Which module of CompactRIO can be used to measure strain gage

I wonder which module of compactrio can be used to measure strain gage. or should i use the analog input module to measure the value and use the analog output module to excite the bridge?

Hello,
You are correct that you can use any of the analog input modules to take measurements, and use analog output modules for bridge excitation. You might also need to add other external components for bridge completion, depending on your sensor.
Regards,
Vineet A.

Similar Messages

  • I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data in addition to backing up the hard drive?

    I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?

    Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?
    Yes, but if you move the "original" data on your iMac to the Time Capsule....then the "original" data is now on the Time Capsule disk. 
    When...not if...the Time Capsule disk has a problem, you have no backups for this data.
    Perhaps a much safer plan might be to add an external hard drive attached directly to your iMac. Then, move the data to that drive from the iMac.
    Now, Time Machine will back up both your iMac and the external hard drive so you have "originals" on one drive and backups on another. Would that plan work for you?

  • Which mobile broadband dongle can I use for my PowerBook G4 running with OSX 10.5.8 please?

    I was given an O2 dongle E173 as a gift but cannot use it as the specification is for an Intel Processor which of course the PowerBook G4 does not have!
    Which dongle can  I use?

    Hi,
    If a USB mobile broadband modem for some reason cannot be used with a certain computer, a good alternative can be a mobile broadband hotspot. This is a device (with a SIM card) that works like a mobile broadband modem, and is capable of establishing a wireless base station. The wireless connection between the computer and the hotspot is normal Wi-Fi. If the computer can handle Wi-Fi, there is no need for any additional software/driver installation. Below is merely one example.
    http://www.o2.co.uk/broadband/mobile-broadband/o2-pocket-hotspot
    Jan

  • Which Windows registry key can be used to check if Adobe CS5, CS6 or CC is installed?

    I need to check which product is installed on my machine programmatically. Whether it is Adobe CS6, Adobe CS6 or Adobe CC.
    Which registry key I can use to check exact version?  Knowing just major version will also do

    This won't be easy, but you can get the address table by sending IOCTL_TCP_QUERY_INFORMATION_EX to \Device\TCP as documented
    here. You'll need to spend some time looking at TCPIOCTL.H in the SDK, too. If you search the Internet for IOCTL_TCP_QUERY_INFORMATION_EX, you'll find some hints on how to use it.
     -Brian
    Azius Developer Training www.azius.com Windows device driver, internals, security, & forensics training and consulting. Blog at www.azius.com/blog

  • Which type of books can I use JUST on my IPOD classic?

    Does anyone know.  I have purchased other books and then can't use them on the classic (just on the tablet).  I know this is an easy answer, but I can't figure it out.
    All the best

    Alas, the Classic doesn't support radio. The basic classic can only play stored audio files. iTunes plays radio by streaming it over the network.

  • I have a ipod classic which i purchased 2007,can i use the new apple tv dock to play my itunes video clips via my ipod classic to view on my tv

    hi there, i have a ipod classic purchased in 2007,with the release of the new Apple TV dock in Australia,my question to anyone out there including apple suooort staff,CAN I USE THIS NEW DEVICE TO VIEW MY VIDEO CLIPS I DOWN LOADED FROM ITUNES ON MY TV INSTEAD OF BUYING THE APPLE COMPONANT CABLES....THANKS  EDWARD

    You can plug the iPod into the same iTunes library as your iPod Touch and sync whatever content you like to it. There is no limilt to the number of iPads, iPhones, or iPods you can sync with one iTunes library, account, or computer.  How you sync one device will not affect the syncing preferences of the other.
    B-rock

  • Can't use the Measurement & Automation Explorer in the dl eval version

    I'm trying out the evaluation edition of LabView. I try to use the Measurement & Automation Explorer, but I get an error saying its not installed.

    Hello,
    You should be able to use MAX with LabVIEW eval. To make sure MAX is installed, go to
    ...\Program Files\National Instruments\MAX
    If you have NIMax.exe, MAX is installed. Even if you don't have LabVIEW installed, you should still be able to open MAX from this location.
    Do you get this error when launching MAX from its installation directory, or when opening some of the LabVIEW wizards that call MAX? The LabVIEW Evaluation Version gives the option of installing simulation DAQ VI's. If the complete install option is chosen, the simulation VIs are installed.
    To avoid this, choose a custom install and don't allow the Evaluation Version to install NI-DAQ. After the LabVIEW Evaluation Version is installed, install NI-DAQ and include support for LabV
    IEW 7.0. The DAQ VIs will now read data from your DAQ device. There is a link to the NI-DAQ download page below.
    NI-DAQ Driver Support for Windows
    Using the DAQ Assistant or Creating a DAQmx Task in LabVIEW 7.0 Evaluation Version
    Frequently Asked Questions about the LabVIEW 7.0 Evaluation Version
    Zvezdana S.
    National Instruments

  • Book Module Lightroom 4 -- can I use a color picker to pick a color from a photo to use as the backg

    I am trying to match a background color for a page in a Blurb book using the Lightroom 4 Book Module.  Is there any way I can use the color picker to pick a color from the photo to use as the color for the background and as the type color?  I see the color box for these situations, but the color picker only seems to work with the color array that pops up and doesn't go to the photo.  Any suggestions?  Am I overlooking something very obvious?

    It works for me.
    The usual Lightroom way: click the eyedropper onto the color palette first, then hold and drag to your photo to sample color.

  • My macbook pro hard drive died.  I only have a windows hard drive and an old powerbook G4 which of course you can't use to create a boot disk for my macbook.  How can I solve this?

    I can't get app store on my old power book to download OS X,  My macbook pro hard drive died and all I have is a windows hard drive, still has windows os  on it, a 500 Gb USB drive and this power book.  How can I get my macbook back up without spending money?  Thanks

    And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
    He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
    dwb wrote:
    The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
    And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all.

  • Which iPad 4 versions can you use with Swedish mobile SIM cards?

    Browsing around user forums and getting more and more confused :b If I want to use an iPad 4 with a Swedish SIM card as of today = being able to use an iPad 4 in Sweden without Wi-fi connection, which models do I have to choose from? Read a lot about 4G technology not being compatible with Swedish technology etc.... Help?

    You can not "unlock it to T-Mobile". If the phone is locked to AT&T, ONLY AT&T can authorize unlocking it. Contact them and find out if it's eligible for unlocking. If it is, and you meet their requirements, they will process the request to unlock it. If it is not eligible, and/or you don't meet their requirements, then it can only be used on AT&T.

  • Which external USB HDD can i use for backups

    Hi,
    I'm going to buy an external USB HDD for my MacBook for bootable backups (by SuperDuper). Can I purchase just any external hard drive or are there any limitations?
    Thanks,
    Vadim

    Hi,
    Welcome to Apple Discussions.
    The limitations are the usual reliability and manufacturer's reputation. USB 2.0 (480Mbps) itself will cause no issues when making your choice. It's not possible to give a definitive answer on which manufacturer/make/model is best but I can give you an opinion. I like Iomega and Hitachi. For plug-and-play look at Iomega or D-I-Y using an Icy Box look at Hitachi Deskstar range.

  • Which external hard drive can I use with my Macbook (2009)?

    I'm looking to purchase an external hard drive for my 2009 Macbook os x 10.6.8 (the heavier, white laptop). It looks like most hard drives are compatible for Macbook Pro and newer.

    If your MB is an early model 2009 you can use either Firewire or USB 2 drives, late model 2009's don't have firewire so you're limited to USB.  I'd stay away from WD and Seagate externals, their enclosures aren't very reliable. The Toshiba Canvio drives work well. Pretty much any drive from OWC is top shelf http://eshop.macsales.com

  • Which Listener in PJC  can I use to change for example the UPDATE_ALLOWED P

    Hi,
    i have wrote a PJC that change a few properties of a Forms object. For example a label, the foreground color...
    My Problem is, with which Listener can i change a few forms objects at the same time.
    For example to change the Update Allowed Property for 5 forms objects at the same time?
    What is a customListener?
    Thanks
    Wolle

    I thought a VBUTTON or VTEXTFIELD is a origin FORM
    CLASS not a swing CLASS OR?
    Forms is based on Java not on Swing! I can switch the
    backgorund color the enable Property of a forms
    object, so i thought every forms property is a
    property in the id CLASS.
    WolleSo, you think that Swing is not Java ?
    Ok, have a good luck ;o)
    Francois

  • Which 3rd party IDE can I use on a WIN98SE O/S??

    Hi all,
    Quick question - I have Windows 98SE on my machine at home and am basically teaching myself JAVA ...... other than NotePad or Wordpad is there any other IDE I can use?????? Most if not all I have seen need Windows NT or 2000 to run....... Can Forte run on a
    98SE machine????.....
    Thanks in advance
    Mike
    Cleveland Ohio

    Forte can run on win98se I believe, but it needs quite much memory.
    Check this topic about different IDE's
    http://forum.java.sun.com/thread.jsp?forum=54&thread=226270

  • Which Atheros WiFi card can I use in Satellite A105 - S2201

    Anyone know the stock WiFi adapter for the A105 - S2201 is? I know it's Atheros but does it matter what model? I need to figure which one is it so i can download and install
    thanks

    Hello
    Please visit THIS PAGE and there you can find everything you need for your notebook model.
    Bye
    If you need more assistance please write again.

Maybe you are looking for

  • How do I wirelessly connect my Windows computers to my HP Officejet Pro8600e-All-in-One PrinterN911?

    I have been through the entire Troubleshooting assistance guide and nothing helped. My printer says it is connected to the same wireless networks that my computers are connected to but when I try to put in the printer's IP address in the wizard it ca

  • SMART Utility Says "Failing"

    My 12" powerbook Aluminum was refusing to shut down--meaning I couldn't clone it to my external. So I ran SMART Utility. It found Pending Bad Sectors: 2, Reallocated Bad Sectors: 3, Total Errors 30, and Last Error Type: Uncorrectable. So I ordered a

  • PIM does not connect to ACD (Does not active - stays idle)

    Situation: PIM does not activate.  Center took a power hit -  PG took a hit and had mother board replaced. After that the PIM attempts to connect but is continuously disconnedted: SPECS: PG (ver 6.0) running on a windows 2000 box              CRT cab

  • Why do we lose counts through a timed loop?

    I have written a program to count the rising edges of a square wave produced by a function generator using the DAQmx functions. The counter is read in a time loop with a period of 1 second, so we take a sample once every second. It appears that the p

  • Saving wave files in STP editor

    I have this problem which is very annoying. I have sampled some sounds from my hardware synth, logic playing the synth from every key and recording it. Then I edit the big soundfile in Soundtrack Pro's audio editor and save every single sample as sep