While in connection with charge there is current shocking, why

while in connection with charge there is current shocking, why

The most common reason for this is that the client only connects to localhost. I would check the client is trying to connect to the right host (not localhost or 127.0.0.?) Thanks for the advise.
Many of those lines of code are GUI code which has nothing at all to do with network communications. You might find it easier if you just extracted the >>communications code (which is probably less than 100 lines) and tested that by itself. You might also persuade somebody else to look at the code, >>too, if it wasn't long and full of irrelevant things. It's for my final project that why i keep it with the GUI form
Thank youo all for your kind reply.
The problem was solved it's an issue it the client part
thanks again and sorry to bother u guys.
Regards

Similar Messages

My iphone is not responding, while connected with charger only apple logo is appeared no any other response , what i have to do

my iphone is not responding, while connected with charger only apple logo is appeared no any other response , what i have to do

while connecting to itunes to restore, i am getting error. UNKNOWN ERROR 3194 WHAT I HAVE TO DO

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

Error while making connection with remote oracle database

Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.

Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:186)
        at OracleJDBC.main(OracleJDBC.java:13)
Advice.

I cannot connect with facetime in my imac. Why?

I cannot connect with facetime in my Imac. Why? I have an apple id and password which i use for my ipad and iphone. Why does it not work for the imac?

i had the same problem but i just kept quitting and opening the app and putting in my information a whole bunch of times and eventually it worked

)My iphone not connecting with PC (There is not phone logo in iTune page when i connect with PC

My iphone not getting connected with PC.
There is phone logo on iTune page when connect with my PC
I could not able to down load songs from my PC to iphone.
Please help!

What version of iOS is iPhone running?
What version of iTunes is on your PC?
Allan

Unable to find BW Query while creating connection with universe designer

Hi colleagues,
I've got BOE XI 3.1 SP2, Integration for SAP 3.1 SP2 and the following inssue )
Some of BW queries that were previously released for external access and succsefully used for WebI reports now cannot be find while creating a connection in universe designer. Those are still releasde for external access but I'm not able to find some of them in the list, tried search as well.
Has anybody faced the same problem?
Thanks

Hi Ingo
SAP GUI               710 Patch 15
BI Components      7.10 Patch 1001
BW 3.5 Components     3.50 Patch 6
Actually as I figured out there were some reasons to manualy set req.status to 7 for that info-provider
I used massive regeneration for needed queries eventually,
BR Max

ClassNotFoundException while establish connection with mysql

Hi friends,
While registering the JDBC driver for MySQL by following statement,
Class.forName("com.mysql.jdbc.Driver").newInstance();
It throws Runtime error as ClassNotFoundException for "com.mysql.jdbc.Driver" class.
I've set the following environment variables in Windows to use MySQL Connector/J,
C:\j2sdk1.4.2_04\jre\lib\ext\mysql-connector-java-3.0.17-ga-bin.jar\.
Can anyone tell me whats the coz for this problem?And how i resolved this?
Regards,
Sachin Warang.

it should be:
Class.forName("org.gjt.mm.mysql.Driver");

My iPod nano's bluetooth won't connect with my Macbook Pro after pairing, why?

Just purchased a new 7th generation iPod nano, synced it up to my iTunes account using the cable and charged it fully.
All working fine, except for when I tried to then connect it via bluetooth.
My Macbook Pro (which also has all the latest updates) was able to discover my iPod and when prompted to pair I did so and was presented with a code to verify on my iPod nano's screen. I clicked to confirm, and that is where the journey stopped.
when I try to connect it tells me it has failed and asks if it is within range, when it was sat an inch away.
I have tried reseting the iPod, forgetting the connection and pairing again several times, and tried to pair and connect whilst the cable was attached.
I'm assuming it's the iPod that is at fault as my mouse is fine.
I have run out of ideas.

Just sync, I'm not sure what else it is suppose to be able to do as I am yet to achieve a connection.
I am assuming it should be able to sync my library, playlists, etc.

Why will my Classic 20GB Ipod no longer connect with my mac 10.6 ? Why will it only connect with the dock attached to my stereo system?

w

FYI, I've reposted this question in the iTunes forum. I thought that was a more appropriate thread. If you do have some insight, please post it to
http://discussions.apple.com/thread.jspa?threadID=470231&tstart=0
Thanks
imac G5 Mac OS X (10.4.6)

Why iPhone 4 does not connect with the charger or mac but charges when it is powered off and connected?

My iphone 4 doesn not connect with charger and mac book. however it does charges when it is powered off and connected with charger. Any clue ?

I hope you are having a great and sorry to learn that you are having this issue;
Since I could not check what version of the laterst firmware, I hope you don't mind doing the following in your printer:
Updating the All-in-OneFollow these steps to enable automated Web Services updates, and to update the product firmware.
Important : The HP product must connect to a wireless network with an active Internet connection to receive updates. However, the product does not need to be connected to a computer.
On the upper left side of the HP product control panel, touch the Web Services icon ( ). The product control panel displays the Web Services screen.
Touch Settings . The product control panel displays the Settings menu.
Touch Product Updates .
Touch Check for Product Updates Now .
Wait for any updates to download and run.
If you using Win XP or later please run this tool to see if you get any errrors Click here
Is your printer on warranty? if you do not know you can use this tool; GO HERE.
Hope this helps and let me know if I can assist you any further I will do my best to provide you assistance;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

IPhone 4s - Charges in Dock but not with Charger...help!?

Hi, I just got an iPhone 4s around a month ago and its behaving quite strangely when it comes to charging.
Initially charging worked fine when I used the wall charger that came with the phone, but about a week later it began to stop charging (it would show as charging, then quickly stop and switch in between) - I tried another USB cable that I had from an iPod and this made no difference.
Following this, I've been charging the phone from my PC (which was working fine) however, this suddenly stopped working as well a few days ago. I alternated between my old USB cable and the new one when it was charging ok - but both have stopped working now.
When connected the phone up to my Laptop, it makes the noise like it has been connected, however, iTunes isn't opening and the Laptop doesn't recognise that the phone is connected - all the while, still no charging.
All the while, I've been charging (and am currently charging) the phone using a dock for my iPod - it charges without any issues.
I've tried the hard reset (assuming holding the home button and on/off button is the way to go) but this makes no difference - unfortunately, both USB cables are also no longer charging my iPod when connected - however they working without issue before.
Is it possible that something has potentially caused something like a short in the cables? One is brand new, so I wouldn't expect that to be the issue, but could the charger have done anything?
Any suggestions of what I could do to get this up and running would be greatly appreciated, as ideally, I don't want to be dragging a speaker/dock with me everywhere I go!

Just to add to this, I've just tried my old usb cable with my iPod in my Laptop and that works fine now and charges the iPod.
New cable does likewise....

EIS connection with Shared services failed.

HI All,
I m using EIS for data load ,and getting error while test connection with Shared service. while its connectiong with essbase with default user "admin"
Error :
java runtime environmant may not be set appropriately on the server machine...0[main] INFO httpclient.HttpMethodDirector - Failure authentication with BASIC 'weblogic server@Servername:58080 EIEINIT failed. Eleinit:java.lang.Exception: Login to EIE on Server thru CSS Token failed.'
Please suggest.
Thank you.

As per my knowledge , shared services support from EIS has been removed from 9.3 on.

Is there an adapter that will charge my 3g while I'm connected with USB2.0?

My 3rd generation iPod, like many others here, no longer connects via firewire- even after trying every trick mentioned here AND switching cables, computers etc.
I realize that the 3g cannot charge via USB2.0 AND will rapidly discharge when connected to the USB2.0 port (powered of course).
My question is:
Is there a plug or adapter that will allow me to connect my iPod to my mac via USB2.0 ( thus mounting it and making it accessible with iTunes etc ) and charge/power it at the same time. Maybe, something with an extra cable that goes to a wall transformer like the palm pilots used to have.
My iPod works fine as a player it just won't connect with Firwire and won't stay charged long enough, (2-5 minutes) while connected with USB2.0. YES, the battery seems to be fine. It will play for over two hours on its own. Also, my Apple care ran out in June and I can't afford a new iPod right now.
An adapter like I described would get me over the hump until somebody figures out what happened to all the 3rd generation iPods this summer!
Thanks!

It may not be compatile with the iPad. iPads are not specifically mentioned in the compatibility specs here:
http://store.nike.com/us/en_us/pd/fuelband-se/pid-924485/pgid-924484
See the following page for more info & compatibility. I do not believe there is any type of adapter that will get you compatibility. The iPhone and iPod touch are the only devices being mentioned as compatible.
http://nikeplus.nike.com/plus/support/#answers/detail/article/fuelband-compatibl e

While in connection with charge there is current shocking, why

Similar Messages

Maybe you are looking for