP Release Notes.
I hope this helps.
Regards,
Vesna Jadric
Instrument Drivers/IVI

Where does Master Data Store?

Hi All,
Where does Master Data Store?
What are limitations while deleting master data?
<b>All the answers will be rewarded with points.</b>
<b>Regards,
Jackie.</b>

Hi,
Master Data is stored in the tables that are generated when you activate the Charachteristics...
You can see the tables in the infoobject maintenence ...
There are tables for Mater data Text, Attributes and hierarchy....
e.g. /BI0/TMATERIAL is the text table. You could find it in the Master data/texts tab in infoobject maintenence.
Secondly Deletion of master data is allowed in case the master data is not linked to any Transaction data within BW. This is because in the Infocubes the SID's would be generated that would point to the masterdata tables. Hence SAP does not allow the data to be deleted incase it exists in dependent tables.
Hope it helps!!!!
Regards,
Nitin

Where does the Value of EECST gets stored

Hi,
Where does the value of EECST gets stored for the infotype p0167. How can it be retrieved from that specific infotype. - Urgent issue.
Thanks........
sk

hi,
what is EECST?
there is no such field in data dictionary.
plz specify properly or atleast u give the name of field in general that is used in pa0167 infotype so that we can help u.

HT5262 where does the information get stored when you back up your i-phone? It just reports its done but I have no idea where to find it if I need it again!

Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
Thanks

You can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage")

Where does the details of the files on usr/sap directories get saved?

hi,
when a (.dat) file is created by background job processing in the 'usr/sap/' directories, where does the details like last changed, last modified of these files get saved?
which table does these detiails get saved?
thanks,
swamy

Hi,
Transaction AL11 does exactly wat you are looking for,
it lost list of files present on the server SORTED on date and time.
and also u can use function module EPS2_GET_DIRECTORY_LISTING which contains a date/time stamp
Hope it helps u...

Where does the data of health service watcher node gets stored in OperationsManagerDB/DW ?

Similar Messages

Maybe you are looking for