Which adapter should use SOAP or http?

Hi SDners,
I have a one scenario in which I have to integrate our ECC system to our company intranet site. for this scenario what approch I have to take?
Please suggest
Regards

Hi Abhay,
I think you can use HTTP adapter in your case , there will be two modes url and http destination in channel configuration ,
you can choose to create HTTP Destination mode and create a RFC Destination in sm59
(HTTP Type=G).Here you mention your internal site connection details like parameter for
connections , user and password etc .By doing so, you can test the connection from XI to the url.
You can test the rfc connection in the test connection tab in RFC destination.If connection test
is ok then you can use this http destination in you http channel.
But if you question is to compare HTTP or SOAP , then as suggested above a simple search will
give best answers to your questions.
Regards,
Srinivas

Similar Messages

Which cable should use for Sony DV connect to iMac ?

Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
http://www.radtech.us/Products/ProCableFW400800.aspx
Links are to illustrate examples. You should be able to pick them up at most computer stores.

HT4341 which adapter is used in Israel?

which adapter is used in Israel? when reffering to world adapter kit?

Isreal use "H" type socket.
http://holytourist.blogsome.com/2008/07/14/electrical-power/
http://www.adaptelec.com/index.php?main_page=document_general_info&products_id=3 15

How to decide which adapter to use from IDOC and RFC?

Hi All,
When interating XI with an SAP system,
How to decide which adapter to use from IDOC and RFC?
Thanks.

Hi,
you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
Here some useful links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
XI: Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
More links for proxy:
proxies and performance...
Hope this help
Francesco

Please tell me for BAPI which adapter is used

Hi friends this is shalini, for BAPI's which adapter is used
i think RFC adapter is used it is correct or wrong.
please tell me friends.
Regards
Shalini shah

Shah,
Check this weblog for one of the integration on this:
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
Regards,
---Satish

Which Adapter to use - HTTP or SOAP Adapter?

Hi Experts,
The third party system will be sending a standard HTTP request with a standard SOAP envelope containing standard XML.
So in this case what adapter I should use HTTP or SOAP?
What is the difference between these two adapters and in which scenarios this should be used?
Thanks.

Hi,
The plain HTTP adapter gives application systems the option of communicating with the Integration Engine and exchanging business data using a plain HTTP connection. Depending on the receiver system, outbound messages can be enhanced with certain information.
The SOAP adapter enables you to exchange SOAP messages between remote clients or Web service
servers and the Integration Server or the PCK.
In the SOAP adapter, you can specify security settings to be used to sign/verify the SOAP body.
In addition, you can specify the standard to be used for signing/verifying the SOAP message
whenever Xi need to communicate with any sort of webservice i.e remote applications it uses SOAP adapter..
And XI uses HTTP adapter when you want to post a HTTP request message from a web application to XI.
HTTP Adapter :
1) HTTP Adapter is used by extenal systems to connect to Intergartin server using native HTTP Interface
2) http adapter is a service which is directly connected to integration engine
SOAP Adapter :
1)Allows Local Processing in AAE
2)Exaclty One Operation per Interface
3)Modules for Receiver Adapter
With regards,
Pinangshuk.

Which adapter to use to download data from site dynamically except file typ

hi,
I am to download data dynamically from a secure website to PI server without using file/FTP adapter and send it to any folder using PI.
(At receiver end i will use file adapter , Please suggest for sender side)
I will give user name and password to that site through PI.
Which adapter I should use at sender side?
At the same time I am to call an predefined RFC to trigger a Function module in SAP system.
How to do that?
Please help me out.
Response will be appreciated..
Thanks,
Jaideep

Hi
add "&sap-client=<client>&sap-user=<loginId>&sap-password=<password>" to your wsdl
like http://server:8000/sap/bc/srt/rfc/sap/webservice _ name?wsdl&sap-client=100&sap-user=andre&sap-password=123456
Regard's
Chetan Ahuja

Which adapter to use to integrate 2 instances of oracle apps 11.5.10

We are using Oracle application server 10g integration interconnect(iSTUDIO) to integrate two instances in oracle apps 11.5.10 for the purpose of implementing customer data hub. We are not sure which adapters to use for this pupose. Whether it will be
1. database adapters
2. oracle application adapter
3. Or any other adapters.
We have to use publish/subscribe messaging paradigm.
Any kind of help is welcome
Regards
Sourav Biswas

Soubi,
Yan is right but to add a bit more.
Consider 2 application instances APP1 and APP2.
If you install an OA (Oracle Apps) adapter into an OracleAS Oracle Home and point to APP1, you must use copyAdapter to "clone" another adapter of the same type (e.g. another OA adapter) for APP2. I don't think the copyAdapter script runs any of the post installation steps either so, you'll have to run the OAI schema scripts to create the OAI schema on APP2. See the post_installation.txt file for more information. This is in the adapter home directory.
If you install an OA adapter for APP1 and decide to install a DB adapter for APP2, you can use the installation media to install both.
However, if you decide (for whatever reason) to install an OA adapter and a DB adapter for APP1, you should be aware that the installation of the second adapter will drop and recreate the OAI schema for the spoke database. If you have been using one of the adapters before the second install this may cause you problems.
Regards,
David

Applet freezes requesting which cert should use for a SSL connection

Hello everyone,
I have a strange problem. Applet freezes when it request which certificate should it use to connect to the server through a SSL connection. It works fine if it does not show the "choose certificate" window.
I can not give more clues, but I am quite desperated and I hope you can help.

Hello everyone,
I have a strange problem. Applet freezes when it request which certificate should it use to connect to the server through a SSL connection. It works fine if it does not show the "choose certificate" window.
I can not give more clues, but I am quite desperated and I hope you can help.

Which method should use? Call Transaction or Session Method?

I need to upload 1,00,000 records then which method i need to use? Either session or call transaction?

Hi.....
A (asynchronous updating) The called transaction does not wait until the database has been
updated, it simply forward the updates to the SAP update service. This usually speeds up the CT
program. This processing mode is NOT recommended for large data sets as the called transaction
does not receive a completion message from the update module.
The calling CT program therefore cannot tell if the transaction has been successfully completed. You
should use the updating administration function (transaction SM13) to determine whether updating
was terminated early. The error analysis /correction functions for are less helpful than with
synchronous updating.
S (synchronous updating) With synchronous updating the called transaction waits until all the
updates have been completed. So processing is slower than with synchronous updating. The called
transaction can however report any updating errors to the program, which makes error
analysis/correction easier.
And
Unlike the classical batch input processing with sessions CALL TRANSACTION does not offer any
special processing procedures for transactions containing errors. There are no restart functions for
transactions that contain errors or that cause updating terminations.
Now you decide which one is best...
For large amount of data Sessions method is the better.
Thanks,
Naveen.I

ACF(Altinn Connection Framework): Message Posting using SOAP via HTTPS

Hello Experts,
Giving you the background , we have imported and configured interface content of ACF (Altinn Connection Framework) provided by SAP (service market place). which will basically integrate SAP HR system with Altinn (Norwegian TaX system). Sync Message will be always sent from HR system to PI and which will be sent to Altinn system via Receiver SOAP Adapter (as webservice call). The target URL of Altinn will be https:// eg https://www.altinn.no/AuthenticationExternal/SystemAuthentication.svc
its working as expected BUT * without importing any certificate of Altinn in PI STRUST or J2EE engine’s keystore. And Also we have not enabled HTTPS in PI.
My Question is on Security of the message flow.
* Since we are passing the message from PI (which is not HTTPS enabled) to Atinn System by calling Target HTTPS Webservice, whether this message is Secure ? if its secure how we can prove i ?
my doubt is as per the link help.sap link-HTTP and SSL it says "Both parties of an HTTP connection (that is, the HTTPS client and the HTTPS server) must be technically enabled."
but without enable the HTTPS in PI its working.
* we tried enabling the HTTPS in PI as per help.sap link-HTTP and SSL , but no were in the Trace which shows the message was sent from HTTPS port of PI to the target URL . if you know where I can find the trace of it ?
Regarding,
Danab.

Hi
Did you figure this out?
I am about to deploy this for a customer and have just read through the guide and I am also questioning the security part as well as how easily this is to implement on single stack - I guess I have to do configuration by hand.
Kind Regards,
Pernille

Which version should use

Hi,
I am really new to Java. Can some one give me some advice on how to start:
1) there are 2 version there 1.4 and ver 5 which one one I should start with?
2) which editer is better for Java
3) what else I need to prepared before start.
Thanks alot

Hi,
I am really new to Java. Can some one give me some
advice on how to start:
1) there are 2 version there 1.4 and ver 5 which one
one I should start with?
2) which editer is better for Java
3) what else I need to prepared before start.
Thanks alotHi,
Read "Your First Cup of Java":
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/
It will show you how to get everything installed correctly and how to run your first program.
At some point you will run into problems trying to set your "classpath", so bookmark this:
http://java.sun.com/j2se/1.3/docs/tooldocs/win32/classpath.html
Good luck. Getting everything setup on your pc correctly and learning how to compile and execute programs is a big barrier to entry with Java.

9iAS WE v2 Beta: which adapter to use for BC4J-UIX-XML components?

hi,
through official TAR i still have no answer after 3 weeks, so maybe someone here can help me out.
using Jdveloper 9i RC i create a BC4J-based client project (BC4J-UIX-XML components) which i want to use for wireless services. the only thing i know is that oracle recommends this framework. together with WE v2 we got more than 1000 pages of documentation, but nothing about the new adapters (the most important thing i believe, what else am i supposed to do as official beta tester?!!).
any piece of information about the new adapters (especially the oc4j-adapter) or any kind of examples are really appreciated.
TIA, trevi

automatic mode is just for quick demos. You cannot internationalize your application while using automatic mode.
You will need to turn off automatic mode, and have bc4j:column beans in your table and databind the data to come from your resource bundles.

A Pages document sent to another computer cannot reproduce the same format. Is there a process which we should use ?

A Pages document sent to another computer does not maintain the same format. Is there a process to ensure compatibility ??

JRP IV wrote:
I'm just trying to print my online pay stub
Since my printer isn't working, I'd like to save document to my desktop ("save as" is the only option given to me) and send it as an attachment to a friend's computer and working printer.
What browser are you using?
Are you trying to print or to save the doc? Whether you have a working printer or not is really immaterial. If you're trying to print, then File > Print > PDF > Save as PDF…. If the resulting PDF is small enough (<5MB, though my preference is <1MB), e-mail it to your pal. If it's too big, transfer it using a chat programme or a file service (MediaFire, RapidShare, etc).
Now, I am currently trying to send the document directly (via email, an option given under "file") the pay stub from my employer (who uses ADP online payroll services), to that computer and working printer ....and I'm receiving a window (with apple mail logo on it) that begins with "To view this page, you must log in to this area on agateway.adp.com:443:" and asks for "name" and "password". I've put in both ADP's information, and what I believe (could be very wrong) to be apple mail's information, and either/neither/nothing seems to work!
I don't understand any of this. You need to explain better—or perhaps just post a screen shot (blank any private or confidential info on it prior to posting).

Web pages display OK, but print with garbage characters. I think it's character encoding, but don't know WHICH I should use. Have tried all Western and UTF options. Firefox 3.6.12

I used to only have troubles with headers & footers printing out as garbage characters. I tried changing Character Encoding, now entire pages have garbage characters, even though pages view ok when browsing.

If the pages look OK when you are browsing then it is not a problem with the encoding.<br />
It can be a problem with the font that is used and you can try to disable website fonts and posibly try a few different default fonts to see if that helps.
Tools > Options > Content : Fonts & Colors: Advanced (Allow pages to choose their own fonts, instead of my selections above)

Which adapter should use SOAP or http?

Similar Messages

Maybe you are looking for