How to write elements line bye line in xml?
Hi Everyone,
Can anyone of u tell me how to write the elements line by line into xml ?
<username>thilothama</username> <password>pwd1</password><username>Talam</username>
into <username>thilothama</username>
<password>pwd1</password>
<username>test</username>
thanks
thilothama
How do you print it today? Without knowing that, the answer is probably "add a \n in the right place"...
Similar Messages
-
How to write on a new line ("\n") to a file
I dont know how to write on a new line ... this method writes everything in long line. I tried doing pS.println("\n") before the pS.println(buffer.toString());
Some one please direct me :)
public void WriteToFile() {
try {
byte[] record = new byte[100];
ByteArrayInputStream iS = new ByteArrayInputStream(record);
DataInputStream iDS = new DataInputStream(iS);
StringBuffer buffer = new StringBuffer();
OutputConnection connection = (OutputConnection)
Connector.open("file:///CFCard/readme.txt");
OutputStream oS = connection.openOutputStream();
PrintStream pS = new PrintStream( oS );
try {
for(int x=1; x<=rs.getNumRecords();x++) {
rs.getRecord(x, record, 0);
buffer.append(iDS.readUTF());
buffer.append(iDS.readUTF());
buffer.append(iDS.readInt());
buffer.append(iDS.readInt());
buffer.append("\n");
pS.println("\n");
pS.println(buffer.toString());
iS.reset();
oS.close();
connection.close();
iS.close();
iDS.close();
catch(ConnectionNotFoundException err) {
Alert alert = new Alert("Error", "Cannot access file.", null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
catch(IOException err) {
Alert alert = new Alert("Error", err.toString(), null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
Alert alr = new Alert("Completed Sending to a File", "Data written successfully!",null,null);
alr.setTimeout(Alert.FOREVER);
alr.setType(AlertType.WARNING);
display.setCurrent(alr);
}catch(Exception err) {
}Stinkin' crossposter
http://forum.java.sun.com/thread.jspa?threadID=613784 -
How to write adapter module to convert the xml to pdf file
Hi all,
how to write adapter module to convert the xml to pdf file.
Please any body assist step by step procedure.PI 7.1 XML to PDF transformation
have you seen below links:
http://forums.sdn.sap.com/thread.jspa?threadID=1212478
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14363 -
How to write a function read line from a file in FDK?
Hello,
I want to write a function that can read a file in line by line in FDK. How do I write it. If FDK could not. Is there any the way? Please help.
Thank you,
Thai NguyenThai,
You can use the "channel" functions for this. I'm far from an expert on channel programming but I've read files line-by-line successfully by going one character at a time, looking for a carriage return.
You can open up the file channel with something like:
ChannelT chan;
FilePathT *path;
UCharT ptr[1];
IntT numRead;
path = F_PathNameToFilePath("C:\\temp\\mydoc.txt", NULL, FDefaultPath);
if((chan = F_ChannelOpen(path,"r")) == NULL)
return;
//read the first character
numRead = F_ChannelRead(ptr, sizeof(UCharT), 1, chan);
...then you can call F_ChannelRead iteratively to build the string in a buffer, looking for a carriage return (ASCII 13) and stopping there. (that is, ptr[0] == 13).
There might be a better way. This is just the way I've gotten it to work. It probably is not a good method for unicode files.
Russ -
HOW TO WRITE STANDARD TEXT IN LINE LINE
1)LINE
2)LINE
LIKE THIShiii
if you want to write same in standard text then you just need to press enter you will get second line & you can write there.it will come in next line only..in SO10 you will get the same screen for writing as you hav in SAP script.so new line is also there.or just press enter.& yaa if you want to use outline there then for particular variables or automated data you can use outline type.so number will be generated automaticaly.for this you will get help in help.sap.
regards
twinkal
Edited by: twinkal patel on Jul 7, 2008 10:39 AM -
How to write data in differt line in .txt file
Hi all,
I am tring to write data on one file using utl_file,
the first cursor loop write data on first line of the file using
utl_file.put_line(..........................);
end the second cusor loop write the data on secion line of the same file using
utl_file.put_line(..........................);
file format we are given as .txt;
problem we are facing is when we open the file in notepad all the data is showing in one line...
same file if we open another tools like edit plus, word pad etc it showing the write formate( line by line)
Can any one help on this we need to set any setups in note pad????????????/As others have said it sounds like an operating system difference.
If your Oracle is installed on a unix based server then the file will be written using Unix style newlines which are just Line Feed characters.
In Windows environments a newline is considered to be made of the Carriage Return/Line Feed character pair, not just the Line Feed.
Some applications such as MS Word or Wordpad can read Unix style linefeeds and interpret them as you expect as a Newline. However Notepad doesn't.
When you transfer the file from Unix to Windows, usually this is done using an FTP based mechanism. If you transfer the files using FTP Binary mode, then every byte of the file is transferred as it is on Unix, and the file will essentially be a unix file on a windows system. If, however, you transfer the files (from Unix to Windows) using FTP ASCII mode, then whenever FTP encounters a LineFeed character it will convert it to a Carriage Return/LineFeed pair of characters, so that the file will appear correctly in Notepad. Likewise if you transfer files from Windows to Unix in ASCII mode, then Carriage Return/LineFeed pairs of characters are converted to just a LineFeed character so that the file becomes Unix compatible. Note, you shouldn't transfer binary files in ASCII mode as it can corrupt them, it's only intented for text based files. -
How to write on new a line in "Comments"
For things such as photos and folders, if we click "Get info", we can write in an input area called Comments.
I am inputing a lot of information and I need to have paragraphs or starting on new lines to make things more tidy. How can I start writing on a new line?
If this is not allowed by the system, how should I separate the information? Should I use "," or ";" or "/" or something else?
Many thanksIt looks like Control + Enter once can do the job already. iW00 comment comes first in the order, although both comments have the same created time being displayed. I will choose their comment as the solution. Many thanks.
To other people with the same question, both ALT + Enter and Control + Enter can make you start at a new line. -
How to write select statement in XSL-FO type XML program
Hi All,
Could you please anyone explain briefly how to write select statement in XSL-FO XML Program.
Requirement:
In the seeded program, OAF page is creating one XML file and through XSL-FO type XML Pulisher loading data and generating PDF output. as per the requirement some of the informations are missing in the XML file and for modifing the OAF page will be taking someting. we are planing to write a select query inside the XSL-FO program to get the required information.
Could you please help me how to write a select statement inside the XSL-FO type programs.
Please give me some example program for this...
Thanks in Advance.
Regards,
SenthilHi ,
Please check the below code and modified plant as select-option
Check the below code :
tables : mara,
mast.
data : begin of i_data occurs 0,
matnr like mara-matnr,
end of i_data.
select-options : s_matnr for mara-matnr,
<b>S_werks for mast-werks.</b>
start-of-selection.
select a~matnr into table i_data
from mara as a inner join mast as b on amatnr = bmatnr
where <b>b~werks in s_werks</b>
and a~matnr in s_matnr
and a~mtart = 'AA'
or a~mtart = 'UT'
and b~stlan = '1'.
loop at i_data.
write:/ i_data-matnr.
endloop.
Hope you got it.
Thanks
Seshu -
Bursting program how to add if conditions in the bursting xml
Hi ,
We use xml publisher bursting to send the po prints to vendors .
We converted the oracle report and create a template and bursting file to now send the pdf po print to vendors .
In some cases where the vendor site delivery method is not set to EMAIL and it is null or EDI we wanted to send the po print to requestor ..
We can get the email address of vendor site in Deliver_TO_EMAIL field and requestor email in Requestor_email fields and delivery method in DELIVERY_METHOD field
How to write a logic in the Bursting xml like
if
DELIVERY_METHOD IS NULL OR EDI THEN
use requestor_email as email
change the body of the email
if
delivery_method is email then
user the email as del_email_address
body of the email will address to vendor.
if
deliver_method is email but email_address is null then
user the requestor email address and change the email body accordingly ..
currently we have one logic in the burting file as below ...how to write the if logic in this ?
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XXC_PO_STD/LIST_G_HEADER_INFO/G_HEADER_INFO">
<xapi:delivery>
<xapi:email id="email" server="xxx.xxxx.com" port="25" from="[email protected]" reply-to ="">
<xapi:message id="email" to="${DEL_EMAIL_ADDRESS}" cc="[email protected]" attachment="true" subject=" Standard Purchase Order. ${PO_NUM}-${PO_REVISION_NUM}">
Please Take Necessary Action.
Thank You,
XXXXXX Purchasing Team
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Purchase Order ${PO_NUM}-${PO_REVISION_NUM}" output-type="pdf" delivery="email">
<xapi:template type="rtf" location="xdo://XXC.XXC_PO_STD.en.US/?getSource=true"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
--ChandraPlease ignore ..
I created the logic in the report query itself and it worked .
--Chandra -
I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?
Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush -
How to write empty line in text file
hey
i want to insert one empty line in text file.
how to write this.
i declared
data: emptyrec(240) type c value space,
and used
TRANSFER emptyrec to e_file.
but its not inserting empty line in the record.
is there any special way have to do.
ambichan.hai anand,
I am posting the code snippet.
i have commented that transfer line in '----
' like this
pls refer below.
ambichan
DATA: PAGENO(4) TYPE N VALUE 1,
DATAKBN(2) TYPE N VALUE 1,
SUBNO(3) TYPE N VALUE 1,
VPAGENO(4) TYPE C,
VDATAKBN(2) TYPE C,
VSUBNO(3) TYPE C,
VREC(255) TYPE C,
VRECORD(255) TYPE C,
EMPTYREC(255) TYPE C VALUE SPACE,
VCODE(10) TYPE C,
VNAME2(35) TYPE C,
VPAYDAT(10) TYPE C,
VSGTXT(60) TYPE C VALUE SPACE,
VSGTXT1(10) TYPE C,
VKINGAKU(15) TYPE C VALUE SPACE,
VBIKKO(30) TYPE C VALUE SPACE,
VBELNR(10) TYPE C VALUE SPACE,
VDMBTR(15) TYPE C,
VGLT0-KSLVT(15) TYPE C,
VGLT0-TSL01(15) TYPE C,
VGLT0-TSL02(15) TYPE C,
VGLT0-TSL03(15) TYPE C,
VGLT0-TSL04(15) TYPE C,
VGLT0-TSL05(15) TYPE C,
VKIN(15) TYPE C,
VTEGA(15) TYPE C.
FORM FRM_OUTPUT_DATA.
SORT ITAB_OUTPUT_SUMMARY BY LIFNR DTYPE.
SORT ITAB_OUTPUT_ITEMS BY LIFNR DTYPE BELNR.
IF P_DISP = 'X'."checkボクスを選ぶ場合、ファイル作成処理へ行く
OPEN DATASET E_FILE FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC <> 0.
WRITE: 'error',SY-SUBRC.
EXIT.
ENDIF.
LOOP AT ITAB_LIFNR.
PERFORM LISTDATA.
PAGENO = PAGENO + 1.
SUBNO = 1.
ENDLOOP.
CLOSE DATASET E_FILE."ファイルクローズ
ENDFORM. " End of frm_output_data
FORM LISTDATA.
DATA:
WK_PAY_AMOUNT LIKE BSEG-DMBTR, " 純支払額算出用
VWK_PAY_AMOUNT(15) TYPE C,
GLT0-TSL05_VAL LIKE GLT0-TSL05.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 1.
BSIK-DMBTR = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
GLT0-TSL01 = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 2. " 区分:2
GLT0-TSL02 = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 3. " 区分:3
GLT0-TSL03 = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 4. " 区分:4
GLT0-TSL04 = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 5. " 区分:5
GLT0-TSL05 = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
glt0-tsl05 = glt0-tsl05 + glt0-tsl04.
WK_PAY_AMOUNT = GLT0-TSL05 + GLT0-TSL04.
CHECK WK_SUBRC = 0.
BSEG-KOART = ' '. 情報不要
CLEAR: BSEG-SGTXT, BSEG-DMBTR, TGSBT-GTEXT, BKPF-BELNR.
BSEG-KOART = 'Y'. " フラグ:ヘッダに相殺額を出力
CLEAR: BSAK-DMBTR.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 6. " 区分:6
BSAK-DMBTR = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
WK_PAY_AMOUNT = WK_PAY_AMOUNT - BSAK-DMBTR.
WRITE : / PAGENO,
SUBNO,
DATAKBN,
ITAB_LIFNR-LIFNR,
ITAB_LIFNR-NAME2(25),
P_PAY_T,
GLT0-TSL01,
GLT0-TSL02,
GLT0-TSL03,
GLT0-TSL04,
GLT0-TSL05.
VPAGENO = PAGENO.
VSUBNO = SUBNO.
DATAKBN = 1.
VDATAKBN = DATAKBN.
VCODE = ITAB_LIFNR-LIFNR.
VNAME2 = ITAB_LIFNR-NAME2.
VPAYDAT = P_PAY_T.
VGLT0-TSL01 = GLT0-TSL01.
VGLT0-TSL02 = GLT0-TSL02.
VGLT0-TSL03 = GLT0-TSL03.
VGLT0-TSL04 = GLT0-TSL04.
VGLT0-TSL05 = GLT0-TSL05.
CONCATENATE VPAGENO VSUBNO VDATAKBN VCODE VNAME2 VPAYDAT VSGTXT VKINGAKU
VBIKKO VBELNR VGLT0-TSL01 VGLT0-TSL02 VGLT0-TSL03
VGLT0-TSL04 VGLT0-TSL05 INTO VREC SEPARATED BY ','.
CLEAR: BSAK-DMBTR, BSID-DMBTR, BSAD-DMBTR, BSEG-DMBTR, BSIK-DMBTR,
WK_10 , WK_11 , GLT0-TSL05.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 7. " 区分:7
BSID-DMBTR = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
WK_PAY_AMOUNT = WK_PAY_AMOUNT - BSID-DMBTR.
郵送料の出力処理
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 8. " 区分:8
BSAD-DMBTR = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
WK_PAY_AMOUNT = WK_PAY_AMOUNT - BSAD-DMBTR.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 9. " 区分:9
BSEG-DMBTR = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
WK_PAY_AMOUNT = WK_PAY_AMOUNT - BSEG-DMBTR.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 10.
WK_10 = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
READ TABLE ITAB_OUTPUT_SUMMARY
WITH KEY LIFNR = ITAB_LIFNR-LIFNR DTYPE = 11.
WK_11 = ITAB_OUTPUT_SUMMARY-DMBTR * WK_RATIO.
GLT0-TSL05 = WK_PAY_AMOUNT - WK_10 - WK_11.
WK_PAY_AMOUNT = WK_PAY_AMOUNT - GLT0-TSL05.
VWK_PAY_AMOUNT = WK_PAY_AMOUNT.
VKIN = WK_10.
VTEGA = WK_11.
CONCATENATE VREC VWK_PAY_AMOUNT VKIN VTEGA INTO
VRECORD SEPARATED BY ','.
TRANSFER VRECORD TO E_FILE.
WRITE :
VWK_PAY_AMOUNT,
WK_10,
WK_11.
WRITE:/.
BSEG-KOART = 'X'. " フラグ:請求金額を出力
LOOP AT ITAB_OUTPUT_ITEMS WHERE LIFNR = ITAB_LIFNR-LIFNR
AND DTYPE = 5. " 区分:5
BSEG-SGTXT = ITAB_OUTPUT_ITEMS-SGTXT. " 明細テキスト
GLT0-KSLVT = ITAB_OUTPUT_ITEMS-DMBTR * WK_RATIO. " 金額
TGSBT-GTEXT = ITAB_OUTPUT_ITEMS-GTEXT. BKPF-BELNR = ITAB_OUTPUT_ITEMS-BELNR.
SUBNO = SUBNO + 1.
VSUBNO = SUBNO.
DATAKBN = 2.
VDATAKBN = DATAKBN.
VGLT0-KSLVT = GLT0-KSLVT.
VBIKKO = TGSBT-GTEXT.
VBELNR = BKPF-BELNR.
VSGTXT1 ='請求金額:'.
CLEAR VRECORD.
CONCATENATE VSGTXT1 BSEG-SGTXT INTO VSGTXT.
CONCATENATE VPAGENO VSUBNO VDATAKBN VCODE VNAME2 VPAYDAT VSGTXT
VGLT0-KSLVT VBIKKO VBELNR INTO VRECORD SEPARATED BY ','.
TRANSFER VRECORD TO E_FILE.
WRITE :/ VPAGENO,VSUBNO,VDATAKBN,'請求金額:', VSGTXT, VGLT0-KSLVT,
VBIKKO,VBELNR.
ENDLOOP.
CLEAR: BSEG-SGTXT,GLT0-KSLVT,BKPF-BELNR.
LOOP AT ITAB_OUTPUT_ITEMS WHERE LIFNR = ITAB_LIFNR-LIFNR
AND DTYPE = 6. " 区分:6
BSEG-SGTXT = ITAB_OUTPUT_ITEMS-SGTXT. " 明細テキスト
IF ITAB_OUTPUT_ITEMS-SHKZG = CNS_CREDIT. " 金額
GLT0-KSLVT = ITAB_OUTPUT_ITEMS-DMBTR * WK_RATIO.
ELSEIF ITAB_OUTPUT_ITEMS-SHKZG = CNS_DEBIT.
GLT0-KSLVT = ITAB_OUTPUT_ITEMS-DMBTR * WK_RATIO * -1.
ENDIF.
TGSBT-GTEXT = ITAB_OUTPUT_ITEMS-GTEXT. " 事業領域テキスト
BKPF-BELNR = ITAB_OUTPUT_ITEMS-BELNR. " 伝票番号
SUBNO = SUBNO + 1.
VSUBNO = SUBNO.
DATAKBN = 3.
VDATAKBN = DATAKBN.
VGLT0-KSLVT = GLT0-KSLVT.
VBIKKO = TGSBT-GTEXT.
VBELNR = BKPF-BELNR.
VSGTXT1 ='相殺金額:'.
CLEAR VRECORD.
CONCATENATE VSGTXT1 BSEG-SGTXT INTO VSGTXT.
CONCATENATE VPAGENO VSUBNO VDATAKBN VCODE VNAME2 VPAYDAT VSGTXT
VGLT0-KSLVT VBIKKO VBELNR INTO VRECORD SEPARATED BY ','.
TRANSFER VRECORD TO E_FILE.
concatenate vpageno vsubno vdatakbn
WRITE :/ PAGENO,SUBNO,DATAKBN,'相殺金額',BSEG-SGTXT, GLT0-KSLVT,
TGSBT-GTEXT, BKPF-BELNR.
ENDLOOP.
CLEAR VRECORD.
*Insert empty line.
TRANSFER EMPTYREC TO E_FILE.
DATAKBN = 3.
VDATAKBN = DATAKBN.
SUBNO = SUBNO + 1.
VSUBNO = SUBNO.
VSGTXT ='源泉金額'.
VDMBTR = BSID-DMBTR.
CONCATENATE VPAGENO VSUBNO VDATAKBN VCODE VNAME2 VPAYDAT VSGTXT
VDMBTR INTO VRECORD SEPARATED BY ','.
TRANSFER VRECORD TO E_FILE.
WRITE :/ PAGENO, SUBNO,DATAKBN, ITAB_LIFNR-LIFNR,ITAB_LIFNR-NAME2,
P_PAY_T,'源泉金額', BSID-DMBTR.
CLEAR: VDMBTR, VSGTXT, VRECORD.
SUBNO = SUBNO + 1.
VSUBNO = SUBNO.
VSGTXT = '郵送料'.
VDMBTR = BSAD-DMBTR.
CONCATENATE VPAGENO VSUBNO VDATAKBN VCODE VNAME2 VPAYDAT VSGTXT
VDMBTR INTO VRECORD SEPARATED BY ','.
TRANSFER VRECORD TO E_FILE.
WRITE :/ PAGENO, SUBNO,DATAKBN,ITAB_LIFNR-LIFNR,ITAB_LIFNR-NAME2,
P_PAY_T,'郵送料', BSAD-DMBTR.
CLEAR: VDMBTR, VSGTXT, VRECORD.
SUBNO = SUBNO + 1.
VSUBNO = SUBNO.
VSGTXT = '振込み手数料'.
VDMBTR = BSEG-DMBTR.
CONCATENATE VPAGENO VSUBNO VDATAKBN VCODE VNAME2 VPAYDAT VSGTXT
VDMBTR INTO VRECORD SEPARATED BY ','.
TRANSFER VRECORD TO E_FILE.
CLEAR: VDMBTR, VSGTXT, VRECORD.
WRITE :/ PAGENO,SUBNO,DATAKBN,ITAB_LIFNR-LIFNR,ITAB_LIFNR-NAME2,
P_PAY_T,'振込み手数料',BSEG-DMBTR.
*その他の支払いの処理
SUBNO = SUBNO + 1.
VSUBNO = SUBNO.
VSGTXT = 'その他の支払い'.
VDMBTR = GLT0-TSL05.
CONCATENATE VPAGENO VSUBNO VDATAKBN VCODE VNAME2 VPAYDAT VSGTXT
VDMBTR INTO VRECORD SEPARATED BY ','.
TRANSFER VRECORD TO E_FILE.
WRITE :/ PAGENO,SUBNO,DATAKBN,ITAB_LIFNR-LIFNR,ITAB_LIFNR-NAME2,
P_PAY_T, 'その他の支払い',GLT0-TSL05.
glt0-tsl05.
ULINE.
CLEAR: VREC, VRECORD,VCODE,VNAME2,VPAYDAT,VSGTXT,VSGTXT1,VKINGAKU.
CLEAR: VBIKKO,VBELNR,VDMBTR,VGLT0-KSLVT,VGLT0-TSL01,VGLT0-TSL02.
CLEAR: VGLT0-TSL03,VGLT0-TSL04,VGLT0-TSL05,VKIN,VTEGA,VWK_PAY_AMOUNT.
ENDFORM. -
How to write two item in the same line?
In the smartforms,how to write two item in the same line?
eg
1 ************* 2 *****************
3 ************** 4 ******************
5 ***************
Anyone got any idea to do this.
Thanks in advanceHi,
In the smartform the main windows is 20cm.I use the table output my data.Because the output is two item in same line,I define two rows in the table line type.
Question:
Should I define the table width 20cm?
In the main area of table , should I define two folders and each of folder include a line? The second item I had already defined as Append Directly,but the item 1 and item 2 don't in the same line.
Regards -
How to write an output of a VI/exe to command line before quitting
how to write an output of a VI/exe to command line or standard output before exiting the program
You can use "System Exec.vi" in the Communication pallete. (6.1 and 7.0)
Daniel L. Press
PrimeTest Corp.
www.primetest.com -
How to write new line to a File?
How to write new line to a file?
I have a string to be written to a file. the string contains "\n" in it. But why it is not showing the new line in the file.
I have tryed FileWriter class and FileOutputStream class, but none of them works?
any suggestion please...Probably using PrintStream::println() is a portable way.
import java.io.FileOutputStream;
import java.io.PrintStream;
public class NewLine {
public static void main(String[] args) {
try {
PrintStream ps = new PrintStream(new FileOutputStream("foo.txt"));
ps.write("string".getBytes());
ps.println();
ps.close();
} catch (java.io.IOException e) {
e.printStackTrace();
}Regards, -
How to write to a file with \n (new line)???
Hi there,
I have the following method that reads a file's content and convert it into a string:
public static String getFileContent(String fileName) throws IOException
File file = new File(fileName);
FileInputStream fileInputStream = new FileInputStream(file);
BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(fileInputStream));
StringBuffer stringBuffer = new StringBuffer();
String line;
while ( (line=bufferedReader.readLine()) != null )
stringBuffer.append(line+"\n");
return stringBuffer.toString();
}I'm trying to write a method that writes a String to a file WITH THE NEW LINE. All classes I used (DataOutputStream, FileWriter, PrintStream...) do not force a new line (I get everything in one line)
I thought maybe I should change the "\n" in the line
stringBuffer.append(line+"\n"); but...didn't know what.
thanks for any adviseBufferedReader readLine remove the newline sequence. But you're putting \n back which should do what you appear to want.
However newline sequence isn't always just \n, on unix systems it's \n, on windows its \r\n (reads "carriage-return, linefeed"). Sytem.getProperty("line.separator"); will get you the appropriate end of line string.
Maybe you are looking for
-
Hi all, I have a failover cluster Wiindows 2012 R2 server with file server. A few days ago, when users try to rename folders and the following error can not be appearing: "Could not find the item, this item is no longer here, check the location and t
-
HP Officejet Pro 8610 Terminal Printing
Hi i have installed Hp Officejet Pro 8610 on the machine 1 (32bit arch) and want to remote desktop connect to another machine 2(also 32bit arch) , I remote desktop with both local resources enabling all local devices and resources. When im remoted i
-
Nokia 5800xm bugs and nokia contact error . To all...
Hi , am really having a bad time after being a nokia customer all my life, now since n70, that was very great, came to n81, good but bad camera, but it was fast, no bugs, n95 8gb, bugs, starting with wgz, apps which go empty when u hold menu button a
-
Performance after inserting image in a table
Hi all, I have two tables in Oracle10gR1 database. One contains personal info and other their images with primary key foriegn key relation. Performance is ok. Now our requirment is that we have to incorporate the images in the personal info table its
-
Remotely changing System Preferences via Firewire?
Hi all, I've got an old mac mini and a new Mac book. The trick is, I've just moved overseas and don't have a monitor for the mini any longer. I have bought a cable to connect it to my tv, but I'm afraid the tv is too old, and won't play nice with the