Which browser are you using? I've noticed in maintaining the NSNX car threads that Firefox is nearly useless, Safari works decent, and Chrome works pretty well.

I created a Google Maps, map for keeping a railroad database for interesting locations. However I did use and continue to use IE for this and Email only, Firefox is my go to workhorse browser. It appears as though some forum members are having problems using the Personalized maps created in Google maps using Firefox. One of the members continually lost data unless he saved after each and every entry.

Similar Messages

What browser are you using with OS 9.x?

Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
Again, what browser are you using with OS 9.x and what are its good/bad points?
Thanks!
Message was edited by: Paul Stamser

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

Which tools are you using?

which tool are you using for modelling oracle objects?

thanks, but is it possible to create (to the databse) both attributes and methods of oracle objects with sybase power designer or just attributes as a table?

Limit Preview Size. Which setting are you using?

I'm not exactly sure how the Limit Preview Size preference affects my workflow. Which setting are you using, and why?
My preference is currently set to the v2.0 default 1/2 Size. My iMac's resolution is 1680x1050, and I'm using the Canon EOS 1D Mark III taking full size RAW images at 3888x2592.
regards,
Gregory

Gregory,
I use the default (which is 1/2 size) with no ill effects. Previews are used by external programs to gain access to photos in your Aperture library. (This is not the way your external editor works, though.) Your preview size will not affect your workflow. When previews are turned on, Aperture works on generating previews when you have something new of which to make a preview. I seriously doubt that making a small copy, versus making a smaller copy, would affect how long it takes Aperture (and therefore, how sluggish Aperture might appear.) The difference between making previews and not making previews can be significant.
nathan

Which infrastructure are you using and why?

Dear Portal Experts,
I would be most interested in learning which tools portal developers are using in their daily work. I have therefore started a survey at the Collaboration Workspace (actually a discussion - 'survey' was not available).
I would be happy if the readers of this forum could also participate to collect this information.
Thanks a lot,
Björn

Still kinda debating on the two. I have the 8GB 3G right now and don't fill it up a lot.. but I also have another MP3 player that i keep my music on and don't take a ton of pictures. But I know with the better camera and video recording, I will be using it a lot. I am pre ordering tomorrow, but still undecided. Just don't know that I want to spend an extra $100. I can always transfer my pictures to my computer (or website) if I needed to. Just keep the ones I really want. Videos I will probably keep on my computer for sure. Guess I will go with the 16GB. Still leaves me room for songs (I like to keep around 200 at a time for a variety at work), pictures, apps, and some video.

General Forum Question: What Contact Synch Method Are You Using?

This is a question directed towards all forums members using SynchManager to synchronize B2B customers between Web Tools and SAP Business One.
Of the four possible methods listed below:
- WebTools UserID Field
- Email Address
- BusinessOne InternalCode
- Seek and Choose
Which one are you using to synchronize your data?
We're trying to decide between Email Address, BusinessOne InternalCode, and Seek and Choose.

Hi Micheal,
I can not tell you what people are using, but the pros and cons are as follows:
Webtools UserID (the exposed field on the BP contact)
This is the best option if you are willing to do the work of setting this property for all of you users in a meaningful way.
Pros: Allows you assign a meaningful login name for users of the website
Cons: You have to assign he userids (a lot of work if you have 10s of thousands of contacts)
EmailAddress
Pros: hopefully, everyone knows their email address. So this is a meaningful login name.
Cons: B1 does not require email address, so the user will probably end up with an OCPR ID if they don't have an email address.
B1 internal code
Pros: it always works
Cons: no wants to be a number. Your login name will be "1234", password = "whydoIhavesuchahorriblelogin"
Seek and Choose
I consider this the best option, unless you have a better algorithm to populate NPUserID than described below (let me know if you do )
The seek and choose routine works as follows:
1. if they have an NPUserID, user that
2. if they have an email address, user that
3. use the B1 internal code
Pros: User will have the best possible login name.
Cons: You do not know which option the user ended up with
One last note:
v630 (p10--or whatever we are calling it these days), has added a login name to the Webtools user. This addresses the glaring problem of not being able to change login name. Now the user can change their own login. (why did this take 5 years?). Hopefully, this will make this decision less daunting.

Looking for a drum loop app that will run in the background. What are you using?

Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Which router do you use for AppleTV?

So I got to thinking the other day that maybe there are just certain routers that no matter what will not work with AppleTV.
The only one that I have gotten to work EVERY time and consistently is the Airport Extreme Base Station.
My gf had a belkin (I don't remember the model #) that no matter what, I could not get it to remain consistent i.e. had to restart almost every day, randomly showed port 3689 error, etc
I tried the normal stuff, enabling uPNP, port forwarding, etc..nothing helped.
With the AEBS (which I already had and made her get) everything was fine and dandy.
So my questions to you are:
1) If not the AEBS, which router do you use?
2) If not the AEBS, which settings did you have to set?
3) If not the AEBS, what is the model / firmware version of your router?
I noticed many people have problems that are the same things on this board over and over. And I've also noticed that it's usually the router and/or the settings that are causing the issues/inconsistencies.
This should be an interesting thread and should help steer people in the right direction.

capaho wrote:
Airport Extreme doesnt have enuf port forwards for most online games & so I avoided that one.
There is no limit (short of maxing out system capacity). It may not have the presets you want, but you can configure port forwarding manually.
indeed, i can confirm this.
i have many ports forwarded on my AEBS and it is very easy to configure to do so.

Which tool do you use for load testing?

Which tool do you use for load testing for J2EE application?

hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
     For Getting Started refer to any tutorial for Jmeter
     You can refer to introduction on
          http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
     Extract jakarta-jmeter-2.3RC4.zip in c:
     install jdk-1_5_0_12-windows-i586-p.exe
     Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
     In Test Plan add Thread Group
     Right Click Thread Group -> Add->Sampler->HTTP Request
     Select HTTP Request added fill details
          Serverip:www.xyz.com
          Port:80
          Path:/xyz-webapp/index.jsp
          Use KeepAlive: Checked
          Retrive All Embeded images from HTML: Checked(For geting images inside html)
     Right Click Thread Group -> Add->Listner->Graph Results
     Click on Thread Group Fill details
          No of Threads:3(This means no of simultaneous users)
          Ramp Up Period:1(3 Request will be made in 1 second period)
          Loop Count:5(Above process should be repeated how many times)
     Save TestPlan
     Run -> Clear All
     Run -> Start
          Click on Graph Results for Output
     Try adding different listener in Thread Group
          Thread Group -> Add->Listner->Summary Report
     Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
     Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
     In Test Plan Add Thread Group
     In HTTP proxy server select Target Controller as Test Plan > Thread Group.
     Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
          which is configured in Jmeter proxy server.Save Settings.
     In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
     In browser navigate the application which you want to test.
     The nodes will be added in the Thread Group.
     Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
     When we have to login into system and then navigate the system
          we need a cookie to be tracked after login. This could be achieved
          simply by Add -> Config Element -> HTTP Cooie Manager.
     After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
     When a request is made multiple parameter is sent to server.
     Parameters are sent from the HTTP Request node added in the Thread Group
          in "Send Parameter with the request" table.
     If we run the loop count 10 times the parameters will be sent same in every request.
     If you have to send parameters like user1,user2,user3,user4....
          then add -> Pre processor -> Counter.
     Put start as 1 and and Maximum as 10 or whatever required.
     Put Referene name as iCtr or whatever.
     In the "Send Parameter with the request" in value column put user${iCtr}

Check which ACLs are in use

Hi,
Im currently managing a Cisco ASA 5520, that was setup for someone in the pass and I working with it now.
I move from an other firewall's vendor to Cisco ASA and is a litter different.
I want to know where to start with Cisco ASA to know what's going on on this firewall and also I want to know which access list are in use.
I notice that there are many access list, but I dont think all are in use, how can I check this?
We are runing Internet / VPN / DMZ / static routes / some firewall policies (all any to any) / NAT / AAA / etc
Any help?
Thanks in advance.

Hello,
For the ACLs on the VPN
show run map
-Here look for the commands that says crypto map name # match address ACL_NAME
If you are running a version lower than 8.3 while doing show run nat or show run static you could also see ACLs being use
For ACL on firewall interfaces
show run access-group
-Then you will get the name of the ACLs applied to each of the interfaces
Show run aaa
-If you see an aaa authentication match ACL_NAME then you will be running Cut-Through Proxy
Now that you have the ACLs, just do
show run access-list Name_of_ACL
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com

How can I tell which clips are currently used in a sequence

In the Project window there is a list of clips I have loaded, but often I lose track of which clips are currently used in the sequence. In Premiere Elements there was a green check next to clips you have used in the timeline, but I don't see any indication of which clips are currently used in the sequence/timeline I am editing.
Is there some way to sort the loaded clips so that the ones in use all appear first followed by those clips not currently being used in the timeline/sequence. Is there some indication I am missing showing me whether or not a clip I have loaded is currently being used or not?
-Roger Uzun

This isn't really a sorting mechanism, but you can see how many times a clip is used, where it's used, and then navigate to it using the following non-descript button:
You need to have a clip selected in the Project Panel to see this information, of course. Once you click the disclosure triangle, you'll see the list of sequences and the times where the clip is used; if you select one of those references, the sequence will come to the front in the Timeline panel, and the CTI will park at its in point.
Again, not a sorting means, but it might be helpful in some instances.

See which clips are already used in the sequence

hi there,
I am a complete newby for mac and fce
I started a project for my dive video in the Filippines.
I have like a 1000 clips in the browser.
Is there a way in fce to see which clips are already use in the sequence and which are not?
In pinacle studio they were marked with a red v

This is a way to solve your problem.
http://discussions.apple.com/thread.jspa?threadID=2283002&tstart=0

How to find out which queries are being used ?

We have a number of InfoSet Queries which the users are calling from SQ00. Some of them are very old.
I would like to find out which queries are being used, so we can have the idle queries decommissioned.
How can this be done ?
Best regards,
Peter

Hi,
It's been a while since I've done this but one method is to use ST03N & look for the execution of programs with an AQ* prefix. The general structure is AQZZ/<query user group><query name>.
You could probably get the same info from the audit log but I've not checked that.
Cheers,

HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again.

If you are not using J2SE 1.4 - OrderedMap - (maintains order of insertion)

Hi,
If you are not using J2SE 1.4 and still want to maintain the order of insertion unlike HashMap or Hashtable(which doesn't allow)
OrderedMap comes to resue!
import java.util.ArrayList;
import java.util.List;
import java.util.TreeMap;
public final class OrderedMap extends TreeMap {
     private List list= new ArrayList();
     public OrderedMap() {
     public Object put(Object key, Object value) {
          list.add(key);
          return super.put(key, value);
     public List getKeysList() {
          return list;
};;Mail me how to use it!
Bye
tuniki
[email protected]

Hi, Dude!
Probably you have to read the subject b4 posting something!
(Re: If you are not using J2SE 1.4 ->OrderedMap ->(maintains order of insertion))
Tuniki
[email protected]

Which browser are you using? I've noticed in maintaining the NSNX car threads that Firefox is nearly useless, Safari works decent, and Chrome works pretty well.

Similar Messages

Maybe you are looking for