Where to maintain send express settings?

Hi,
Please let me know where to maintain send express settings?
I know that if the field Sndex has the value 'X' then the express documnet will be sent to the logged in user.
Thanks,
Ravindra

Hello,
As far as I know, you don't have to specifically maintain the send express settings anywhere else. As you must be aware in the 'Sendmail' step that you use in the workflow template, there would be a checkbox above the Subject o fthe mail whether to send the mail as Express or not.
If the checkbox is checked, the value 'X' is passed automatically to the variable "EXPRESS" variable of the task container. So you dont have to pass the value manually, it wd be taken care by the checkbox itself.
Hope this will help.
Thanks,
Samson

Similar Messages

  • How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

    HI
    I created a web application and configured  rbs storage ,
    I uploaded documents (for ex: 18 number)
     after uploaded  documents ,  and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
    and also  I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
    select count(*) from alldocs
    Select count(*) from AllDocstreams
    but when I delete some docs from document library ,
    1)the doc itself deleted from document library
    2)when I check the rbs storage  there is no number of files are decreased(its still 39 files ), its same as  before doc deleted from doc library
    after some time I found the number of files are decreasing from RBS storage folder in sql server,
    here I want to know the how the files are decreasing from RBS storage  after some time, where  shld I check the settings for this? and how I control on it
    here how I know the settings for cleaning up orphan BLBOS how  these deleted BLOB
    adil

    1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
    2. There is a RBS cleanup job which deletes files from RBS. for more info check 
    http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

  • SAP PP: In BOM how to where to maintain the details like Length, Width and Quantity

    Dear All,
    In SAP PP where to maintain the details like Length, Width, Quantity of the material for production information.
    Eg:
    Client will procure a material of 10milli meter Thickness Mild Steel material of fixed dimensions lets say 4meters x 4Meters
    {so the material dimensions are 4000Milli Meter (Length) x 4000Milli Meter (Height) x 10milli meter (Breadth) Mild steel Sheet}
    For production the above plate is to cut into desired sizes as per the drawings given by Design Department of "N" no qtys.
    (let say in drg for the component the desired sizes are 1000Milli Meter (Length) x 1000Milli Meter (Height) x 10milli meter (Breadth) of 4Nos}
    In BOM where all we can maintain the above details. The same details wants to send it to production for their quick reference.
    Also how the system will calculate the weight automatically for procuring of raw material with the above details.
    Note: Purchase department will procure the full length as i mentioned above but not the desired lengths to be produce for production.
    Pls let me know if any further information required for the solution to suggest.
    rgds,
    VKUMAR A

    Hi,
    You can use two options...
    1. Classification...create characteristics like length, height and breadth with CT04, assign these chars to class (CL01) and assign this class to your raw material in classification view in material master (MM02). When you receive the material from vendor during GR enter the values for characteristics. (activate Batch management).
    Now when you create the Production Order, in the components for this raw material, assign the batch..
    When this is issued against the Production order , production people can see the details of values in the batch...
    2. Try to explore the option of variable size item concept during creation of BOM..
    Thanks
    Kumar

  • Controller system and sender system settings view

    Hello Expert zone.
    Was working on a scenario, and was successful in executing it.
    Now, I am only able to continue the process from reselection of the data,  but is there a way to goto the step , where we configure the controller & sender system settings, as I am getting a message that I cant execute this step as its already executed.
    I am not sure if there is a way to see the settings that were configured to execute these steps.
    Appreciate your help.
    Thanks,
    V.

    Hi Anita,
    I just followed the steps given by you, but no luck. Instead of clicking on the "I" which I assume to be the documentation button, and I ended up with a msg "activity documentation not available" in the status.. I also clicked on the "all activity documentation" from the menu, which gave me the below screen.

  • Where we maintain data for this Table T015W in SPRO

    Hi Gurus,
    I wanted to know that where we maintain data for this table T015W.
    This Table relates to banking.

    Hello,
           You could maintain the instruction keys in SPRO under the path
    Financial Supply Chain Management > Treasury and Risk Management > Basic Functions > SAP Business Partner for Financial Services > Settings for Financial Services > General Settings > Basic Settings > Define Instruction Keys
    Kind regards,
    Vinodh

  • Where we can see the settings for Message No L1615

    Where we can see the settings for Message No L1615
    Appl. Area              L1
    Message Number     615

    Hi
    This message cannot be maintained as a warning using the Configuration.
    This message is allowed only AS AN ERROR.
    Thanks & Regards
    Kishore

  • Where are the e-mail settings?

    Hi, I have an E72, I have set up a POP3 e-mail server and I can receive e-mails with no problem, but I cannot send any! Now, I know how to solve the problem, I simply have to change the outgoing port number to the new one given by my e-mail provider, but I CANNOT FIND WHERE ARE THE OUTGOING SERVER SETTINGS!
    The E-mail -> Settings -> Mailbox name -> Mailbox settings tab only has one server setting in it, and it says "Server name". There are no separate settings for Incoming and Outgoing servers! Where can I change them? In the Advanced mailbox settings there is only one setting - for the port number, but again not a thing about which are my ingoing and outgoing servers.
    Pls help.
    Solved!
    Go to Solution.

    thanks albyzas, thanks thetao.
    I have the last version (3.21 I think) and I know where the in/out settings should be located, but here is no such thing under the "Advanced Mailbox Settings"! The only settings I have are the port number and the secure connection on/off. I have this problem since I bought the E72. Previously, I had E71 and it had the in/out settings there!
    BTW the provider I use is listed automatically for my country, just below Hotmail, Gmail and Yahoo (I don't have to click "Other")
    So I have some questions:
    2) Delete and remake the mailbox.  Don't use Nokia Messaging (their push service) by Declining the terms of service.  Maybe that provides more control?
    If I decline them, what client will I be using then?
    3) Can you remove the email client?  I hesitate suggesting that because some people have reported being unable to reinstall...but you can try if you feel daring.
    If I remove it, how can I reinstall it later?
    4) Do you recall when the problem started?  If it happened after a firmware update, a hard reset ( *#7370# , default password 12345) will sometimes fix weird issues that occur after installing new firmware.  Be sure to make a backup first.
    The Problem started when my e-mail provider decided to change the numbers of their ports several months ago...

  • Where to I send my feedback to apple about lion

    I would like express some of my feedback on the new lion program, where do I send the feedback?

    Here:
    http://www.apple.com/feedback/macosx.html

  • What are the correct Send Connectors settings in Exchange 2013

    Hi
    I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles. I am trying to set the send connectors settings, because I've not been able to send nor receive external email via owa. Since I'm separating the exchange roles, my mailbox
    servers only use internal IP settings and cannot resolve external DNS. I'm thinking I need to tick, proxy through CAS for it to work? any suggestions?

    Hi 
    Can you please let us know what version of Exchange that you are using 
    "I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles"
    - Because Exchange 2013 does not hold hub role.
    " I am trying to set the send connectors settings, because I've not been able to send
    nor receive external email via owa."
    It would be great if you could answer few questions so that people can help you out here
    Are you able to send emails internally without any issues with Outlook ? If not can you paste the errors.
    What error you are getting while trying to send emails through owa . Can you paste the errors.
    If you are looking for steps to create new send connector please follow below technet article
    http://technet.microsoft.com/en-us/library/aa998936(v=exchg.150).aspxFeel free to post your comments/errors you received  to proceed
    further
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Spontaneous black screen with Zen V Plus. / Where do I send it

    Dear Creative,
    I purchased a 2GB Zen V Plus roughly four months ago. It was a present to myself and a tool to accompany me on my long flight. (You see, I was about to spend 9 hours on a plane as I moved to the United Kingdom.) Before I purchased this lovely device, I did extensi've research. I had planned on buying an MP3 player that exhibited the features I wanted AND would last quite a while. Everything I read about the Zen V Plus was perfect. Not a complaint in sight.
    Until today.
    Over these past few months, I haven't actually used my Zen V very often. I can count on one hand the amount that I actually have used it. Once on a short walk to post office. Once on a walk to ASDA. Once whilst I was hoovering and waiting for my laptop to come in the post. Plus, the flight across the Atlantic -- about 2 hours continuous use. The rest of these four months, my little Zen V has been nestled away in its case, in my nightstand drawer, next to my bed.
    Now that you know all this, I'm sure you can imagine my surprise when I pulled it out of its case this afternoon and discovered my screen was drastically faded. My initial thought was that it may be a problem with the contrast. So I inserted a thin object into the reset slot and powered my Zen V back on. This is when I discovered, well, nothing. A plain black screen. No lines, no text, no glow -- nothing. My buttons still glow with the blue color they always have when my Zen is powered on. Plus, when I push 'play' music happily sounds through my earbuds.
    After I discovered that my precious Zen was broken, I quickly took to the Internet to find a solution. But what do I find? Several cases like mine strewn across message board after message board. Even a search for 'black screen' on the forum I'm currently posting this to returns with ten results.
    Is this a problem with 'firmware' or is this a problem with design? Did you acti'vely know about this problem when these devices were tested and 'OK'd to ship? A better question is, do you care? Why is there no recall and why is there no repair time faster than two months?
    Furthermore, I'm well under my warranty expiration date. It comes with a year from the date of purchase, no? The downside of this is that every bit of my Zen V paperwork is back in a box, within a box, within my storage unit in the USA.
    So now that you know my problem, please help with a solution. How do I pursue repairs on my Zen V Plus? Where would I send it within the UK? Is my warranty still valid now that I've moved? If not, what will the price be to repair? Etc etc.
    Don't get this letter wrong. The times that I've used my Zen V, I've absolutely loved it. It's a very nicely packaged mp3 player with some equally nice features. Trouble is, I expected it to hold out a bit longer than /3 of a year.
    Love,
    Vrai

    Yep. Tried that. A few of times, actually. I tried to 'update the firmware' also. I did this blindly (more or less) as I couldn't actually see the screen. I just followed the physical instructions and tried each possible thing you could. I'm not actually sure if I ended up repeating myself. Did it about eight to be sure. I think there are only four options on the menu where you can access the firmware.

  • Where did my old custom settings go?

    Just downloaded compressor 4 from App Store...where are all my custom settings from Compressor 3 and will they work in compressor 4?

    When you mount a partition to "/home" is "goes over top of" what is already there.  Most likely your old user is underneath that old mount and can't be seen because the new mount is sitting on top of it.  You could boot off the Arch ISO, make sure your new /home isn't mounted, and move your old user out of /home and then mount your new /home and copy the user onto that partition.

  • I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
    If recovery does not work there's:
    DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • FI:where to maintain the data of "Group account number"?

    Hi.When I use the T-CODE FS00 to create G/L account,the sap require me to Make an entry in field "Group account number".But when I press F4 on the field "Group account number",the sap tell me there is no values.So I need to maintain the data of "Group account number".But I don't know where to maintain the data of "Group account number".So I need someone give me the T-CODE or some advice.Thanks so much.

    Hi,
    You have activated group account number. If you have any grp account number of your company please provide the group company account number.
    Else if you dont want to give group account number
    In T-code: OB13 remove group chart of accounts from your chart of accounts
    Best Regards
    Ashish Jain
    Message was edited by:
            Ashish Bohara

  • Where we maintain the cost of  characteristics  values in variant  conf.

    Hello guys,
      This thread i have posted many times in sdn , but never got the satisfactory answer.This time again i am trying my luck.
        Actually i am unable to understand how costing takes place in variant configuration.
        Suppose i have created one sales order for configurable material and there we select all the characteristics values which we want.
    But we don't maintain the prices of these characteristics values anywhere.So when i create the sales order than how the sales people calculate the cost of that order.
        Take a example of computer.For making computer,i want cabinet, processor, Harddisk, Ram, which are available in many sizes.So What we do that we create one configurable material and inside it we maintain all this characteristics and its values.And then i create one sales order for that configurable material and select the suitable characteristics and its values as reqd my customer.
         Now my question is how they cost that sales order?As we don't maintain the Accounting and costing view in material master of configurable material.
       So where to maintain the prices of these characteristics values?
            Plz guide.

    Hi
    You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
    variant conditions to define surcharges and discounts for a variant
    Variant u2013Pricing steps
    Create condition record
    create a procedure where you enter the reference from the characteristic
    Assign the procedures to either the characteristic values
    configure the material in the sales order
    The net price for the material is displayed
    If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
    In addition, the Conditions pushbutton is displayed.
    On pressing this pushbutton,
    One can see which conditions have
    influenced the price.
    I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
    Thanks

  • Hi All,Where can any send me material on ABAP-HR urgent please

    Hi All,Where can any send me material on ABAP-HR urgent please .
    Thanks&regards.
    Bharat Kumar.

    Hi,
       Here is a good start......
    http://www.planetsap.com/hr_abap_main_page.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.
    Regards

Maybe you are looking for