Which is Better?: Add to multiprovider; Create new ODS; Create new Cube

Which is a better choice:
Add to multiprovider; create additional ODS; create additional Cube?
I have this data flow: 5 ODSes which are aggregated into a single Cube1. A multiprovider then sits on the Cube1. I run Report1 against the multiprovider and from the output, I want to jump (through a jump query) to a much more detailed report.
(information from the different 5 ODSes will be coming together to make a meaning record in the detailed report)
Which of these will be the best modeling approach at this point:
1. Bring in all the detail level information in the 5 ODSes into the multiprovider and create the detail report (against the multiprovider).
2. Create a new ODS and bring in all the detail information from the 5 ODSes into this new ODS_6 and create the detail report against this newly combined ODS_6?
3. Create new Cube2 and bring in all the detail information from the 5 ODSes into this single cube and create the detail report against this newly combined Cube? i.e. without bringing Cube 2 in the multiprovider.
a) Which of these options is the typical thing to do?
b) From performance point of view, which one is better? Any reasons?
c) Do you have a better recommendation to get my report based on the original multiprovider; as well as get the detail (through the jump query)?
Thanks

Everything is based on how much data you are reading.
Remember: the first and second options are slower because even if you are creating query against the Multiprovider in the first option, both options read directly from the ODS. Technically, ods is not optimized for reporting (reading). ODS is just like a normal relational database table, unless you use the key to read data from, it is very slow (everything is not indexed).
Option 3, is much better in respect of design and performance. Reason, cube support multidimensional analysis, where all char is related with SID which is being generated automatically which increases performance.
My recommendation:
Create another ods (combine all the other ODSes) just like you did in option two, and push summarized data in the cube and detail data in this ods. Write a report again the cube when needed jump to the ods.
Hope that helps.
thanks.
Wond

Similar Messages

Which is better - Add a dimension or create more members in an existing

Which is better - Add a dimension or create more members in an existing dimension?
We are trying to figure out which can give us better performance in terms of calculations and retrieving reports - to add another dimension (entity/country) or add about 500-800 more members in an existing location/division dimension?
Thank you!

If you have BSO cube i would recommend to add in the same dimension where as ASO you can add members in a new dimension. Adding a new dimension is like creating a new cube you have to change each and every single calc scripts,report scripts,FR reports,Webforms and your rule files .... all the dependencies has to be changed manually . I think 500 members in the exsting BSO dimension will not impact the calc or retrieval times that much .

Not able to find the New ods created in Query Designer.

Hi,
I am trying to create a new query on an ODS(new) in Query Designer but not able to find the ODS . The ODS is present in the system however when we check . Please advice whats going wrong.

Hello Prakash,
I know the solution
Go to RRMX -> Queries -> Select New Query -> and then click on InfoArea -> Select ur new ODS -> and Click OK
U will be able to see characteristics and keyfigures..
Drag and drop and click on execute....
Reward if its helpful.....
Thanks,
Sonu

Which is better?Using standardised BAPI directly or creating different BAPI

Hello all
I need to get a Customer record .Here iam using bapi BAPI_GETCUSTOMER_DETAIL . So shall i use the standardized
BAPIi in my programme directly or create a different RFC using the standard one.
Which one is a better option to follow?
Thanks in advance

Hi leo,
yes you can call bapi's from a java file ..
Sample code of how to do it can be found on help.sap.com ..
The link for the same [LINK|http://help.sap.com/saphelp_46c/helpdata/en/76/4a42f4f16d11d1ad15080009b0fb56/content.htm]
regards
Manthan.

Hey, I want to buy a macbook pro or imac mini, I want to know which is better and why, is their going to be new macbooks ect released in 2-3 months thats better that i should rather wait for? Or buy one now ?

Please help me i dont know which one to buy, and ive never owned one before but i have used my friends quite alot. Why is macbook's worth buying if you can get many products for the same price with better specs ?What makes it unique that it dominates basically the whole world.

Hey,
Thank's 4 the advice , but one of my main problems is I live in South Africa and apple products is x2 as much as what the usa doller is for it. Eg Macbook pro starting price $1199 american dollars and directley converted to South African currency is R9160.30.... but the problem is if i want to buy it in my country it has been marked up alot and a Macbook pro starting price for me will be R13000 for 13 inch and if you directley convert our price into american dollers its $1704.30 american dollars, so thats +600 dollers more.
So its much more expensive to buy products in my country and thats just the starting price.
I want mobality but i was also thinking (imac mini) is kinda portable and can plug into any1 T.V u know.
So like i really do t know what to get and that, because its alot more money to spend than the US dollar.
So i really want you to put your self in my position you know...
And what is classified as a good monitor???
And i want to know why my friends say that the imac mini is pathetic , but i think it losts longer than most windows laptops, what do you think ??
And can i who lives in south africa buy products directley from apple them selves ??
Thank's man , hope you can help me out here!
Hope other people can c this 2
Brent

IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
Note, I will use both Hotmail and iCloud eMail.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

New Macbook Pro...Hard drive vs Flash...which is better?

I'm looking to upgrade my '07 iMac to a new Macbook Pro. I'm wondering whether to get the hard drive or flash drive....any suggestions as to which is better? Also, going with the Retina display I lose the DVD drive & would have to go with an external drive...is that display worth losing the drive??

MarcusBenz wrote:
is that display worth losing the drive??
No. It's power hungry and it has issues.
I'm wondering whether to get the hard drive or flash drive....
Flash drive will give you less problems and is shock reistant, but the data you store on it can be accessed even if deleted.
There is a device from Cellibrite that can be used to gleam the password and retrieve all data of a flash based cell phone, iPad etc, even if deleted. So natually flash based computer will be added to the list and Apple is cooperating to do this at the request of the government for fast access/copying at Customs etc, regardless of Filevault.
So a traditional hard drive offers a chance to really delete data, provided the 7x erase (far right selection) is used.
It also seems Apple has removed the 0x and 7x descriptions from 10.7, 10.8 Disk Utility, just giving you secure and more secure options, not telling you the specifics because 7x is Department of Defense level erase, meaning special magnetic instruments can't be used to recover data off a 7x erased hard drive.
going with the Retina display
Also you can't open it up, add RAM, remove/replace storage or fix it.
After three years when your AppleCare is up, you have to toss the Retina as nobody can repair it.
Unlike the 15" antiglare, it can go on a lot longer due to third party repair options, new drive, keyboard, more RAM, new fans etc.
Also the screen is viewable in nearly all conditions, unlike the Retina's glossy display.

Which is better and why a = new String("AA") or a = "AA"

Hi,
Which is better and why
String a = new String("AA") or
String a = "AA"
Does invoking a construtor waste memory? Please explain in detail.
Thanks in advance
Deepak

> So in case "AA" not there in string pool,
That is not correct.
does new creates "AA" on string pool as well as heap memory?Yes. The literal "AA" points to a pooled String object. The new operator creates a new String object with the same character sequence ("AA"). You can verify this with a little code...
String s = new String("AA");
assert s != "AA";
assert s.equals("AA");
assert s.intern() == "AA";~

Hi All, which is better while creating an object

Hi All, which is better while creating an object,
for ex:
public class Joe {
public void disp() {
System.out.println("Joe.disp");
(1) Joe j = new Joe();
j.disp();
(2) new Joe().disp();
of course, both are equal, which is better in performance perspective

I suggest you just write code and when the assignment is done, AND you have a performance issue, only then try to improve things. The question you're asking now is likely of no relevance to the performance of you application.
You can run your application through a profiler to see what specific part of it is consuming (too) much memory.

Which is better and newer, virus scan 6 or pc cillin 2000?

which is better and newer, mcafee virus scan v6 or pc cillin 2000?
thanks,
edison

edison,
I run without a Virus Smasher Program. If I am going to download something I run Housecall. Also I do not use Outlook or Outlook Express for email so I do not get those types of attacks.
You could try Housecall here:
Trend Micro's free online virus scanner
This thing is a browser plugin. Does not run unless you are on their site. It is Free. It does not take up any recourses. It is Free. It is always up to date. It is Free. It never expires. It is Free. You never need to register to use it. Oh, and did I mention it is FREE!!! :D
Take Care,
Richard

Which is better? Resize datafile or add datafile in same diskgroup.

Hi All,
Can you explain which is better option between adding a datafile or resizing one in a diskgroup with 20 disks?
Regards,
Avi

hello buddy,
Since you know that a small file datafile has a limitation of 32gb then if your tablespace is out of this space then the solution is add more dfiles, also, in my point of view less datafiles in a hughe database is better for evite ckpt contention. The answer is dependo always for your situation!!!
I hope it helps
best regards,
Rodrigo Mufalani
www.mufalani.com.br

Should I buy Imac 27'' 3.1 or the new imac 27'' 2.9, which is better?

Should I buy Imac 27'' 3.1 or the new imac 27'' 2.9, which is better? The use to which it is going to give is photographs, video, text processing. If opt for the new'll have to buy an external drive for recording of videos and photographs.

Photos, text & most other things should be fine on either, Video may be a bit better with the faster one, but Video card options may be a far bigger deal.

Can I add just cells in numbers without creating a whole new row?

can I add just cells in numbers without creating a whole new row?

Thanks to Jerrold Green1 for the answer to this back in Dec. 09. Numbers is so logical, it worked perfectly.

HT2534 I just create a new ID, but after verified my email add, I still can't use my new ID neither with credit card nor none. I just stuck at review my account step, please advise.

I just create a new ID, but after verified my email add, I still can't use my new ID neither with credit card nor none. I just stuck at review my account step, please advise.

What do you mean 'give me an example please' ? And 'dont have use a credit card' ?
Unless you follow the instructions on this page when creating a new account : http://support.apple.com/kb/HT2534
then you will need to enter credit card details before the account can be used in the store.
If you don't have a credit card then you will need to create a new account, but this time follow the instructions on that HT2534 page when creating it. If you want to use the same email address then you will need to replace it on that account first e.g. via the Store > View Account menu option on your computer's iTunes, http://appleid.apple.com, or by tapping on it in Settings > iTunes & App Store on your phone.

Each time I add a bookmark is a new plist created?

Each time I add a bookmark is a new plist created?

I have never seen that. You have an error of some kind in your system and I would suggest you repair the hard drive as well as permissions, then run the 10.4.11 combo upodater again and reinstall Safari 4.0.3.
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Later versions of OS X.
Background information here:
http://support.apple.com/kb/HT1452?viewlocale=en_US
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html
Apple's advice on general maintenance:
http://support.apple.com/kb/HT1147?viewlocale=en_US

Which is Better?: Add to multiprovider; Create new ODS; Create new Cube

Similar Messages

Maybe you are looking for