Where's the next issue of LOST?

It's been plenty of time, like over a week already.
Last show was last night and it's been more than 24 hours EST.
Anyone have a clue what's going on? Disney scared of NBC?
Thanks...

Lost has been a repeat for the past 2 weeks, that's why.

Similar Messages

The next issue of a magazine subscription I purchased through imagazine?

How do i the next issue of a magazine subscription I purchased through imagazine?

You can try but the review process for a single edition app is far more
stringent as far as content than a multi folio app.
Converting it to a multi folio newsstand app would probably be easier to
accomplish by just creating a new app.

Where are the next shipments of iPhone 3G's?

I figured maybe someone here might be able to provide me some insight to the question; Where are all of (new shipments of) the iPhone 3G's?
I believed Apple would insured shipments were made to all their stores so that Tuesday there would have been more, and Wednesday, and so on until sales started to drop off where daily shipments were no longer necessary. Much to my disbelief, Monday and Tuesday shows no new shipments made to apparently anywhere in VA, MD, NJ, PA, OH, IA, IN, TN, KY, DE, CT, MA, NH, RI, or NY. There is a store here and a store there in some of those 15 states that shows one of them in stock, but essentially, they are gone. If you look at California and New York where the flagship stores are, they have some (probably a large quantity) of each of the 3 choices of the iPhone 3G.
Monday may have been an 'Out of Stock' day because phones couldn't be shipped out on Sunday but, what I don't understand is how on a Tuesday there are extremely few, if any to be found in the states I mentioned. What was the logic used when Apple decided that only after 9PM can you check the availability of the phone for the next day and not have some sort of 'real-time' tracking. Does this mean that if a store gets a shipment at 2PM this afternoon and you happen to be in the store (again, the store in my area won't answer their phone) you can purchase one, or are those phones only available for the next day? Even AT&T is providing 'real-time' (or at least semi-real-time) availabilty for the customer's that chose to go the Direct Fulfillment route.
The local Apple store doesn't answer the phone anymore (even AT&T stores are answering, they just start off with '...we don't have iPhone's...'). I understand they are busy but as a minimum level of customer service, someone should always be stationed to answer the phone for customer's. When I went into the store I was greated with a blank stare while I asked about availability then politely advised; '...no, sorry, we don't have any right now and we don't know when we're getting anymore, but check the web site tonight...'.
The AT&T stores (Apple's premiere partner) can't even get any to sell (other than using Direct Fulfillment), Apple stores now answering their phones, and now the online availability showing no phones in stock 5 days after release within a 15 state area. I think that demands that questions be asked to individuals at Apple's corporate level that determined the marketing and supply strategies for a major product release like this.
I congratulate Apple on the milestone achievement of selling 1 million iPhone 3G's in a 3 day period, but I find it difficult to believe that a global leader like Apple would have failed to anticipate this kind of demand and the response to consumers to be '...we don't have anymore...' or '...we have a shortage problem...'. The question again; Where are the new iPhone 3G's, and when will they be available for us to purchase again? If the statement that stores are getting shipments daily is true...

Thanks Nathan, and that's where I have been checking at since Friday evening. IMO though, it's only 50% effective simply because it isn't real time, you can only check it for the 11 - 12 hours a location is closed. If a location receives stock in at 11am today, well you wouldn't know that unless you go into the store every day and ask (and most likely you're not going to get an answer from the store reps other than what I noted above) or after 9PM. A leader in the computer industry such as Apple should be more than capable to provide real-time tracking of produc availability (in fact, they do it all the time for their online store).
Right now, it's not so much that I can't tell whether a store has stock or not but more of why isn't the phone in stock in most of 15 states on the Tuesday after the launch weekend? Is Apple sold out? Are the stores holding them until this weekend for another 'spectacle' event? Why don't the stores answer their phones to advise customers during the day if the shipment 'they receive most days' is there and you can stop in and pick one up?
Bottom line, my opinion is that the management of the release, distribution and sales of this particular product (at least where I'm at) is lacking the minimum level of customer service that should be the standard in the industry, let alone for Apple.

Wi Fi Dongle 600 Install 'Where's the NEXT box'?

Purchased a BT600 dongle yesterday. I inserted the DVD and followed the instructions- but when I was prompted to hit the NEXT button, I had a problem, becasue there wasn't one!
I have seen another post on this subject but it didn't really help much, I am not particularly computer literate so I need an easy solution- prefably how to get the NEXT button to display.
Spoke to PC World and BT (at length) but neither had a solution.
Given the number of these items being sold I am surprised there is no solution on the internet, and I was hoping someone on the forum may be able to help. BT seem to think its a faullt in the DVD installation software. For the record I am running Vista on a PC.
Thanks
Alan

Well I don't know the specifics of this installation, but in some installations the buttons will be dependent on carrying out some action on the screen - for example, check the box to accept the terms and conditions, or select a directory for files, or soemthing like that, and until you carry out the action you can't move to the next screen.
That would be the first thing I'd check.
If that doesn't help, you can download a clean copy of the install software here:
http://bt.custhelp.com/app/answers/detail/a_id/45467/~/dual-band-wi-fi-dongle-600-windows-software

Signed up for what I thought was one issue of a publication on an App. However, now it is automatically charging me weekly to receive the next issues. How do I cancel this app?

I purchased what I thought was on issue of a publication in the in the App Store. Now weekly, my account is charged for the weekly issue. How do I cancel this app and further charges to my account? Andreafromin

If you haven't already, try restarting the iPhone, it could just be that the store is stuck. Shutting down and starting back up tends to resolve these sorts of issues.

Mouse FLIES out of no where on the next slide!!!!

So if one of my slides has a little video camera next to it.
on the next slide the Mouse flies out of the top right of the screen!!!

To FIX this.
Show mouse (an additional mouse) on the previous (video) slide.
Move this mouse to the appropriate area it should be for the next slide.
HIDE this mouse on this previous (video) slide..
--Makes no sense to me.. my wonder colleague discovered this trick!!!!

Where is the device list for lost or stolen Ipads?

Where can I find a list of serial numbers associated with my Apple ID?

I do not know of the existence of such a list. Did you not make a note of your serial numbers? And have you now thrown the boxes and receipts away?

Where is the forward button please, lost it somewhere during the last upgrade

I wanted to forward on a short pps show I received to some friends, can't find it. I've looked several times for it, but to no avail, I guess it must be somewhere, but......

There is a Forward button on the header bar of the Message Pane. To turn that on press F8.

Where did the "Next/Previous" buttons in the iTunes "Get Info" window go?

Can I no longer edit items quickly and efficiently? These buttons disappeared in iTunes 11!

It is still there in my version. Are you sure you are not selecting a whole album?

The next level manager is unable to view or access appraisal forms for all

I am facing an issue where in the next level manager is not able to see the appraisal docs of employees.
Follwing is the link that we found on SDN related to the same issue-
Next higher level manager should see the appraisal docs of the employees
During the PM testing, an issue was discovered with the existing logic of the Default Next Level Manager BADI.
When a manager manually reports to a NL managers organization unit, the next level manager is unable to view or access appraisal forms for all the employees who report to the manager.
For example,
NL Manager/Cheif: Susan
Manager/Chief: John
Employees: Mary and Matt
If Johns position (manager/chief) has a A 999 Reports to dotted line relationship to Susans organization unit (NL Manager), then Susan is unable to access, approve or reject the appraisal forms for Mary and Matt (Johns direct reports).
The relationship type is A 999 Reports to dotted line
Type of related object O (Organizational Unit)
We need to update the BADI in order for the next level manager to be able to access appraisal forms as described in the example above.
BADI implementation Name : Z_HRHAP00_DOC_DEF_DO
Method - IF_EX_HRHAP00_DOC_DEF_DO~DEFAULT_OTHERS
Now we are facing the following issue-
After identification of the employees who report to the managers organizational unit using the A 003 Belongs to relationship we are not sure how to pass these employees information from BADI to appraisal form, so that the previously identified Next Level Manager will be able to access, accept and reject appraisal forms for these employees.
For further details please refer the thread. I was not able to understand how this can be achieved.
Can anyone please mention in brief how I should be able to do this. I am new to this and I would appreciate any help .
Regards,
Satish.

There are no Function Modules to my knowledge. Pls try the transaction S_AHR_61016530 which would display the User's approvers as per hierarchy. This would bring datas from the HR tables. If this helps pls award points.

I'm having an issue with songs cutting off before finishing and jumping to the next one. Even on my old ipod where there were never any problems before. They play fine on my computer? how can I fix this without spending a fortune replacing all these songs

I got this new Ipod for christmas,& I started importing songs before it was fully charged. I thought thast caused the problem till I added new songs to the old one. Then it started doing the same thing. The old one never had this problem. Even one of the new songs I just bought stops 15 seconds in then jumps to the next song. I can't afford to replace them all.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

CD-ROM drive letter changed to the next available letter after an issue with the Storage appliance.

Server platform:Windows server 2008 R2 Enterprise.
Last time we experienced an issue with the storage device we are using to attach a disk to our server 2008 (virtual). This storage device is also providing storage to the ESX where the server 2008 is hosted.
The drive configuration in the server was:
System C:\
Tools D:\
Apps E:\
CD-ROM F:\
Some hours after the storage appliance issue, we realized the Application on the server was not working and then we restarted the server. After restarting the server we went to the file explorer and realized that the Apps volume had the drive letter F and
the CD-ROM had the E letter assigned.
I assume windows lost the Apps disk due to the SAN disconnection. Maybe the CD-ROM was also disconnected and when the Storage appliance was connected again the CD-ROM acquire the next drive letter it found, which was the letter E:. Then the Apps disk was
also discovered by Windows and it assigned the next available letter, F:.
I was looking for some MS knowledge base to see how Windows 2008 server assigns the letter to the CD-ROM and how we can permanently fix the letter assigned to the disks and the CD-ROM so that this issue won't happen again. As you know many applications use
the path including the drive letter.
I thought that when you set a CD-ROM drive letter, it remains forever as is, and that in case of a SAN disconnection Windows assigns the same letter the drive had before the disconnection.
Please advice if you have some documentation about this. And let me know if you have any thoughts about what really happened to prevent this in the future.
Thank you guys!!

Hi, for the APP's drive it could had been assigned a new letter if the system did seen it as a new disk/partition.
The partition was on your esx's LUN on the SAN ? (not an iSCSI connection from inside a VM?)
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

HT202157 wonder where is the youtube Icon since I updated the new version and it all lost, only compeer sharing and setting that's all

I updated apple TV
and then all the youtube and live radio is lost
wonder where I can set up and add it ?
please advise
Thank you

Mini Man, I'm glad to read you found a solution to your issue, but I don't know if your solution is going to be mine as well.
For starters, I do not have the new Apple TV - at least, not yet. I have ordered one, but it will not be delivered until some time next week (sneering glance at Steve & Co. for abandoning that platform rather than making it AirPlay compatible).
But that is not really my issue: my issue is that my two Airport Express units do NOT show up in the iPhone, though the DO show up on my iPad. This tells me they have been properly configured (both units have names, and are connected to the house network), so there must still be something missing from the equation.
And, judging from the response of a few others who have chimed in here, I think it's save to say that the experience is not altogether uncommon.
I'm surprised nobody has come back with a more direct solution to the common issue. I may have to call AppleCare someday this week...
--PS

Top 15 Issues/Fixes Needed in the next Premiere Pro release/update (CS6.5 or CS7)

I’m excited for what’s coming next in Premiere Pro CS6.5 or CS7 (whichever update is next). As a former FCP7 user myself, Premiere CS6 was a quick and necessary switch (especially after changing the main keyboard shortcuts back to what I was used to). I’ve since gone back to FCP7 on occasion for certain things and I can tell you that I’m so glad I’ve switched. For all the headaches and serious errors that I still get daily/weekly with Premiere Pro CS6, it’s still definitely a big step up. I'm encouraged by staff members like Mitch W. that have expressed confidence that many of these issues will be resolved in the next release. Here is my personal list of “Top 15 issues/fixes” needed in the current Premiere Pro CS6…
(Adobe STAFF...feel free to print this out and hand it to the engineers responsible for making changes )
1) The infamous multicam FLAW. Needing no introduction…when you are editing your video in the multicam window and you hit pause or stop Premiere has decided that’s a great time to make a cut on your timeline and also switch angles back to the original angle whether you like it or not. You cannot stop ever while editing multicam without Premiere making these unwanted cuts and angle changes. Awful. Multicam in PPro is otherwise pretty nice, but this issue is terribly counter-productive especially when you are editing longer complex multicam sequences. Imagine if every time you hit pause or stop in the regular timeline it made a cut there and switched clips. Ugh. You get my point.
2) The audio meters/levels do not work while in the multicam window. A staff member in the forums (I think it was you) said this was a bug. Hope it will get fixed. The audio levels work in every other window and its essential to be able to keep an eye on the levels while editing multicam.
3) Ticktime.cpp-207 error. Ugh. What a nightmare. I have confidence that it will be fixed soon. Mitch W. from the forums is my new hero for taking on this error. How to replicate it?…simply have 6 (or 7) or more clips with the warp stabilizer effect added on the same timeline as a nested multicam clip and you get this error upon reopening your project. The more warp stabilizers you use, the more times you’ll have to hit “continue” to get through the error before you can open your project or export it to AME. I deal with this every single day because all my projects use these two elements. Most of my projects I have to hit “continue” on the error message upwards of 350-450 times to open my projects. Gets old fast.
4) Icon View order control. When you display all your clips in icon view instead of a list view (In the project window), there is no metadata to allow you to put the clips in order somehow (or at least maintain the order that you have in the list). There are roundabout workarounds, but c’mon.
5) Warp Stabilizer fixes…it is an AMAZING tool (far, far, far better than smoothcam in FCP7) BUT…it has it’s issues. Since I use hundreds of times/week (no exaggeration) I know it’s functions/flaws really well. The issues with Warp Stabilizer:
a) #3 above
b) Toggle OFF the effect after it’s applied and then hit Analyze again and PPro crashes. (easy to avoid but annoying bug)
c) If a clip is in the middle of stabilizing (not just analyzing…but the final step labeled “analyzing”) when Auto-save comes up…most of the time PPro freezes and crashes.
d) The DEFAULT “method” (in the settings for Warp Stabilizer) should NOT be “Subspace Warp”…it should be “Position, Scale, Rotation”. Why? It’s FAAAAARRRR better and more efficient. 95 out of 100 times it causes MUCH less “wobble” in the final stabilized clips AND most importantly 95 out of 100 times it scales the video less. Way better method.
6) The ability to open multiple projects simultaneously. As simple as FCP7 had it…or even better…as cool and efficient as FCPX does it would be nice.
7) The ability to mark a clip and not just a point on a timeline (because if you move the clip, the marker doesn’t go with it). I know you can use “Clip Marker” but it's very limiting, can't be moved, can't add notes, can't advance to the next marker (as far as I know). Also a marker list like FCPX has would be nice so you can see your markers all in a list at a glance and adjust them as needed.
8) Ability to select a clip in the Project window and find out where it’s used in the timeline. I LOVE how you can do the reverse and take a clip in the timeline and “Reveal in Project Window” but it would really help to go the other way around. Dealing with several hundred clips for every project I’ve missed this feature from time to time (FCPX handles this really well).
9) Add a through-edit indicator in timeline and “re-join clips” option. If you cut a clip but keep both clips together it’s just one continuous clip. But I really hope Premiere adds the not only an indicator of some sort (like FCP7′s way of having two small red triangles facing each other on that cut) so you know it’s one continuous clip BUT ALSO the ability to right-click and “re-join” the two clips into one.
10) When clip is double-clicked in timeline, CTI position in source viewer should match location in timeline. This one is pretty annoying and a fix would be incredibly helpful. The way it is now is very counter-productive. Definitely hope this gets fixed ASAP.
11) Better border controls for images/videos. Can’t do much with images right now in PPro. At least allow to customize the color and size/strength of it’s borders and shadows.
12) Better support for Mac/Apple's top end computers/GPU's. I'm still surprised that 2011 top of the line iMac cards (AMD 6970M) that have 2gb of ram are not supported. I’m sure/I hope 2012 iMac’s will be supported with their new Nvidia GPU’s…but I’ll hold out hope that the top iMac (up until 3 months ago) is supported at least at it’s full power. All around better Mac support would be great considering the wave of new users coming over from FCP.
13) Opacity/Transparency issues with EXPORTED videos with Cross Dissolves, etc. For some odd reason videos exported from Premiere CS6 have issues with cross dissolves or minor transparency. I’ll try to explain…in the program window of PPro CS6 cross dissolves look fine. Also, if you take a clip and stack it on top of another clip and put the top clip at say 99% opacity instead of 100 it looks like it should in PPro. But, if you export the clips you’ll quickly see that there are issues. It’s almost like the exported videos dissolve from 5 to 95. They skip the subtle beginning (0-5%) and subtle end (95-100%) of any fade. A clip in PPro as described above that is on top of another but set at 99% will look more like 90-95% in the exported file ESPECIALLY if the two clips are contrasting (eg. top layer dark, bottom layer with bright elements). It’s like the opposit of ease-in/ease-out. I have to ease-in/ease-out of every dissolve to avoid this issue…and even then, it’s not THAT much of an “ease” as one would hope. Another user in a forum once posted a video that shows how abruptly exported videos end their transparency changes…see: THIS SAMPLE VIDEO Perhaps this is a GPU/processing issue with AME vs. Premiere Pro but whatever it is, it should be fixed so videos you export look like the videos you edited!
14) Better control in Creative Cloud over which devices are “activated/deactivated” We have 3 computers and it would be nice if one could log in to their Creative Cloud account and see a list of which devices they have and just toggle on/off which one’s are activated/deactivated. This is especially helpful when you are mobile and forget to deactivate one of your two home/office devices so you’re stuck now until you get back to the home/office to deactivate it. This is not a Premiere thing, but just a general wish.
15) Ability to sync multicam clips automatically using the audio. Plural eyes apparently does this well. Would be nice to have it built into Premiere like FCPX does. Select all the shots you want to sync, One button click, wait a few seconds, done.
That’s my top 15. Everything else is awesome in my opinion for what I do 10 hours a day 6-7 days a week. I’ve included bug reports/feature requests for all of these at one point but if you are someone else reading this go to the following link and ask for these issues to be fixed: FEATURE REQUEST/BUG REPORT
I wish Adobe did smaller updates more often. Because even if they were smaller updates, we’d at least know you are working on fixing some of these issues that have plagued this NLE for years. Holding off fixes for one or two big “updates” every year is tough to deal with in a world of the ever updating apps we live and play with daily on our phones. I realize Premiere is a much larger scale and far more professional than a phone app, but hopefully you get my point. Here’s to hoping the next release (NAB 2013?) resolves all my top 15 issues. Here’s to hoping that these issues will be resolved sooner than later so I can stop raising hell in various forums. I’m honestly ready to start praising and defending Premiere Pro instead of griping about it’s bugs and flaws. It’s a fantastic program “on the way” to being the best. I hope.

Nice list, however it does seem a little bit like you may be hoping that Adobe provides the Final Cut 8 package that Apple never delivered on. Having edited primarily with P-Pro for the last decade, I hope Adobe focuses more on getting the next release to run as smooth as CS5x does, strangling and crucifying all the codec and playback bugs that arose in CS6. To me, it appeared that too many of the changes in CS6 were semantic or cosmetic, meant to give a FCP user more familiarity. Why change the name of an edit function from "overlay" to "overwrite" after 15 years? Because it enhances the product, or because that is what Apple called the function in FCP? If Adobe renames the Program Monitor to the "Canvas" with the next release, I think that I might be sick. There were nice additions to the Creative Suite as a whole, but I hope the next Premiere release reverses some missteps made in CS6, and focuses more on stability and enhanced functionality. I also really hope that they have an open ear towards criticism; Apple did not and their users ended up with FCP-X
It saddens me that the fixes I want most in a future release were purposeful changes between CS5x and CS6x.
1) Provide the options for transport controls in the source and program monitors. All of the users at my office hate that the jog and shuttle were removed in CS6. JKL was an option prior to CS6 and if we liked it we would have used it. I keep reading the justification that this change was meant to save space and streamline the UI. I can't express cordially how much this bothers me to look at the empty wasted space in my CS6 UI where the transport controls should be. The experiment has gone on long enough.
2) Restore the 3 Way Color Corrector to its previous functionality. The 3 way color corrector has been effectively neutered in CS6. Where in CS5x and earlier releases one could separately target the input/output levels of Highlights, Midtones, and Shadows, CS6 has only a master input/output level control. Why is less control better? Is it a 3-Way Color Corrector or a 1-Way Color Corrector?
3) Restore Clip and Timeline markers to their previous functionality. I don't even.... I can't. A user shouldn't have to do work arounds to create a modicum of functionality. This again was an attribute that wasn't broken in earlier releases.
4) Simplify the the task of pasting media into a targeted track. As it is now, pasted items will always go to the lowest activated track instead of the targeted track.
Lastly I would like the Adobe Premiere teams to consider what an amazing accomplishment Premiere CS5x was. Upon CS5's release, a good portion of competitor's workflows became obsolete. CS5.5 refined, stabilized, and expanded functionality.
CS6 changed the UI around, moving or deleting buttons, changed keyboard shortcuts, and renamed functions. Oh, and added hoverscrub, you know...like FCPX. In exchanged there was loss of functionality, stability issues and broken codecs.
I really hope the next release is more like CS5x and less like FCPX

In website, Firefox will not go to the next screen. Instead I have to click 'allow'. This is on sites where I never had this problem. I want it back to the way it was.

On sites that I have been using for many months with no problem, when I click to go to the next screen (like 'continue'), it doesn't go to the screen. I get a bar and have to click 'Allow'. This is happening continuously on screens where it didn't do it before. If it were occasional I wouldn't mind. But it happens all the time. What was changed in Firefox to cause this problem. It has really been a pain paying bills online.

What is the message to the left of the Allow button? Hopefully with that information we can advise on changes to your settings to resolve the issue.
You also could supply a URL of a site that has this problem, assuming we don't need an account to check it out.

Where's the next issue of LOST?

Similar Messages

Maybe you are looking for