Which Table will have 'Report to Report Interface (RRI)' Details?

Hi all,
Which table will have 'Report to Report Interface (RRI)' Details after creating them with RSBBS Tcode, PLEASE.
Thanks in advance.

Hi,
Serach in these tables
RSBBSCUBE
RSBBSCUBEDIR
RSBBSQUERYDIR
Cheers..
Krishna

Similar Messages

In Which table Will maintain the All Workflows Triggering Event Details?

Hi,
Can Any one tell me
In Which table Will maintain the All Workflows Triggering Event Details?

Hi Mohit,
The Tr Codes KE29N/KE28L will give me the Logs of Past TDD runs. However, i would like to see the all the variants in a go. Due to a Organizational change, there is a new characteristics introduced. Now we need to change the sequence of the TDD runs. Since there are lot of TDD Variants that are in use. we need to get all of them into an excel and then decide the necessary changes.
Thanks & Regards
Surya

Which table will have Page(XML) info

After importing say TestPG.XML using import command, where to check whether this page is imported not. Where is the MDS info r stored?

As for the question on which tables are used, there are four:
APPLSYS.JDR_ATTRIBUTES, APPLSYS.JDR_COMPONENTS, APPLSYS.JDR_PATHS and APPLSYS.JDR_ATTRIBUTES_TRANS.
You are much better off using the JDR utils to see if it has posted. I used the following to see if something I recently imported worked properly:
DECLARE
BEGIN
jdr_utils.listdocuments ('/oracle/apps/ar/cusstd/acctoview', TRUE);
END;

Which table will give vendor master details per company code per purchase o

Which table will give vendor master details per company code per purchase organisation that is all details available in XK03?

hi
Check T code MKVZ
Or table LFA1
Vishal...

Which table will give the completion timestamp of the last success run?

Which table will give the completion date timestamp of the last successful execution of an OWB Mapping or Process_flow.?
I was thinking of using
select max(RTA_LOAD_DATE|| RTA_LOAD_TIME) from OWBSYS.OWB$WB_RT_AUDIT
where
trim(RTA_LOB_NAME) like '%EMP_LOAD1%'
and
rta_status = '1'
But the RTA_LOAD_DATE AND RTA_LOAD_TIME is null
and RTA_STATUS column is having the value 1 irrespective of whether the JOB has completed or abended
Please advise??

Check with these tables :
<b>coss
cosl
cosp</b>
aufk
qmat

Which table will give me the serial numbers per each delivery?

Which table will give me the serial numbers per each delivery?

Hi,
Table:
SER01 -> provide links between delivery and serial number object.
You can select by LIEF_NR = 'delivery number'.
OBJK -> content of serial numbers
You can select by OBKNR = 'SER01-OBKNR'.
Further more:
You can check in SE11 with name "SER0*". Then you can see a list of tables which contains link between serial number to other document.
SER01 -> Delivery
SER02 -> Maint.Contract (SD Order)
SER03 -> Goods Movements
SER04 -> Inspection Lot
SER05 -> PP Order
SER06 -> Handling Unit-Content
SER07 -> Physical Inventory
SER08 -> Purchase Order Item Serial Numbers
Regards,
Harry

Can I select which components will have auto binding turned on?

To be honest, the only reason I don't use JDeveloper full time is due to this reason only.
Can I select which components will have auto binding turned on?
I don't see the need or reason to bind every single component in the page to your backing bean.
This can clutter up your backing bean and all the searching for the bindings that I do care about is a real time waster.
I've looked at the preferences and settings without much luck, thus I'd appreciate any thoughts on this topic.
Thanks,
--Todd

To make sure I understand your response, your refering to Managed Beans as your Backing Beans - I thought the two were the same thing.
Moving on, that is a good idea and I'll try it right now in a test project.
Thanks,
--Todd

I've different contact info and mail addresses on pc(windows xp), iPhone and iPad, gmail. What is synchronized where, in which direction? Which unit will have to be correct before syncing?

I've different contact info and mail addresses on my pc (windows xp), iPhone and iPad, using gmail. I get different results when synchronizing with iTunes.
What is synchronized where, and in which direction? Which unit will have to be correct before syncing?

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

Which table will contain user entry info

HI all,
I have duplicated user in OID and I am finding the way to clean them up. Any way, I am looking for tables in ODS schema that contained users and group they belong to so I can use ldapdelete to clean them up.
Please let me know which tables in ODS had that info
thanks

if you're just looking for the dn try
ldapsearch -L -b "cn=users,dc=yourdomain" -s sub "objectclass=*" dn | grep "your user"
notice -L will give proper LDIF file notation.
Don't touch ODS schema tables unless Oracle Support tells you what to do.
regards,
--Olaf

Which table will get updated for batch characterstics for the MIGO trans?

Hi all,
As i am trying to post a goods receipt for 101/102 movement type in MIGO transaction.
But it is giving error as 'Batch characterstics values are not classified'.
If i give Batch Type- as PRODUCTION(P) in batch classification.
It will get posted.
Can any one help me out in which table this field will get updated.
Thanks...

HI ,
Try table MSEG.
Regards,
Mohan

Which table will give data of structure KKBCS_OUT

Hi All,
I have requirement to get the values of Total target cost and Total actual
cost of production order.
Tcode: CO03->Goto->Costs->Analysis
We can see the posible cost elements and values of respective production order.
But all these data are stored in KKBCS_OUT structure.
Could you please tell me which table we can get these information?
I have checked individual data elements in where use list also. But i am not able
to find any thing.
Please let me know if any one faced same kind of issue.
Thanks in Advance
Basha Sk.

Check with these tables :
<b>coss
cosl
cosp</b>
aufk
qmat

Which one will have better career (BW+BODS) or (BO+BODS).

Hi All,
I want to know which career path will have better roadmap for next 10 years, (BW+BODS) or (BO+BODS). I have started my career with BW, and now I am planning to to learn some other SAP Module,i.e addon to BW, which will progress my career.
Can anyone suggest me that is my Idea of learning BODS will help me or not? If not please suggest me some other path..
Regards,
G S Ramanjaneyulu.

Hi Rama,
Why do you want to restrict yourself on learning on this combination. My colleagues all are BW, BODS and BO Consultants. If any project require specific, they split depends on the project or whichever they want learn more.
Nowadays, it is very common for consultants that they know two or three modules or systems.
You already know SAP BW... so learn BO next and then BODS or whichever you like.
BO is very good in Market currently on Dashboard and Analytical.
Regards
GGOPII

Object or Method or Syncronized block : Which one will have lock

Hi Friends ,
In Java we can write a Synchronized method or a block .
In order to access this method or block of code, a Thread has to attain a lock .
I want to know on what thing did the Thread acquires lock and monitor , Is the lock on the Object or a Method .
In some tutorials it is said that the Thread will acquire lock on the Object .
If this is true, how can an another thread access another synchronized method on the same object .
Thanks

rajeshreddyk wrote:
Hi Friends ,
In Java we can write a Synchronized method or a block .
In order to access this method or block of code, a Thread has to attain a lock .
I want to know on what thing did the Thread acquires lock and monitor , Is the lock on the Object or a Method .
The lock is associated with the object.
In some tutorials it is said that the Thread will acquire lock on the Object . That is correct.
If this is true, how can an another thread access another synchronized method on the same object .It can't. That's the whole point of synchronization.

Bookmarks is transitioning able to access your bookmarks in read-only -expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.

CAN ANYTHING BE DONE TO SPEED UP THIS TRANSITION PLEASE?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Which table connects the PO and ship to party details

Which is the table that connects the Purchase order and the Ship to party/Recipient

Sorry...mistake in the above post.
I suppose ur working for reseller project...the PO contains a tab called delivery address in which there field called customer (ship_to_party) stored in table EKPO by field KUNNR as it may vary for every material in the PO...this again gets linked in delivery table LIKP by field KUNNR (ship_to_party), here you can also find sold_to_party.
Regards,
NaliniKalyan.

Which Table will have 'Report to Report Interface (RRI)' Details?

Similar Messages

Maybe you are looking for