While closing the Photoshop document an ".exe" (or) a script should be get triggered?

Can anybody tell me the feasibility of the below process in Adobe
Photoshop:
While closing the Photoshop(CS,CS2 and CS3) document(please note that not Application!), an .exe (or) a script should be get triggered. Is this possible pals, if so, is this possible in SDK? Could you please let me know the details and samples.
Thanks,
Prabudass

You can use the automation plug-in type to listen for eventClose. See the Listener example in the SDK.

Similar Messages

  • While closing the document .exe (or) a script should be get triggered?

    Can anybody tell me the feasibility of the below process in Adobe
    Illustrator:
    While closing the Illustrator(CS,CS2 and CS3) document(please note that not Application!), an .exe (or) a script should be get triggered. Is this possible pals, if so, is this possible in Java script (or) VB script?
    Could you please let me know the details and samples.
    Thanks in advance
    Prabudass

    I'm not into scripting outside of After Effects, but most likely this will have to be VB script, not Java. Similar to a thread recently on the Photoshop forum, you'd monitor the window states and their parent/ child relationships. This might however only work in older versions, as CS3 and CS4 use Adobe-specific UI stuff that may not be accessible in that manner. On the other hand it just might by ways of the Flash panel stuff as e.g. used in Adobe Configurator for Photoshop. Maybe investigate these options...
    Mylenium

  • While starting the SAP, Disp+Work.exe is getting stopped

    Hi All,
    SAP Discovery System has been installed. While starting the SAP, Disp+Work.exe is getting stopped. But I checked MaxDB and it is working fine.
    Kindly look into the below log dev_disp and advice me the solution.
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      10
    sid        ERP
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    119
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2420
    Mon Sep 15 20:16:06 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (10 2420) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 119 successfully loaded
         shared lib "dw_xtc.dll" version 119 successfully loaded
         shared lib "dw_stl.dll" version 119 successfully loaded
         shared lib "dw_gui.dll" version 119 successfully loaded
         shared lib "dw_mdm.dll" version 119 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3910
    Mon Sep 15 20:16:11 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ORX-SAPDEMO_ERP_10                      <
    DpShMCreate: sizeof(wp_adm)          17232     (1436)
    DpShMCreate: sizeof(tm_adm)          4270848     (21248)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1544)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06E70040, size: 4929464)
    DpShMCreate: allocated sys_adm at 06E70040
    DpShMCreate: allocated wp_adm at 06E72090
    DpShMCreate: allocated tm_adm_list at 06E763E0
    DpShMCreate: allocated tm_adm at 06E76410
    DpShMCreate: allocated wp_ca_adm at 07288F10
    DpShMCreate: allocated appc_ca_adm at 0728ECD0
    DpShMCreate: allocated comm_adm at 07290C10
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 07311AD0
    DpShMCreate: allocated gw_adm at 07311B10
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 07311B40
    DpShMCreate: allocated wall_adm at 07311B48
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2047 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 2672
      argv[0] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
      argv[2] = pf=
    iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=3500
      argv[5] = -DSAPSYSTEM=10
      argv[6] = -DSAPSYSTEMNAME=ERP
      argv[7] = -DSAPMYNAME=ORX-SAPDEMO_ERP_10
      argv[8] = -DSAPPROFILE=
    iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( iwdfvm2160) [dpxxdisp.c   11799]
    DpStartStopMsg: send start message (myname is >ORX-SAPDEMO_ERP_10                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Mon Sep 15 20:16:12 2008
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 119
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Mon Sep 15 20:16:15 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1428
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3504) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2672)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Mon Sep 15 20:16:51 2008
    ERROR => DpHdlDeadWp: W0 (pid 4952) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W1 (pid 4852) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W2 (pid 5976) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W3 (pid 5000) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W4 (pid 4984) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W5 (pid 1272) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W6 (pid 528) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W7 (pid 5720) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W8 (pid 2648) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W9 (pid 5444) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W10 (pid 5032) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W11 (pid 5620) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:01 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Tue Sep 16 03:17:01 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     4952 Ended         no      1   0        0                                                                         
    1 DIA     4852 Ended         no      1   0        0                                                                         
    2 DIA     5976 Ended         no      1   0        0                                                                         
    3 DIA     5000 Ended         no      1   0        0                                                                         
    4 DIA     4984 Ended         no      1   0        0                                                                         
    5 UPD     1272 Ended         no      1   0        0                                                                         
    6 ENQ      528 Ended         no      1   0        0                                                                         
    7 ENQ     5720 Ended         no      1   0        0                                                                         
    8 BTC     2648 Ended         no      1   0        0                                                                         
    9 BTC     5444 Ended         no      1   0        0                                                                         
    10 SPO     5032 Ended         no      1   0        0                                                                         
    11 UP2     5620 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Tue Sep 16 03:17:01 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Tue Sep 16 03:17:01 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Tue Sep 16 03:17:01 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:06 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ORX-SAPDEMO_ERP_10                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (1516) (SOFT_KILL)
    Stop icman
    killing process (1256) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:1516  HANDLE:1520)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1516  HANDLE:1520)
    wait for end of icman
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:15 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:16 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:17 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:18 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1256  HANDLE:1528)
    [DpProcDied] Process died  (PID:2672  HANDLE:1504)
    DpStartStopMsg: send stop message (myname is >ORX-SAPDEMO_ERP_10                      <)
    NiIMyHostName: hostname = 'ORX-SAPDEMO'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Mon Sep 15 20:17:19 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12145]
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 1508 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 1508 (pos=3)
    SiSelNRemove: removed sock 1508
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 1508
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2420) [dpxxdisp.c   10417]
    Good Bye .....
    Thanks in advance.
    Regards,
    Suneetha

    Hi,
    Just check out your filesystem/ directory have sufficient space.
    Do paste us dev_rd as the error above " NiIRead: SiRecv failed for  "
    pasted looks like system uanble to access SAP gateway.
    Rgds
    Radhakrishna  D S

  • Error while releasing the billing document to accounting

    Dear All,
    I need your favor to resolve the below issue:
    (System SAP SAP ECC 6.0)
    User is getting the below error message while releasing the billing document to accounting in VF02:
    This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
    Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
    User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
    "Consolidated companies 151 and 186 are different
    Message no. F5080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
    Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
    Thanks in advance,
    Praveen

    Hi Murali,
    Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
    Thanks,
    Praveen

  • Run time error while closing the CRM Order using BAPI

    Hi Experts,
    Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
    I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
    For the custom program we will give input as the order number and execute it, this will close the order.
    Here close the order means assigning it to Close status as well assign the reason code.
    We have created some reason codes for closed status.
    So when the program is run the Order moves from resolved status to closed status along with reason code.
    But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
    Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
    Please find my code which have used in the custom program
    Closing the resolved SOs in the system
        CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
            EXPORTING
              objnr                     = iv_guid
              user_status          = lc_status_closed
           EXCEPTIONS
             object_not_found          = 1
             status_inconsistent       = 2
             status_not_allowed       = 3
             OTHERS                        = 4.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining status'.
        ENDIF.
    Set reason code
    build lt_subject
        ls_subject-ref_guid = iv_guid.
        ls_subject-katalogart = 'A2'.
        ls_subject-codegruppe = 'ZR000003'.
        ls_subject-code       = 'ZR33'.                      " Reason code
        ls_subject-mode       = 'A'.
        APPEND ls_subject TO lt_subject.
    build lt_ossset
        ls_osset-ref_guid        = iv_guid.
        ls_osset-subject_profile = 'ZREASON03'.
        ls_osset-profile_type    = 'G'.
        ls_osset-subject         = lt_subject.
        APPEND ls_osset TO lt_osset.
    build lt_service_os
        ls_service_os-ref_guid  = iv_guid.
        ls_service_os-ref_kind  = 'A'.
        ls_service_os-osset     = lt_osset.
        APPEND ls_service_os TO lt_service_os.
    build lt_input_fields
        REFRESH: lt_input_fields, lt_field_names.
        CLEAR  : ls_input_fields, ls_field_names.
        ls_field_names-fieldname    = 'CODE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'CODEGRUPPE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'KATALOGART'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'SERVICE_PROFILE'.
        APPEND ls_field_names TO lt_field_names.
        ls_input_fields-ref_guid    = iv_guid.
        ls_input_fields-ref_kind    = 'A'.
        ls_input_fields-objectname  = 'SERVICE_OS'.
        ls_input_fields-field_names = lt_field_names.
        APPEND ls_input_fields TO lt_input_fields.
         CALL FUNCTION 'CRM_ORDER_MAINTAIN'
          EXPORTING
            it_service_os     = lt_service_os
          CHANGING
            ct_input_fields   = lt_input_fields
          EXCEPTIONS
            error_occurred    = 1
            document_locked   = 2
            no_change_allowed = 3
            no_authority      = 4
            OTHERS            = 5.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining reason'.
        ENDIF.
        CALL FUNCTION 'CRM_ORDER_SAVE'
          EXPORTING
            it_objects_to_save   = lt_header_guid
            iv_update_task_local = lv_update_task_local
          IMPORTING
            et_saved_objects     = lt_saved_objects
          EXCEPTIONS
            document_not_saved   = 1
            OTHERS               = 2.
        IF sy-subrc <> 0.
          WRITE : 'Error at saving'.
        ELSE.
          WRITE : 'Successfully Closed'.
          COMMIT WORK AND WAIT.
        ENDIF.
    Run time error is coming at COMMIT WORK AND WAIT statement.
    Please let me know any corrections are required in the above program.
    When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
    For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
    There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
    Kindly provide your feedback.

    Hi Dinakar,
    You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
    Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
    Regards - Pawan

  • Error messege BP603 while posting the parked document budget exceeded

    Hi ,
    We are having the budget function and its for overall release.
    Budget has been relased and assigned value is less then the released budget in all conditions.
    Its throwing the error messege No BP603  while posting the parked documents. Unable to understand the reason why its behaving.
    Please let me know if anybody has faced such problem.
    We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
    Regards
    N.Raju

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Error While Releasing the Billing Document Msg No. KE/AD 243

    I am getting error while releasing the billing document
    Error No KE/AD 243
    This error comes in particular billing document only others are posted correctly.
    Rgds
    Dhiraj

    Dear Anil
    We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
    Rgds
    Dhiraj

  • While releasing the billing document error

    Dear TEAM,
    While releasing the billing document system was showing the message like NO STANDARD COST ESTIMATE COULDBE FOUND FORTHE MATERIAL.
    I have suggested to the user to release the price through ck24.At that time system is showing the message like cost has not been created for the inhouse production.
    The samething was tested in Qualiy server and the transaction was through.I have not done any price release for the samematerial.I have checked the table under VBAP the documents was made against to the samematerial.That time we have not faced any issues like this.
    Note:Material ledger concept using by client.
    Please kindly advice how to proceed further.
    Regards,
    Suma

    have you checked in ck13n if there is a standard cost estimate for the material and what status it has, if there is one? Also, what are the dates in that cost estimate? How do they compare to the date of the billing document? What does the customizing say about the selection of cost estimates for valuation of SD documents? SPRO>Controlling>profitability analysis>master data->valuation-->Set up valuation using material cost estimates
    Nikolas

  • Userexit while saving the billing document

    Hi all,
    Is there any userexit while saving the billing document..I want to define minimum invoice value in system.
    Regards,
    Puneet Makkar

    Hi,
    In preceding project, i had the same requirement.
    Price condition : copy from std price for minimum value.
    Use condition category (for specific determination price for invoice).
    In price procedure : apply requirement to active only for invoice (std = 22).
    Re determination of price during creation of invoice :
    use RV61AFZA with the value of condition category to adapt pricing type (ex : X).
    modify copy rule (Tcode VTFL) for item : use new value for pricing type (ex : X).
    Regards,
    Lionel

  • Runtime error while saving the billing document after creation

    hi friends ,
    while saving the billing document after creation , the fallowing discriptive runtime error has come.
    Run time errors    -
      SAPSQL_INVALID_TABLENAME
    Except.              -
      CX_SY_DYNAMIC_OSQL_SEMANTICS

    Dear Unnam,
    There may be several reasons...
    1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
    2. u may not be entering proper data to the input fields.
    3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
    Please check it...
    Thanks N Regards
    SettyKY

  • Encountered error while updating the payment document

    Hi Guys,
    I encountered an error while updating the payment document of one of our bank account. See below error message:
    Error: Unable to lock the record. Cause: The record is being modified by another user
    thanks,
    gracie

    Hi Vikas,
    Repeat the changes you are trying to make one step at a time and make sure you click on update in both the series screen and the document numbers screen every time.
    I've faced this issue and doing this helped.
    Regards,
    Hamsa

  • What are the img setting to be fullfilled while copy the Sales document typ

    Hi What are the setting to be fullfilled while copy the sales document type and item category.
    Note:  I have already copied, but unable do the PGI(Post goods issue),  and Billing.
    Thanks
    Prasanna

    Hi
    Answer for this Question.
    we have set the copy control for sales order type and delivery and billing
    Regards
    Prasanna R

  • Error while closing the open purchase order for MRP run

    HI expets,
                     We are facing issue while closing the old purchase order(18.12.2007) for MRP run, if we are clicking delivery completed for the particular line item ,system is showing the error NET PRICE MUST BE GREATER THAN ZEROthough we have made GR and IR aganist the line item an value is also showing in the purchase order history tab, but in the condition tab there is no value showing for the particular line item .Kindly suggest the way forward.
    regards
    Karthick sundaram

    one thing for sure, you cannot proceed without maintaining proper conditions in the PO.
    Why they are not there or not anymore there is probably caused by customizing or vendor master data changes.

  • Display Do u want save changes or not? message while closing the window

    Hi All,
    I have one requirement.I developed one form that contains 4 windows.
    I entered in the 3rd window and i have made some changes but not saved.when i close 3rd window it is not giving any message like 'Do u want save changes?'after closing the 3rd window cursor will go to 2nd window.if i open 3rd window again it is propmting the message(Do u want save changes or not?).How can i get this message while closing the 3rd window?
    i have written the following code in app_custom body
    IF (wnd = 'WINDOW1') THEN
    app_window.close_first_window;
    ELSIF (wnd = 'WINDOW3') THEN      
    lv_wnd_status := get_window_property('WINDOW2',VISIBLE);
    IF lv_wnd_status = 'TRUE' THEN
         go_item('BLOCK2.ORDER_NUMBER');
         set_window_property ('WINDOW3', visible, property_false);
    ELSE
    app_window.close_first_window;
    END IF;
         ELSIF (wnd = 'WINDOW2')
    THEN
    lv_wnd_status := get_window_property('WINDOW3',VISIBLE);
    IF lv_wnd_status = 'TRUE' THEN
    set_window_property ('WINDOW2', visible, property_false);
    ELSE
    app_window.close_first_window;
    END IF;
         ELSE
    app_window.close_first_window;
    END IF;
    Can anyone give me some idea.
    Thanks in Advance
    Edited by: DhanaSurya on Apr 27, 2010 9:41 PM

    Iis this the only code which you used to hide/display window?
    Might be some navigation is happening in your form. Like if there is relationship between window2 and window3's block and when you access the window2 then you try to move to the next reocrd and then you are try to go to the WINDOW3's block.
    Or there is any CLEAR_BLOCK built-in bieng use in you form.
    -Ammad

  • WIJ20005 error occurred while editing the WebI document

    Hello Everyone,
    An error occurred while editing the WebIntelligence document.
    The error don't occur when you run again.
    Do you know the cause of this problem?
    Please give me advice how to investigate.
    Error message is as follows:
    The current request has returned corrupted data. Contact your administrator (ERR WIJ 20005)
    Version: 12.4.4.1557
    Application server:
    http://xxx.xxx.xxx.xxx:80/AnalyticalReporting/cdzisapi.wis
    Stack trace:
    java.lang.NullPointerException
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.a(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.reArrange(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentRects(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneScrollLayout.calculateTabRects(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneLayout.calculateLayoutInfo(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentLayout(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.a(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.access$1900(Unknouwn Source)
    at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$f_.componentAdded(Unknouwn Source)
    at java.awt.Container.processContainerEvent(Unknouwn Source)
    at java.awt.Container.processEvent(Unknouwn Source)
    at java.awt.Component.dispatchEventImpl(Unknouwn Source)
    at java.awt.Container.dispatchEventImpl(Unknouwn Source)
    at java.awt.Component.dispatchEvent(Unknouwn Source)
    at java.awt.Container.addImple(Unknouwn Source)
    at javax.swing.JTabbedPane.insertTab(Unknouwn Source)
    at com.jidesoft.swing.JideTabbedPane.insertTab(Unknouwn Source)
    at javax.swing.JTabbedPane.addTab(Unknouwn Source)
    at com.businessobjects.wp.tc.query.TCQueryTab.createUniversTab(Unknouwn Source)
    at com.businessobjects.wp.tc.query.TCQueryTab.init(Unknouwn Source)
    at com.businessobjects.wp.tc.query.TCQueryTabManager.addQueryTab(Unknouwn Source)
    at com.businessobjects.wp.tc.query.TCQueryTabManager.updateWithDP(Unknouwn Source)
    at com.businessobjects.wp.tc.query.TCQueryPanel.createQueryTabs(Unknouwn Source)
    at com.businessobjects.wp.tc.query.TCQueryPanel.load(Unknouwn Source)
    at com.businessobjects.wp.tc.TCMain.initClient2(Unknouwn Source)
    at com.businessobjects.wp.tc.TCMain.initClient(Unknouwn Source)
    at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknouwn Source)
    at java.lang.Therad.run(Unknouwn Source)
    Environment:
    [Server]
    - Windows 2008 R2 Enterprise
    - BOXI3.1 FP4.4 (IIS)
    [Client]
    - Windows7 SP1
    - IE8
    - JRE6 Update21
    Regards,
    Mayumi

    Hi, Yuvraj
    Thank you for advice.
    >What is the default editing tool set in Prefererences --> WebIntelligence?
    >Do you get issue with Interactive mode?
    >
    >If Advanced mode, have you tried uninstalling and re-installing Java
    >and check?
    It's Advanced mode.
    This error occur sometimes.
    And if you re-run after an error occurs, the error does not occur.
    So, I guess this error has affected the Java cache file, not the Java software.
    How do I check what Java cache is corrupted.
    >How many reports are giving this issue?
    This error occurs in various reports, but I din't know the number of reports.
    >Is this issue coming on all machines or single machine?
    This error has occurred in several machine.
    >Do you face a similar issue when using Webi Rich Client?
    This error occur sometimes, and I usually not use Webi Rich Client.
    Try to check, but be difficult.
    Regards,
    Mayumi

Maybe you are looking for

  • How to install oracle developer 10g on rhel 5

    hi, i have install oracle database 10g on rhel5 now i want to install developer 10g on this machine so plz send me any link where i can know step by step installation of oracle developer 10g on rhel5. thanks

  • Partial Payment (with invoice reference) for Invoice-based items

    Hi Gurus, I'd like to make partial payments to credit memos while "Include partial payment" is activated.  However, if i activate "Include partial payment, partial payments for invoice-based items are no longer possible (partial payment amount is dis

  • Need Advice...What's the best document file app out there?

    Need some advice!! I am a med student and for my classes I need a file app where I can download and store powerpoint, word docs that the professor gives us as our notes! How can I transfer them and save them on my ipad via a doc app?? Also, is there

  • Colours in result vastly different from preview

    I've just installed the latest Photoshop CC. Whenever I go to Image → Adjustments → Anything, the result turns out to be completely different from what I see in the preview. For example, when I use Hue to colourize a picture: If I do the same using t

  • Macbook Pro (2011) freeze and lag when watching youtube etc

    My macbook have start to freezing and are general slow in my point of view. Really frustrating, how can I fix this!! ? Tried to fix permisions and so on