While installing Clusterware cannot see raw shared partitions
I have made 4 extended logical drives from EMC shared storage to be visible from my two nodes on 64bit windows 2003 server. During Clusterware installation while selecting the disks for OCR and Voting file, I cannot see the raw shared volumes.
The following is the output of cluvfy utility for component shared storage accessibility,
# runcluvfy.exe comp ssa -n node1,node2
Verifying shared storage accessibility
Checking shared storage accessibility...
Shared storage check failed on nodes "node2,node1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
I also get exectask.exe encounter a problem and needed to close meassage aswell.
[email protected]
The issue is resolved. I formatted the shared disks with NTFS file system. Then deleted the partition and recreated extended logical volumes and now the shared storage is accessible from the clusterware instalation for the selection of ocr and voting files.
#cluvfy comp ssa -n node1,node2
The above command on 64bit win2003 servers gives error. This is due to bug 6007675. Base Bug number is 4714708. So the solution is to continue with the installation and ignore the error message.
[email protected]
Sami Malik
Similar Messages
-
Win 7, itunes 11 just installed - I cannot see the text since text is black and so is the background. Help.
Bump
-
Urgent: Cannot see shared volumes while installing Clusterware
I have made 4 extended logical drives from EMC shared storage to be visible from my two nodes on 64bit windows 2003 server. During Clusterware installation while selecting the disks for OCR and Voting file, I cannot see the raw shared volumes.
The following is the output of cluvfy utility for component shared storage accessibility,
# runcluvfy.exe comp ssa -n node1,node2
Verifying shared storage accessibility
Checking shared storage accessibility...
Shared storage check failed on nodes "node2,node1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
I also get exectask.exe encounter a problem and needed to close meassage aswell.
[email protected]The issue is resolved. I formatted the shared disks with NTFS file system. Then deleted the partition and recreated extended logical volumes and now the shared storage is accessible from the clusterware instalation for the selection of ocr and voting files.
Thanks anyways.
[email protected] -
Clusterware install cannot see raw partitions during ocr/votedisk selection
I have made 4 extended logical drives from EMC shared storage to be visible from my two nodes on 64bit windows 2003 server. During Clusterware installation while selecting the disks for OCR and Voting file, I cannot see the raw shared volumes.
The following is the output of cluvfy utility for component shared storage accessibility,
# runcluvfy.exe comp ssa -n node1,node2
Verifying shared storage accessibility
Checking shared storage accessibility...
Shared storage check failed on nodes "node2,node1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
I also get exectask.exe encounter a problem and needed to close meassage aswell.
[email protected]One more important point I noticed is that for RAC on windows 2003 Enterpriser Edition Server 64bit it is must that one should automatically mount the shared disks. For this do the following on command prompt.
c:\>Diskpart
Diskpart> automount enable
This command will automount the shared storage on the server. This should be done manually as it is not enabled on windows environment and it should be done only once.
[email protected] -
Other Mac users cannot see my shared public folder
Other users on my network cannot see my Public shared folder. I can see their public folders no problem. I can connect to my computer from another Mac and "connect as" myself and see folders.
I have File Sharing turned on. Permissions look copacetic. It says I'm the owner of the shared folder.
IT's has a profile on this same machine – its Public folder shows up for other users. When I set up a new account profile, its shared folder shows up no problem.
It may, just may, have to do with me changing my short login name after migrating to this machine. Problem is, I have no idea how to confirm that. Finder shows proper ownership and permissions in the info windows. I think there's something deeper down in the account system level that is wrong, but I don't know where to look.squareman wrote:
It may, just may, have to do with me changing my short login name after migrating to this machine. Problem is, I have no idea how to confirm that. Finder shows proper ownership and permissions in the info windows. I think there's something deeper down in the account system level that is wrong, but I don't know where to look.
If you have admin rights, you can create a new account in System Preferences and see if that shared folder shows up on the network. If it does, then it could be related to changing short name (which I have heard you aren't suppose to do). If not, it may be something in the system. Give that a try and post back what happens. -
Error while installing Clusterware for RAC Oracle 10gR2?
Hi ,
I am installing clusterware 10.2.0.1 on Windows XP Service Pack 3.While installing i got the below errors.
Checking operating system requirements ...
Expected result: One of 5.0,5.2
Actual Result: 5.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows XP Version 5.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
How can i overcome this problem? Can anybody helpme.
Thanks
RajeshWhich edition of Windows XP are you running? Home edition is not supported for Oracle products.
-
Cannot see RAW files after re-loading CS3.
My computer crashed so I re-loaded cs3 from the disks, but now it says that it won't update as Adobe is no longer supporting it. I cannot see my RAW files from my Canon d30 and d40. In the past when I had this problem, I just downloaded something and it fixed it, but that doesn't seem to be working this time. Are those update files available and usable anywhere or am I trying the wrong ones?
CaroleinStayton wrote:
I cannot see my RAW files from my Canon d30 and d40.
You mean the EOS 30D and EOS 40D?
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The EOS 30D requires Adobe Camera Raw 3.4
The EOS 40D requires Adobe Camera Raw 4.2
Photoshop CS3 shipped with ACR 4.0. So your 30D Raw files are readable now but you need an update for the 40D.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
So update to ACR 4.6 and you should be set
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4041 -
Cannot see home sharing in itunes
I have set up home sharing in both my computers but cannot see the home sharing menu in itunes
Hi Jacob0612,
Thanks for visiting Apple Support Communities.
You may find this article helpful for troubleshooting, if the Home Sharing menu isn't appearing in iTunes:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Best Regards,
Jeremy -
ROOT.SH failed while installing clusterware, Need Help
Hi,
I am creating 2 Node RAC, while installing the clusterware I had to run the two scripts at the end....RootInst....done yet I am stuck with root.sh , However I tried it on Node2, It worked perfect...configured clusterware and alll services are up on Node2..
Here is what I got on Node1.
USM driver install actions failed
/u01/app/11.2.0.3/grid/perl/bin/perl -I/u01/app/11.2.0.3/grid/perl/lib -I/u01/app/11.2.0.3/grid/crs/install /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl execution failed
Can some one please help, If it can work on Node2 Why not on Node1..
Your help will be really appreciating.
My OS is AIX 7.1
And Clusterware Im trying to install is 11R2.
=========================1- Have you ran the orainstRoot.sh on the two nodes before start running the root.sh?
2- Have you started running the root.sh on the "local node" FIRST (i mean, the node from where you´re installing the GI)?
Edited by: user6418608 on 07/03/2013 11:35 -
Cannot see others shared libraries
Before I updated my ipad 1 to iOS 5, I was able to view and play not only my shared library, but the other shared libraries on my network through the iPod app. I did this by clicking on the library tab in the upper left hand corner and simply selecting whos library i wanted to access. Since i have updated to iOS 5, I can only see my shared library and no one elses. How can I see all of the other shared libraries??
Hi bltj2000,
Welcome to Apple Support Communities.
We have a great article that goes over the ways you can share music with iTunes:
iTunes: How to share music and video
http://support.apple.com/kb/ht2688
Best,
Jeremy -
Mac Cannot see Windows HDD Partition/ Windows cannot reformat disc?
I have installed boot camp and windows 7 64 bit on my mac pro dual quad core.
I have 3 drives.
#1 is 1 TB and partitioned in 2 logical drives so that one is windows NTFS and one is Mac. The mac OS does not see the windows drive. In fact it appears in disk manager as UNMOUNTED and FAT when in fact its NTFS.
#2 is the drive that shipped with the mac, partitioned into 2 drives, one which boots windows (bootcamp) and 1 boots OS X. No problems.
The problem is drive #1 holds all my vido from my camcorder so I need the mac to recognize the windows drive and read the data. I copied all the data off of the NTFS partition and tried to format it in Windows. Windows says its "in use". It is not in use since Windows boots from BOOTCAMP on a different physical drive. It won't let me ignore the error, if I try it waits a few seconds and repeats the error.
I tried to erase the partion in disk manager, same issues. Even after the mac erases it into any format (Mac, Fat32, etc...), the Windows disk console will resfuse to format it claiming that its "in use".
Any ideas?
Anyone else have the same problem? I think it has to do with the hidden 200 MB partitions that windows 7 creates and that the MAC may unintenionally mess with.DIngo Dave 69 wrote:
I am running Snow Leopard and on my seperate windows 7 machine I can see and connect to my mac. However I cannot get the Mac to connect to the Windows 7 machine. Even home sharing is not working on itunes.
Can anyone help?
Maybe
On the Win7 machine,
1. Ignore everything to do with Homegroup.
2. Go > Computer > Users > User; right click on User and chose Share with > Specific people; and Set to share with a specific individual or Everyone—both with Read/Write permission.
3. Go Control Panel > Network and Sharing Options > Advanced sharing Settings, and Turn on network discovery, Turn on file and printer sharing, Turn off public folder sharing , and Turn off password protected sharing (unless sharing won’t occur without turning it on).
4. Restart (probably not necessary, but I’d do it).
On the Sno machine,
1. Go System Preferences > Sharing > Check File sharing > Go Options > Enable SMB sharing.
2. Go System Preferences > Network > Select Airport or Ethernet depending on what you are going to be using. I am assuming you will be using wireless below. Let me know if not true.
3. Having selected Airport, select ask to join new networks and show Airport status in menu bar.
4. Click advanced > click remember networks this computer has joined > Click Wins > Enter the ip address of your Win7 machine in the WINS server box > Enter the Win7's workgroup name in the workbook box unless it already is there (look in the drop down menu too). In all likelihood the name is workgroup, but check on the Win7 machine.
5. Restart (probably not necessary, but I’d do it).
Try to connect to your Win7. Use Go menu > Connect to server. In trying to connect, type smb://ipaddress (of the Win7 machine). If, for some reason, you are asked to, input a user name and password, then use you user name and password for the Win7. Don't save anything to Keychain now and actually never for making network connections. -
Lion and others Mac 10.6, I cannot see Screen Sharing on the network
Hello all,
Since I've install Lion on the Mac Mini I cannot acces (and see) on the network in Screen Sharing. I can access all other Mac on 10.5.8 and 10.6.x easily. In the prefs all is exactly like before I upgrade this OS...
Is someone can give me an issue.
Thank and have a great day!
Paul DionneI'm not sure what you are and are not seeing from which computers on the network.
Note that whatever your prefererences were before has no bearing on fixing your problem.
Which computers can you see, and from which computers.
What type of file sharing do you have enabled on the 10.5.8 and 10.6.x computers, AFP or SMB? -
Cannot see home sharing via iTunes 10.6.3 on Windows 8
Good morning!
I have the latest version of iTunes installed on two iMacs, as well as on a PC running Windows 8 Consumer Preview. I am able to turn on home sharing on all three systems. The two iMacs can see each other's music libraries and playlists, but not the music or playlists on the Windows 8 PC. Furthermore, the Windows 8 PC does not acknowledge the existance of either of the iMacs. I have made sure that the Windows firewall settings include the iTunes and iTuneshelper executables, as well as turned off the Windows firewall completely, but this has not helped.
Is anyone else experiencing a similar problem with iTunes 10.6.3 on Windows 8 Consumer Preview? Any ideas or suggestions on how I might make this work?
Thank you,
GeoffIf you have a firewall on your router, which you likely do, the Firewall on your computer is not a great loss. However you should be allowed to just allow communications over certain ports and keep your firewall on.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
Refer to your router manual/manufacturer for any settings that are specific to that model. -
Cannot see my shared USB hard disk's connected on my Mac-mini on my Macbook
As you all can see, I'm a Mac user since 1989, i've don't like working on a windows-computer.
But i've got a problem since I'm using Mac os X 10.5. If i try to make a connection with my Macbook pro to my Mac-mini (my Mac-mini has two USB hard disks) i cannot select the USB hard disks. But my WIDOWS computer has no problem to approche these disks???? Can anyone help me????Hi WillemH777-NL and welcome to the discussion forums.
On the MacMini open system preferences-->sharing
then select 'File Sharing' from the Service column. Then under Shared Folders make sure your 2 usb drives are listed, if not click the + sign and add them.
then click the 'options' button
make sure Share files and folders using AFP is checked
make sure Share file and folders using SMB is checked
Then switch on the names of the users and the mac can use the smb service.
then click Done
Now see if you can access the mini's sharepoints. -
Cannot see Raw Nikon NEF images in finder windows
I had a problem with my Macbook pro so I had to re-install the operating system, which is Leopard.
Now I can't see the my Nikon NEF images in the finder windows, they only show the jpeg pictures.
I remember this was a problem over a year ago and somehow I resolved it, but I can 't remember how. I'm doing the usual thing such as click VIEW - OPTIONS - ALWAYS OPEN IN ICON VIEW - but this does not seem to work.
Can anyone remind me what to do?The issue should only occur if you shoot raw. Currently OS X can only display/read certain RAW camera formats. These are OS level, meaning iPhoto, Preview, Mail, Aperture and others are effected. However adobe products are different because they use Adobe Camera RAW.
I would expect JPEGs TIFFs and PSDs, both thumbnails and files, to view fine. RAW files will not view from the D300, but the D200 is supported.
There is no way of knowing when support for the (not-so-)new files will be available. Rumor has it it will be 10.5.2, but only Apple knows that. You can head on over to the Aperture forum and read to see if some have work-arounds.
Maybe you are looking for
-
iMovie not showing SOME of my iPhoto movies. Why?
I import all my movies into iPhoto with the same Canon camera. No problem there. In iMove, the "iPhoto videos" section has stopped adding/showing new movies. I have a bunch that were added recently that are simply not showing up. They are exact;y the
-
What is the easiest way to sync the libraries on each device if they are pulling from an external hard drive without doing it manually? Also without using iCloud due to bandwidth issues (we are a moving vessel with VSAT bandwidth). OR is there a way
-
Hi I feel awful for asking this but how do I insert padding for a single cell. As far as I know the code should look something like this: cellpadding= "0 10 0 10", but that's probably slightly or completely off the mark and I'm not sure where to put
-
Ayuda con el error 213:11
Descargue las versiones de prueba de Adobe Photoshop y Flash cs6. Las primeras veces abrían bien pero ahora cuando las abro me manda un mensaje donde me pide que reinicie el equipo porque hubo un problema en la configuración y el error 213:11. Ya rei
-
Converting a pie chart to an object that is merged?
I have created a simple pie chart as shown below (a) and in the end want it to look like a pie chart with a hollow hole in it (b). However, the pathfinder's minus front tool only works with 2 objects. The pie chart data consists of two pieces (dark t