While Executing Query with out giving any inputs to selection variables

Hi,
While Executing Query in the Query Designer with out giving any inputs to selection variables. I got an error message in german Language this is translating of german to English .
In the reading of the data, mistakes appeared. Navigation the value is contains possible "New Delhi" of feature 0CITY40 at that
10. ten place a mistake Notification Number BRAIN 290
This is very urgent can you please help me .
Thanks & regards
Subba Reddy.

Double click this error message it will give you more details. Post that.

Similar Messages

Please suggest a select query / sub query with out using any subprograms or

source table: Three columns ORIGIN, DESTINATION,MILES
Origin      Destination Miles
Sydney      Melbourne      1000
Perth      Adelaide      3000
Canberra      Melbounre      700
Melbourne      Sydney           1000
Brisbane      Sydney           1000
Perth      Darwin           4000
Sydney      Brisbane      1000
out put :Three columns ORIGIN, DESTINATION,MILES
Duplicate routes are to be ignored so the output is
Origin      Destination      Miles
Sydney      Melbourne      1000
Perth      Adelaide      3000
Canberra      Melbounre      700
Brisbane      Sydney           1000
Perth      Darwin           4000
Please suggest a select query / sub query with out using any subprograms or functions/pkgs to get the out put table.

Hi,
user9368047 wrote:
... Please suggest a select query / sub query with out using any subprograms or functions/pkgs to get the out put table.Why? If the most efficient way to get the results you want involves using a function, why wouldn't you use it?
Here's one way, without any functions:
SELECT     a.*
FROM           source_table a
LEFT OUTER JOIN      source_table b ON   a.origin          = b.destination
                                      AND a.destination      = b.origin
                      AND a.miles          = b.miles
WHERE   b.origin > a.origin    -- Not b.origin > b.origin
OR     b.origin IS NULL
;If you'd care to post CREATE TABLE and INSERT statements for your sample data, then I could test this.
Edited by: Frank Kulash on Nov 6, 2012 7:39 PM
Corrected WHERE clause after MLVrown (below)

Re execute query with out using a time

Hi
I want to refresh data in many based tables blocks automaticly with out using a timer, lest say ever 2 m refresh the data, is there is any soluation for that
best regards

Hi!
If you use a timer, the mouse cursor will not move...
But may the content of an active item get selected, if the timer elapse.
This is just happen, if you have a form open with a running timer
and call another form with the open_form build-in.
When the timer in the calling form elapse, a context switch to
the calling form occurs and when the focus come back to the called form,
may the current-item value is getting selected. But the mouse cursor is not moving!
May you try to requery your block with a timer and see what's happen.
Regards

Error while executing Query with Variable.

Hi All,
I have written a query to fetch values from some user tables and sap tables. The query is as below.
select a.docentry,a.u_scname,e.block,e.[City],
e.[Country], e.[State1],
e.[StreetNo], e.[ZipCode],
e.[Building], e.[Cellular],a.[U_WONo], a.[U_DocDate],
a.[UserSign], b.[LineId], b.[U_Des],
b.[u_SDes], b.[U_UoM],
b.[U_Qty], b.[U_Rte],
b.[U_Tamt], a.[U_PrjName], a.[u_WO_PB],
a.[U_WO_UL], a.[U_WO_FC],
a.[U_WO_PYT], a.[U_WO_COP],
a.[U_WO_TRMT], a.[U_WO_DocSub],
a.[U_WO_ADV], a.[U_WO_OCondition],
a.[U_WO_PRPBY], a.[U_WO_RCMBY],e.[CntctPrsn],
(T4.[WhsName]+ '-' + T4.[Street] +'-' + T4.[Block]) as 'Work Address ',
T4.[Building], T4.[City],
T4.[ZipCode], T4.[U_PMCNT], T4.[WhsName], e.Taxid0
from [@e360_owor] as a join [@e360_wor1] as b
on a.docentry = b.docentry
left outer join
( select c.cardname,d.TaxId0,d.Taxid1, c.block, c.[City],
c.[Country], c.[State1],
c.[StreetNo], c.[ZipCode],
c.[Building], c.[Cellular], c.[CntctPrsn] from ocrd
as c join crd7 as d on c.cardcode = d.cardcode
where d.TaxId0 is not <b>null</b> ) as e
on
a.U_SCName = e.CardName
left outer join OWHS T4 on T4.[WhsName] = a.[U_Prj]
where
a.U_WONo = '[%0]'
In this code, when the variable is assigned to field U_WONo, then I get an error
Must Specify A Table To Select From. Statement 'Service Contractors' (OCTR) (s) could nto be prepared.
But when the values for variables are hard coded, the query executes.
I have been working on it from long time, but same error exists. Could anybody help resolve the same...
I am using SAP B1 2007 B, patch level 15.
Thanks in advance,
Regards
Rohan

The error messages may be misleading. With complicated queries with parameter request I frequently saw references to service contract (or something other).
Sometimes SBO does not manage correctly variables in complicated queries and there is a note about the workaround to solve the problem:[Note730960|https://websmp130.sap-ag.de/sap/bc/bsp/spn/sapnotes/index2.htm?numm=730960]

Error in while Executing Query in the Query Designer

Hi,
I created info Set based two info object and three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM BP Sales View Info Object and Data Store Objects are BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.

Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK

Collection: (80004005) Execute: Query timed-out

Hi,
Recent days im facing a strange issue like the SCCM clients are not reporting the full Software inventory, so because of that we were unable to query using the software inventory details.
The strange part is, while checking the logs "Inventory agent.log" it states "Collection: (80004005) Execute: Query timed-out".
I wanna find what is the job of the Software inventory cycle and how to see at what point they stuck scanning...
Any information helping me to proceed further with my investigation would be much appreciated.
Thanks,
Nana

Thanks for the link Garth...
We have scheduled software inventory to run on Sundays so that it should not impact client PC's performance. I agree it takes long time, but at some point we might require some information from those files. I also tried to create few test machine, but its difficult
to duplicate this issue in them. Whenever we create a new machine, it reports good :(
I was querying the machines who has collected "powershell.exe" files using software inventory cycle, i was able to fetch about 91% of the machines where as 9% has not. I tried to run a powershell query (Full software inventory) remotely on the machine where
we are facing issues collecting software inventory. Monitoring the logs and i came up with this error.
Here my question would be as its working on most of the machines why aren't they good on the rest. Even if we try to re-install the client, same status. Maybe because of the machine performance?
Thanks for your help...

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Error while executing query through rsrt

hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AM

Hi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav

Executing query with arguments- issue when parameter value contains '&'

My application inserts 'First name', last name' and last upd date to the table. it inserts all the data properly. Next level I access the information along with other tables using same arguments. But it is not fetching any data. I noticed it happens whenever the '&' is included in the parameter (first name). eg:
'Margaret & John'. From the logs I noticed that first name it is not taking what I passed. It just stripping the first name from '&' onwards and taking only 'Margaret'. Here is the example from the log. You could notice only 'Margaret' instead of 'Margaret & John' in place of first argument.
<2007-03-29 11:35:51,425> <DEBUG> <default.collaxa.cube.ws> <Database Adapter::Outbound> <oracle.tip.adapter.db.DBInteraction executeOutboundRead> Executing query with arguments [Margaret , Cohen, 2007-03-29T11:35:51-06:00]
Appreciate your help if you could give me a hint how to resolve this issue
Thanks
Reddy

Hi Reddy,
from the log it looks like the DbAdapter received the value as 'Margaret '. Because parameter binding is used by default, the database shouldn't try to interpret the & as it is inside a bind variable.
Could it be that the & is getting dropped somewhere else? Marc was suggesting you put that value inside a CDATA section or escape it. He probably showed that but when he hit Post Message it displayed the escaped & as &. I think we should find out where that & got dropped though. Normally BPEL will preserve it.
Thanks
Steve

Error while executing query in BEX

Hi All,
I am experiencing an issue while executing query on FIAR_C03.
"Abort No Values could be determined for variable 0P_FVAEX
Error specify a value for 0P_FVAEX
Abort system error in program SAPLRRKO and form APPEND_KHANDLE_1-01-
I had searched SDN forums and found the similar error which is inculded in the below link:
Bex Variable
However, the solution specified is only for a particular 3 queries. Also the solution is that the 3 queries(Which are having errors) are replaced by another 3 queries.
Can anybody help us in this regard.
Regards
YJ

hi JY,
try 858477 steps for other 'infected' webtemplates ?
try implement correction in 660514 ?
(also search other notes with keyword 0P_FVAEX
e.g 585202)
hope this helps.

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

Execute query with in workbook

How to execute query with in workbook??
Regards,
Vivek
Please search the forum
Edited by: Pravender on Apr 26, 2011 1:03 PM

Hi Vivek,
Click on Addin Tab in Analyzer, Select the workbook from open workbook icon.
Once the workbook opened, click on variables icon. Then variables popup screen will come. Input the variables and click ok.
Hope this will help you...
Thanks,
Chenna.

Error 0DAT while executing query

Hello All,
While executing query in query designer I am getting following error.
Component 0DAT version A does not exists in the database.
Can any one please let me know how to rectify this error.
Points will be rewarded.

Hello,
Thanks for your prompt reply.
I am looking for 0DAT in BC (object type) but could not able to find it.
I am new in BW :
Do I have to search BC in r/3 and replicate in BW then install and activate it ?or I will find in BW only?

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

CANT execute query with parameter on user defined tables using query genera

Dear All,
I have problem when executing query with parameter on user defined tables using query generator.
It seems SBO cannot accept parameter to query user defined tables.
I've tried these:
SELECT T0.U_Status FROM [@ST_PR_H] T0 WHERE T0.U_Status = [%0] --- this FAIL
I try to pass the value directly without using parameter and It works
SELECT T0.U_Status FROM [@ST_PR_H] T0 WHERE T0.U_Status = 2 --- this SUCCESS
This one works
SELECT * FROM RDOC T0 WHERE T0.width =[%0] --- this SUCCESS
and this one works too
SELECT * FROM RDOC T0 WHERE T0.width = 595 --- this SUCCESS
Is there anyone can help me ....???
Thanks,
Alfa

I generated this code using query wizard ....
SELECT T0.[U_Status] AS 'Document Status' FROM [dbo].[@ST_PR_H] T0 WHERE T0.[U_Status] = (N'2' )
and replaced the (N'2' ) with [%0]
SELECT T0.[U_Status] AS 'Document Status' FROM [dbo].[@ST_PR_H] T0 WHERE T0.[U_Status] = [%0]
and It worked ......
Thanks 4 all .....

While Executing Query with out giving any inputs to selection variables

Similar Messages

Maybe you are looking for