Where is my Lightroom? I just updated, and it disappeared!!

I just updated my Lightroom, and it has disappeared from my desktop. Where did it go? How can I get it back?

Don't go Jim, they maybe on a PC and I have no idea about shortcuts on them.....
JimHess wrote:
Well, I guess it's time for me to step out of here. That shows you how much I know about Mac computers.

Similar Messages

Just updated and restored ipad but the ipad stays on the same screen??

well i just updated and restored my ipad and on the ipad it says connect to itunes so i did that and it backed up and synced like a billion times but the ipad screen just stays the same saying to connect to itunes with that picture of the usb thingy with an arrow blah blah
did i do something wrong :/?

then chk on the usb link
try to change the port

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
Operating System OSx Yosemite IMac.

What exactly does "not recognise" mean, Kathy?
You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

Have just updated and can't get into iPhoto, wants to know which library I want to open from a list with nothing in it - any ideas?

I have just updated and iPhoto won't open - wants to know which library to use from a list with nothing in it - any ideas?

Updated what? Did you make a back up before?

I just updated and restored my ipod and now it wont restore again, so i can use it?

I just updated and restored my ipod and now it wont restore again, so i can use it?

See:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

I just updated and I've lost my read it later function and all the articles I was saving. What happened?

I just updated and I've lost my read it later function and all the articles I was saving. What happened? I'm very unhappy about this. Please help.

Says its compatible with 4.0. <br />
https://addons.mozilla.org/en-US/firefox/addon/read-it-later/

I just updated and synced my phone and now all of my music and apps are missing from my phone and my computer! *** do I do?, I just updated and synced my phone and now all of my music and apps are missing from my phone and my computer! *** do I do?

now all of my music and apps are missing from my phone and my computer! *** do I do?, I just updated and synced my phone and now all of my music and apps are missing from my phone and my computer! *** do I do?

i had the same fright
The update takes a LONG time... but with the new system, you can keep using your phone during the update, so it doesnt FEEL like it is updating...
you have probably interrupted the update, just like I did
plug your phone in... "continue the update" or hit the sync button to psh it in... and leave it there
unless you have enabled sync over wifi (which still only works when you are plugged in)
just be patient... and there shouldbe a flashing "synching" symbol at the top of your phone screen

Can't open documents - File select screen just flashes and then disappears

In Adobe Creative Suite 3 Design Standard - When I open Photoshop, Illustrator, etc. and then try to open a document from one of these programs, the screen where you would select the file to open just flashes and then disappears. This locks me out of the program because it is waiting for a response from me - I can't even exit the program. I have to go to the Task List and close the program from there. This is a new issue - Have had Creative Suite for a while. Does not happen in Word, Excel, etc. I have already tried removing and reinstalling the software - No change. I have minimized all other windows - Still cannot access the file selection screen.

If you have an LCD monitor, make sure it is running at its maximum resolution. After the dialog disappears, try pressing Alt + Spacebar, then M and see if you can find it on the edge of the screen and move it in by pressing arrow keys, press one a few times, then the opposite to bring it back if it didn't show up.

I just updated and downloaded the new version of iTunes. I then downloaded some music and now the music won't play on my iPod or in my iTunes. The tracks play for a few seconds and then skip to the next track

I just downloaded and updated the newest version of iTunes. After updating I downloaded some new music and synced the iPod. The music doesn't play. It'll play about 30 seconds of the song and then skip automatically to the next song. I restarted the iPod. I restored it. It still didn't work. Then I tried listening to the music from my laptop straight from iTunes...and it's still doing it.
How do I fix it?

I'm assuming the tracks that won't play copy/are displayed with exclamation marks. This happens if the files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Where do I find SPARCengine AXi Update and Release Notes?

I'm looking for the OBP updates, and all release notes for the updates, so that I can flash the two I have recently obtained and add the intervening release notes to the manual I printed out for the boards.
Also, I'm looking for the OBP dropins compatible with the SPARCengine AXi.
I've tried SunSolve, but haven't really turned up anything close.

Well, I was playing around with FreeBSD initially on the 4 gig disk that did work, but there are a lot of things in the FBSD ports tree that need work to get going on the SPARC. I love FBSD, and run it on intel boxes, but work is needed on it.
I may devote one of the 18 giggers (when I get another SCSI cable, or an external case) to FBSD to do some porting work for the project...
Anyhow, I have successfully installed Solaris-SPARC-u1 on it, and the only problems I saw were in the freeware, where stuff like emacs would coredump on exit (from the package), or fail to compile (segfault on the blessmail module).
I have just installed Solaris-SPARC-u2 (6/06) on it today, and so far have no issues, but I do want to test the issue with emacs again.. I'll be pissed if emacs has issues on this, vi sucks (EMACS makes the sun shine! EMACS makes the birds sing! EMACS makes the grass grow green! It's a pretty good editor too!).
By "RTC" I mean the RealTime Clock / CMOS battery-backed NVRAM / IDPROM chip. Refer to the OEM Technical manual for the AXi for details on where it is on the board. They are field replacable and socketed.
The RTC in the AXi board is a SGS (ST) M48T59Y, and you can find the datasheet at: http://www.st.com/stonline/products/literature/ds/7001.pdf and you can find out how to replace it, and reprogram your hostid and MAC, etc at: http://www.squirrel.com/squirrel/sun-nvram-hostid.faq.html the chip is avaqilable from Mouser Electronics, probably Digi-Key as well, among others. Keep in mind they have an embedded lithium cell, and have a lifespan between 7 and 10 years.
As far as fans, I have 300 MHz CPUs in these right now, until I can find the Sun fans and mounting brackets... In the meantime, the fans are connected to the main power supply directly. As far as LEDs, I don't see how that could cause a problem, as a reverse-biased diode simply won't pass current.
Anyhow, I have had some cheap fans fry intel motherboards when they die and freeze up, so, I think I'll even direct-connect the CPU fan to the power supply when I get some of the 440's...
As for Solaris 10, I don't have any problems other than the one issue, but I do have one issue launching from a remote Xnest on my PC, but, for some reason, it works fine when I use the kdm remote login from the main kdm login screen on my pc. For some reason Xnest will do the dtlogin stuff fine, but it will never launch CDE and immediately go back to the dtlogin screen. The answer might be in the Xservers file in the /usr/dt/config directory, but it uses some wierd bastardized form that isn't standard Xservers, and will coredump dtlogin if it isn't in the form expected. I think the key is in finding out what the hell "Class" a foreign Xnest is.
Anyhow, I'm having fun, and only have one more complaint.. I can't set the font size on anything other thant he output and editor windows in Sun Studio 11 (which I also installed today). IMHO, the fonts are a bit small.

My mother and I share the same iTunes account for our iPhones I just updated and back up my iPhone to my computer why is my mom getting all my text messages

Why is my mom getting all my messages I just update my iPhone and back it up to my computer and now she is getting all my messages this has happens before when my little sister first got her I touch she was always getting my messages

Have a look here...
setting-up-multiple-ios-devices-for-messages-and-facetime.html

I have just updated and synced my ipad and some apps have just disappeared, not even on laptop/? solution or lost for ever, I have just updated and synced my ipad and some apps have just disappeared, not even on laptop/? solution or lost for ever

I have just updated my ipad and synched to my laptop. Now I am missing some apps. Are they gone forever, or can I retireve them? why does this happen?

Downloading past purchases from the App Store, iBookstore, and iTunes Store

I've just updated and can't seem to find anyway to burn a DVD?

Ive just installed Mavericks and the latest imovie update and initially it lloks good but there doesnt appear to be any way to finalise and then burn the movie to DVD?
It plays fine in theatre and there are share options to Utube, facebook, e mail etc. but no export option which seems strnage am I missing something?

Apple no longer officially supports iDVD, but it still works just fine.
In iMovie go to File>Share>File, choose the size (probably should choose either SD or Large) then click Next, give it a name, then click Save.
Wait till the activity indicator shows that the video has been fully exported (could take a while depending on the size of the movie and the speed of your processor).
Go to iDVD. Go to File>Import>Video and select the file you just created. It will bring the video into your iDVD project.
This was always the way I did it in the previous version of iMovie. Works just fine.

Just updated and: aperture can't update library

just updated from Ap 2 to 3 and got the following error message: The library in “/Users/name/Pictures/Aperture Library.aplibrary” cannot be upgraded.
Any ideas?

The library in “/Users/name/Pictures/Aperture Library.aplibrary” cannot be upgraded
Is that the full error message you get? Are there any additional messages in the Console window? Any crash logs?
Backup your Aperture 2 library, if you have not done so and rename it from the default name, so that Aperture 3 will not overwrite it, by accidentally creating a new library.
Your Aperture 2 library may have a corruption. To repair this, try to repair the permissions and rebuild the library with the "Aperture library First Aid Tools". This would best be done with Aperture 2, if you have saved your Aperture 2 application, see the "Release Notes" (at the bottom of the page, additional information).
If you no longer have Aperture 2, try the repair with Aperture 3:
Hold down the option-command-key combination⌥⌘, while you double click your Aperture library.
Then select "repair permissions" from the First Aid panel, followed by a "Rebuild Library".
Regards
Léonie

My PC just updated and now my headphones jack doesn't work. Why is this?

Everything was working fine until the update and I have no clue what updates were done. It was the mass that update when you go to close down the system. I have a HP Pavilion dv6-3250us.

Hi,
Restore system to this point where you remember that everything was working without any problems.
Resource:
How to Do a System Restore in Windows 7
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Where is my Lightroom? I just updated, and it disappeared!!

Similar Messages

Maybe you are looking for