Where the device name are saved when distributing a NI-DAQ executable?

Hello,
1. I created a simple LabVIEW 2013 executable using NI-DAQ (c series module NI-9263 and USB compact DAQ 9171 chassis).
2. Then I created a LabVIEW installer with the following recommended installers:
- NI LabVIEW Run-Time Engine 2013 SP1
- NI-DAQmx Core Runtime 9.8
3. I've installed it on a computer in a lab (no NI software installed on it yet).
4. In my application I have a "DAQ Physical Channel" control to select the hardware.
5. When I click on the arrow to select the hardware I don't see any choices (my hardware is plugged in the lab computer) and I can see the devices in device manager.
6. I entered manually the device name (same name as I assigned on the computer that compiled the executable) and ran the application just fine without any errors.
Where is the device name is stored on the lab computer and how does this work?
7. I made a modification to the simple executable to add hardware (with a new "DAQ Physical Channel") and I only compiled the executable and copied it to the computer lab. I'm not able to run it.... I'm getting some error from the hardware (can't remember the specific error).
8. I've searched for MAX and it's not installed....
What should I do to make it work?
This application is not critical right now, but I'd like to know how this works.
Feel free to ask for more detail.
Michel

Michel_Gauvin wrote:
Yes, that's what Idid.
What is the use (or the goal) of distributing an application that is using DAQ device without MAX? How can the application knows which hardware to use if multiple hardware is plugged in the destination computer?
Michel
Two ways to go about this.
First, for low mix systems I ALWAYS install max and all the DAQmx stuff is stored in MAX my installers then import the *.nce MAX config File and include all the DAQ software (Not just Base!)
For higher mix systems the DAQmx stuff (Chans, tasks, scales....) are persisted to the PROJECT (*.lvproj) then the app builder creates a NI DAQ file in the application build destination and the app looks for that file.
You can ALSO (with NI USB Devices) create a "Helper app" that hooks into NI Device Monitor and assigns a specific alias to a type of device when it is seen.
Jeff

Similar Messages

I have a mac laptop and when i plug my ipod touch (fourth generation), the computer does not even know its there. I look for the little box where the devices usually are and there is nothing showing up. I need help.

Additional info.
This computer is a computer handed out to us from school that we use throughout highschool. We are allowed to sync our itunes accounts so theres no problem there.

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Where the Collaboration Task are saved.

Hi all,
I have created one task in collaboration room and submit for approvel. The approver to receive the task and Approve it. After that it shows in Tracker Workflow. Now i want to know where these task stored in KM or portal. Please help me..
Regards,
Kumar.

hi,
If any one tell me how to fetch the Task from UWL using API. Any sample for that. please help me.
Regards,
Senthil

In the finder, in devices where the pen name appears. I dragged to the desktop and now whenever I put my pen can not find it. but I know it is connected because when shooting says he was ejected.

in the finder, in devices where the pen name appears. I dragged to the desktop and now whenever I put my pen can not find it. but I know it is connected because when shooting says he was ejected.

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

When log In names are saved and all you have to do is click in the space to get a list of previous log in's. How do you get rid of those previous log in's?

# Question
When log In names are saved and all you have to do is click in the space to get a list of previous log in's. How do you get rid of those previous log in's?

* http://kb.mozillazine.org/Deleting_autocomplete_entries
Remove saved Password(s): Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"

How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Help. I accidentally formatted by the device name not the volume name when trying fresh install osx Mountain lion.

I was trying to do a fresh instal of Mountain Lion. By fresh I mean clean.
Firstly, my iMac disc drive isn't really working to well, so I have Mountain Lion on a usb.
I started up and held the option key.
Entered into disc utility mode, and started doing everything correct.
Then near at the end I when i'm required to select a start up disc it doesnt show anything... Help?
I checked around online and saw this tutorially and notice I had done something different.
http://macs.about.com/od/MountainLion/ss/How-To-Perform-A-Clean-Install-Of-Os-X- Mountain-Lion-On-A-Startup-Drive.htm
on page 2. where it says
When Disk Utility opens, select your Mac's startup volume from the list of devices. If you never changed its name, the startup volume will be listed as Macintosh HD. Be sure to select the volume name and not the device name, which will usually be the name of the physical drive, for instance, "500 GB WDC WD5."
I think I may have selected the device name. Is this the cause of my problem?
Can I fix this ? Please help?
I live in Auckland in New Zealand, I don't have any apple stores here

Ok, I realized that won't work, I don't think, because you can't enable it on your Mac.
However, if you have another Mac, you can use Firewire Target Disk Mode to install. Boot your Mac while holding down the T key. You will see a FireWire symbol on the screen. Then, connect the two with a Firewire cable. Your Mac hard drive will show up on the other. Try to install onto that.
This may not work, depending on the other Mac. If it is similar to yours, it should.
I'm not sure if you can do it the other way. If you put the DVD into the other Mac and boot it into Target Disk Mode, then boot yours holding down the option key, you may be able to select the DVD on the other Mac as the startup.
This very old article seems to indicate it will work: http://lowendmac.com/misc/06/0914.html
Remote Disc Instructions:
Here is Apple's info: http://support.apple.com/kb/HT5287
Here is now to enable seeing the Remote Disc on your Mac: http://hints.macworld.com/article.php?story=2009012605560521

Table name where Broadcaster precalculation variables are saved

Please help me with the table name where Broadcaster precalculation variables are saved. Thanks.

Hello Jinal
Please go to transaction SE11 and there search in database table for tables starting with
/BIC/OB*
My table for example is named as following /it is the first precalculated value set:
Transparent table -> /BIC/OB00000001
description -> Calculate with Broadcast Setting Z_CCUSTOMER_PRECALC_01
However table class is L, where so I don't knwo how to see the data..
In case you know please let me know
Best regards
Christian

IPhoto won't recognize my iPhone 3Gs. just says there's an apple iPhone, instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on?

iPhoto won't recognize my iPhone 3Gs. just says there's an "apple iPhone" instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on? as far as I can tell I have everything up to date and it's always worked in the past.

Have you already confirmed your Mac as a trusted device? Try this:
Lauch iTunes.
Connect the Phone/iPad
When it asks you to trust it, say yes.
Now try again to import.

I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

The new event are created when i import photo in the top. Before they where put in the end. All my event are classified. Where i can set the event at the end ? Thank's.

The new event are created when i import photo in the top.
Before they where put in the end.
All my event (around 600) are classified on the top the old and a the end the new.
Where i can set the event at the end ?
Thank's.

View menu ==> sort events
LN

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer. This happens with mp3 and mp4 and just wav files. Some audio are accepted, most are not. I get that codec is not installed error message, too.

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

TS1702 My IPod Nano is synched to my ITunes library, but when I click on the Device name, all of the music is "grayed out" and I can't click on anything.

My IPod Nano is synched to my ITunes library and shows up under Devices, but when I click on the Device name, all of the music is "grayed out" and I can't click on anything.

In order for this content to not appear grayed out, you need to enable the Manually manage music option from under the iPod's Summary tab in iTunes. Keep in minding that manually managing your iPod's contents is different from having content automatically sync to your device from iTunes. See here for more information.
Managing content manually on iPhone, iPad, and iPod
B-rock

Setting the "Device Name" when activating device licenses

What determines the “Device Name” in the list of activated devices in the Development Pool on the Adobe license site for device licenses? Specifically for Macs... It doesn't seem to be the "Sharing Preferences" pane...

So, figured it out by myself. It appears that the Adobe serializer uses the local Mac's hostname. You can find that out by going to the terminal and typing 'hostname'. The host name gets set initially by any domain name that is assigned to the IP. If none is, it uses the Sharing Name in the Sharing preferences pane. Regardless, you can override and change the hostname using the terminal (sudo scutil --set HostName mynewhostname.local). Deauthorize the device on the Adobe site and reauthorize and it will appear as desired. This way, you can have the machine listed on the Adobe site however you wish rather than by domain name. This is helpful if you have a long list of machines and wish to set their hostnames to their room number or location, etc.

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

The only difference I see between looking your site between Firefox and IE is that Firefox is slightly less tolerant of a narrower window than IE but I don't see parts
missing they may be covered up but that happens on both browsers where the picture overlays wording down left side.
I can't really tell whether you are saying Firefox or IE is missing parts, but they look the same to me. First time looked it like Firefox was missing portion but it was just dropped down for some distance text and pictures were not missing.

Where the device name are saved when distributing a NI-DAQ executable?

Similar Messages

Maybe you are looking for