Where is my list of linked devices?

Where I can find what devices are linked to my Apple ID account?

OK, my bad. Do this instead:
On your computer open iTunes. At the top of the screen you will see Store (in between "Controls" and "Window"). Click on Store>View Account>then type in your password to view your account information.
Once the info screen opens, you will in the section called "iTunes in the Cloud" an option to Manage Devices:
Clice on the Manage Devices option and you will then see a screen listing all of the Devices/Computer associated with your Apple ID:
You can selectively remove the devices/computers you no longer want associated with your Apple ID.
Cheers,
GB

Similar Messages

Where is the list of connected devices, their MAC id's,and IP addresses

I used to be able to see list of devices connected to my airport extreme, including their MAC id's and IP addresses. I can no longer find that anywhere. Have they removed that information for AirPort Utility?

Open AirPort Utility
Hold down the option key while you double click on the AirPort or Time Capsule icon
Wireless clients will appear. Click the arrow next to each client for additional information about the MAC address, connection quality, etc.
Or, you can simply click on the AirPort or Time Capsule icon in AirPort Utility and then look for Wireless Clients. Click each client for more info.
Ethernet clients do not appear in the newer versions of AirPort Utility.

Apple should have a registry where you can list your device as stolen so if the thief tries to register the device, it can be located.

Two days ago, I left my New iPad on a plane. My bad, I know. However, whoever sat in the seat after me, helped themselves to a brand new iPad and did not turn it in to the airline. So far, Find My iPad has been no help. The device appears offline. I feel fairly sure that whoever took it has at least turned it on. I've sent messages but no one has called. I've also done a simple search to see how difficult it would be for someone to reset the device to factory and there are plenty of websites giving instructions on how to do that. At any rate, I registered my device with Apple, which includes the serial number of the device. If Apple had a registry where I could list it as stolen, when the culprit attempts to register the device, Apple would flag it as stolen and perhaps it could be recovered. I appreciate the "Fine My iPad/iPhone" app for when I misplace one of them in my own home or office, but in this case, it was no help at all. I only had my new iPad for about a month and now it's gone. I will buy a new iPad because I love it and really use it alot, but I'll be afraid to take it anywhere. What's the point of having a mobile device if you are afraid to take it anywhere?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

How to Open a New window from a List region Link, Please help

I am trying to get a new full window( Not popup window) open from a list region link. The list region entry is an Image. I get the new page open, but it is not in new window, it is in the same window.
I know I have to give the target = "_blank" somewhere. But In List region, I dont know where to add this.
Please help
George

Yes, you are right Arun. That is more elegant way of
doing it. Keep it up. thankx..
Btw, why do you hate javascripts? Can you imagine the
internet world without javascript (or ant scripting
language)?yep i agree... but i try my best to avoid scripts.. as i had been workin around some japanese technologies... and there are three major mobile market players there... who has their own content type and all those devices never support javascript..
more over i donno that... in all 3 yrs i have never used that ;-))

Blackberry ID linked device does not show up in Blackberry link

Hello all,
I am using a blackberry 10 (software version 10.1) that is registered to my blackberry ID account. Now i want to exchange files through the wireless network between my blackberry and my computer. My computer is running Blackberry Link 1.1.1.32.
When i open Blackberry Link and sign in to my blackberry ID account i expected that the phone would be added to the list of connected devices. However it gives me a error message that the account has no blackberry devices connected to it.
When i connect the phone on the USB port i can exchange information. However i would prefer to exchange date through WiFi and the cellular network.
This I have already tried:
I verified online that the mobile device is registered with that account.
I reinstalled bb link
I tried to logout/login on blackberry link
I have wiped the mobile device
I have pushed the button refresh devices several times over 2 hours (in blackberry link)
I have waited 4 hours.
My phone does show the laptop in the configuration screen 'blackbery link' connected devices. However i cannot choose the device in the file explorer to open it.
Does anyone have a clue what is happening here? It kinda looks like something is wrong with my blackberry ID.

I have factory reset the mobile.Created a new blackberry ID. Hooked up the new Blackberry ID with Link and the mobile and still Blackberry Link cannot find the Blackberry mobile when i click refresh devices in Link.
Where can I get some interactive support? The blackberry support website refers me to the telecom provider/vendor for support. However they plainly say "we dont know, contact blackberry".
Does anyone know who I contact blackberry and how (e-mail/phone) English support is ofc not an issue. The phone is purchaced from KPN the in Netherlands.

How do I add a link to the list of links under the "My Account Link"

Q) How do I add a link to the list of links under the "My Account Link"?
A) Edit any of your portlet web services and go to the "Advanced URL Settings" and then "User Configuration URL". If you type a path in this box, a link displays on the My Account page.
You need to restart your portal web server to see results immediately because the display page is cached.

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
AT&T, Sprint, and Verizon can block stolen phones/tablets
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
VUWER 1.5.4
Sneaky ******* 0.2.0
Undercover 4.7
LoJack for Laptops Premium Mac
STEM 2.1
MacPhoneHome 3.5

How to get the list of active devices in current wifi network?

Hi All,
I am going to a start a new Network based app. So please any one give me an idea on the below question.
How to get the list of active devices in current wifi network?

Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
strPassword = Request.getParameter("password").toLowerCase().trim();
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, MY_HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL,strUsername);
env.put(Context.SECURITY_CREDENTIALS, strPassword);
// enable tracing
env.put("com.sun.naming.ldap.trace.ber", System.err);
// Create the initial context
DirContext initCtx = new InitialDirContext(env);
// Get the target context
DirContext targetCtx = (DirContext)initCtx.lookup("");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the search on the target context
NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
javax.naming.directory.Attributes attrs;
NameClassPair item;
String[] attrIds = new String[]{"MemberOf"};
// For each answer found, get its "Groups" attribute
// If relative, resolve it relative to the target context
// If not relative, resolve it relative to the initial context
while (enum.hasMore()) {
item = (NameClassPair)enum.next();
Out.println(item);
attrs = targetCtx.getAttributes(item.getName(), attrIds);
Out.println(attrs + "<br>");
initCtx.close();
It returns all this string :
{memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
Thanks

How to refresh list of Airplay devices on the network?

I'm using a MBA running Mountain Lion. I work on two different networks throughout the day—at my office (where there are 8 Airplay devices, Apple TVs attached to flat panel displays) and at home (two Airplay devices).
The problem I'm running into is that when I arrive at home and want to connect Airplay to a device on my home network, the list of available devices doesn't update from those on my office network, which I'm no longer connected to. There doesn't seem to be any way I've found to refresh the list without having to do a full restart—which just seems wrong.
Is there a way to refresh the list of Airplay devices that show as options in the "AirPlay Mirroring" menu within Displays settings?

I have the same problem... ..
If my apple TV is turned off, and I wake up my MacBook Pro, obviously it's not going to detect my Apple TV.
So, lets say I decide I want to use Airplay. I go turn on my Apple TV, wait a few minutes.. I would hope that the Airplay Icon would just appear across the top of my screen, but it doesn't.
I tried running the airport utility, no luck.
I also have to restart my laptop for it to discover my Apple TV, if my apple TV isn't turned on when I start up my computer.

Unable to view list of added devices in LMS

Dear All ,
Iam working on Cisco LMS 3.2.1.Everything was working fine before but since last 2-3 days we are unable to view the list of added devices under device management tab.We are able to see the added groups only.Because of this issue we are unable to get the logs from the added devices.
Can anybody help in resolving this issue.....???
Regards ,
Divya A M

We tried the suggested steps and could successfully reset the Casuser Password.But couldnot perform unregistering and registering Apache service.We ended up getting the following errors.
1.)
C:\Documents and Settings\Administrator>pdreg -u Apache(no output)
2.)
E:\lms\MDC\Apache\bin>pdreg -r Apache -epdcmd: option requires an argument -- eERROR: no such command, or option error.Usage: pdcmd options...Where -b msg broadcast message to all daemons -k daemon kill daemon -K stop system -H start system -l list daemon registry -R daemon start daemon -i daemon show daemon status briefly -I show all daemons status briefly -s daemon show daemon status -S show all daemons status -G show daemon statistics -r daemon -e path -d depends -f arguments [-w ] [-n] [-q] [-t code] register daemon (-w -- timeout for ready file notification) (-n -- no autostart) (-q -- no INFO messages) (-t {0|p|n} -- expected transient exit code where 0 = expected exit code is 0 p = expected exit code is >=0 n = expected exit code is < 0 ) -u daemon [-q] unregister daemon (-q -- no INFO messages) -v show version number
3.)
E:\lms\MDC\Apache\bin>Apache.exe" -f "-d'Apache.exe" -f "-d' is not recognized as an internal or external command,operable program or batch file.
4.)
E:\lms\MDC>Apache -D SSL" -d TomcatMonitor(OS 10048)Only one usage of each socket address (protocol/network address/port)is normally permitted. : make_sock: could not bind to address 0.0.0.0:443no listening sockets available, shutting downUnable to open logs
Regards ,
Divya

Where is the List of approved iTunes applicatiions

Where is the list of Apple approved iTunes applications? There are many thousands but no list to conveniently download and browse or query. The browsing tools on iPhones, iPads, and my Mac's iTunes only show a few apps at a time and usually resets the search back to the beginning of each category after trying to view and go back to the list results.
The iPad Application is better than the one on the iPhone but usually breaks after a few hundred apps are displayed. It seems worse if you actually view an app. Sometimes I can return to where I left the list but most times it resets to page one application one. Surely the list of applications is not a secret? Or is it? The search tools miss apps that I know would be found in most search engines and sometimes I have to type in an exact name and there it is? Am I doing something wrong and are there some posts on this that I haven't found?

The iTunes App Store is the official Apple provided access portal for finding, purchasing and downloading apps/applications for iPhones, iPads, and other IOS devices. Apple only approves of apps for users which are provided by iTunes via the App Store.
Yes I meant the the "App store" where browsing, what many would call a search/query tool does not provide a way to see the entire list of either iPad/iPhone/iTouch applications. I have been using lists for many years with millions of entries and the way we access the lists of apps, only a very small number are ever shown in searches. Sometimes I only find an app through a search by typing in the exact name? This seems how Apple intends users choices to be influenced. If your type of app doesn't float on the top of the pool, it is pushed to the bottom so as to be out of the way. So I am looking for a list to be able to quickly search them on my own and put them into categories that make sense to my work flow.
Thanks for your reply.

I need some one's help making a scrolling list of links

I am working on a project where I need to make a list of
links that are text and can be manipulated like buttons and also
scroll mabey using the scroller from the components section in
Flash. Please help if you are able by responding to this post.
AN EXAMPLE OS WHAT I AM TRYING TO DO IS ON THE RIGHT SIDE OF
THE PAGE OF ( www.streamingfaith.com)
Thanks!

Great assignment (congratulations to your lecturer/professor/teacher, I'd give that 8 or 9 out of 10). I hope noone does it for you and spoils your fun!

Implement Ordered List using Links

hey guys! i need to write a program that implements an ordered list using links. My first step has always been to find examples and read them over for help. However, i am having a hard time finding this one and i was wondering is anyone had or knows where to find an example of a OrderedLinkList using LinearNodes. It would be great if it had these classes, but not necessary:
ListADT<T>
OrderedListADT<>
LinkedList<T>
OrderedLinkList<T>
LinearNode<E>
LinkedIterator<T>
Any help would be greatly appreciated and thanks in advance!
scottybh

This is clearly some kind of exercise, otherwise you'd just use LinkedList<T>. LinkedList is ordered (always returns the elements in the same order) and can be sorted by providing a Comparator<T> to Collections.sort().
I'd suggest you do the exercise or ask a more specific question.
Brian

Full list of Link-5 compatible keyboards

Hello Everyone,
I just purchased a Link-5 compatible HP mouse and I love it! I am very interested in getting a Link-5 compatible keyboard. I am VERY surprised at the fact that I have had no luck in finding a HP keyboard that is definitely Link-5 compatible. I would greatly appreciate your help in finding a compatible keyboard.
Steven P. Ulrick

Hey sorry J, I should have explained further my recent findings in my other post.
From all the reviews I found about Link-5...(example)
Link-5 is a 2.4GHz RF signal proprietary to HP and came out in May of 2011. It's similar to Logitech's Unifying Technology which came out about a year earlier.
The idea is that you only need one USB dongle to connect up to 5 peripherals which could be bought separately, unlike a keyboard/mouse combo using an RF signal that is tied only to that specific keyboard/mouse from the factory. It is not the same as Bluetooth either.
The one drawback about Link-5 is that it is not compatible with other peripherals that don't have the Link-5 technology. It wont work with a regular keyboard or mouse.
Also in HP's explanation of the product, they did not actually give a list of compatible products. See the comment at the bottom of the link here.
My assumption/guess is that Link-5 did not take off as expected and thus the variety of products is sparse.
I cannot find a "list" of Link-5 devices either. It also looks as though Logitech's Unifying product didn't take off so well either.
I did find a small list of items in B&H Photo though.
http://www.bhphotovideo.com/c/search?Ntt=HP+Link-5&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search=
Hope it helps. I'm leaving it up to the HP folks to comment further on future Link-5 products.

What is the default IP address of the HSE/H1 Linking Device?

I am evaluating an NI FBUS-HSE/H1 Linking Device. I am using a PC (not a DHCP server) to communicate to the FBUS-HSE/H1 but the PC cannot detect the device. When not assigned an IP address by a DHCP server, does the FBUS-HSE/H1 have a default IP address? If so, what is it? If not, is there a simple work-around?
Chris

Hi Chris / Sean,
I assume that you mean you got a freebee DHCP "server" & not "client", as most PCs are clients.
Any chance you could direct me to the "freebee" as I have tried a few free ones for this problem but
have had no luck.
Currently I am using an old ADSL modem that has a DHCP server, but it means another box stuck
on the network.
I am also hoping that NI will allow future versions of the LD to boot with a "default" address as most
other LDs now do (something like 10.0.0.1-254 range would be nice).
Sean - is this on the wish list for a future S/W upgrade. Just about everyone that has tried to get
one of these LDs running has come up against this "non-standard" arrangement.
Allen
[email protected]

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Where is my list of linked devices?

Similar Messages

Maybe you are looking for