Where to mention the IP address in a JSP dyn page

Hi ,
I am creating a mail sending system with Javamail.
Created the JSP dyn page,
wrote the event handler in the java file. and all.
now I have to mention the IP address of the SMTP server.
where should I do this....
inside the event handler itself?
Thanks in advance.

Hi
The button tag in the jsp looks like this
<hbj:button
        id="sendEmail"
        text="sendEmail"
        width="125px"
        tooltip="Click here to send mail"
        onClick="sendEmail"
        disabled="false"
        design="STANDARD"
        />
The function to handle the button eventing occurs in the dynpage . The function looks like
public void sendEmail (Event event) { ..coding.. }
Now when the button is clicked, the control is transferred to this event handler sendEmail and the code with init starts executed.
Hope it is clear...
Regards,
Ganesh N

Similar Messages

Where to find the MAC address?

I just purchased the latest iPod Touch. I need to know the MAC address to register with my WI-FI. Where do I look for it?

Hello LCMan,
On your iPod Touch, head to *Settings -> General -> About*. Then look for the *Wi-Fi Address* field and there is where you will find the MAC address.
B-rock

Where to configure the SCAN address?

Hi,
I'm in the middle of installing the Grid infrastructure cluster for Oracle 11gR2 RAC on AIX 6.1
I had defined the public IPs, private IPs and interconnects in the DNS and hosts files. I am not using GNS because we use static IP Address, no DHCP.
during the installation, I will be asked for SCAN IP address, which I prepared and resolved by DNS, but I don't know where to configure it
The SCAN IP address is not pingable but can be lookedup and I get the reply to it
Where I put it, in the Rack Switch or shall I choose different installation method.
Kindly advice
Regards,
C.

Oracle is clear about the use of /etc/hosts to configure the SCAN:
See Note: *11gR2 Grid Infrastructure Single Client Access Name (SCAN) Explained [ID 887522.1]*
Instead of DNS or GNS, Can we use '/etc/hosts' to resolve SCAN?
Oracle strongly recommends that you do not configure SCAN VIP addresses in the hosts file. If you use the hosts file to resolve SCANs, then you will only be able to resolve to one IP address and you will have only one SCAN address - be sure to provide a hosts file entry for each SCAN address in hosts file in same order.
If hosts file is used to resolve SCAN hostname, you will receive Cluster Verification Utility failure at end of installation (See NOTE: 887471.1 for more details)
However, since you have already installed with the configuration in the /etc/hosts, you can fix this by configuring the IP addresses in the DNS (since you don't use GNS) and follow the following note to modify the SCAN settings:
*How to Modify SCAN Setting after Installation [ID 972500.1]*
Herve Etche

Ive bought one Programme of Lightroom4, and so where it mentions the Previous one,I cant get by

Hello

Not clear what you mean.
Where doers it "mention the Previous one"? What - exactly - does the message say?

SeeBurger Receiver VAN/FTP Adapter: where to mention the target path

Hi,
I am using SeeBurger VAN/FTP adapter for IDOC-XI-EDI scenario.
In seeburger receiver VAN/FTP adapter, where I have to set the target path. My target path is very long (15 characters).
I am able to configure Host, Port, User id and password.
Please suggest where to put the path name in seeburger receiver VAN/FTP adapter.
Thanks,
Madan Agrawal

HI Madan,
Can you please tell me which VAN provider you are meant to use? It is the same question which Prateek asked above 'which protocol' without this it is hard to help dude.
I just checked and half of them don't want you to use this field 'host path;
Also the error is different ...
1) Are you doing FTP or FTPS?
2) which VAN/Protocol
regards,

When I open firefox, the web address ishows my chosen home page but the window shows "untitled" and I am unable to connect to any site to the internet.

I chose the New York Times site to be my home page and when I open Firefox this address appears in the web address panel. But in the tab box it says "untitled" and I don't connect to any web page. I have tried reloading firefox, nothing seems to work. How can I stop this?

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

In HELLO Where doI put the email address of a contact.

I must be very stupid (admitted) but I cannot get Hello to work for me. Where do I put the email adddress of a person I wish to contcact.

Hi Brad,
I really appreciate your taking the effort to help - I must be the greatest of idiots or someting is wrong with my system. I click on the Hello button at the top of my screen and this brings up a panel stating "conversation 1" and below that "Start a conversation" in a blue box. I cannot see the two tabs you refer to "one for chat and other for contacts."
Unfortunately I am going away for a few days and will not be able to respond, but certainly will when I return.
Thank you for your interest.

Where we mention the Profile Attributes when we call these attributes throu

Hi
I have query
I am working in Call Centre Application on 7.7 version. Some of my x employees have written some scripts on some Business Components. In that Scripts they have called some GetProfileAttribs with out using the SetProfileAttribs.
But i can not under stand where they have set this Profile attribs and from where they are calling these attribs?
If any body have an idea on this please let me know ?
Thanks
Venkat

As well as "dynamic" Profile Attributes there are also static profile attributes that are stored within the system. You can see which attributes have been defined by looking at the fields defined on the "profile attribute" BCs.
In Siebel Tools go to the Business Component view and query for Profile Attribute.
There is more information about the use of these BCs in the Personalization Guide in Bookshelf.

How do I get the URL address of a newly uploaded page?

I'm using the files manager to upload my page to the server
at school.
When I'm viewing the page in Dreamweaver and go to Preview In
Browser it keeps giving me my local folders address, instead of the
file I uploaded to the server at school. I need to Preview In
Browser
the file on the server so I can copy the correct URL and
send it to my teacher in an email (I need to send him my link to
view my work).
What am I doing wrong?
I can upload to the server because I see my newly uploaded
files sitting there in the Files manager.
How do you Preview In Browser the file on the server? I need
it's URL address.

Hi guy
Preview occurs on your local computer...
Once it'a uploaded to the server, it's too late for
"Preview".
Visit the school's website, or contact the school's server
administrator
for the URL path to your pages.
"smittyboy63" <[email protected]> wrote in
message
news:er8cdv$hl3$[email protected]..
> I'm using the files manager to upload my page to the
server at school.
> When I'm viewing the page in Dreamweaver and go to
Preview In Browser it
> keeps
> giving me my local folders address, instead of the file
I uploaded to the
> server at school. I need to Preview In Browser
the file on the
> server so
> I can copy the correct URL and send it to my teacher in
an email (I need
> to
> send him my link to view my work).
> What am I doing wrong?
> I can upload to the server because I see my newly
uploaded files sitting
> there
> in the Files manager.
> How do you Preview In Browser the file on the server? I
need it's URL
> address.
>

What is the best techology to build jsp databound pages?

Hi all,
I have to develop a simple web application that allow the end user to insert, update and query data on tables. there is very few logic to implement, what I need is a way to quicky create a web front end to some configuration tables.
Once I started with bc4j data tags, but now after reading the help I understand that this technology is not recommended to start new applications.
Can anyone point me to the best JDeveloper technolgy to quickly develop simple web appllications?
Thanks in advance,
Giovanni

There is a lot of material on using ADF in the online help.
There is the new JDeveloper 10g Handbook that's just come out:
http://www.amazon.com/exec/obidos/ASIN/0072255838
There is a lot of good technical information in two meaty whitepapers that I've written:
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/ADFBindingPrimer/index.html
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/adftoystore/readme.html
And then there are lots of Tutorials, HowTo articles, and samples on OTN, available from the JDeveloper home page.
Hope this helps.

AADSTS50011: The reply address does not match the reply addresses configured for the application

Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank Russo

Hi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

I need to change the email address in my account

I can't see where to change the email address in my account. The address listed is one that I no longer have access to and every time I try to change it, it tells me that the address I change it to is not available.
Where can I change the email address?
Christina

You should be able to change it at https://www.adobe.com/account/account-information.html
If not, what is the exact error message you are getting?

Can you tell the IP address of a device attached to a 6500 Catalyst Switch

I have devices attached to a Catalyst switch, and I wanted to find out which device is attached where by checking the IP address of a specific device attached to a port. The ARP tables don't show any devices. Anyone know a quick/dirty way to do this?

The arp table on your switch does not show this as the switch does not talk to devices directly and thus does not need this information. Do this:
- From the switch ping devices you want to find where attached to.
- type "sh arp" on the switch. This time it will contain the information you need.
Similar to this:
switch6500> (enable) sh arp
ARP Aging time = 1200 sec
+ - Permanent Arp Entries
* - Static Arp Entries
10.0.0.1 at xx-xx-xx-xx-xx-xx port 1/1 on vlan 15
10.0.0.30 at yy-yy-yy-yy-yy-yy port 1/1 on vlan 15
switch6500> (enable) ping 10.0.0.20
----10.0.0.20 PING Statistics----
5 packets transmitted, 5 packets received, 0% packet loss
round-trip (ms) min/avg/max = 1/1/1
switch6500> (enable) sh arp
ARP Aging time = 1200 sec
+ - Permanent Arp Entries
* - Static Arp Entries
10.0.0.1 at xx-xx-xx-xx-xx-xx port 1/1 on vlan 15
10.0.0.30 at yy-yy-yy-yy-yy-yy port 1/1 on vlan 15
10.0.0.20 at zz-zz-zz-zz-zz-zz port 3/22 on vlan 15
switch6500> (enable)

Merge Address Book creates 4 of the same addresses on a Post Card in Pages

I'm a little miffed right now because I just spend 20 minutes on the phone with apple support who told what I needed to do but couldn't tell me 'how' to do it.
I'm trying to print multiple postcards (pages default if 4 postcards/page), all I want to do is merge my address book onto these postcards with EACH SEPARATE POSTCARD having different address...that means on a page with 4 postcards, I have 4 different addresses. What currently is happening is that I'm merging about 200 addresses from my address book, and it creates the same address 4 times(on one page, all four postcards), then creates another page for the next address (4 more postcards on that page). This leads to 4x's the amount of postcards I need to actually print.
Support told me that I need to change the setting from 4 post cards per page to 1 post card per page...but couldn't tell me how to do that. They suggested I look in 'help' for an answer....which I always do before calling support anyway. Any help would be nice here. I thought my apple protection service/support plan would help in instances like these...and YES, this answer came from an 'applications specialist'.

Cgip wrote:
Here's my question then, if the default in the postcard template is 4 post cards/page, how do I change it to one? This really seems like it'd be an easy fix, but I may be wrong.
I wrote:
The merge tool merges one record in one document. If the document is a "one_page" one, this means one record per page even if the document uses only 1/4 of the sheet.
We are writing upon a MERGE tool, not upon a LABELIZER one !
The only soluce would be to use a custom paper size whose height and width will be half the standard one.
Doing that you will be able to print one card on one small page.
If you try to put a single card on a page you will leave 3/4 of the sheet white.
You may also build four templates,
one with the card top-left
one with the card top-right
one with the card bottom-left
one with the card bottom-right
So you will be able to print
1/4 of cards with template 1
1/4 of cards with template 2
1/4 of cards with template 3
1/4 of cards with template 4
As I wrote, "doing (exactly) what you wish can't be done with Pages".
This is what was responded many times.
What you wish has nothing to do with MERGE. It's the job of a LABELIZER tool !
Yvan KOENIG (from FRANCE samedi 3 mai 2008 18:59:03)

Can you change the email address to where your Bro...

Hello.
My BT Broadband account BT Internet emaill address is a different email address to my everyday BT Internet email address that I use to send from and receive emails in.
I don't send emails at all from my BT Broadband account email address.
Therefore when my BT Broadband Usage goes over 6GB and then 8GB, I am not aware of it unless I log into my BT.com account and check or log into my BT Broadband account btinternet.com email address as the advisory emails go into that address which I don't use for emailing from.
Is there any way I can have these advisory emails sent to my everyday BT Internet email address instead? Or even continue to be sent there and my main email address? Either by being able to do anything online or by contacting BT by phone or email and have them do it?
I did actually contact BT once before by emailing them and someone in India phoned me back to say they will do that for me but they've not done anything at all for me and the advisory emails still continue to go into my BT Broadband email address instead.
Could anyone tell me if switching the email address or adding an email address as to where these BT Broadband Usage emails are sent to is possible?
Hope it is and that you can tell me how this can be done with any helpful link or contact address/number without speaking to anyone in India.
Thanks.

Hi, I have the same problem, except that the advisory emails are being sent to a completely new email address which I never set up and which I can't access or login to. I didn't know about this until a bill arrived with a £5 charge for excess broadband usage, but I didn't know how to check it until now. I have now received an email (to my correct address) saying "Keep an eye on your usage" which has a link to an online monitor and to my horror I see that my usage has been well over the cap for some months. Yet I never received the advisory emails because I had no idea they were being sent to the unknown address. How can BT invent an email address and then use it to warn me? More to the point, how do I change that email address? I can't login to it because I don't know the password!
Any advice would be gratefully received.
Tony.

Where to mention the IP address in a JSP dyn page

Similar Messages

Maybe you are looking for