CRM list of queues registration information

Hi,
I am new to CRM and have some questions regarding BDocs and queues in CRM,
1. We found some queues starting with CSA* in inbound getting stuck for long. Found the reason to be that since these queues are not registered, they are not processed. Do these BDocs really need to be processed? 2. If yes then what all queue names are to be registered in CRM. What each of these inbound queues does?
3. If not needed, then how can we delete these queues?
4. Any step - by step document for registering Queues or on BDocs?
Point to note is data is transfered from CRM to BW.
Appreciate your help...
Regards,
Madhav

>
Kai Blanke wrote:
> As I said: As long as the CSA queues exist, there will still be BDocs in the MW in an intermediate / yellow state, as the CSA queues are used for internal asynchronous storing of BDocs during processing. If you delete the queues, you will need to delete the BDocs also, and eventually get data inconsistencies depending on where you distribute your data. If you are deleting them, your MW will get stuck with hanging BDocs which is not an alternative.
> Therefore you should register the queues and have the entries processed. As these are processed internally, the processing is pretty fast; a nice server should process some tenthousands per hour.
>
> The only way of not generating such queues is by stopping the MW, but this is only an option for a standalone system.
We also have the same problem. The CSA* queues are not registered in SMQR. We have queues dating back to May of 2008. Will it be safe to delete them? Or should we still process these queues? We have 51,000++ messages on the inbound queue right now. Any help on this will be very much appreciated. Thanks!

Similar Messages

Registration information is invalid

My problem is the same as one previously posted but I'm not looking for a clean uninstall but a way forward to using software I already have i.e. Premiere Elements 1.0 and 2.0 - help please.
To save me re-typing I have copied below the same thread previously started
After motherboard upgrade, I can't start Premiere Elements 1.0. Gives error message "Registration information is invalid. Please reinstall Premiere Elements." Reinstallation goes fine but after computer restart, program returns same error message. When attempting to uninstall the program, the uninstallation stops at 3/4 way - gives error message "Error 14.02.Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Premiere Elements\1.0\Preset. Verify that you have sufficient access to that key, or contact your support personnel." I am the only user and have full administrator rights. I would like to manually uninstall the pogram but need a list of all the keys in the registry and elsewhere.

<[email protected]> wrote in message news:[email protected] > Thanks, but from other threads I've read with related > problems I think I'll just give up on Premiere - not > worth the hastle and cost Just be aware you're judging a product by grotesquely outdated versions. That all said, I'm still using APE 2.0 on one of my newer computers with no problems.

Re-installing for a User whose Registration Information is Unknown

I've just sold my ibook G4 on ebay. I want to erase and install for the new user, whose personal information and desired "short name" is unknown to me.
How do I erase and install and bypass the set-up assistant (which includes a mandatory registration information) that appears before the installation process?
Thanks for any light shed on this question!

Joelius:
Welcome to Apple Discussions.
Here are a couple of procedures posted by Kappy that should accomplish what you want done:
This is the simple method and doesn't involve erasing the hard drive.
Boot from your OS X Installer. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Next, boot to single user mode. Restart the computer and after the chime press and hold down the COMMAND-S keys until the computer starts up to a black screen with white type.
3. At the prompt, type the following commands, each command followed by the Return key:
/sbin/fsck -yf
mount -uw /
rm /private/var/db/.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when you reboot, it will send you through the Startup Wizard.
This is the long method:
Follow these instructions step by step to prepare a Mac for sale:
First, back up the data:
1) Shut down all Virtual PCs. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
2) Clone to an external drive using Carbon Copy Cloner.
Next, prepare the machine for the new buyer:
3) Deauthorize the computer in iTunes! Deauthorize both iTunes and Audible accounts.
4) Remove Open Firmware passwords
5) Turn the brightness full up and volume nearly so.
Install a fresh OS:
6) Insert the OS X install CD/DVD.
7) Restart the computer while holding down the C key to boot from the CD/DVD.
8) Run Disk Utility from the file menu and erase the internal hard drive (optionally zero all data).
9) Install OS X.
10) Reboot the computer.
11) From the welcome screen, you can skip the registration step by typing command-Q.
12) When prompted, create an account (it will be an admin account).
13) From your new admin account, configure networking.
14) Then use Software Update to bring your system and all of it's applications up to date.
15) From Disk Utility, repair permissions on the new volume.
Now delete the account you just created:
16) Boot from a different volume (e.g. a firewire drive, if available)
17) Clean up the image using the following terminal commands:
prompt> rm /Volumes/<imagevol>/var/db/BootCache.playlist
prompt> rm /Volumes/<imagevol>/var/db/volinfo.database
prompt> rm -r /Volumes/<imagevol>/var/vm/swap*
18) Now you can get rid of the admin account you used to set up the machine Use the terminal:
prompt> nicl -raw /Volumes/<imagevol>/var/db/netinfo/local.nidb -delete /users/<admin>
prompt> rm -r /Volumes/<imagevol>/Users/<admin>
prompt> rm /Volumes/<imagevol>/var/db/.AppleSetupDone
19) Shut down and ship it to your buyer. When they get it, it will boot to the Welcome screen just like a factory Mac, except that it's better because it's completely up to date.
With acknowledgements to Kappy
Good luck.
cornelius

Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

Hi All,
I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
I have set the authentication scheme to Oracle Application server Single Sign On.
When i run the application i am getting the below error.
Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
Please help me to resolve this.
Thanks and Regards,
Suhas

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

Error in portal_sso_redirect missing application registration information:

Hi,
I am getting the following error message, when i run any of my APEX Page. Please help me to resolve this issue.
Error in portal_sso_redirect missing application registration information:
p_partner_app_name:g_listerner_token:HTML_DB:stbp5.oracle.com:80
please register this application as described in the installation guide.
What is the issue? What is the fix for that?
Regards
Balaji S

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

How to get additional field from the second list base on lookup information column ?

Hi everyone,
Currently I created a SharePoint hosted Apps project and I need to know how can I get additional field from the second list base on lookup information column. example List1 Have 2 columns column1 and column2(Lookup Information from list2 (category)),
List2 have 3 columns title, and category, and color. so how can get the title and color from list2 base on this lookup information column (SharePoint Hosted apps and Javascript code)? that is possible?
Best regards,
------------------------------------------------------------ ---Tola---

You can build one custom lookup control. Refer to the following post
http://www.stuartroberts.net/index.php/2012/10/03/enhanced-lookup-field-part-1/
Alternatively, try the following solution from codeplex
http://sp2010filteredlookup.codeplex.com/
http://filteredlookup.codeplex.com/
--Cheers

Error "Registration information is invalid" when you start Premiere Elements 7 (Windows)

Issue
When you start Adobe Premiere Elements 7 for the first time, Premiere Elements returns the error message "Registration information is invalid. Please reinstall Adobe Premiere Elements."
Solution
Do one of the following solutions:
Solution 1: Install Premiere Elements 7 using the Premiere Elements 7 serial number.
If you purchased Premiere Elements bundled with Photoshop Elements, you may have used the Photoshop Elements serial number included in the pack to install Premiere Elements. Uninstall Premiere Elements and reinstall Premiere Elements using the Premiere Elements serial number.
Note: The Premiere Elements serial number starts with the number set 1143. The Photoshop Elements serial number starts with the number set 1057.
Solution 2: Use a Company Name with 40 single-byte characters or fewer, or 20 double-byte characters or fewer.
When installing Premiere Elements, you are asked to provide a user name, a company name, and a serial number. While the company name field is not a required field for installation, if you choose to enter data, do not enter a name that contains more than 40 single-byte characters or more than 20 double-byte characters.
Note: A single-byte character is any character in the standard ASCII character set. English language characters are all single-byte characters. Double-byte character code uses two bytes to represent one character. The double-byte character set was developed for the Japanese, Chinese, and Korean characters sets. Many extended ASCII characters are also double-byte.
Solution 3: Install Premiere Elements to a location that does not contain extended ASCII characters in the file path.
Do not install Premiere Elements to a location that uses extended ASCII characters in the file path. Extended ASCII characters include characters such as , –, ›, †, ‡, ‘, Ÿ.
Note: The default installation path for Adobe Premiere Elements does not contain extended ASCII characters.

Thanks. I thought of that. But won't I get whammied for registration again? I just registered this at adobe last month after rebuilding a crashed system. In other words, will Adobe know that I've uninstalled it, and therefore have an available license? Thanks for the welcome. I've been a Studio premium user for 3 years, and now that my product is no longer supported....I need support!
Thanks.

Homesite keeps asking for registration information

I have been using Homesite 5.5 for several years. I was using it successfully in Windows 7, 64 bit. I recently upgraded my desktop to Windows 8, 64 bit, and when I went to use Homesite for the first time since the upgrade, it asked for my registration information, including serial number, as if it hadn't been registered. After I entered it, it asked for the serial number of the program I had upgraded from, which I also entered. It then brought up the registration screen again, followed by the previous serial number screen, etc. After going through this three or four times, I was finally able to get into the program, but after I closed the program and tried to open it again, the same thing happened. Even though I have Dreamweaver (and the entire CS 5 Design Premium suite), I prefer to use Homesite, and want to find out how to get it functional again. I assume this is something to do with the registry, but have no idea how to fix it. Any suggestions would be appreciated.

Hey Folks, I think I have found a solution - even if I cannot prove if it can be reproduced on any other machine:
After having the same Problem I tried several workarounds - and suddenly one crazy idea I had worked out:
Run Homesite under "compatibility mode"***
Enter registration information
Homesite will run - but most of the menu bars won't appear. Don't mind: compatibility mode was only necessary once to remember the registration information...
Close Homesite and switch back to normal mode
Homesite will start and stop asking for registration info...
This worked well on my Windows 8.1 Pro 64 Bit System - I hope, it works well with all your Systems too! Homesite is such a perfect simple editor and I'd badly miss it if it would not run on my system...
*** For compatibility mode:
Open the Homesite program folder in Explorer and look for Homesite.exe
Right click on homesite.exe --> properties
Select "compatibilty mode"*
* I am using a German Windows and am not quite sure, if "compatibility mode" is the correct translation into English. If not, look for something similar...
Good luck to all of you Homesite-Lovers!

Supplier Registration Information

Hi Everybody,
I have couple of questions on supplier registration. We are implementing ROS on SRM 5:
1. Is the supplier registration information searchable? In other words can I write a report to get all suppliers who have registered themselves for certain categories? If the information is not searchable how can I make the information searchable?
2. Is it possible to use Supplier Registration to gather quality & certification information periodically? Let's say i have 100 suppliers who initially registered in ROS. I send out detailed questionaire that also captures quality and certification information. After a year I want to check with these suppliers if quality and certification information they submitted are still valid?
3. If bullet#2 is possible, is it possible to extend the functionality in bullet#2 to vendors that have been created in the R3 system (without having these vendors to first register themselves first).
4. Can bullet#3 be automated (i.e depending on when the supplier registered every year I would like to send out the quality and certifications automatically)?
Any help you can provide will be highly appreciated.
Thanks
Venkat

Ramki -
Thanks for your quick response. Want clarification on your point#1:
- The information in BUPA (that can be viewed through BP txn) is only generic in nature. Where can we see what categories the vendor signed up for or certifications the vendor says he has that were provided in the surveys?
Appreicate your help.
Thanks
Venkat

Satellite A505 - How can I retrieve the registration information

I purchased a Toshiba A505 in March 2010. At this time I registered the product with Toshiba. This laptop has been stolen. How can I retrieve the registration information. Unfortunately I do not have the serial or product number.
Thank you.

Hi
You should get in contact with Toshiba using the Stolen Units interface.
http://eu.computers.toshiba-europe.com/innovation/generic/STOLEN_UNITS_SUPPORT
Here you should go to point: *DEREGISTER*
Hope I could help you.
Greets

Full list out of compressed information

Hello,
I'm looking for an idea to get a full list out of compressed information.
The data looks like
rank count value
1 36 100
2 12 50
What I would like to get via sql is something like
rank count value
1 1 100
2 1 100
36 1 100
37 1 50
38 1 50
48 1 50
Someone an idea, how to do it?
Regards
Carsten

Using Maxims Select and replacing dual with the all_objects table
SQL> with t as (
2 select 1 rank#,36 count#,100 value from dual union all
3 select 2,12,50 from dual
4 )
5 -- End test data
6 , t1 as (
7 select rownum rn
8 from all_objects
9 where rownum <=(select sum (count#) from t)
10 )
11 select row_number() over(order by rank#,rn) rank,1 count,value
12 from t, t1
13 where t1.rn<=t.count#
14 order by rank#,rn;
 RANK COUNT VALUE
 1 1 100
 2 1 100
 3 1 100
 4 1 100
 5 1 100
 6 1 100
 7 1 100
 8 1 100
 9 1 100
 10 1 100
 11 1 100
 RANK COUNT VALUE
 12 1 100
 13 1 100
 14 1 100
 15 1 100
 16 1 100
 17 1 100
 18 1 100
 19 1 100
 20 1 100
 21 1 100
 22 1 100
 RANK COUNT VALUE
 23 1 100
 24 1 100
 25 1 100
 26 1 100
 27 1 100
 28 1 100
 29 1 100
 30 1 100
 31 1 100
 32 1 100
 33 1 100
 RANK COUNT VALUE
 34 1 100
 35 1 100
 36 1 100
 37 1 50
 38 1 50
 39 1 50
 40 1 50
 41 1 50
 42 1 50
 43 1 50
 44 1 50
 RANK COUNT VALUE
 45 1 50
 46 1 50
 47 1 50
 48 1 50
48 rows selected.
SQL>

Why am I having to re-enter my registration information each time I open the application?

Hi All,
I purchased Apeture with my Macbook three years ago and have just recently decided to utilize it. EVERY time I open the program I'm prompted to enter my registration information. I'm entering the info each time, but would love not to! (I registered the product in an attempt to make the dialog box go away to no avail.) Any ideas?

First of all, are you using an administrator account, when you are entering the serial number? Aperture needs to write the information to the system library, not the user library. Try to log in from an admin account while entering the serial number. If that does not help, you may have a corrupted "ProAppSystemID" file or Aperture cannot write to the System Library.
First check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
Check the permission on the folder "Library", then "Application Support", then "ProApps". You (as admin) need to have read/write access to all flders along the path.
Regards
Léonie

Listing current queues in memory...

Hello!
Is it possible to get a list of all the names of queues, that are created with the Obtain Queue function, in a running program?
I just want the names of the queues, not of the elements within them.
The Enrichment Center is required to remind you that you will be baked, and then there will be cake.

tst wrote:
Short answer - no, you have to maintain such a list yourself.
Longer answer - I think the Desktop Execution Trace Toolkit can list the queues, but I don't have it, so I'm not sure.
Agreed!
Not all queues have names by the way.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

List of Queues and Notifiers

Dear Sir/Madam,
1) I would like to be able to obtain a list of all queues and notifiers in memory. How to do so?
2) I would like to be able to change the behaviour of the queue. Instead of holding and waiting for an element to be read out of a full queue (when a new element in to be inserted), I would like to be able to push out the oldest element.
Any suggestions?
Thanks!
Regards
Albert

Thank you all.
Thans for the VI, but unfortunately I could not read it (version too high). However, I found "Smart Buffer" and "Recent History" VIs in the "Search Examples". Unfortunately, these are not applicable since I need to generate the queues and notifiers in undefined number of instances.
What I eventually did:
1) I would like to be able to obtain a list of all queues and notifiers in memory. How to do so?
Used a functional global variable VI which stored the names, as well as created/destroyed queues.
2) I would like to be able to change the behaviour of the queue. Instead of holding and waiting for an element to be read out of a full queue (when a new element in to be inserted), I would like to be able to push out the oldest element.
I used notifiers:
a) I call a VI that returns the status of the notifier, and I read all the available notifiers from it.
b) I append the new data to the one obtained from the notifier, and cut the result to limit the length of this "buffer".
c) I call a Send Notifier VI, which puts the new data set into the notifier.
This way is possible but uncomfortable...
DEAR NI Tech Support,
Please respond to the questions, and let me know, if there are more elegant solutions (e.g. reading a property node for the list of queues or notifiers, or writing a property node for setting the behaviour of the queue).
Thanking you in advance.
Sincerely
Albert Lysko
Message Edited by alysko on 12-10-2007 06:48 AM

Registration Information

My home has just been robbed and my dear PowerBook G4 and iPod 60GB have been stolen.
I want to find my registration information and report them stolen so that if and only if someone tries to re-register my stolen computer and iPod, it should flag.
Is there anyway to find it out??
Mac OS X (10.4.7)

Hi, Kevinmtl. Your original purchase invoice and your original Powerbook box will both have the Powerbook's serial number on them. If you didn't save those and you didn't write the number down anywhere else, too bad. I don't know whether iPod paperwork and packaging shows the serial number or not.
If anyone is stupid enough to try to re-register equipment that has already been registered in your name, they won't be able to. Most thieves are aware of that and won't try (and what they'd hope to gain by registering it is also pretty hard to imagine). Apple's advice for people whose equipment has been stolen is to report it to the local police. Apple maintains no registry of stolen equipment and will not participate in your efforts to recover yours, unless the police contact Apple directly. That isn't part of Apple's business.
Since the chances of your recovering your stuff without having installed "call home" reporting software on the Powerbook are negligible, you'd probably do well to file a police report and then spend your energy on (1) finding out whether your homeowner's or renter's insurance will cover the losses, and (2) changing all your credit card and bank account numbers, passwords and access codes that might be compromised and lead to identity theft, which could cost you dozens of times more than replacing your equipment. And if you do replace the equipment, file the paperwork away where you can find it if you need to.

CRM list of queues registration information

Similar Messages

Maybe you are looking for