Error messege BP603 while posting the parked document budget exceeded

Hi ,
We are having the budget function and its for overall release.
Budget has been relased and assigned value is less then the released budget in all conditions.
Its throwing the error messege No BP603  while posting the parked documents. Unable to understand the reason why its behaving.
Please let me know if anybody has faced such problem.
We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
Regards
N.Raju

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Similar Messages

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • While posting the parked document, we are getting the error Message No.0034

    Dear Experts
    First we created Parked Document.
    After that when we try to post above said parked document, we are getting the below error:
    "Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Procedure
    Check your batch input data."
    Can any of you please provide the solution.....
    Thanks and Regards
    PVSRG

    But if you clearly observe the error which you have got, it says the Budget period is not on the screen.
    Check and try once again
    "Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Thanks

  • Error 'Specify account number' while posting a parked document through FBV0

    Hi,
    I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
    I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

    Hi,
    Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
    Try same scenario in the development its be useful
    Regards,

  • Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

    Hi,
    I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
    Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
    2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
    I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
    Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
    Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
    Regards,
    Deepak.

    Dear Praveen,
    please check into IMG if You defined the WT type You are using for Your Comapny code:
    IMG --> Assign Withholding Tax Types to Company Codes
    I hope this helps.
    Mauri

  • Post the Park Document

    Hi,
    When we post the park document, the following error Message showing.
    No Batch Input data for Screen SAPMF05A 0302
    What is the problem and how to solve this?
    Thanks in advance

    Hello,
    Refer SAP Note 1226243 - Parking the fields BSEG-VERTT, BSEG-VERTN, BSEG-VBEWA
    Regards,
    Ravi

  • Reg:how to post the parked documents using BDC

    Duplicate message in General deleted.  Please do not post the same question in more than one forum.
    Hi
    I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
    Please suggest me a solution for this.
    Thanks,
    Satish
    Edited by: Matt on Dec 3, 2008 7:40 PM

    Hi Rob,
    Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction.  Please send the code.
    Thanks,
    Satish

  • Bapi or FM for posting the parked document

    Hi All,
    Can someone suggest for FM or Bapi for posting the parked document??
    Regards,
    Shobana.K

    try this...
    BAPI_ACC_DOCUMENT_POST
    BAPI_ACC_INVOICE_RECEIPT_POST
    BAPI_INCOMINGINVOICE_PARK 
    BAPI_INCOMINGINVOICE_CREATE
    MRM_PARKED_INVOICE_POST

  • Error (Short Dump) while posting any Material document

    Hello All Experts,
    I am facing an error (short dump) while doing all material document related transactions (for example MIGO,MB1A etc) . I am getting the below message:-
    Short text of error message:
    Document number 1000 5000000000 2009 was already assigned
    Earlier, I had posted some material documents using the same transactions.
    Kindly help
    Regards,
    Atul

    Hi Atul,
    Please use T-code OMBT to check the number range status of material document. You can click on the 'Intervals' button to check the 'Current number', the last material document number the system was created so far. Try to change the 'Current number' to a number greater than 5000000001, save the change, and post material document again.
    Hope it can solve your issue.
    Cheers

  • Call transaction FB70 while posting the MIRO DOcument

    Dear All,
    My Requirement is , When ever the user posts a MIRO document for a particular PO document type, then automatically a customer invoice(FB70) has to posted automatically in the back end.
    If there any BAdi or user-exits are there for the above requirement, please tell me.
    Thanks In Advance.

    Thanks for your reply
    yah....i have seen in PO in that  VAT is V0 0% tax but if i went seen in withholding tax  there is no amount in the withholding tax  filed
    Can please suggestion on the same
    Reagrds
    vamsi

  • Error in posting the park doc

    SAP EXperts,
                             I created 1 AUC account, and parked one expenses for that AUC thru cash transaction, my doc type is AA.While posting the park doc i am getting the following error
    "Formatting error in the field COBL-PRCTR"
    How to resolve this issue
    Thanks & Regards
    Appan

    Hi,
    First go to transaction FBV0 and change the expense line item for account aasignment in field Profit Center.
    Hope you have PCA active in your system.
    Since your expense line item will have an account assignment to PCA.
    Please check and post again, if still the problem exists.
    Thanks,
    Srinu

  • How to post a PARK document with Withholding Tax

    Hi All,
    I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
    "Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
    The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
    My entries are :
    29J Vendor a/c  Dr.
    50   XYZ a/c
    If i using F-02 and not parking ;then it is getting posted.
    Note: Line Item is a special G/L Indicator
    Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

    Hi Parag,
    Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
    But,when posting the parked document ,it is asking for Section Code.
    The error message displayed is:
    "Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

  • I am not able to post the MIRO Document with reference of PO

    Hello friends
    My user while posting the MIRO document TDS (service tax ) amount not appering in the MIRO screen
    But last month it was working fine.
    before that i have checked out  vendor master in that they given tax code properly.
    can any body please give me suggestion on the same
    Regards
    vamsi
    Edited by: asuvamsi on Mar 2, 2010 4:53 PM

    Hello friends
    Thanks For all my problem was resloved
    Solution is
    An message has been occuring like withhold tax has been refreshed.  it is just an information message not an error message.  this message will trigger when the trans. type is non project type activity.  No back end process has been disturbed due to this message. it just passing the information to the user.
    we changed the trans. type to manufacturing activity and it is working fine.
    I hope it ll help in future
    Thanks and Regards
    vamsi

  • Issue while posting physical inventory document

    Hi Team,
    While posting a physical inventory document system is giving error message saying that
    HU exists at another point in the warehouse. Clear the HU first
    Message no. /SCWM/GM751
    here is my scenario: As per the system bin is empty, while doing physical inventory we found and counted one HU in the same bin. while posting the same physical inventory document we are getting the above error message. as per the system this HU available in some other bin.
    could you please let us know is there any process which i am missing before posting the PI document.
    while posting the PI document is it not possible automatically HU get move from one bin to other bin?
    Thanks
    Mastan

    Hi  kmastanrao
    All above suggestion given need to check.
    1. Check HU available in WH. In EWM monitor and HU details.
    And after finding the status of HU and use as you need in your process.
    second if needed I can provide HU table in EWM which can be used.
    Regards
    Suraj

  • Not able to post a parked document in G/L

    I created a G/L document using FB50. After Simulating it I parked the document. When I try to post the document using FV50, the "Post" tab is not active in the parked document. Can anyone suggest how to post this parked document?
    Regards

    No matter what transaction you use, the Post command will show as greyed out.
    That's simply because to post the parked document, choose the icon "Save as completed" either from the screen icon, or from the top menu (Document --> Save as completed).
    The document will be saved and effectively will be posted. You can then go to FB03 (or any other view txn), and use the same document number to view the posted document.
    Rgds
    Gulshan

Maybe you are looking for