Which veriable in TS store the Execute mode (Test UUTs, Single Pass etc..)
I'm writing a program in CVI7.0 with TS3.0. I would like to inquire the TS to the Execute mode.--was the user selected Test UUTs (F5), or Single Pass (Ctr F5), or 'Run Main Sequence' or 'Run Selected Steps'.
Can you advise how to do that?
Thanks
Hello,
To determine which Execution Entry Point is being used to call your client, you can use the TestStand 3.0 API to call properties an methods that will return to you the name of the root sequence. I have attached a sequence file that makes ActiveX calls to the API to do just that and displays the result in a Message Popup step. If follows these steps:
1. Get the root context (this will be the context of the sequence of the process model that is used to execute, ie: Test UUT, or Single Pass).
2. Get the sequence from the root context.
3. Get the name of the sequence.
4. Display the name (if it is a Test UUT, I have preconditions set up to only display it on the first UUT tested).
If you chose, "Run Main Sequence", the name that you rec
eive will be "MainSequence" because the root sequence is not a Process Model sequence, but the MainSequence of the client file.
I hope that this is helpful. Take care and have a great day!
Aaron B.
National Instruments
Attachments:
GetExecutionInfo.seq 31 KB
Similar Messages
-
Which table stores the information about a user (name, username etc.)
Which table stores the information about a user (name, username etc.) .Is it LDAP server or MSSQL server? then hw to go to that table ?
I guess this is a question about CAD - and it doesn't matter much if it's UCCE or Express. The info is in the LDAP called Directory Services. In UCCE the Sync process updates the LDAP from the ICM config database.
You can use a free LDAP browser to connect to the LDAP (anonymous connection) and read the LDAP.
Regards,
Geoff -
Dear...
On EP screen I want to execute the executable file(ex: Microsoft Word, SapGui, etc) by clicking button.
Is this possible?
If I can execute the executable file by clicking button, please give me how to do this.
thanks,
sangyuun.Hi Sang Yuun,
like I already said. It would make little sense to provide a button or the like on a portal page. That is because you do not know if the user that clicks the button actually has the application (in your case MS Word) installed on his computer.
There are three ways of starting an application like Word:
1. Start it on you local PC.
2. Start it from a file server via the Network.
3. Start it on a remote computer in a remote session.
Where is the Word Application located/installed that you plan to start your way?
I am not aware of other ways - i.e. via an Internet Server. Word is not behaving like a Java Applet that you can start via the Internet (clicking on a link or a button).
The Portal is accessed by using a Browser. If at all available, you would need to run a web version of MS Word. It don't believe a Word Version like this is available - contrast this with Outlook. but for that you need a Mailserver Web Extension.
I hesitate a guess - but I don't think it is possible what you are planning. Any other takers?
Also think this way - If a user is accessing your Portal and opens a Web page containing a button that starts an application on his computer - that page would most likely be regarded as hostile. Most security features would possibly classify this as a remote attack on the computer ... I let you think about what would happen next.
Hope this helps.
Wolfgang -
Table which stores the executed 'Z' programs
Hi All,
I want to know in which table the EXECUTED 'Z' programs will be stored.Pavan, ABAP buffer PXA (Program Execution Area) Stores the compiled executable versions of ABAP programs (loads). The contents of this buffer are stored in tables D010L (ABAP loads), D010T (texts) and D010Y. And for reports D010S, probably Z's are stored in last one.
-
In which SNP_% table ODI stores the KM options?
Hi,
I was wondering if anyone knows where does ODI stores the KM options? Is it in some SNP_% tables or in some other tables in the repository?
I know that KM and its steps are stored in SNP_LINE_TRT table. But I am not able to locate the KM options.
Rgds,
ChandraCheck
snp_user_exit table
Thanks,
Sutirtha -
Where should i found the executed automation test cases result in TestResult folder?
we are using VS2013, i have automated some coded ui test cases and executed from test explorer. once completed i am able to view the test result in the Test explorer window. But I am unable to view in the 'TestResult' folder under project location. (In The
Test result folder created IN & Out sub folder ) I think it should be create .trx file under TestResult folder. is there any configuration required.
Please guide me.
Thanks in Advance.Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know that when we automated coded ui test cases from VS IDE, it is default that there have no the .trx file be created in the TestResult folder. However, there have a replace workaround that we can automate coded ui test cases using MSTest.exe
in command line. And then we can get the .trx file be created in the TestResult folder.
So you can execute the /resultsfile command to get the .trx file using mstest.exe in command line.
Reference:
https://msdn.microsoft.com/en-us/library/ms182489.aspx?f=255&MSPPError=-2147217396
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to specify the directory in which we want to store the uploaded files
Hello !!
I am using apache commonfile upload for uploading my files.I followed the user guide and tried to run a program,but my problem is I am not able to understand as to how to mention the directory in which the uploaded file will be saved..My code is given below :
package r;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
import java.util.*;
import org.apache.commons.fileupload.*;
import org.apache.commons.fileupload.servlet.*;
import org.apache.commons.fileupload.disk.*;
import org.apache.commons.io.*;
import java.lang.Exception;
public class fileupload extends HttpServlet
public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException,ServletException
// Check that we have a file upload request
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
System.out.println(isMultipart);
if (ServletFileUpload.isMultipartContent(request))
// Create a factory for disk-based file items
FileItemFactory factory = new DiskFileItemFactory();
// Create a new file upload handler
ServletFileUpload upload = new ServletFileUpload(factory);
// Parse the request
try {
List items= upload.parseRequest(request);
Iterator iter = items.iterator();
while (iter.hasNext())
FileItem item = (FileItem) iter.next();
if (item.isFormField()) //NORMAL FORM FIELD
String name = item.getFieldName();
String value = item.getString();
System.out.println(value);
else
String fileName = item.getName();
System.out.println(fileName);
String contentType = item.getContentType();
File saveTo = new File("/info/upload_files/myFile.jpeg");
try
item.write(saveTo);
System.out.println("File written" );
catch(Exception e)
System.out.println("File not written");
// InputStream fs= item.getInputStream();
fileName = FilenameUtils.getName(fileName);
System.out.println(fileName);
}//end of try
catch (Exception e) { }
public void doPost(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException
doGet(request,response);
The problem is that the control doesn't reach the try statement and I get " File not written" on the console because it enters catch everytime..Please tell me how the path to the directory should be given...Rest of the code is working fineNo, the problem is that when an Exception is thrown, you ignore it completely and throw away all the information associated with it. That leaves you to guess at what the problem is. So instead of answering your guess at a good question, I'm going to suggest that in all of your catch blocks you put this code:e.printStackTrace();Then you can look at the output in the log file and see what the problem is. Start from there.
-
How to use the function module which i mentioned, to store the pdf files
hi,
SO_NEW_DOCUMENT_ATT_SEND_API1
I am using above function module to send employ details through mail in pdf format, if i want to store that pdf files in a local computer too, then how should i catch hold off those individual pdf files of all employees, plz help me out with a sample codehey iam from functional side can u be little bit clear of that feature
thanks
sikindar -
Which table stores the Tax percentage rate of commercial invoice?
Which data base table stores the tax percentage rate of the items in a commercial invoice? Or which FM can return the tax percentage rate?
HI,
Don't post the duplicate threads for same requirement...it against to the SCN rules. Moderator can delete this thread.
Report to Moderator!!! -
Which WMI class stores the Service Window informations in Client
can anyone tell me which WMI class/Properties stores the information about service window for a client?
I want to know what is start time & end time of that service window and next service window time.Configmgr report for Next service Maintance window : http://sccmfaq.wordpress.com/2013/08/22/sccm-2012-show-next-effective-maintenance-window/
and http://eskonr.com/2010/11/sccm-report-computers-with-maintenance-window/
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
Oracle View that stores the Query execution time
Hi Gurus
i m using Oracle 10G in Unix. I wudiold like to know which Data dictionary view stores the execution of a query. If it is not stored then hw to find the query execution time other than (Set timing on) command. What is the use of elapsed time and what is the difference between execution time and elapsed time? How to calculate the execution time of a query.
THanks
RamIf you have a specific query you're going to run in SQL*Plus, just do
a 'set timing on' before you execute the query.
If you've got application SQL coming in from all over the place, you can
identify specific SQL in V$SQL/ and look at ELAPSED_TIME/EXECUTIONS
to get an average elapsed time.
If you've got an application running SQL, and you need to know the
specific timing of a specific execution (as opposed to an average),
you can use DBMS_SUPPORT to set trace in the session that your
application is running in, and then use TkProf to process the resulting
trace file. -
I would also like to use the teststand basic gui window wich asks for the serial number and then runs the tests without seeing the teststand environment in the background
ie I would like the test to look simple to the user without building a new gui.
Sincerely
Aik LewinHi,
You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
Once you have created your installation, install is on your new system.
The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
Hope this helps
Ray Farmer
Regards
Ray Farmer -
How to create a Macro in excel to store the excel data to Oracle Database
Hi All
Does anyone has created a macro in excel which on being run stores the excel data to Oracle database. In my project I need to create one such macro for updating oracle database with excel data and another for inserting excel records.
I tried doing this using a macro in MS access but Client wants its to be done using Excel Macro only.
Any help would be highly appreciated.
Thanks in advance..
ShikhaPlease read Chapter 19.7 Creating Selection Lists (http://download.oracle.com/docs/html/B25947_01/web_complex007.htm#CEGFJFED) of the Oracle® Application Development Framework Developer's Guide For Forms/4GL Developers 10g Release 3 (10.1.3.0)
Cheers,
Mick. -
Issue with the Authentication mode:
Hello Guru's
I have installed P6 Primavera and when I am trying to login to
http://localhost:8080/primaveraweb/action/login
It is giving the below error -
"Primavera P6 was configured to use a different authentication mode that the database selected"
I checked the authentication mode in the P6 Administrator scrren where it shows that the
Authentication
Mode: NATIVE
Web Single Sign-On
User Name Header Key: OAM_REMOTE_USER
Context Path Override: /primaveraweb
Server and Port override: http://<hostname>:8080 ----- I can see the correct hostname address.
Gurus, please help me on this ASAP.
Thanks
VenuHello Guru's,
I could able to resolve the error by following the Admin Guide.
This error is because you have migrated the PSUP database which is having the LDAP authentication mode, but the P6 Primavera is in NATIVE authentication mode.
NOTE: A configuration for P6 Web Access might include database instances that are not set to the same authentication mode as the server of P6 Web Access.
If a user connects and requests a database that is set to a different authentication mode than the server of P6 Web Access, an error message displays.
The user must select a database that matches the authentication mode set for the server of P6 Web Access.
I resolved the issue using the below steps:
Run the D:\Oracle\installers\Enterprise Project Portfolio Management\P6_70_Client_Applications\install\database\ldap-config\ LDAPCfgWiz.exe
Login as privuser for PMDB and select the authentication mode as “NATIVE”
Login as privuser1 for MMDB and select the authentication mode as “NATIVE”
Bounce the P6 Admin Server.
Thanks
Venu -
Which table/field can indicate the localization?
which table/field can indicate the localization( us or uk or china etc)?
and which abbreviation indicate the full corresponding country name, or you direct me how to find the related resouce?
thanks in advance!Hi Lui
You can have a look in oadm, has country in there.Then in your SBO Common look at table SLSD to know which country in words and not abbreviations.
Jope this helps
Maybe you are looking for
-
Cannot Connect to the iTunes Store on iPhone
I can't get itunes to open on my iphone. It says that I need to be connected to a Wi-Fi network, but I am! How can I get around this message?
-
I deleted all my thumbs and originals...
really need help!!!! I was trying to label all my photos and everything, and i put the originals and thumbs files in the trash. When i went to iphoto to view my photos, it shows all the thumbs, but when i go to view the pictures full screen, nothing
-
Has anybody succeeded in getting the Scrabble tiles app to work with Scrabble? I also have difficulty in linking an iPod Touch with an iPad via Blue Tooth. Any suggestions welcome!
-
Help limiting page totals in pagination code
HI , I have been trying to limit the output of page totals in my pagination code so I can use it at the top of the page. I grabbed the existing code from a tutorial and it works fine. I tried simply settting a page total variable and outputting , but
-
Searches showing up in foreign language
Usually it's Japanese, sometimes it's Greek. Mostly it's Google searches, but it occurs at the mozella.com website as well; the ff 3.6.15 download I received, in order to revert to ff 3.6 from ff 4 because of incompatible plugins that were important,