While reading from the pl/sql cursor i got "Invalid column index" exception
Hi,
I got the "Invalid column index" exception while reading from the cursor.
Please advice.
Thanks in advance
siva
I suppose one (or more) index in your query is in a bad state.
Possible solutions: rebuild (with 'ALTER INDEX <index> REBUILD ...')
drop and recreate (it's the same as above, but a little more long)
Similar Messages
-
I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP
have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again
-
Message failing in SXMB_moni----Error while reading from the secure store
Hi,
The scenario is as below
A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
The message is failing in sxmb_moni while trying to write the file in the folder.
The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
Below is the error seen in moni.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Call Adapter --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
Below is Trace log:
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace><!-- ************************************ -->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace><!-- ************************************ -->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace><!-- ************************************ -->
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace><!-- ************************************ -->
<Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry changed: / (SECSTORE,031) </Trace>
<Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine </Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->
Is this because PI system is a system copy of another system ?
Regards,
SnehaError while reading access data (URL, user, password) for the Adapter Engine
Check out Michal's reply:
Re: URL for Central Adapter Engine
As you said there was a system copy it may be the case that some things were not configured properly -
Error occured while reading from the device
I need help!!! whenever i try to update my iphone to the new 1.1.1 version, i get an error message saying "error occured while reading from the device" the same message comes up when i try to restore it. i havent mod'd my phone in any way. does anyone know whats wrong or how to fix it?
I have the same problem. Was a solution ever given ?
-
i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
See if that fixes your problem. -
DPM encountered an error while reading from the recovery point used for recovery.
Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
How to do the paging while reading from the file !!!
I've able to display the contents of the file in my jsp as a tabular form. I want to apply the paging concept in my jsp page. As i did in my database project there i's sending the next value as a parameter and it works.
But when i retrieving the value from the file then i'm not able to get particular values anyhow i'm using the concepts of getLineNumber() but unable to get the previous one worked. I want to diplay only the first 20 contents of the file then, by clicking the next button he should be able to view the next 20 contents of the file. Please help me out for this problem. If possible send me the codes too it'll very helpful for me.
in advance thanks....I hope the following code will help u.
If your bean is:
public class yourBean
private int startIndex ;
private int pageSize ;
private int endIndex ;
public void useBean()
startIndex = 0;
pageSize = 10;
endIndex = pageSize;
public setters and getters for each of the above.
In servlet :
doGet/doPost:
yourBean uBean =
(yourBean)sess.getAttribute("urBean");
int sIndex = uBean.getStartIndex();
int eIndex = uBean.getEndIndex();
int pSize = uBean.getPageSize();
if (sIndex = 0)
//means first time
dont do anything
if ((sIndex >0)&&(sIndex <
uBean.getRecords().size())))
eIndex = sIndex + pSize - 1;
sIndex = eIndex;
//update Indexes to the bean
uBean.setStartIndex(sIndex);
uBean.setEndIndex(eIndex);
sess.setAttribute("urBean",uBean);
res.sendRedirect("yourJSP.jsp",req,res);
In yourJSP.jsp:
<jsp:useBean id="urBean" type="...." scope="session"
/>
<%
int sIndex = urBean.getStartIndex();
int eIndex = urBean.getEndIndex();
for (int
i=sIndex;(i<=eIndex)&&(i<urBean.getRecords().size()))
out.println(....);
if (eIndex >= urBean.getRecords().size())
out.println("NExt");
else
out.println("<a href=yourServlet>Next</a>");
if (sIndex <= 0)
out.println("Previous");
else
out.println("<a href=yourServlet>Previous</a>");
%> -
Please help me i need new music and i can't do anything because of this. I tried uninstalling and reinstalling itunes but the problem still exists.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try a differen USB port and cable.
- Try on another computer to helpo determine if you have an iPod or computer problem
- Restore from backup. See:
iOS: How to back up
Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Yeah, The title says it all.
It's happend before so i tryed to reset my phone (didn't realise it deleted all my music which.. kinda anoyed me)
now it's doing it againJust been watching the sync process, i get the error just after "finishing Sync"
-
Error while reading from device
I just upgraded from a 3gs to the iPhone 4 32GB. I upgraded to the newest iTunes. The phone is still using iOS 4.0.
When syncing large movies that worked fine on the 3gs, I get the message "Attempting to copy to the "my phone name" failed. An error occured while reading from the device.
Everything else synced fine, and some small homemade movies synced fine. Just the 2 that I had installed from "data discs" I got with DVDs won't sync. They play fine in iTunes.
Any thoughts????
GeneProblem solved... after reading around on the Internet I tried some ideas. The one that fixed the problem was the fact that I had a 6 foot usb extension cable on my system (not front facing usb ports). I plugged the iPhone data cable directly into the back of the PC and it fixed the issue.
Thanks
Gene -
Java.sql.SQLException: Invalid column index in database adapter
I have a query that works fine if I run the sql in a JDeveloper SQL editor, but I get a "java.sql.SQLException: Invalid column index" error if I paste it in a database adapter. If I put this query in the adapter:
select <column>
from <table>
where <column> in (select
trim( substr (txt,
instr (txt, ',', 1, level ) + 1,
instr (txt, ',', 1, level+1)
- instr (txt, ',', 1, level) -1 ) )
as token
from (select ','||#bindVariable||',' txt
from dual)
connect by level <=
length(#bindVariable)-length(replace(#bindVariable,',',''))+1)I get the error. But if I just put the sub query in the adapter as:
select
trim( substr (txt,
instr (txt, ',', 1, level ) + 1,
instr (txt, ',', 1, level+1)
- instr (txt, ',', 1, level) -1 ) )
as token
from (select ','||#bindVariable||',' txt
from dual)
connect by level <=
length(#bindVariable)-length(replace(#bindVariable,',',''))+1the error goes away. Does anyone know what might be causing this?
Thanks in advanceHi,
Could you please make sure your binding style(Oracle Positional,Oracle named..etc) of the Seeded VO and Custom Vo are same.
This is the option you will get when you are extending your vo. So make sure that both are same.
You can refer the below link too
VO extension leads to "Invalid column index" exception
Thanks
Bharat -
Hi All,
The Actual query to perform is below.
SELECT name,number from emp WHERE CASE WHEN :1='T' AND term_date IS Not NULL THEN 1 WHEN :1='A' AND term_date IS NULL THEN 1 WHEN :1='ALL' THEN 1 ELSE 1 END = 1;
I have tried in DB adapter like below as a parameter for :1 as #vInputParam
SELECT name,number from emp WHERE CASE WHEN #vInputParam='T' AND term_date IS Not NULL THEN 1 WHEN #vInputParam='A' AND term_date IS NULL THEN 1 WHEN #vInputParam='ALL' THEN 1 ELSE 1 END = 1;
Getting Error code :17003 .java.sql.SQLException: Invalid column index error.
Please suggest me on using ':' bind character in DB adapter Select Query SOA11g.
Can someone help me on this please?
Thanks,
HariHi,
Could you please make sure your binding style(Oracle Positional,Oracle named..etc) of the Seeded VO and Custom Vo are same.
This is the option you will get when you are extending your vo. So make sure that both are same.
You can refer the below link too
VO extension leads to "Invalid column index" exception
Thanks
Bharat -
ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msiAll sorted now just needed to repair itunes from control panel
-
The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?
Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/ -
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
can someone help me i have a apple id on my pc and i forgot about it when i got my phpone so i want to convert my music from pc to phone can i do this?
-
Restrict creation of Change Document without a change request
Hello Experts, Is there a way within Charm to restrict the creation of a change document through crmd_order or a business transaction and instead force the creation of all change documents to start from a change request? Some users are bypassing the
-
CRM list of queues registration information
Hi, I am new to CRM and have some questions regarding BDocs and queues in CRM, 1. We found some queues starting with CSA* in inbound getting stuck for long. Found the reason to be that since these queues are not registered, they are not processed. Do
-
Finished writing amazing code that compiles but won't run properly
I finished writing this code for someone and it compiles but it does not run properly. Anyone see any problems? Any help would be gladly appreciated. /* Program is for the Coconut Grove Palace Building. This program keeps track of the building occupa
-
Missing track, big problem :-(
I've just finished recording an interview I did over the phone, on my PowerBook using GB. After the 30 min interview is over I save and everything is peachy. I then 3 min later try to shut GB down and gets an error-message (unfortunately I cant remem