Where to add html format for phone # so it dials on touch in List View

Hi,
In Apex 4.2 Jquery mobile list view how can you apply html format for the phone# field to make it dial with a touch. For example, I see how to do a list view of the 'DEMO_CUSTOMER' sample data, but I cannot figure out how to format the phone # fields so that they will dial on touch. I know the HTML tags to use and I know how to use it in a standard report, but I can't figure out list view.
Thanks,
Pat

Hi, Vincent,
Thanks for the quick response! I found the Settings and subtype but when I set to phone it does not make the phone # dial-able on touch.
In a report I can set : Column Formatting --> HTML expression to:
<a href="tel:#PHONE_NUMBER#">#PHONE_NUMBER#</a>
The phone # will then dial out when touched on smartphone. List view does not seem to allow formatting the column with such a format. Seems strange that Jquery mobile would not have this type of formatting 'built in' so any subtype defined as phone would automatically be dialed on touch.
Pat

Similar Messages

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

Hello Huss87bash,
This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

How to export the report in HTML format for desktop application

Hi,
i have wrote the JRC desktop application to export the report and i am able to export it in PDF and other formats as mentioned in "ReportExportFormat" API.
i would like to know is there any API there which can export the report in HTML format.
i know it would be possible with web based application of JRC, but how can i do it in desktop application?

There's no mechanism for static HTML pages that displays the report.
You can use the CrystalReportViewer DHTML viewer, but that's 'interactive'.
Sincerely,
Ted Ueda

HTML Format for Smartform

Hi,
How can I change the format of a Smartform to the different output formats "Html" or "PDF" in the programm?.
Have I to change the output-options ? What are the combinations?.
Where can I read anything about these questions?.
Thanks.

Thank you ,
I have solved the problem with your tips.
I have made a program and I can change my smartform in normal Print or PDF or HTML format.
Perfect.
Thanks again

Where is the HTML-Code for the Dashboard-Links defined? How to edit it?

Hello everyone,
I'd like to know where HTML-Code for the Dashboard-Links (My Dashboard, insert random Dashboardname here, ...) is defined.
Inspecting HTML-Code via the browser, i'll got the following HTML-Tag:
an <a'' href="...url"... class="CurrentPortal" name="DashboardBannerLink" title="...">Dashboard-name</a''>
What i know is, that i can modify portalbanner.css and edit the style of those links.
But thats not what i want, though. I want to modify the html-code itself, for example change the layout of the table etc, to meet our company's corporate design requirements.
Thats why i tried to find the terms PortalLink and CurrentPortal within the Message-Database (/msgdb).
Unfortunately, i got no results.
As a consequence, I believe HTML for those Links is generated by saw.dll internally and therefore can not be edited.
Now i need someone to prove me wrong ;)
Thanks in advance,
Chris
Edited by: Chris2010 on 16.08.2010 11:11
-had to edit the html tag, as the code was turned into a clickable link when i posted the thread

I still didn't find a solution until now, although i checked almost every xml file, that i was able to find.
At the moment I am sure, that it would be necessary to edit sawm-Parameter "bannerHtml" to meet my requirements. Now, i dont know whether its possible to edit it or not, since those saw-parameters do not seem to be documented on the web.
That's the part, i found in dashboardtemplates.xml (Line: 362)
<WebMessage name="kuiDashboardBanner" translate="no">
<HTML>
<table class="PortalBanner" width="100%" border="0" cellspacing="0">
<tr>
<td class="PortalLogo">
"<\a href="@{dashboardsURL}">
<img class="PortalLogoImage" border="0" src="fmap:Portal/PortalLogo.gif"/></a>
"</td>
<td class="PortalTop" style="vertical-align:top">
<sawm:param name="bannerHtml"/></td>
</tr></table>
<sawm:messageRef name="kuiDashboardMainBar"><sawm:setParam name="product">dashboard</sawm:setParam></sawm:messageRef>
</HTML></WebMessage>
-----

Problem in Displaying image in HTML format for BI Publisher (OTM)

Hello,
We are using OTM 6.2 and we are developing the IB reports to the customer.
I am getting dificulty while displaying the image in HTML format. I used image in JPEG format. When i am running the report, It displayed only in PDF format, but not in HTML and Excel format.
Please do the needful help in this regards.
Thanks & Regards,
Siva Donthi

Hi Kavipriya,
i have gone thru all your threads on a similar sort of issue which i am facing now, However i m bit struck as i m newbie.
Issue:i am insering a static picture from the c drive into the header section of the rtf template and when previewing the rtf template on the BI publisher the jpg image disappears. i have tried adding the url into the format picture -->alt tab.Still no signs of improvement.
However if just placing the jpg image on header section without using the wrap text it gets displayed.But if i use wrap text on the image ,it disappears.
could you guide me please in fixing this issue .
Appreciate your timely response and your co-operation
Thanks
Joe

Where to locate return label for phone

Placed three new orders online for Early Edge phones. One iPhone 6, and 2 Samsung S5s. I did not get a bag with one of the phones and I called Verizon and they said that I need to come online and I can find where to order the bag to return the old phone. I don't see that. I also didn't know that the phones had to be in excellent working order that I am returning. My sons phone is in his life proof case. However, before he had the case he cracked the glass on the back of the phone. That is why I ordered the early edge so I could replace his phone. Please advise on both issues. I need to get this phone returned.

> Where do I configure a GR Label to be printed using
> MIGO?
>
> The entires need to be in T1590 but I do not know how
> to enter the values.
>
> Some Transaction Code should be doign this. I would
> like to know what it is.
>
> Thanks,
> Ven
Hi,
SPRO>Materials Management>Inventory Management and Physical Inventory>Print Control>Set Label Printout
For output type used for label, you would need to setup output (condition type) in Maintain Output Types under SPRO>Materials Management>Inventory Management and Physical Inventory-->Output Determination
Read its associated IMG help document right before each of these config elements...You can learn yourself.
once you configure this, for labels, expecially, you need to setup master data in storage location data required.
Good Luck.

Where to update cancelled creditcard for phone insurance

I have 3 phones, samsung epic 4g's
My creditcard had fraud and i cancelled it, I have a new c/c to enter so best buy can charge ins. coverage every month.
the phone #'s are {removed per forum guidelines}.
Where do i update this, this has been a uphill battle to find on website...

You have to call 1888bestbuy to do it.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Where to add new drives for best speed

I've got a G4 here, and I want to add a 300GB drive for video scratch data - obviously I'd like everything to be as fast as possible.
My question is, the front drive bay has ATA buses labeled ATA33 and ATA66, which I'm assuming mean it uses the lower speed ATA. On the other hand, the higher speed bus (ATA100) already has the main system drive plugged into it. Which location for my new drive will get me the best performance, on the same cable with the other drive, (ATA100) or on a second cable (ATA66)?

Not everyone realizes that the MDD has native large (48-bit) support on both the ATA-4 and ATA-6 buses.
What you may want, though, is an ATA or SATA controller if you want to create a scratch RAID.
the ATA-4 (ATA/66) bus is about 4% slower than ATA/100. I'm not sure if you will see the 65MB/sec that your new drive is capable of. But that has nothing to do with being ATA/100/133 or ATA-6 or ATA-7.
You could use the 300GB drive as boot + scratch drive, using the ATA/100 bus, and keep /Users/account on ATA/66 drive bus. Otherwise, if you already keep OS/Apps only on startup drive, and have data and media files on another drive/bus, you might want to look into (S)ATA controller.
There is an article (sticky) on MacNN Forum, under PowerMac, that lists what Macs have native support for 48-bit etc., very useful. The QS/2002 was the first PMac to support >137GB drives too.

Where is the fingerprint app for my new ENVY 17t Quad touch smart

I have 2 profiles , the one profile i did a search for " fingerprint scanner" and I tapped the the button that said fingerprint scanner under search. A dos window opened and the a Gui which helped me store my finger print and associate it with my ID. I went to the other profile and tried the same, the dos window comes up...no GUI. Where is the actual app ?

Hello LA1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Alternative for GroupStyle.ContainerStyle to make group headers in list view stretch?

Hi all,
as the GroupStyle.ContainerStyle is not supported anymore (see attached MSDN page) is there any way to make the group headers in a listview stretch across the whole listview width?
Thanks for any clues on that :)
Cheers
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.groupstyle.containerstyle

Hi,
Please see the link:
https://msdn.microsoft.com/en-us/library/windows/apps/dn263110.aspx
GroupStyle class
Three properties of the GroupStyle class for
ListView and GridView are deprecated and ignored. The properties
Panel, ContainerStyle, and
ContainerStyleSelector of GroupStyle are no longer honored when
ItemsPanel is an ItemsStackPanel.
ListView and GridView will be laid out like a traditional list—from top to bottom. Thus, the layout or appearance of items within a group could change in a Windows 8 app that is recompiled
for Windows 8.1 if the app does not explicitly set ItemsPanel but set
Panel, ContainerStyle, and
ContainerStyleSelector. An app that has taken a dependency on the internal structure and types of default
ListView objects can crash because the type of
ItemsPanel will change and GroupItems will not be created when
GroupStyle.Panel is an ItemsStackPanel. This crash would most likely occur when walking the visual tree.
Avoid this by setting ItemsPanel back to the Windows 8 panel (VirtualizingStackPanel)
or removing assumptions about the visual tree structure.
So if you change the ListView ItemsPanel to
VirtualizingStackPanel, the GroupStyle.ContainerStyle can used for ListView in windows 8.1:
<ListView.ItemsPanel>
<ItemsPanelTemplate>
<VirtualizingStackPanel></VirtualizingStackPanel>
</ItemsPanelTemplate>
</ListView.ItemsPanel>
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

What formats are supported in Photoshop Touch for phone?

JPEG, PNG, TIF, and PSD are all supported on Photoshop Touch for phone. PSDX is Photoshop Touch for phone's own native format. RAW is not currently supported at this time.

For those who are interested in these features mentioned above, zarrdave has made feature requests in the Ideas forum.
You can view them here: support for layers request and Support for vector data.

Create a Multiple-Line JButton Without Using HTML format

I used html format for multiple-line JButton and it took a long time to load that button up (about 5 seconds more). Does anyone know how to create a multiple-line JButton without using html?
Any suggestion or sample code will be appreciated.
javamesser

Hello,
You could try using the following:
-give your button some layout (e.g.: BoxLayout.Y_AXIS, or BorderLayout).
-create the wrapped text in separate JLabels (one line in each label)
-add your labels to the button
Advantage:
this solution does not affect the laf classes
Disadvantage:
focus rectangle is not calculated accurately
Regards,
G

Unable to receive email in HTML format on BB Torch 9860 with BIS

I recently purchased BB Torch 9860 with OS 7 and configured by personal and work email on BIS. I am receiving emails only in text format. In some emails with images that have hyperlink, I just see a link and images not displayed. All the images comes as an attachment in the email. My friend having another BB Torch is able to view emails as HTML. But he is with BES.
Is there any solution for my issue? I am not receiving any options in the email preference to enable HTML format for emails.
Appreciate if anyone could help me with this.
Regards,
Midhun

Hi Midhun,
Welcome to the Community
To help you with the issues you're having, on your Blackberry go to your mailbox, press menu, choose options, then Email Preferences and check the box for Enable HTML Email, Download Images Automatically and Confirm External Image Download. The screen may look like the screenshot below:
For more information please check these links:
Blackberry Tips and Tricks
Blackberry 101
Enjoy!
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

How to send the body of mail in html format using servlet

Hi
i developed an servlet using sun.net.smtp.SmtpClient package,my servlet receiving data from an form,i can able to send mail successfully,but my mail body part is in the text format,but i would like to send it as an html format,for ex <input type="text" size="25" name="Name"> as an input field with value received from the form instead of showing tags as i mentioned<input type="text" size="25" name="Name"> ,any help would be appreciated.
Regards.

See this program
But here whats the problem is ,
some maiservers doesnot support html code if u send this mail to yahoo account it will show html code as it is,
hotmail account encodes the html and shows proper fonts and headings
import java.io.*;
import java.util.*;
import java.net.*;
import sun.net.smtp.SmtpClient;
public class SendMail {
          public static void main(String args[]){
          int i = 0;
          //while (true) {
          SmtpClient mail;
          try{
               i++;
               String email = "[email protected]";
               String from="[email protected]";
               mail=new SmtpClient("bizpivot.com");
               mail.from(from);
          mail.to(email);
               PrintStream msg=mail.startMessage();
               msg.println("To: " +email);
               msg.println("Subject: Hai" i "!!!");
               msg.println("<html><head><title>Untitled</title></head><body bgcolor='red' text='#00ffff'><font face='Courier New' size='+3'>Hai How are you Man!!!</font></body></html>");
               mail.closeServer();
          System.out.println(i);
          catch(Exception e){e.printStackTrace();}

Where to add html format for phone # so it dials on touch in List View

Similar Messages

Maybe you are looking for