Where to set query parameters

If I have a View that has a sql query with parameters in the where clause, where is the proper place(s) to set the value of the parameter? Presently, I am overriding the prepareModel method of the AppModule to do this, but is there another place this can be done?
Brad

Hi Brad,
there are a number of places to set it based on what you are doing at the time. If the clause will apply for the whole session then set it in the view object implementation class. If specific to a particular page (the norm) then i normally set it in the prepareModel of the dataForwardAction of that page.
Brenden

Similar Messages

How to set query parameters to i5Grid

Hello Everyone,
I am working on creating i5Charts.
I mapped query template and display template to i5Chart template but I need to pass the query parameters dynamically.
How to set query parameters to i5Grid?
Pls help with syntax.
Thanks.
Regards,
Minakshi

Hi Minakshi,
Yes you can try the first 2 options listed by Rohit, the 3rd one however is not supported.
The below syntax should work for you:
1. gridObject.getQueryObject().setRowCount(<Value>);
2. gridObject.getQueryObject().setParameter("RowCount", <Value>);
You can check the documentation at the following link:
http|s://<host>:<port>/XMII/JSDOC/i5ChartAllClasses.html
You could also use the script assistant to check for the JS methods.
Regards,
Ria

Can not start $./emca, how to set the parameters??????

Hi All,
I have Installed Oracle 10g(10.2)(Enterprise Edition) database on HP UX 11.11.
when I try to run $ ./emca it asks me below parameters to setup.
where to set these parameters???Why its asking me so many parameters???
$ ./emca
/oraback/orahome/oracle/product/10.2.0/db_1/bin/emca [operation] [mode] [dbType] [flags] [parameters]
-h | h | -help | help: prints this help message
-version: prints the version
-config dbcontrol db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure Database Control for a database
-config centralAgent (db | asm) [-cluster] [-silent] [parameters]: configure central agent management
-config all db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure both Database Control and central agent management
-deconfig dbcontrol db [-repos drop] [-cluster] [-silent] [parameters]: de-configure Database Control
-deconfig centralAgent (db | asm) [-cluster] [ -silent] [parameters]: de-configure central agent management
-deconfig all db [-repos drop] [-cluster] [-silent] [parameters]: de-configure both Database Control and central agent management
-addInst (db | asm) [-silent] [parameters]: configure EM for a new RAC instance
-deleteInst (db | asm) [-silent] [parameters]: de-configure EM for a specified RAC instance
-reconfig ports [-cluster] [parameters]: explicitly reassign Database Control ports
-reconfig dbcontrol -cluster [-silent] [parameters]: reconfigures RAC Database Control deployment
-displayConfig dbcontrol -cluster [-silent] [parameters]: displays information about the RAC Database Control configuration
-upgrade (db | asm | db_asm) [-cluster] [-silent] [parameters]: upgrades an earlier version of the EM configuration to the current version
-restore (db | asm | db_asm) [-cluster] [-silent] [parameters]: restores the current version of the EM configuration to an earlier version
Parameters and Options:
[parameters]: [ -respFile fileName ] [ -paramName paramValue ]*
db: perform configuration operation for a database (including databases that use ASM)
asm: perform configuration operation for an ASM-only instance
db_asm: perform upgrade/restore operation for a database and an ASM instance
-repos create: create a new Database Control repository
-repos drop: drop the current Database Control repository
-repos recreate: drop the current Database Control repository and recreate a new one
-cluster: perform configuration operation for a RAC database
-silent: perform configuration operation without prompting for parameters
-backup: configure automatic backup for a database
Parameters for single instance databases
HOST: Database hostname
SID: Database SID
PORT: Listener port number
ORACLE_HOME: Database ORACLE_HOME
HOST_USER: Host username for automatic backup
HOST_USER_PWD: Host user password for automatic backup
BACKUP_SCHEDULE: Automatic backup schedule (HH:MM)
EMAIL_ADDRESS: Email address for notifications
MAIL_SERVER_NAME: Outgoing Mail (SMTP) server for notifications
ASM_OH: ASM ORACLE_HOME
ASM_SID: ASM SID
ASM_PORT: ASM port
ASM_USER_ROLE: ASM user role
ASM_USER_NAME: ASM username
ASM_USER_PWD: ASM user password
SRC_OH: ORACLE_HOME for the database to be upgraded
DBSNMP_PWD: Password for DBSNMP user
SYSMAN_PWD: Password for SYSMAN user
SYS_PWD: Password for SYS user
DBCONTROL_HTTP_PORT: Database Control HTTP port
AGENT_PORT: EM agent port
RMI_PORT: RMI port for Database Control
JMS_PORT: JMS port for Database Control
Additional Parameters for cluster databases
CLUSTER_NAME: Cluster name
DB_UNIQUE_NAME: Database unique name
SERVICE_NAME: Service name
EM_NODE: Database Control node name
EM_SID_LIST: Agent SID list [comma separated]
$

Hi Dashan,
it depends or in other words what is management server for you? There's a change from 9i to 10g. In 10g we have dbconsole dedicated to one specific database or gridcontrol as centralized monitoring utility for many databases, application servers and so on. If it is standalone console command is 'emctl start dbconsole', this command starts the console itself and the integrated agent. For gridcontrol use 'opmnctl startall' to start all necessary services, these are many as 'opmnctl status' shows.
Regards
Werner

How too set query print layout parameters?

Hello,
simple task:
1. Open "Query Print Layout...": SBO_Application.ActivateMenuItem("4868")
2. Handle new reports form: SBO_Application.Forms.ActiveForm (I know, the better solution should be get form with proper TypeEx and highest TypeCount, but now it doesn't matter)
3. Select row with required report: m.Columns.Item(0).Cells.Item(row).Click(BoCellClickType.ct_Regular, 0)
4. Run printing: SBO_Application.ActivateMenuItem("519")
5. Handle new parameters form: ???
How can I get newly created form containing report parameters (TypeEx "4000")? I wanna set proper parameters and click "OK" to show printed report. Doesn't work handling:
- FORM_LOAD in ItemEvent
- MenuEvent for "519" (is only BeforeAction
- PrintEvent (executed after accepting parameters)
- ReportDataEvent (passed FormUID belongs to reports list, not parameters)
In each event I've listed all forms and there is no form titled "Query - Selection Criteria" with expected TypeEx.
Is there any way to achive this?

when you activate print preview of printing on selected User Query Layout, you can cacth the ET_FORM_LOAD event of formTypeEx =4000
It is working. Please note if you do not have this event, you may check your filters (?)
Then you can populate your values. Based on my experience the click ok button is not working.
Tip: Search the forum in year 2009 i have posted there sample codes
Regards
J

Query parameters in BC and setting up Site Search tracking in Google Analytics

I would like to enable site search tracking in Google Analytics for a non-eCommerce BC site but I do not know what query parameters I need to use to enable site search tracking - can anyone help?!
I can turn Site search tracking 'on' in Analytics but it requires the query parameters to be entered e.g. 's' or 'q'. I have the option of selecting 'strip query parameters out of URL' but I'm not sure what this does and what needs to be done in the backend of BC?
Usually, when an internal search is done within a website (and in this case it is www.newcastleairport.com.au), the URL will indicate the parameters by adding a 'en&q' in the URL. To test what metric would be used for the Airport, I did a search on 'annual report' and the following URL came up (not containing an en&q)
http://www.newcastleairport.com.au/Default.aspx?SiteSearchID=1012&ID=/travellers-search-re sult#.U3A3HmQ-JU0
Any help would be appreciated. There was a previous discussion re this subject but it remained unanswered but there was a suggestion around using javascript within a web app?
Cheers

Hi Sebastian and Manas,
I am trying to set up a hybrid environment and followed the blog posts. Everything was set up as per the guidelines mentioned but still I am not able to fetch any results from SharePoint Online inside my on-premise environment.
There are no errors coming as such. Its just that my on-premise is showing no results from SPO. However if the same user logs on into the Office 365 SPO site he is able to see SPO search results. That means there is no permission related issue specific to
test user.
I am totally out of ideas now. In case you have faced similar issues while setting up the same then any pointers to troubleshoot would be very helpful.
The link to my query that I have asked on the forums is
https://social.msdn.microsoft.com/Forums/office/en-US/540d2629-ec6b-4905-b8e2-f6ba4e770d26/configure-one-way-outbound-hybrid-search?forum=sharepointgeneral
Thanks,
Geetanjali
Geetanjali Arora | My blogs |

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi .
 I was creating the pass the values t in temp tables though s sis package vs2012 .
 First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
 exec USP_GETMP02333
 go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2nd excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2nd excutive ql task .
Iam getting this type of errors,
 [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

How to handle a large number of query parameters for a Browse screen

I need to implement an advanced search functionality in a browse screen for a large table. The table has 80+ columns and therefore will have a large number of possible query parameters. The screen will be built on a modeled query with all
of the parameters marked as optional. Given the large number of parameters, I am thinking that it would be better to use a separate screen to receive the parameter input from the user, rather than a Popup. Is it possible for example to have a search
button on the browse screen (screen a) open a new screen (screen b) that contains all of the search parameters, have the user enter the parameters they want, then click a button to send all of the parameters back to screen a where the query is executed and
the search results are returned to the table control? This would effectively make screen b an advanced modal window for screen a. In addition, if the user were to execute the query, then want to change a parameter, they would need to be able to
re-open screen b and have all of their original parameters still set. How would you implement this, or otherwise deal with a large number of optional query parameters in the html client? My initial thinking is to store all of the parameters in
an object and use beforeShown/afterClosed to pass them between the screens, but I'm not quite sure how to make that work. TIA

Wow Josh, thanks. I have a lot of reading to do. What I ultimately plan to do with this (my other posts relate to this too), is have a separate screen for advanced filtering that also allows the user to save their queries if desired.
There is an excellent way to get at all of the query information in the Query_Executed() method. I just put an extra Boolean parameter in the query called "SaveQuery" and when true, the Query_Executed event triggers an entry into a table with
the query name, user name, and parameter value pairs that the user entered. Upon revisiting the screen, I want the user to be able to select from their saved queries and load all the screen parameters (screen properties) from their selected query.
I almost have it working. It may be as easy as marking all of the screen properties that are query parameters as screen parameters (not required), then passing them in from the saved query data (filtered by username, queryname, and selected
item). I'll post an update once I get it. Probably will have some more questions as I go through it. Thanks again!

PowerPivot and query parameters

Is there any plans to support parameterized sql queries?If I try to execute query it requests declared parameters by means of form,but I can't check resulting query.Why?It says "Must declare the scalar variable ...".
WTF?
Regards.
P.S.
Without parameterizing PowerPivot is useless IMHO.

What we decided to do, as this is a glaring oversight is to expose a Parameters table via BDC. The end users can then set the "global parameters" for the site, (like date ranges for a quarter that they want to expose). They are able to make updates directly
to the parameters then when the data is refreshed we are able to get a filtered view. Not perfect, but certainly better than having to open multiple sheets to reset very similar parameters.
We did something like this, with the initial settings set to defaults so if the users were to delete the parameters they would simply get this current year. While it isn't 100% wonderful it gets us by, and enables our customer to surface only the data sets
they are interested in making available.
Declare @datestart as datetime
Declare @dateend as datetime
Set @datestart='01/01/2013'
Set @dateend='01/10/2014'
select @datestart = value from parameters where name = 'StartDate';
select @dateend = value from parameters where name = 'EndDate';
QUERY HERE.

"ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly

Hi,
I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA to SQL2012.DatabaseB.TableB to without
any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
Please help!
Thanks
Edward

Hi Athur,
Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
USE msdb
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = ',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
So I have a question: Do I have to create a new user account that can access our network named
PS: Below are the steps I followed the article:
--Script #1 - Creating a credential to be used by proxy
USE MASTER
GO
--Drop the credential if it is already existing
IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials')
BEGIN
DROP CREDENTIAL [SSISProxyCredentials]
END
GO
CREATE CREDENTIAL [SSISProxyCredentials]
WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser',
SECRET = N'abcd@0987'
GO
--Script #2 - Creating a proxy account
USE msdb
GO
--Drop the proxy if it is already existing
IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo')
BEGIN
EXEC dbo.sp_delete_proxy
@proxy_name = N'SSISProxyDemo'
END
GO
and the rest of the script 2 hasn't been proceeded due to error:
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = N'SSISProxyDemo',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
--To enable or disable you can use this command
EXEC msdb.dbo.sp_update_proxy
@proxy_name = N'SSISProxyDemo',
@enabled = 1 --@enabled
= 0
GO
Please advise me!
Thanks,Edward

SAP Crystal Report (2008) through SQL Query parameters

Hi,
I Created a report in Crystal report (2008) based on Sql Query. I created parameters in SQL query prompt only (all single valued).
Based on this I need to show the data in detail section.
For Graph, I used another SQL query, and added one subreport to the Main report header section. Since this subreport is also using the SQL query prompts for taking parameters.
Since both the reports are using same set of parameters. I mapped Main report parameters to sub-report parameters.
So Now structure is like,
In a report there is one subreport.
Main report ....SQL query generates parameter prompt..same parameters is passed to subreport.
In subreport there are sql generated prompts. and we mapped that prompts to main report parameter prompts.
Now it is running fine from crystal report, but not from CMC. It is not showing the graph.
Made Two Experiment:
1. To check subreport is running or not , Mannualy put my name in sub report--working fine.(CMC)
2. To check the parameters are correctly mapped--printed the value in subreport--Showing all the parameters value from CMC
but it is not running the SQL query of that sub report.
Any suggestion ?? Or is there anyoption to check?? Or a CMC setting.
Please suggest and respond..
Thank you in advance.!!

Hi Rajeev,
This is Crystal reports development community, you said the report is working fine in Crystal. it is problem in CMC. So the issue is at BI Server.
So i think you need to create the thread in the below community.
BI Platform
--Naga

How to use SET & GET Parameters in Module Pool

Hi Friends,
Can anyone please tell how to use SET / GET parameters and PARAMETER ID for a text box (Input / Output field ) in module pool? What is the purpose and where do we need to do coding for it?
Note : I will definitely give the marks for good responses.
Thanks in advance,
Pradeep

Hi Pradeep,
You can save values in the SAP memory using a parameter ID. These
are user and terminal-session specific, but available to all internal and
external sessions.
SET Parameter copies the corresponding field contents into the SAP
System memory in the PAI processing block.
GET Parameter copies the corresponding field contents from the SAP
memory at the end of the PBO processing block, after data has been
transferred from the program, if the screen field still has its initial value
You can link an input/output field to an area of the SAP memory in the
ABAP Dictionary.
When you use an input/output field that is defined in the ABAP
Dictionary, its parameter ID is displayed in the Dictionary attribute
Parameter ID in the Screen Painter.
Usage
SET PARAMETER ID: CAR FIELD space,
CON FIELD space,
DAY FIELD space.
Here is the link that explains the usage of GET/SET in detail
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm</a>
Regards,
Sharadha

How to set Query SQL Statement parameter dynamically in Sender JDBCAdpter

Hi All,
I have one scenario in which we are using JDBC Sender Adapter.
Now in this case,we need to set Query SQL Statement with a SELECT statement based on some fields.
This SQL statement is not constant, it would need to be changed.
Means sometimes receiver will want to execute SQL statement with these fields and sometimes they will want to execute it with different fields.
We can create separate channels for each SQL statement but again that is not an optimum solution.
So ,I am looking out for a way to set these parameters dynamically or set SQL statement at Runtime.
Can you all please help me to get this?

Shweta ,
Sometimes receiver will want to execute SQL statement dynamically....
How you will get the query dynamically? Ok Let me assume, consider they are sending the query through file, then its definitely possible. But u need BPM and also not sender JDBC receiver adapter instead, receiver JDBC adapter.
SQL Query File ->BPM>Synchronous send [Fetch data from DB]--->Response -
>...............
Do u think the above design will suit's ur case!!!!
Best regards,
raj.

"Define query parameters" popup in Dataset properties - Refersh field, not displayed for Sps in SSDT 2010 (Works fine in BIDS)

When we upgraded our SSRs projects to 2012, we are facing an issue in Data tools environment.
When we click REFRESH FIELDS button in Dataset properties, With query type as SP (For all our sps), the "Define query parameters" popup is not displayed.
When we checked the SQL Profiler for queries executed at back end , NULL values are used for parameters.
But when we Used the QUERY DESIGNER button, and clicked execute for sp, the popup comes.
For User defined Functions, the Popup comes correctly.
In BIDS, still we can open the RDLs and do the operations correctly
Please advice

Dear Wendy Fu
My Scenario is different.
In Query Designer, Every thing is fine (Parameter Popup is coming, and fields are populated under data set)
But what we need to do is
1, Select Query Type As SP
2, Select the required SP
3, Click Refresh Button
4, A "Define
query parameters" window popsup
5, Provide values and click Ok
6, Fields will be populated under the dataset
The issue we face is that, we are not getting the Define query parameters popup,
Hence NULL values are passed to execute the sp, to retrieve the fields set.
The Work around we are using now is editing the sp, and use
set @Parameter = Value
for each parameters in sp, and then we get the fields populated under dataset, when we click refresh.
The issue exists in both MSDT for
Visual studio 2010 & MSDT for Visual studio 2012.
But every thing is fine in BIDS with VS 2008 Shell for the same RDL

Data Components && Query Parameters

I just started playing with the database binding since I use PostgreSQL. I have a couple questions around parameters. Let's say that I want to make a page to display / update configuration variables from my application. I have a table in my database called config, with two simple members ckey and cvalue. Let's say I have 20 key / value pairs.
I want my page to simply load the values associated with all 20 keys into 20 different text boxes. I created a query with the WHERE clause being WHERE ckey = ?. Now, I've seen some posts that say that I have to have a Session Bean parameter to populate this ? -- is this correct? Can't I have a simple keyword somewhere since this parameter will be fairly static for each of my 20 text boxes? Could I just name each text box the associated ckey name?
Secondly, how do I go about letting the data components update and validate this data if it is changed? The tutorial didn't show me much. Thanks.

Hi,
Please take a look at the AppModel sample application. This is available at:
http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
This sample application demonstrates many features including how to handle the query parameters and how to update etc.
Hope this helps
Cheers
Giri :-)
Creator Team

Where to set query parameters

Similar Messages

Maybe you are looking for