Where in JCR structure future activation time or scheduled task is stored?

I am trying to check if the page is scheduled for future activation so I can notify the systems down the line. There is no direct menthod in the sling API providing a convineint menthod which tells if a page is scheduled for future activation (e.g. ReplocationStatus or any such sling class). Any idea how can I check on scheduled tasks for a page?

Can you check if below API will help you.
http://dev.day.com/docs/en/cq/current/javadoc/org/apache/sling/event/jobs/JobManager.html
JobManager will help you to find schedule job which will return an event object and from there you can travel through other information. It would be good to look at complete package
org.apache.sling.event.jobs

Similar Messages

  • Dv4-1275mx freeze for few mins and disk 100% highest active time.

               I bought a dv4-1275mx in june and about a week ago, my laptop started to freeze for few minutes and come back.In that time, i didn't do anything and when i checked Resource Monitor (already opened), i saw 100% in Highest Active time in Disk with small data read. This happened several times and when i checked the events, i found following,
    Error    6/23/2009 10:08:42 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Warning    6/23/2009 9:52:40 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Application​s\Windows\Windows.edb"" at offset 2482176 (0x000000000025e000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 1 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 84 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
    Warning    6/23/2009 9:51:15 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Application​s\Windows\Windows.edb"" at offset 2523136 (0x0000000000268000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 0 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 5515 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
    Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
               In yesterday, I got and error message after windows start saying there is a problem in svchost module.Therefore i restart my laptop and then i didn't get any error messages.Then i tried to start firefox after about 5 mins and got a error message saying it stopped by data execution prevention.After about 1 min, i got a message saying windows will restart in 1 min and in restart, it did a checkdisk.After that i didn't got any error messages but i couldn't open firefox, therefore i installed it again and i found following events.
    Warning    6/29/2009 7:26:35 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
    Warning    6/29/2009 7:26:01 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
    Warning    6/29/2009 7:25:49 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
    Error    6/29/2009 7:25:02 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
    The system cannot find the file specified."
    Error    6/29/2009 7:25:02 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
    Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    4001    None    "WLAN AutoConfig service has successfully stopped.
    Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    10002    None    "WLAN Extensibility Module has stopped.
    Module Path: C:\Windows\System32\bcmihvsrv64.dll
    Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Profiles> failed a notification event.
    Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6000    None    The winlogon notification subscriber <Profiles> was unavailable to handle a notification event.
    Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Sens> failed a notification event.
    Error    6/29/2009 7:23:47 PM    Microsoft-Windows-EventSystem    4621    Event System    The COM+ Event System could not remove the EventSystem.EventSubscription object {CEB8B221-89C5-41A8-98CE-79B413BF150B}-{00000000-0​000-0000-0000-000000000000}-{00000000-0000-0000-00​00-000000000000}.  The HRESULT was 80070005.
    Error    6/29/2009 7:22:41 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
    Error    6/29/2009 7:19:31 PM    Service Control Manager    7032    None    "The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error:
    An instance of the service is already running."
    Error    6/29/2009 7:19:31 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0xb98, application start time 0x01c9f8c04759c999.
    Error    6/29/2009 7:18:27 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X xD Host Controller' (PCI\VEN_197B&DEV_2384&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0428) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X MS Host Controller' (PCI\VEN_197B&DEV_2383&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0328) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD Host Controller' (PCI\VEN_197B&DEV_2381&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0228) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD/MMC Host Controller' (PCI\VEN_197B&DEV_2382&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0028) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:27 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x0000000000002339, process id 0xff8, application start time 0x01c9f8c023973749.
    Error    6/29/2009 7:16:26 PM    SecurityCenter    6    None    The Windows Security Center Service was unable to load instances of AntiSpywareProduct from WMI.
    Error    6/29/2009 7:16:20 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0x1c4, application start time 0x01c9f8bf81c900ad.
    Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The Norton Internet Security service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion."
    Error    6/29/2009 7:14:34 PM    Service Control Manager    7009    None    A timeout was reached (30000 milliseconds) while waiting for the Norton Internet Security service to connect.
    Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
    The system cannot find the file specified." 
    I can attach Full events if want. Is this problem comes due to an hardware or OS error? Pls help.
    Thanks. 

    I own two of the dv4-1275mx laptops.  Both machines were purchased around June of 2009 from Best Buy, and both machines are doing the same thing as what has been described here.  It appears that this model has a flaw, or certain production runs have this flaw.  I have done an exhaustive amount of research about this problem and know quite a bit about it.
    But, good luck getting HP's Customer No-Service department to actually fix the problem.  If you try to get them to fix it, you are about to be taken for quite a ride.  They have been absolutely no help in diagnosing the problem, and I am still trying to get them to acknowledge and fix the problem with these laptops.
    The problem is with the hard disk controller.  It happens both with the built-in hard disk drive and with an external disk drive.  It occurs whenever you place a significant load on the disk controller.  When the problem occurs, the machine will lock up for 60 seconds at a time.  Eventually, the driver times out, resets the disk, and drive activity continues until it happens again.
    Normally, the problem is very intermittent because normal usage of the machine doesn't always trigger this problem.  However, I have been able to replicate the problem consistently using a backup program called Macrium Reflect (free edition).  If I use Macrium Reflect to back up or restore the hard disk image using an external disk drive plugged into the eSATA port, then the ATAPI errors in the log appear immediately after it begins copying data.  Eventually, the backup will fail.
    The worst part about this is the data corruption.  If the lock-up condition occurs when a disk write is happening, then the data being written will get corrupted and you will lose data.  I have had disks that have gradually gotten so corrupted that they won't boot anymore.  I have spent a countless number of hours backing up, restoring, and attempting to use the machine despite these problems.
    After doing further research and testing, it appears that this type of problem is not uncommon to the AMD M780G / ATI Radeon 3200 chipset that these laptops use.  If you search the Internet for this type of error, you will find a number of HP and Non-HP customers complaining about this same issue with this chipset on different machines.  This leads me to believe that the problem might be with the chipset itself.
    I have attempted to find a software remedy to the problem with no success.  This included trying all of the following:
    - Trying Windows Vista 64 with various configurations of service packs and updates.
    - Using the Microsoft AHCI driver and the ATI-supplied AHCI driver for the Radeon 3200 series
    - Using different BIOS revisions
    - Trying to find a magic combination of AHCI driver and BIOS revision that would work
    - Trying various settings for disk write caching
    - Turning of DMA on the controller
    - Uninstalling every piece of HP-supplied software that I could think of that might have even the slightest possibility of interfering with the hard disk controller
    None of this worked.  Eventually, I concluded that this is a hardware problem that isn't going to get fixed through software.
    Sadly, after doing all of this research, HP has not been helpful with getting this problem fixed.  In the past, I have owned laptops from Dell and Toshiba, and while I know that no manufacturer is perfect, I have not had many issues getting prompt and reliable service from either of those two companies when I needed it.  This is the first time I have purchased an HP laptop.  And after the customer no-service experiences I have had, it is likely to be the last time I purchase an HP laptop.
    HP's technical support seems to think that re-imaging the drive to reset the machine to factory defaults cures all problems.  Over the phone, they have made me do this a couple of times, insisting that the problem is a result of a virus or something I installed on my machine.
    Recently, I sent both of my laptops to them for service.  To assist them, I included the details of all of the research that I had done.  I gave them copies of this information both electronically, and included inside the box with the laptop.  The information had details on the steps that I tried, and links to websites documenting problems with the M780G chipset.  It also had details on how to replicate the problem with Macrium Reflect.  I even re-imaged the machine back to the factory image, and installed Macrium Reflect for their convenience.  And what did HP's service department do?  They re-imaged the hard drive again and sent it back to me without even bothering to run my test!  This is just absolutely moronic.  Either the service technician can't read, or the service technician just doesn't care about fixing customer problems!
    My complaints about HP's service are as follows:
    There is no sense of urgency about fixing problems.  I have been enduring this issue for 9 months now.  But no one seems to care.
    It takes forever for them to turn around machines in their service department.  With Dell, I used to have a working laptop in my hands in 5 days, tops.  What's worse is that they ship the packages via FedEx Ground with signature confirmation.  (If you work a normal day job, good luck trying to get your package from FedEx Ground, which is only open when I am at work.)
    The telephone and online support personnel often don't listen to you, and the details of problems don't ever seem to be recorded anywhere.  I have had to explain this problem over and over for various people who seemed almost completely ignorant about the problems I have been experiencing.
    The technicians are not competent, even when you tell them what needs to be fixed.
    As far as I am concerned, HP has not been honoring the warranty on my machines.  This is has been frustrating beyond words.  I am at the point where I just want two new laptops without this chipset, but I seriously doubt I will ever get that.  To all of you who are experiencing the same issue as I am, I wish you the best of luck in getting HP to resolve this problem--you are going to need it!

  • Please suggest where I have to maintain activity type in employee master

    Hi,
    Goodevening to you.
    Can I maintain Activity Type to an Employee.
    My client is having Time Sheet entries through CATS and would like to have actual hours booked against projects as well as activity type.  Each activity type will have a different rate.  Please suggest where I have to maintain activity type in employee master.
    Regards,
    Rahul

    Hi,
    I have got the answer.  We can maintain activity type in 315 info type.
    Regards,
    Rahul

  • [svn:fx-trunk] 7830: Update ASDoc on the new backgroundFrameRate property to WindowedApplication , to by default reduce the CPU usage in cases where an app is not 'active'.

    Revision: 7830
    Author:   [email protected]
    Date:     2009-06-14 15:57:29 -0700 (Sun, 14 Jun 2009)
    Log Message:
    Update ASDoc on the new backgroundFrameRate property to WindowedApplication, to by default reduce the CPU usage in cases where an app is not 'active'.
    Bugs: SDK-21135
    Reviewer:
    QE Notes:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21135
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
        flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as

    By the way, I agree with sybrand: you need to tune
    your redo log size.
    Regards
    Ignacio
    http://oracledisect.blogspot.com
    Ignacio,
    The excessive waits on log file parallel write and the related client wait of log file sync may be due to insufficient CPU availability, and may not point at an actual redo log size problem or a problem with the disk speed where the redo is written to disk, especially if there are 3 Oracle instances on the server with a single CPU.
    Paraphrased from "Optimizing Oracle Performance":
    The log file sync wait event is one of the first events to show increased latencies due to the time a process spends waiting in a CPU wait queue while processing excessive logical IOs.
    Kevin Closson wrote a couple blog entries that examined the potential problems of insufficient CPU capacity and its effects on log file parallel write when writing to solid state disks, and even when writing redo was explicitly disabled:
    http://kevinclosson.wordpress.com/2007/07/21/manly-men-only-use-solid-state-disk-for-redo-logging-lgwr-io-is-simple-but-not-lgwr-processing/
    "Once LGWR loses his CPU it may be quite some time until he gets it back. For instance, if LGWR is preempted in the middle of trying to perform a redo buffer flush, there may be several time slices of execution for other processes before LGWR gets back on CPU..." Fix the CPU problem, and the other significant waits may decrease.
    JesusLuvR,
    yingkuan's suggestion to look at the SQL statement that performs the 4,365,564 logical IOs, consumes 186.03 CPU seconds, and has an execution time of 225.06 seconds, is likely a very good starting point. You might also want to check the value of the SESSION_CACHED_CURSORS parameter to see if it needs to be adjusted.
    Charles Hooper
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Where can i maintain the working times in shipping point?

    Hi Gurus,
    Where can i maintain the working times in shipping point?
    Thanks,
    Paul

    hello, friend.
    there are at least 2 ways to do this.
    first, go to IMG > Enterprise Structure > Definition > Log Execution > Define, copy, check, delete shipping point.  choose 'define shipping point', select your shipping point and click on the 'details' button.  under 'determine times' you will find what you are looking for.
    the other way is to go IMG > Logistics Execution > Shipping > Basic Functions > Scheduling > Delivery Scheduling and Transport Scheduling > Define Scheduling by Shipping Point.  from there, it will be the same as the above.
    regards.

  • UCCX 9.0 CAD Logout non-activity time

    I'm trying to find a way to automatically log agents out of CAD after they've been sitting idle for a certain period of time.  I know this exists from seeing it at previous jobs where I was an agent.  I've searched for any articles or forum posts I could find that give information on this and I've seen people mention a setting for "Logout non-activity time", but I'm not able to find this setting anywhere.  I've checked in CCX Administration and Serviceability, Desktop Administrator and Desktop Workflow Administrator. 
    Can someone point me in the right direction so I can get this set up?  Thanks all.

    Hi,
    the "Logout non-activity time" is a parameter in UCCE (the enterprise grade contact center solution from Cisco). I am not aware of this setting built in in UCCX.
    What you can do, however, is to set up a Workflow of time "Time of Day" and you can map an Agent State Action with Agent State Control set to Logout. I know this is not what you want but this may be close to it: you can for instance create a rule that logs out all agents at 23:00. You can even send a notification message before the actual logout.
    Note this is for UCCX premium only.
    Read the details in the "Cisco Desktop Administrator User Guide, Release 9.0", p.92.
    G.

  • Vision Builder 2010 Active time not working when calling Vision inspection from testand 2010

    I have an issue where I am timing a flashing light using the active time variable, when I run the inspection from the inspection view everything works, however when I run it from the configuration view or by calling it through teststand 2010 with the Vision Vi's the Active Time never changes from 0.00000.
    I do not need precides timings so I am NOT worried about the +/- 20ms from the windows system clock.

    Hi Ryan,
    Can you read any of the other variables using the Get Inspection statistics VI?  Is it only the Active Timer that doesn't change?
    Cole R.
    National Instruments
    Applications Engineer

  • Where can I find my activation key?

    Hello,
    I am ready to completely reinstall Mac OS 10.9 on my macbook pro in order to clean it up.
    I bought Aperture a long time ago, in a shop (not the online store), and I do not have its box (in which there is the activation key) with me.
    Do you know, before reinstalling Mac OS, where I can find my activation key in the software or in the system. I would copy it on a paper and everything would be solved.
    When I will reinstall Aperture, will it ask the key, or is it someway linked to my apple account, even though I did not initially bought it on the Apple Store?
    Many Thanks,
    Nicolas

    Which Aperture version are you currently running, Nicolas?
    If it is not an AppStore version, you need the installer DVD to reinstall. The earlier Aperture versions are best installed and not migrated.
    As to the registration key:
    Earlier Aperture versions up to version Aperture 3.4.5 will show the registration key in the "About" panel - in the main menu bar: Aperture > About Aperture.
    (added: It will only show the last registration key. If you have an upgrade key, you will need the keys of the previous versions as well).
    If you already updated to Aperture 3.5.1, you do not need your Aperture serial number any longer. Aperture will have been associated with your Apple ID and it will show on the "Purchases" tab of the App Store, when you sign into the Store menu with the Apple ID, that you used, when you updated Aperture. Check the App Store and the Purchases, before you wipe your drive.   I strongly recommend to update to Aperture 3.5.1 and to associate Aperture with your AppleID, if you have not yet done that.  Then you should be able to reinstall from the AppleStore.  But keep a backup copy of Aperture 3.5.1 just in case, since the current version at the AppStore is Aperture 3.6, that will require Yosemite.

  • How to improve the activation time for a standard DSO

    Hi all,
    I'm facing an issue related to the activation of a DSO. The SM37 log is as follows....
    12:03:16 Job started
    12:03:16 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
    12:03:20 Attivazione is running: Data target ZFIZIASA, from 93,627 to 93,627
    12:18:00 Overlapping check with archived data areas for InfoProvider ZFIZIASA
    12:18:00 Data to be activated successfully checked against archiving objects
    12:18:02 Status transition 2 / 2 to 7 / 7 completed successfully
    12:18:13 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218130
    12:18:19 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218190
    12:18:20 Parallel processes (for Attivazione); 000003
    12:18:20 Timeout for parallel process (for Attivazione): 000300
    12:18:20 Package size (for Attivazione): 020000
    12:18:20 Task handling (for Attivazione): Processi batch
    12:18:20 Server group (for Attivazione): Nessun gruppo di server config
    12:18:20 Activation started (process is running under user BWREMOTE)
    12:18:20 Not all data fields were updated in mode "overwrite"
    12:18:20 Process started
    12:18:20 Process completed
    12:18:20 Activation ended
    Please have a look into the bold 3rd & 4th line. I couldnt able to analyse where the issue is and what to do to minimize the time for activation.
    It is very challenging, please reply!
    Please help.
    Thanks in adv.
    Ajay

    Hi Kundan,
    Thanks for the response!
    Actually, I have two identical DSO, having all the char & KF same and feeding the data from same DS at the same time but the issue is...
    1) For 1st DSO, Activation log....
    01.07.2010 02:02:41 Job started
    01.07.2010 02:02:41 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
    01.07.2010 02:02:46 Attivazione is running: Data target ZFIZIASA, from 93,751 to 93,751
    01.07.2010 02:19:27 Overlapping check with archived data areas for InfoProvider ZFIZIASA
    01.07.2010 02:19:27 Data to be activated successfully checked against archiving objects
    01.07.2010 02:19:27 Status transition 2 / 2 to 7 / 7 completed successfully
    01.07.2010 02:19:28 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICC6UMXYT00Z2DYOQV8QL8CJ with ID 021
    01.07.2010 02:19:30 Parallel processes (for Attivazione); 000003
    01.07.2010 02:19:30 Timeout for parallel process (for Attivazione): 000600
    01.07.2010 02:19:30 Package size (for Attivazione): 020000
    01.07.2010 02:19:30 Task handling (for Attivazione): Processi batch
    01.07.2010 02:19:30 Server group (for Attivazione): Nessun gruppo di server config
    01.07.2010 02:19:30 Activation started (process is running under user BWREMOTE)
    01.07.2010 02:19:30 Not all data fields were updated in mode "overwrite"
    01.07.2010 02:19:30 Activation ended
    2) For 2nd DSO, the activation log is..
    01.07.2010 02:01:13 Job started
    01.07.2010 02:01:13 Step 001 started (program RSPROCESS, variant &0000000006947, user ID BWREMOTE)
    01.07.2010 02:01:35 Attivazione is running: Data target ZFIGL_02, from 93,749 to 93,749
    01.07.2010 02:01:43 Overlapping check with archived data areas for InfoProvider ZFIGL_02
    01.07.2010 02:01:43 Data to be activated successfully checked against archiving objects
    01.07.2010 02:01:53 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015300
    01.07.2010 02:01:54 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015400
    01.07.2010 02:01:56 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015600
    Now my client is asking to lower the activation time for 1st one as it is taking for 2nd one.
    I'm toatally blank now that what & how to do it!
    The volume of data ...
    ZFIZIASA
    Active table - Number of entries: 13.960.508
    Change Log Table - Number of entries: 13.976.530
    ZFIGL_02
    Active Table - Number of entries: 21.923.947
    Change Log table - Number of entries: 21.938.657
    Thanks,
    ajay
    Edited by: sap.ajaykumar on Jul 6, 2010 1:47 PM

  • Architectural structure of ByD time sheet from Home - Self-Services

    Hello,
    I need some information about the architectural structure of the time sheet from the ByD self services. Concretely I need to know which BOs represent the base of the time sheet and whether it is possible to use their services in self generated Web Services.
    My requirements are to create a Web Service, which on the one hand delivers allready submitted working times to an external application, and on the other hand receives new entries from the external application.
    Because there is a difference in submitting working times related to a project task or just to an activity I need additional information on the BOs and services which are used by the standard time sheet to retrieve the available project tasks and work activities.
    Many thanks in advance for your help.
    Regards
    Eugen Dojan

    Edited by: Eugen Dojan on Dec 23, 2011 4:22 PM

  • 100% disk active time, how to analysis the reasons

      my server has only run on low workload, but get 100% active time, how can i determine which program cause it , thanks,
    server 2012R2, latest update

    Hi SpaceTime_L,
    The IO performance issue can caused by many reasons, generally we can first run CHKDSK to check whether have bad sectors. Other information from your figure it show the response
    time is very high this is also a serious I/O bottleneck, please first check whether have misaligned disk partitions, it also is the common issue can cause unnecessary disk I/O at the hardware level for disks.
    You can refer the following related article to do the further troubleshooting.
    PerfGuide: Analyzing Poor Disk Response Times:
    http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
    Monitoring Disk Usage:
    http://social.technet.microsoft.com/wiki/contents/articles/3214.monitoring-disk-usage.aspx
    PerfGuide: Analyzing Poor Disk Response Times:
    http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
    How to Monitor Disk Performance with Performance Monitor:
    http://support.microsoft.com/kb/102020
    DISK_PERFORMANCE structure:
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa363991(v=vs.85).aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Sort Key .... where we can see the activity in GL, Vendor, Customer mater

    Hi gurus,
    what is the use Sort key,
    where we can see that activity.  in GL Accounts, Vendor, customer master sort key where we can see effects. what is the use, how it will sort, where i can see.
    Thanks  for your reply.
    Anil

    Dear Anil,
    Sort key is the one that fills the "Assignment field" of a line item automatically.
    For example, for the GR / IR accounts, we normally give the "Purchase Order" as the sort key. This will make the line items in the GR/IR account to be filled with the Purchase order and the Item number.
    The automatic clearing (F.13) works with the assignment field. In case the net of two line items (Dr - Cr) is equal to zero and the assignment field of these two lines are the same, then the system will automatically clear these two lines. Hence "Sort key " fills the assignment field and is very useful in automatic clearing
    regards
    Venkatesh
    Assign points if useful

  • Where can i get my activation date ,...or first startup phone,..because i lost my warranty and my carier free unlock my iphone 3gs after 24 month

    Where can i get my activation date ,...or first startup phone,..because i lost my warranty and my carier free unlock my iphone 3gs after 24 month!
    tank you

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    . Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Column Activity time of DB2 Thread Activity is sorted improperly

    Dear Thomas!
    There is a small but annoying problem... The column of "Activity Time" in "Thread Activity" ALV table is not sorted properly.
    The field of "ACTTIME" contains time amounts in two different formats if the amount includes days or doesn't.
    The note 1280173 doesn't correct the problem. Even after this note the column sorted in the descending mode looks in such a way:
    12:13:14.156789
    099d 12:13:14.5      
    07:24:34.157890
    030d 12:13:14.5      
    020d 12:13:14.5      
    01:24:34.157890...
    The desired format (even with "d" for days):
    d099 12:13:14.5      
    d030 12:13:14.5      
    d010 12:13:14.5      
    12:13:14.156789
    07:24:34.157890
    01:24:34.157890...
    It is an ALV table and its numerical fields are displayed as right-justified and character fields as left-justified despite leading spaces. A correction is required, either in the sorting routine or in these values presentation.
    Best regards,
    Vlad

    My advice: Don't hold your breath.
    SAP Note 1280173 is for BC-DB-DB2, aka DB2 for z/OS. Since this platform has at best 1% of the SAP market share, I would not expect such a small non-critical annoyance to be fixed quickly. That is just based on my limited experience with SAP on Z. SAP probably has bigger issues to solve on platforms with far more market share.
    We're still waiting for the recommended runstats and reorgs to work with a schema other than the ABAP stack's SAPR3. At the moment, DSNACCOR is able to feed SAP all recommended runstats and reorgs, but SAP can only handle the ones with SAPR3. The others (including SAPJAVA) are ignored. We were first promised that this would be fixed in SAP_BASIS 7.00 SP17 and had to wait 6 months for this SP to be released after we identified the deficiency. It was NOT fixed in SP17. Now we are told the runstats piece MIGHT be corrected in SP18 (due out February 2009) and the reorgs MIGHT be corrected in SP19. We will have been waiting well over a year for this basic functionality that works with other supported SAP DB platforms.
    Best of luck!
    Brian

Maybe you are looking for