Where to write the code in TMG events
Hi All,
I want to use 05 TMG event.there is so many include programs are there.
In which include i have to write the code.
Please suggest me...
Regards,Raj.
Hi Raj,
You can write it inside the Form include i.e LxxxF01., where xxx is the table name.
The other 3 includes are as follows :
1. LxxxI01
2. LxxxO01
3. LxxxTOP
where LxxxI01 and LxxxO01 are used for Process after input and Process before input events resp.
Hope it helps.
Edited by: Rakhi Nair on Oct 5, 2011 10:10 AM
Similar Messages
-
Where to write the code when the push button is clicked in the screen
I have designed a screen with a push button and a text box
If i click on the push button it should display a value 'hello' in the text box. How to doWhen you are using module pool programming,
handle the push button function code in the PAI module and make sure the text field is updated whenever that function code for push button gets executed.
And one more thing is that make sure you set the next screen to the same screen number because after executing the function code then again it has to go back to the PBO of that screen for displaying the text field.
For inital display, the text field is displayed blank and it is filled when that function code is executed.
Regards,
Balaji Reddy G
Note:Please reward if the answers are helpful -
Hi,
I have a internal table T. when the t-zuonr is blank, the ALV look like:
t-zuonr document no data
200630303 AB 2007.08.31
200627855 AB 2007.06.30
200627887 AB 2007.06.30
MSFT047/07 93631164 RV 2007.10.19
MSFT061/07 93594484 RV 2007.10.09
MSFT061/07 93594485 RV 2007.10.09
MSFT061/07 93594486 RV 2007.10.09
MSFT061/07 93594487 RV 2007.10.09
MSFT061/07 93594488 RV 2007.10.09
MSFT061/07 93594489 RV 2007.10.09
MSFT061/07 93594490 RV 2007.10.09
*I need to not show the company which t-zuonr is space.
How can I write the code?*
The original source code is as following:
SORT t.
LOOP AT t.
AT NEW bukrs.
CLEAR anz_dl.
CLEAR htext-anzahl.
CLEAR htext-datei.
htext-text1 = ' records writen in file '.
CLEAR p_pfad.
CONCATENATE
i_pfad
'CU_CC'
t-bukrs
sy-datum+6(2)
sy-datum+4(2)
sy-datum(4)
sy-uzeit
'.txt'
INTO p_pfad.
CLEAR outtab.
REFRESH outtab.
REFRESH: gt_outalv. "INS MG020207
ENDAT.
IF t-shkzg = 'H'.
h_betrg = t-wrbtr * -1.
ELSE.
h_betrg = t-wrbtr.
h_dmbtr = t-dmbtr.
ENDIF.
s-filler1 = s-filler2 = s-filler3 = s-filler4 = s-filler5 = ';'.
s-filler6 = s-filler7 = s-filler8 = ';'.
s-filler9 = s-filler10 = s-filler11 = s-filler12 = s-filler13 = ';'.
s-filler14 = ';'.
s-belnr = t-belnr.
IF t-xblnr NE space. "WD041005a
s-xblnr = t-xblnr. "WD041005a
ELSE. "WD041005a
s-xblnr = t-belnr. "WD041005a
ENDIF. "WD041005a
WHILE s-xblnr(1) EQ '0'. "INS MG130606
SHIFT s-xblnr LEFT. "INS MG130606
ENDWHILE. "INS MG130606
*<<< CR01 CHANGE START BY LI_Y 2008/01/10
IF t-waers = 'JPY'.
h_dmbtr = h_dmbtr.
else.
h_dmbtr = h_dmbtr * 100.
endif.
*>>> CR01 CHANGE END BY LI_Y 2008/01/10
WRITE t-kunnr TO s-kunnr NO-ZERO.
s-lifn2 = s-kunnr.
shift s-lifn2 RIGHT.
s-lifn2(1) = 'R'.
S-KUNNR = T-KUNNR+5(5).
s-bldat+2(1) = '/'.
s-bldat+5(1) = '/'.
s-bldat0(2) = t-bldat4(2).
s-bldat3(2) = t-bldat6(2).
s-bldat6(4) = t-bldat0(4).
s-budat+2(1) = '/'.
s-budat+5(1) = '/'.
s-budat0(2) = t-budat4(2).
s-budat3(2) = t-budat6(2).
s-budat6(4) = t-budat0(4).
s-netdt+2(1) = '/'.
s-netdt+5(1) = '/'.
s-netdt0(2) = t-netdt4(2).
s-netdt3(2) = t-netdt6(2).
s-netdt6(4) = t-netdt0(4).
s-waers = t-waers.
s-dmbtr = t-dmbtr.
s-sgtxt = t-sgtxt.
CLEAR s-twaer.
SELECT SINGLE waers INTO s-twaer
FROM t001
WHERE bukrs = t-bukrs.
IF h_betrg < 0.
hs_betrg+0(1) = '-'.
ELSE.
hs_betrg+0(1) = ' '.
ENDIF.
WRITE h_betrg CURRENCY t-waers TO hs_betrg+1 NO-GROUPING
NO-SIGN
LEFT-JUSTIFIED.
REPLACE ',' WITH '.' INTO hs_betrg.
WRITE hs_betrg TO s-betrg.
IF h_dmbtr < 0.
hs_betrg+0(1) = '-'.
ELSE.
hs_betrg+0(1) = ' '.
ENDIF.
WRITE h_dmbtr CURRENCY t-waers TO hs_betrg+1 NO-GROUPING
NO-SIGN
LEFT-JUSTIFIED.
REPLACE ',' WITH '.' INTO hs_betrg.
WRITE hs_betrg TO s-dmbtr.
s-compcode = t-bukrs. "fw070905
IF p_downl = 'X'.
MOVE s TO outtab-s.
APPEND outtab.
ADD 1 TO anz_dl.
ENDIF.
gs_outalv-belnr = s-belnr. "INS MG020207
*<<<< CR01 START CHANGE BY LI_Y 2007/12/24 " ADD as_outalv-zuonr
gs_outalv-zuonr = s-zuonr. "CR01
*>>>> CR01 EDD CHANGE BY LI_Y 2007/12/24 "ADD as_outalv-zuonr
gs_outalv-kunnr = s-kunnr. "INS MG020207
gs_outalv-bldat = s-bldat. "INS MG020207
gs_outalv-netdt = s-netdt. "INS MG020207
gs_outalv-betrg = s-betrg. "INS MG020207
gs_outalv-waers = s-waers. "INS MG020207
gs_outalv-compcode = s-compcode. "INS MG020207
gs_outalv-budat = s-budat. "INS MG020207
gs_outalv-sgtxt = s-sgtxt.
gs_outalv-kmmnt = s-kmmnt.
gs_outalv-vbeln = s-vbeln.
gs_outalv-xblnr = s-xblnr.
gs_outalv-lifn2 = s-lifn2.
gs_outalv-dmbtr = s-dmbtr.
gs_outalv-twaer = s-twaer.
APPEND gs_outalv TO gt_outalv. "INS MG020207
AT END OF bukrs.
WRITE anz_dl TO htext-anzahl.
WRITE p_pfad TO htext-datei.
CONDENSE htext.
*<<<< CR01 START CHANGE BY LI_Y 2007/12/24
WA_SORT-fieldname = 'BELNR'. " speicfy field name..
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO I_SORT.
Thank you!!Hi,
Do this. Declare another internal table of identical structure as table t say t1.
REFRESH t1.
APPEND LINES OF t TO t1.
DELETE t1 WHERE zuonr IS INITIAL.
and then use t1 to display the ALV.
Hope this helps.
Regards,
Aditya -
How can i write the code in xml publisher desktop
hi all
How and where can i write the code in xml publisher desktop ???
shall i know how to write xml code or what ??
in which part can i write the code if i have more than one query ?hi dear
Thanks for ur replay...
What i mean is : i used to work on reports builder,so :
1- i used to create more than query in some reports.
2- create formulas ,procedures....
NOW i want to create the same reports by using xml publisher desktop, so how can i do that...
when i use {color:#ff0000}report wizard{color}, i can not or i don`t know how to use more than one query, create formulas or procedures.
Please help me.
Thanks again. -
Architecture question...where to put the code
Newbie here, so please be gentle and explicit (no detail is
too much to give or insulting to me).
I'm hoping one of you architecture/design gurus can help me
with this. I am trying to use good principals of design and not
have code scattered all over the place and also use OO as much as
possible. Therefore I would appreciate very much some advice on
best practices/good design for the following situation.
On my main timeline I have a frame where I instantiate all my
objects. These objects refer to movieClips and textFields etc. that
are on a content frame on that timeline. I have all the
instantiation code in a function called initialize() which I call
from the content frame. All this works just fine. One of the
objects on the content frame is a movieClip which I allow the user
to go forward and backward in using some navigation controls.
Again, the object that manages all that is instantiated on the main
timeline in the initialize() function and works fine too. So here's
my question. I would like to add some interactive objects on some
of the frames of the movieClip I allow the user to navigate forward
and backward in (lets call it NavClip) . For example on frame 1 I
might have a button, on frame 2 and 3 nothing, on frame 4 maybe a
clip I allow the user to drag around etc. So I thought I would add
a layer to NavClip where I will have key frames and put the various
interactive assets on the appropriate key frames. So now I don't
know where to put the code that instantiates these objects (i.e.
the objects that know how to deal with the events and such for each
of these interactive assets). I tried putting the code on my main
timeline, but realized that I can't address the interactive assets
until the NavClip is on the frame that holds the particular asset.
I'm trying not to sprinkle code all over the place, so what do I
do? I thought I might be able to address the assets by just
providing a name for the asset and not a reference to the asset
itself, and then address the asset that way (i.e.
NavClip["interactive_mc"] instead of NavClip.interactive_mc), but
then I thought that's not good since I think there is no type
checking when you use the NavClip["interactive_mc"] form.
I hope I'm not being too dim a bulb on this and have missed
something really obvious. Thanks in advance to anyone who can help
me use a best practice.1. First of all, the code should be:
var myDraggable:Draggable=new Draggable(myClip_mc);
myDraggable.initDrag();
Where initDrag() is defined in the Draggable class. When you
start coding functions on the timeline... that's asking for
problems.
>>Do I wind up with another object each time this
function is called
Well, no, but. That would totally depend on the code in the
(Draggable) class. Let's say you would have a private static var
counter (private static, so a class property instead of an instance
property) and you would increment that counter using a
setInterval(). The second time you enter the frame and create a new
Draggable object... the counter starts at the last value of the
'old' object. So, you don't get another object with your function
literal but you still end up with a faulty program. And the same
goes for listener objects that are not removed, tweens that are
running and so on.
The destroy() method in a custom class (=object, I can't
stress that enough...) needs to do the cleanup, removing anything
you don't need anymore.
2. if myDraggable != undefined
You shouldn't be using that, period. If you don't need the
asset anymore, delete it using the destroy() method. Again, if you
want to make sure only one instance of a custom object is alive,
use the Singleton design pattern. To elaborate on inheritance:
define the Draggable class (class Draggable extends MovieClip) and
connect it to the myClip_mc using the linkage identifier in the
library). In the Draggable class you can define a function unOnLoad
(an event fired when myClip_mc is removed using
myClip_mc.removeMovieClip()...) and do the cleanup there.
3. A destroy() method performs a cleanup of any assets we
don't need anymore to make sure we don't end up with all kinds of
stuff hanging around in the memory. When you extend the MovieClip
Class you can (additionally) use the onUnLoad event. And with the
code you posted, no it wouldn't delete the myClip_mc unless you
program it to do so. -
Can i write the code of flash player
i am a web design,i want to put a flash player on my website.how can i do it?or write the code ??
Hi dan lisa,
please have a look at my little example I made sometimes, where I offered the visitor the link to download the flash player (I put in in a table, so you can see it better): http://www.goldschmiede-blumberg.de/AdobTest/flv/flv1.html
Hans-G. -
How can we write the code for opening the command prompt and closing the
how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)
rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)? -
How to write the code to send the report output to the local file.
dear all,
how to write the code to send the report output to the local file.
Thanks & Regards,
Jyothi.Hi,
Try this , it will display report and download the file as well. Just vhange the path and execute
TYPE-POOLS : SLIS.
DATA : IT_SCARR TYPE TABLE OF SCARR,
IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECT *
FROM SCARR
INTO TABLE IT_SCARR.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
* I_INTERNAL_TABNAME =
I_STRUCTURE_NAME = 'SCARR'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FCAT
* EXCEPTIONS
* INCONSISTENT_INTERFACE = 1
* PROGRAM_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_STRUCTURE_NAME =
* IS_LAYOUT =
IT_FIELDCAT = IT_FCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IR_SALV_LIST_ADAPTER =
* IT_EXCEPT_QINFO =
* I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_SCARR
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
* BIN_FILESIZE =
FILENAME = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
* FILETYPE = 'ASC'
* APPEND = SPACE
* WRITE_FIELD_SEPARATOR = SPACE
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = SPACE
* WRITE_LF = 'X'
* COL_SELECT = SPACE
* COL_SELECT_MASK = SPACE
* DAT_MODE = SPACE
* CONFIRM_OVERWRITE = SPACE
* NO_AUTH_CHECK = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = SPACE
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
* FILELENGTH =
CHANGING
DATA_TAB = IT_SCARR
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* NOT_SUPPORTED_BY_GUI = 22
* ERROR_NO_GUI = 23
* others = 24
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
DOCUMENT = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
* APPLICATION =
* PARAMETER =
* DEFAULT_DIRECTORY =
* MAXIMIZED =
* MINIMIZED =
* SYNCHRONOUS =
* OPERATION = 'OPEN'
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* BAD_PARAMETER = 3
* FILE_NOT_FOUND = 4
* PATH_NOT_FOUND = 5
* FILE_EXTENSION_UNKNOWN = 6
* ERROR_EXECUTE_FAILED = 7
* SYNCHRONOUS_FAILED = 8
* NOT_SUPPORTED_BY_GUI = 9
* others = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
I have Photoshop CS6, Windows 7, I have no entry at the accesscode. When i will write the code into the nummeric fields. I can write only numbers, but no letters. What can I do?
If you are talking about the serial number, as far as I know serial numbers are entirely numeric so there is no need to enter letters. Maybe you are using the incorrect code.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
I write the code like this ...i didn't get output properly
Hi Experts,
I write the code like this ...i didn't get output properly......the selected file name is not copied to v_fname........
Points will be rewared...
tables : kna1.
parameters : P_FNAME type rlgrap-filename.
data : v_fname(200) type c . "lower case.
data : begin of itab occurs 0,
kunnr type kna1-kunnr ,
end of itab .
select kunnr from kna1 into table itab up to 50 rows .
at selection-screen on value-request for P_FNAME .
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = v_fname
STATIC = ' '
MASK = ' '
CHANGING
FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = 'v_fname'
FILENAME =
FILETYPE = 'ASC'
TABLES
DATA_TAB = ITAB
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.You are exporting field v_fname, not importing it. The field v_fname isn't for the file name anyway; field p_fname is for the file name. You also need to pass your file name to the function module GUI_DOWNLOAD for it to work.
- April King -
HAVE iTunes GIFT CARD--WHERE/WHEN IS THE CODE ENTERED?
HAVE iTunes GIFT CARD--WHERE/WHEN IS THE CODE ENTERED?
Disregard. found the convenient redemption link
and already credited my account -
Where to write connection code?
Hai,
In Flex,where we have to write the stratus connection code?
Is it outside the script or inside?you can download some samples to see how to build a application to connect
to stratus.
use
<mx:Script >
<![CDATA[
// action script code here
]]>
</mx:Script>
to write your as3 code
or just
<mx:Script source="yourAScodeFile.as"/>
and write your code in yourAScodeFIle.as.
e.g.
//I don't use debug ver so I use Alert.show() instead of trace();
myapp.mxml
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
creationComplete="connect()">
<mx:Script source="myapp.as"/>
<mx:Button id="conn" label="connect" click="connect"/>
</mx:Application>
myapp.as
import flash.events.NetStatusEvent;
import flash.net.NetConnection;
import mx.controls.Alert;
private const StratusAddress:String = "rtmfp://stratus.adobe.com";
private const DeveloperKey:String = "yourDevelopKey";
private var nc:NetConnection;
private function connect():void
nc = new NetConnection();
nc.addEventListener(NetStatusEvent.NET_STATUS,netConnectionHandler);
nc.connect(StratusAddress + "/" + DeveloperKey);
private function netConnectionHandler(event:NetStatusEvent):void
Alert.show(event.info.code,"info code");
Alert.show(nc.nearID,"peer id"); -
How to write the code for IMPORT and export in Field exit
Hi,
Using the FB01 tcode with condition as document type (ZF) and company code
i want to substitute values should come in the next screen.
i am passin the document type and the company code in the FB01 initial screen (100) and added field exit for Cost centre.
if the Doc type ZF and company code is 0245 then the field exit shoul trigger and give the defaul cost centre value if it contain any cost centre valu it over write the existing if it is empty i will write the defauls cost centre value.
Thanks & Regards,
Nelsons......Hi,
As i have understood, if ur doc type is ZF and company code is 0245, then you want to pass the value to cost centre field in next screen.
You can use program RSMODPRF. here enter the data element of cost centre field and assign the screen no and program name (for FI docs prg name would be SAPMF05A).
After assigning program and screen no , Create the function module where u have to write an 'if' statement for assigning value to cost centre (i.e export field in FM)
the values for company code and document type can be fetched from their respective parameter ids i.e. BUK and BAR.
Regards,
Seema Jaisinghani -
How to write the code for a panel when using treeview?
Hi,
We are developing a new plug-in in Indesign as based on treeview. we have completed the design part, but we have some doubts in coding..
One dialog widget and three panels(General, fitting, Eventsandscripts).
The .fr file:
resource GeneralPanelWidget (kGeneralPanelResourceID)
__FILE__, __LINE__,
kGeneralPanelWidgetID, // WidgetId
kPMRsrcID_None, // RsrcId
kBindNone, // Frame binding
Frame(0,0,800,500) // Frame
kTrue, // Visible
kTrue, // Enabled
kGeneralPanelTitleKey, // Panel name
StaticTextWidget
kInvalidWidgetID, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 15, 138, 35, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefProjectPathStringKey, // Initial text.
ksamPrefProjectPathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefProjectPathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 15, 420, 35), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseProjectButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 15, 500, 35,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 45, 138, 65, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefImagePathStringKey, // Initial text.
ksamPrefImagePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefImagePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 45, 420, 65), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseImgpathButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 45, 500, 65,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 75, 138, 95, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefMasterTempPathStringKey, // Initial text.
ksamPrefMasterTemplatePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefMasterTemplatePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame 85
Frame(140, 75, 420, 95), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseMasterTempButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 75, 500, 95,
kTrue, kTrue,
ksamChooseBtnStringKey,
CheckBoxWidget
ksamShowFrameLabelCheckBoxWidgetID, // WidgetId
kSysCheckBoxPMRsrcId, // RsrcId
kBindNone,
Frame( 10, 165, 320, 185) // left, top, right, bottom
kTrue, // Visible
kTrue, // Enabled
kAlignLeft, // Alignment
ksamShowFrameLabelChkBoxTextKey // Initial text
DefaultButtonWidget
kOKButtonWidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
320, 380, 390, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefSaveStringKey, // Button text
CancelButtonWidget
kCancelButton_WidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
400, 380, 470, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefCancelStringKey, // Button name
kTrue, // Change to Reset on option-click.
This is for General panel design and we have written the code for this..but we dont know where to call this functions. we implemented this plug-in based on BasicSelectableDialog sample plug-in. please guide me to complete this code.
Thanks in Advance..Your question is not very clear. Have you gone through the PanelTreeView.sdk example in the sdk?
-
User exit function module include how to write the code
hi all,
i am creating user exit for ME22N using this enhance MM06E005 .
in this i created subscreen and set some fields .
that data has to be stoe in EKPO.
inside the include i have to write the logic plz guide me how to follow .
once i enter it will store on wish internal table and wish internal table to shall i move to EKPO .
If Tcode is ME23N how to display data in disable mode.
Regards,
Hari.This is the code inside the function module .
once i enter data in custom field the below wish table it will store.
FUNCTION EXIT_SAPMM06E_016.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_EKPO) LIKE EKPO STRUCTURE EKPO
*" VALUE(I_AKTYP)
*" VALUE(I_CI_EKPO) LIKE EKPO_CI STRUCTURE EKPO_CI
*" VALUE(I_BSTYP) LIKE EKKO-BSTYP
*" VALUE(I_NO_SCREEN)
*" VALUE(I_LFA1) LIKE LFA1 STRUCTURE LFA1
*" VALUE(I_LFM1) LIKE LFM1 STRUCTURE LFM1
*" VALUE(I_EKKO) LIKE EKKO STRUCTURE EKKO
*" VALUE(I_REKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_KEKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_AEKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_REBAN) LIKE EBAN STRUCTURE EBAN OPTIONAL
*" VALUE(I_MT06E) LIKE MT06E STRUCTURE MT06E OPTIONAL
*" VALUE(I_EINA) LIKE EINA STRUCTURE EINA OPTIONAL
*" VALUE(I_EINE) LIKE EINE STRUCTURE EINE OPTIONAL
*" VALUE(I_EKPO_OLD) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_KOMP) LIKE KOMP STRUCTURE KOMP OPTIONAL
*" VALUE(I_ENJ_CALL) OPTIONAL
*" TABLES
*" TEKPO STRUCTURE BEKPO OPTIONAL
*" TEKET STRUCTURE BEKET OPTIONAL
*" TEKKN STRUCTURE EKKNU OPTIONAL
*" TKOMV STRUCTURE KOMV OPTIONAL
INCLUDE ZXM06U41 .
ENDFUNCTION.
inside the INCLUDE ZXM06U41 . i writen this code
*& Include ZXM06U41
DATA :
FS_EKPO TYPE EKPO_CI.
IF ( SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'
OR SY-TCODE EQ 'ME22' OR SY-TCODE EQ 'ME23' ) .
LOOP AT TEKPO.
IF ( TEKPO-EBELN EQ i_EKPO-EBELN
AND TEKPO-EBELP EQ i_EKPO-EBELP ) .
EKPO_CI-ZMATERIAL = TEKPO-ZMATERIAL.
EKPO_CI-ZQUANTITY = TEKPO-ZQUANTITY.
EKPO_CI-ZUNIT = TEKPO-ZUNIT.
EKPO_CI-ZPRICE = TEKPO-ZPRICE.
EKPO_CI-ZCURRENCY = TEKPO-ZCURRENCY.
ENDIF.
ENDLOOP.
ENDIF.
Regards,
Hari.
Maybe you are looking for
-
Creation Of Custom Directory Tree
Hi My client has a requirement of creating multiple realms. The first Realm should contain the standard DIT which is installed as a part of the OID installation. The second Realm should contain only the Custom dit which the client has created. but th
-
Helo community: We have created a new object ("8C - job family") , this object is a copy of object "C" job, we have done the customizing, for example in table: T778O and we have filled it with: 8C Familia de Funciones PDOTYPE_C ICON_ISO_
-
How to write elements line bye line in xml?
Hi Everyone, Can anyone of u tell me how to write the elements line by line into xml ? <username>thilothama</username> <password>pwd1</password><username>Talam</username> into <username>thilothama</username> <password>pwd1</password> <
-
My history keeps deleting itself. How do I prevent this?
I went to the options tab and private browsing is not on. The box about clearing history every time I exit isn't checked. Every thing is the same, except my history just automatically deletes itself. I don't know what happened.
-
Hi Extraction is getting terminated with red status (0 for 0 records). The message in the status tab is: Non-updated Idocs found in Source System Diagnosis IDocs were found in the ALE inbox for Source System that are not updated. Processing is overd