Which client does the Integration imports get imported into?

In all of the documentation it just says to import the appropriate imports, but into which client should they be imported, 000 or in our case 800 (IDES version of BW/BI 7) which is the client we will be connecting to BOE?
Thanks!
Ryan S.

Bashir-
Thanks for the reply. My question is regarding the transports that need to be imported into your R/3, BW, ERP system so that it can connect with BOE. The transports that are in the /Transports directory when the integration kit is unzipped. I haven't seen any documentation on which client on my BW system these transports should be imported into. Should it be 000 as they are cross-client type of things or do the transports need to be imported to the client you will be connecting to BOE?
Ryan

Similar Messages

Import wizard -Does the connection parameter gets changed to prod query

Hello all,
we are planning to use import wizard and move all the stuff from BOBJ dev to Bobj QA. All the universes created are based on SAP BI query.
When using the txport wizard we are basically doing the Select all and Importing all the options given by system. My question is - Would the universe start pointing towards queries that we have already transported from BW dev to BW qa (we are using sap authentication)?
Also when we select all will the user group, client created access levels and root/public folder all get transported?
We are getting a warning message "You have chosen to import server groups from source environment" - Server groups are imported w/o member services. After importing is complete you will have to manually add the desired server to the imported server groups. Failure to do so will render the server groups invalid, which will prevent any reports dependent on the server group from running succesfully......should we not import server groups?
Thanks in advance for your answers.

Hi Stratos,
Finally we were able to import our universes and reports. So once the import is done, do I need to open the designer under my QA authentication and then go to the parameters and edit the connection to point to BWQ server and system? Once we do the change save universe and export it to the BOBJ QA CMS?
Let me know.Thanks in advance

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

Where does the ACS server get the DNS info for IP pools?

I am trying to change the DNS servers that my VPN users are assigned from the IP pools on the ACS server. Where does the IP pools get the DNS server information. I have changed the DNS Ips on the windows server and rebooted. But the VPN clients are still being assigned the old DNS servers.

ACS ip pools do not push DNS server information
It is either being forwarded from VPN concentrator group setup or
it is being send from ACS user/group setup > Radius(VPN 3000) attributes > [026/3076/005] Primary-DNS.
Hope this helps.
Regards
Rohit

What the IP address does the Web Server get?

Hi all,
We have a scenario like this:
Client>Proxy(like squid)........>Web Server( 6.1 SP7)>Application
We know that the Web Server will get the remote IP address, and set as proxy-ip in HTTP Header.
But, what the exact remote IP address does the Web Server get? The IP of the Proxy? or The IP of the original client?
If we want to get the original client IP in the Application, what do we need to do?
Thanks!
Shen

Look at the documentation for customized logging
http://docs.sun.com/app/docs/doc/821-1497/gdsxf?l=en&a=view
Basically, you configure a custom log file format in SJSWS
And instead of using the variable: %Ses->client.ip%
you will use something like the variable: %Req->headers.X-Forwarded-For%

How many sites does the 35.99 get you

Hello with business catalyst how many websites does the 35.99 get a client? I am a new partner and want to be sure I am giving correct information. Am i reading this right that it gives you 5 sites?

Hi there,
If you are a creative cloud account holder and paying the monthly for that you get 5 very basic versions of BC.
For that price you mention:
http://www.businesscatalyst.com/pricing/yearly
You get one webcommerce package (1 site)

HT2646 Does the HDMI cable get connected to the TV or HD receiver if you have a Bose surround system

In setting up apple tv does the HDMI cable get connected to the HD reliever instead of in back of the tv when u have a Bose system?

Your best bet is to connect the AppleTV's HDMI to the Bose and the Bose HDMI to the TV. You could connect the AppleTV's HDMI to the TV and the AppleTV's optical to the Bose but optical (S/PDIF, specifically) does not have as much bandwidth as HDMI so you'd potentially have lower quality sound (from what I've read...I'm not an expert on audio).

How does the integration between CRM and SD occur

How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanks

Hi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?

Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments

Which method does the actual bulk fetch from database in ADF?

Hi,
I'm looking to instrument my ADF code to see where bottlenecks are. Does anyone know which method does the bulk fetch from the database so that I can override it?
Thanks
Kevin

Hi,
I think you need to be more specific. ADF is a meta
data binding layer that delegates data queries to the
business service
FrankSorry - to be specific I probably mean BC4J - when a query runs in a view object.

In which language does the jvm program is written?

In which language does the jvm program is written?
Please give the reason for that
Thanks,
Vidyadhar

Dear Nisha,
you can use table GRACREVREJUSER with the correpsonding reasons from table GRACREJREASON and GRACREJREASONT.
Regards,
Alessandro

Which tables does the IDOC QALITY02 update?

Hi Guys,
I have a serious question at hand. I have to find out which tables the IDOC QALITY02 updates. How do I find this out?
The problem arises because the functional designer wants an IDOC that updates the same tables as transaction code QE51N. Is QALITY02 the right IDOC for doing this? If not which IDOC does the job and how do I find it?
I would really appreciate your help. Please mark this question as URGENT.
Thanks in advance.
- Priyanka Shukla

Hi Priyanka,
Please take a look at these..
http://help.sap.com/saphelp_erp2005/helpdata/en/04/964e38533e3860e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5a/5b5738ed5a1d36e10000009b38f889/frameset.htm
cheers,
Prashanth
P.S Please mark helpful answers

Why does the IPhone 4 get really hot, when you are making a phone call??

I can't seem to find the answer to this riddle . why does the iPhone 4 get really hot when you are making phone calls or when using face Time ??

It doesn't.
There must be an issue with your iphone.
Have you tried reset? Restore?
Have you made an appointment at the genius bar to have them look at it?

If I press "Erase all contents and settings" does the iCloud account get removed from the iPhone?

If I press "Erase all contents and settings" does the iCloud account get removed from the iPhone?
I also do not know the password to the iCloud account and when I go to the "Forgotten Password" link, it says that account is not found.

Yes, but you will not be able to erase it without the password if Find My iPhone is turned on. If you need to reset your iCloud password, read here: http://support.apple.com/kb/PH2617. Of course, you can't reset the password unless it is your iCloud ID.

Which client does the Integration imports get imported into?

Similar Messages

Maybe you are looking for