Where oh where does it hide the captured footage?

Despite all manuals telling you to keep all files tidy and have a good filing system to make things easy to find, some people (i.e. me) tend to get a little excited on installation and completely miss where the captured files are stored.
I now cannot find them anywhere! Could you tell me where they are stored and how you change this?

Hi Becki,
you'll need to read more about *System Settings* and how to properly set your scratch disk paths.
It is all in the manual.
For the time being if you can at least see the clips in FCP browser then *control click* over the clip and choose *reveal in finder*. FCP will immediately locate the folder where your media is and you will be able to find the paths.
Also go to the website below to read some very useful tutorials:
http://www.kenstone.net/fcphomepage/fcp_homepageindex.html
G.

Similar Messages

Hide Bookmark does not hide the bookmark

Hide Bookmark does not hide the bookmark
I had a swf but the discussion would not allow it

Click the Bookmarks icon in the Safari menu bar to hide or show Bookmarks.

Audio ducking : is there a way to hide the original footage's sound? Its grey-ed out.

My original footage's audio needs to be removed. I would love to just take it out but if I need to cover it up with ducking thats ok too. How do I hide the original footage's sound? I turned each clip to 0% but its not working.

Tim,
You might try including the IFERROR function in your expression. This will suppress the error message.
Jerry

Where does NI hide the full list of bug fixes? and why is it hidden from users?

So I get an enticing email begging me to try the august 2009 release of LabVIEW. Ok. I'm twitching with anticipation. I'd like to know if several specific bugs are fixed in a new release of a specific module, however. Otherwise I'd prefer to install it some other time when I'm not busy writing dlls to compensate for the bugs that I hope are now fixed. I've been clicking in circles on the NI website trying to find complete information regarding changes and as is entirely far too typical of NI, I only have access to an anemic, watered down version of what should be proper documentation.
"LabVIEW Readme—Use this file to learn
important last-minute information about LabVIEW, including installation
and upgrade issues, compatibility issues, a partial list of bugs fixed
in the current version of LabVIEW... bla bla bla"
Where is the full list of bug fixes? I don't care if it isn't spellchecked or if it's sloppy; I just want the information. The readme you provide for the specific module I'm interested in is ridiculously small. I know darned well you must have changed more than what is listed. So what secret vault do I have to burgle to find the full list of bug fixes? Am I just missing an obvious hyperlink?
- mushroomed
Message Edited by Root Canal on 08-11-2009 11:29 AM
global variables make robots angry

Root Canal wrote:
Where is the full list of bug fixes? ...
They are locked-up in the Ivory Tower.
I have been a LabVIEW Champion for about four years and even after signing NDA's I still can't see the full list.
Seruously, the full list includes probably millions of bugs that NI finds internally before you and I ever see it.
The best way to handle your situation is to track the CAR's for your bugs. You can call NI support with the CAR number and they can tell you if the bug was fixed and in which version you will find the fix.
If it has not been fixed you can contact you rlocal NI rep and ask them to look into it for you. They may be able to tell you in which release the fix is scheduled and bump up the priority of the fix if you make a good arguement.
Just trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Why does Verizon hide the fact on their network an iPhone cannot deliver simultaneous voice and data

For me the breaking point was when the local Corporate Store clerk lied to be about their return policy. He even documented the information he gave me and that didn't matter to management or corporate. I made a decision to switch to the iPhone and was specifically told I had 30 days to evaluate weather I could make the transition from android to iOS. If I couldn’t for any reason, I could just return the phone and pay the $35 restocking fee and we were then free to choose from one of the many androids.
After weeks of challenges and countless hours spent with first tier then second tier then a product specialist we all came to the documented conclusion that the iPhone, on Verizons network could not support data and voice at the same time... Every other smart phone on Verizons network could and always has... the IPhone on ATT's network can support both voice and data at once... but Not On Verizons network...
Each tech I spoke with seemed shocked and in utter disbelief that this could be so. They blamed ATT for harboring special privileges hold over from their exclusive relationship with Apple. Which is not true. Then they blamed Apple for delivering handicapped phones to Verizon on purpose. Well, with an Apple Product Manager on the phone listening in on a Verizon Tech giving me this among other excuses why I could not be on the phone and using google at the same time, the Apple Rep finally jumped in and very politely cleared up any miss information the Verizon tier 2 support rep was fumbling out.
So after I had done everything in my power to make the phone work the way I had understood it would. And had every reason to believe it would. As did every Verizon rep I spoke with at first until they did a little research and found Verizon had deliberately been hiding this fact from customers. So I conceded to go back to the Android world for now and let Verizon sort out this glaring deficit hopefully in the near future… Though every support rep concluded that there was no mention of this being fixed or even a problem so not to hold my breath…
I couldn’t have been more shocked or infuriated when I went to exchange the “still in the plastic mint condition iPhone” I was told I had to have brought it back in the first 14 days… I pleaded and argued, even directed the manager to the notes entered in verizon’s own support documentation regarding my case and he said “well I see here where you were told that but that rep was wrong”. That may be so but I based my entire testing and evaluation timeline based on the dates the rep clearly and admittedly told me! The store manager said there was nothing he could do.
Now I mentioned I’m a Network Solutions Provider and being able to be on the phone doing a support call and using my cellular internet at the same time are an absolute must for me to be able to preform my job. Every Verizon smart phone I have ever owned had been able to do this. Now I am told I am STUCK in a two year contract with an inadequate device that I cannot exchange and therefore functionally useless to me.
Verizon corporate nor the store manager cared one bit about my position. They stood behind a little register tape that by signing my credit card receipt I now owed them two more years of my life and now they could care less weather I had a functioning solution or that I had been a loyal customer for over 17 years. Or that I had brought entire small business offices to them for cell services. Just stood there and held a copy of my receipt and said, well you signed it so here is what it will cost ya to get out of it!
He got out a calculator and started running numbers for what I would have to pay to fix this situation… What I would have to pay to even leave Verizon and go get cell service from someone else. It felt dirty … seedy… like being at some 3rd world used car lot where some shyster had gotten someone wrapped up in a contract and now was going to squeeze the life out of a customer even though they couldn’t’ even deliver the service they implied you were going to get in the first place.
In 30 years of being a small business owner I have never encountered an organization that had less integrity or more unscrupulous business practices…
I see post after post of Verizon Customer Support reps answering threads… funny I haven’t found one where a user honestly thanks the rep for actually helping them out……. Please Verizon Customer Support, show me you actually can look at a situation and see an equitable solution where a Customer and the Share Holders can both win…..

Well if this information was as ubiquitous on the web as you suggest, I am puzzled why it took three weeks of troubleshooting with many levels of Verizon support before we collectively concluded this was the situation...
Regarding Reading what I sign... Thanks for that advice though in this situation I was handed a stylus and told to sign a Signature Pad at the check out counter... ONLY AFTER I signed (for the purchase only) was I presented with this return policy conveniently nested in a 3 foot long reciept consisting of paragraphs of Helvitica 6 type set info... I made the assumption that the sales person could correctly answer a direct question regarding the policy I inadvertently signed for when authorizing the credit card charge... Even more concerning is that when by my actions and constant communications with Verizon, my intent was clearly based on the information I had gotten from the sales rep. and if I was given misinformation it would seem Verizon could show some integrity and support the situation with some equitable solution rather than hiding behind contracts collected from sales staff who do not tell customers the truth.....
>> Minor edit <<
Message was edited by: Verizon Moderator

IMovie 11 does not allow the capture of a still from video

I am really ticked off. I just upgraded to iMovie 11 and couldn't capture a still from my video. I called support to see what I needed to do and was told that THIS FEATURE IS NOT ON iMovie 11.
ARE YOU KIDDING ME!!!!
How could such a basic feature be eliminated? Of course now I can make movie trailers, a cool feature, but...

Oh yes, as AppleMan1958 wrote, it IS a good workaraound to get jpg (or tiff...) stills from Imovie 11: If you make freeze frames and export the project via Quicktime with the option "Image sequence", you can choose in the options if you want jpg's or tiff's or...
If you set the duration of the freeze frames to 0.1 s before the export (you can choose all and set the duration for all at the same time), you only get two or three stills by freeze frame.
v.

Where does iMovie save the movie file?

I have imported my video and I want to get to the folder without opening iMovie. Which folder does iMovie put the raw footage into?
Thanks,
Brian

Brian,
You also need to know that when you see your iMovie project inside the HD Movie folder, you can't simply double-click the project icon and see all of your assets. You need to hold the Apple button while single-clicking on the icon, then choose "Show Assets" to see your media, the QT reference movie, etc.

Does one of the Lync SQL databases store the active directory username or SID of the person who made a call ?

I am trying to write a report that uses data from Lync (2010), Active directory (AD) and other databases.
I need to match data from Lync with records in active directory.
When you make/recieve a call, the session details has a userid column - a foreign key to the users table, which has the UserURI - the users emails adddress or telephone number.
However, trying to mach the data, I have noticed that someones email address can change so that what is in active directory does not match that used as the SIPaddress in Lync.
I need a field that matches in Active directory and Lync to be able to link a users call records with their active directroy records.
I was wondering how Lync decides which Lync user you are when it auto logins you in.
Does it do it on the basis of your phone number, AD username or something else ?
If so , where in Lync does it store the mapping from whatever it uses to your Lync userid ?
Greg

The msrtcsip-primaryuseraddress attribute in AD is where the users SIP address is stored.
This can change still, but generally that should not be very often except maybe a name change or domain name change.
Almost everything in Lync is based on the SIP address. In CDR's case, it is just recording SIP messages as they pass through the front end; it has no visibility into the actual AD account that sent it.
If you will need to match user SIP addresses back to live AD accounts, even after a SIP address change, then I would recommend setting up a custom AD attribute to store their SIP account history and have a policy to update that attribute each time someone's
SIP address gets changed.

How do I hide the address bar when fullscreening "popup" windows?

Sky TV's video player has a bad fullscreen implementation - you can make the player go true fullscreen but it reverts when it loses focus, so I can't multitask on my two monitors.
The best workaround I've found is to use their "pop-out" player, which opens a new "popup"-style window (locked address bar, no search bar etc.) and I can then fullscreen the window itself (rather than the player). This allows me to hide
- the window outline
- the window title bar
- the Windows start menu
and it stays fullscreened when it loses focus.
However, this does not hide the window address bar. On a normal Firefox fullscreened window this slides out of view after a short time; on the locked "popup" style window it does not.
On the offchance that treating "popup" windows differently is a deliberate Firefox security policy... can I disable it?

You only need to select the pop-up window after having opened the Browser Console or open the console before opening the pop-up to make that window the MostRecentWindow.

Add a feature to hide the on-screen soft menu buttons in Kitkat & Lollipop

In Kitkat & Lollipop when a file is opened, it goes full screen & hides the notification bar. But it does not hide the on-screen buttons. It should do that as the screen space is rare and we need every bit of screen space available to read the small text of documents. Also make it optional whether to go full screen or not.
Thanks for consideration.

Thanks for your request. We have made a note of the same and shall try to incorporate it soon.
Thanks,
Adobe Reader Team

OneStep: Location of Captured Footage?

Can anyone tell me where the captured footage is stored when I use OneStep? Is it possible to get that footage and use it inside iMovie so I don't have to capture again?
I have not found a definitive answer on where it goes when captured!

I want to access the temporary files created by iDVD in this folder. However, finder does not show it. I used "Delete Encoded Assets" in iDVD. But, I know that there are still temporary files occupaying at least 8-9 GB space. How can I delete all temporary files of OneStep?
OK, I found it. Its in/tmp on your boot drive (or
whichever partition /tmp is mounted on).
iBook G4 Mac OS X (10.3.9)

Captured footage not accessable in FCPro but is in Quicktime

This has happened twice now so I know its not just a fluke. A captured video was unplayable - unaccessible even - inside of FCPro 7. It acts like its 1 frame long rather than 27 minutes.
But when I checked the file in scratch disk / captured / proj and it opened in Quicktime and played just fine. Absolutely nothing wrong with it. Except that when I reimported the raw into FCPro, same result - unplayable.
So I used quicktime to export a copy that I was then able to import into FCPro and worked perfectly. But WHY wasn't the captured footage available ? I will not re-render all my raw footage every time I capture something. That's just crazy talk!

Sorry for leaving that out. Its a Sony DVCAM DSR-390, captured at standard DVCAM 48Khz. Yes, it was captured by Final Cut Pro. I've never had a problem doing this before.

HELP!!! Captured footage "garbled"...

I'm in Gr. 12 using premiere to edit a movie project. I've been using premiere for about 6 or 7 years, since my brother introduced me to it. Over that time, I've learned the ins and outs really well. With such little time left to edit, I'm reluctanct to try to learn another editor. Every time I have a new video project, there seems to be a new Premiere out so I just get the new trial. Did this with CS4. Here's my problem:
I have a new camera; a Sony HandyCam HDR-HC3. I understand Adobe doesn't let you capture HDV, unless you pay for the whole thing (which I think is a real shame for poor ameteur editors like me). When I capture the footage in the standard SD, the picture acts all weird and becomes like deinterlaced or something. Audio is fine. I find a work-around about six months ago with CS3 but I don't remember it... . Video plays fine in VLC player. Anyone work-arounds?
Adobe capture the footage as .avi s.'
Update: This is driving me nuts. The videos play in FLV, WMP, and QT. Even adobe media player. WTH is going on?
Update 2: I tried capturing footage from a normal DV tape with this camera and the same damn thing happened. So it wasn't because I just shot it with an HDV tape.
Update 3: Windows FREAKING Movie Maker plays the captured footage fine.
Update 4: I've added an image of Gspot and of the garbled thing its doing.

The academic versions are very, very cheap. I wish that I could qualify for these. Sometimes I think of taking classes in an approved college, just to get these, but then I make $ with them (not forbidden, but certainly outside of the spirit), so I do not feel right doing so. Even when I did take classes, I only used my "discount" for books - never the software.
One bit of advice would be to completely low-level re-format your HDD and totally reinstall everything after using a trial, before reinstalling the full-paid version. I also highly recommend buying the full-paid version and installing it on a clean system. Too many trials and your system is likely filled with all sorts of detritus. Not a good thing at all, and it might take weeks of hunting around to remove it all. If you've had more than one trial installed, you are probably working on a machine that is about ready to systemically crash - this could well be a hard-crash, and nothing but a total rebuild will get it going again. Be very careful and do not commit important Projects to it.
Back to the lack of MPEG support in the trial: Your purpose is exactly why Adobe does not pay the licensing fee to MainConcept for the trials. Too many people abuse the trials, and this would cost Adobe $. Then, Jim, Eddie, I, and others would have to pay more for the software. That would make us all poorer for it. I'm not keen on supporting other folk with my work and efforts, regardless of what the tone in the US might be right now.
To put it bluntly, you're walking on egg shells here, as we all pay full-fare for our software.
Hunt

CAPTURING FOOTAGE FILMED IN LP MODE

I was unfortunately given several MiniDV tapes and found that the person filming, filmed it in LP mode. When I try to capture it in FCP, it keeps stopping after 15 - 20 secs. Is there any resolution to this? Is that a capture setting I can reconfigure to accept the LP footage? Thanks

What do you mean by "stopping"?
Does FCP abort the capture is that what you mean?
If you try and play the tape on your ceck without FCP does it "stop" then too?
The tape you have may have problems playing on your deck if it came from another camera.

Deleted captured footage so i think can no longer edit my movies

Hi, so i deleted the captured video files because they take up a heck of a lot of space. Now, if i go back into final cut, none of the clips on the time line can work because the original files were deleted. I need to do stuff like put a title and credits, and adjust the music. Will i be able to do that since i deleted those original captured files, or am i stuck with the version i burned before deleting the captured footage?

ok so i went into the project with all the files offline, i connected the camera with the right tape, i went to capture, clicked Project when it was all ready and i hit continue, the tape just kept rewinding, little by little to the beginning (the stuff i need is in the middle, and i had it at about the right place). Im looking at the exact stuff i need on my cam, but its just not doing it.... at one point i got it to capture one section of the right stuff, but it just created a new captured clip, i dont know how to reconnect it to the stuff in the timeline... i went to a clip that used part of that, and clicked reconnect media, but when i looked it up and chose it, it wouldnt work

Where oh where does it hide the captured footage?

Similar Messages

Maybe you are looking for