Multiple events created in R3 when creating sales order

Hi all,
We are having a problem when creating and changing a sales order in CRM.
When a sales order is created and rapidly changed (or changed more than one time) from CRM, backend is receiving 2 events (from BO BUS2032, CREATED and CHANGED) but at the same time (not even a second of difference between them).
So the WF that is linked to that event is triggered twice (we are checking if another WF instance is running, but as this 2 events are generated at the same time, the WF instances didn't notice the other instance).
Do you know if there is a way to solve this problem?
Thanks!

Hello
In everyworkflow there is a tab where you define if you want certain event to be triggered. I think it would be enough to de activate this triggering event.
Go to transaction PFTC, enter your workflow ID and choose tab "triggering events". You should have a green light for both BUS2032 -CREATED and CHANGED. Click on the event you want to de activate.
Regards
Joaquin

Similar Messages

Creating a PO when a sales order is created

Hi,
Can anyone guide how this requirement can be achieved. For both scenarios there should be no manual intervention.
This is not a third party scenario.
When a sales order is created then a purchase order should be created in same server and
in different server.
1) For different server scenario i think idoc can be used. what should be my outbound and inbound message types and idoc types. because both po and so have same idoc types(ORDERS) and message types(ORDERS05). so when a sales order is created in 1 system how system knows that it needs to convert to PO in other system. And there should be no Purchase Requisition created..
2) Best way creating PO in same server with sales order with out creating Purchase Requisition.
please share your valuable suggestions.
Edited by: abilash n on Jun 13, 2011 7:12 AM

you need two output types for two scenarios, and there are different ways to do it from there,
for PO creation in same server I would use a Output with Transmission Medium as 8 - special function and used BAPI to create the PO, this way you dont have to keep track of idocs but the once the order is created functin will get triggerd and PO will be generated.
Check with the SD Consultant on how to create the Output type with TM 8(tcode NACE -> V1 - sales -> output types -> ).
for the different server I believe you alredy have the RFC/ connecetions set up. You'll have to use an IDOC for this.
Partner profiles and process codes in destination systems will determine the PO creation.
regards,
nipuna

Create multiple single unit wip jobs for total sales order line qty

Hi all,
I want to know if there's a standard way to create multiple single unit wip jobs from a sales order line which has 2 or more units, i mean...
I have a sales order line with item A with 3 units. If I progress the sales order, a single job is automatically created in WIP with 3 units to be created. What i want is to create 3 jobs with one unit each, all of them linked to the sales line order...
Thanks in advance!
Regards!
Answered.........
Edited by: user604737 on Nov 10, 2010 3:51 PM

Hi Sandeep
We have similar requirement (SO qty = 3 then 3 WIP jobs should be created). However when planning releases WIP jobs it does not tie back(reserve) the jobs to sales order.
Are you aware of any standard way to do the same??
Regards
Mudit Gupta

How to create one delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incorterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Hi
To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
Finally See Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
Regards
Eduardo

Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

Cannot create reservation for a closed sales order

Hi,
IN the mtl_resrevation_interface errors iam getting the message as Cannot create reservation for a closed sales order for most of the items .
when i check the details of the sales order line it is already closed.
but why it is trying to insert the line in mtl_reservation though it is already closed.
i want to know what would be the reason.
Thanks,
Vinod

You may have a custom program that creates the records in the reservations interface table.
That program may have a bug.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

Create a new field in sales order

HI folks i want to create a new field in sales order item level how can i create

Hi,
Hope this will help you,
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.

Automaticaly created invoice related to the sales order

Hi gurus,
I have question for you.
I will create the automatic creation of sales order via BAPi, but after creation of sales order I would like to have also automatic creation of SD invoice. Is there any setting that the invoice can be issued immediately after sales order creation or I need to use another BAPI to do this.
Is there any chance to create invoice for services (without delivery note) automaticaly after Sales order creation.
Thanks in advance
Saso

Hi gurus,
Is there any chance to create invoice for services (without delivery note) automaticaly after Sales order creation.----> Yes u can create SD invoice without Delivery note , but it depends upon ur Config Setting ?
I have question for you.
I will create the automatic creation of sales order via BAPi, but after creation of sales order I would like to have also automatic creation of SD invoice. Is there any setting that the invoice can be issued immediately after sales order creation or I need to use another BAPI to do this-->Better Option is Use Another BAPI to create SD Invoice.
Regards
Prabhu

Budget control in project WBS'e while creating the auto PR from Sale order

Hi experts,
we are creating the auto pr from sales order for trading process with budget wbs element. but commitment is not posted in project wbs were as pr is created through sale order
pls suggest if any additional setting is required to post commitment while creating auto pr from sale order.
rgds
rajesh

Check account assignement categories in SD for PR creation and See if you can make PR to be created with WBS as account assignement like we do in OPTT.

Create Delivery with reference to Sales Orders

Hi All,
I have a requirement to create a program which extracts sales orders - schedule lines and check in hand inventory for a schedule line which is due to delivery and further create a delivery and do PGI (all the activities through the program automatically).
Challenge is that I have to check availability in batches and the batch should not be split to meet the delivery.
My scenario is as below.
Sales order - 01234.
    Item 1 ----> Total Ordered quantity ---> 20
        Schedule line 1 -----> Quantity -----> 10 (delivery is due today)
        Schedule line 2 -----> Quantity -----> 10 (delivery is due today)
E.g. In hand inventory in batches:
Batch 1 ----> 30
Batch 2 ----> 10
Batch 3 ----> 50
In this case Batch 2 is meeting my requirement, so that I can proceed to deliver Schedule line 1 with Quantity 10.
I have referred some BAPIs and FMs but none has a provision to provide batch as the input (along with sales order and Item and quantities).
BAPI_DELIVERYPROCESSING_EXEC
BAPI_OUTB_DELIVERY_CREATE_SLS
RV_DELIVERY_CREATE
Is it possible to propose batch number while creating delivery by using any BAPI / FM. Appreciate your help
Thanks,
Somu

You can pass Sales Order Batch in REQUEST -BATCH Table of BAPI BAPI_DELIVERYPROCESSING_EXEC.

Help Needed. Creating popup windows when creating an app. And a text search button

Hi, I'm new to indesign and am having trouble creating popup windows when creating an app. Also i would like to create a text search button so that people can search text within my app. Can these things be done?? im using cs6 at the moment.

Questions on creating apps with the Adobe Digital Publishing Suite need to be asked in the DPS Forum, where I've moved your question.

Dump after creating new header text on sales order and invoice.

Hello,
We have created one header text on sales order and the same text for invoices, on VOTXN customizing.
Testing the new text, system let us save the text fine, but later, if we display the text, system give us dump error.
My question is, after transport the customizing to the next environment, is necessary run a standard program. Since VOTXN, we have generated the new access created, but dump appear displaying text header tab.
Any help on this?
Thanks in advance

Hello Customer master table man
1) Did you review the dump analysis- ST22? Do that because the dump amy or may not be related to the Text config changes.
2) You are also mentioning about transporting? Did you already transport and are facing this issue in the target client or is it happening in the source client and you want to avoid it in the target? OSS note 1117467 throws light on transporting issues.
Review the following OSS notes:
548615 - FAQ: Text determination in SD II
548517 - FAQ: Text determination in SD I
1117467 - Text Customizing change not transferred in target system II
970153 - Change to Customizing text not transferred to target system
Hope this helps.

How to create a sap script for sales order header items?

Hi friends i am totally new to scripts i have got a task where i have to create a sap script for sales order header items details, the clue that i have got is to create using MEDRUCK but i have got no idea please can any body help me with this task with any sample sap script?
Points will be rwwared with out fail Thks in advance.

Hi,
The Standard Form NAme is RVORDER01
Regards
Sandipan

Can u tell me any bapi to create the purchase req with sales order as refer

can u tell me any bapi to create the purchase req with sales order as reference?

Hi Mukesh,
You can use 'BAPI_REQUISITION_CREATE' for the purchase requisition creation if through transaction, you use transaction ME51N for creating the purchase requisition.
Cheers,
Sujay

Multiple events created in R3 when creating sales order

Similar Messages

Maybe you are looking for