While scheduling Error message

Hi,Friends,
While scheduling my maintenance plan its displaying warning like this:
"Error calculating cost do you still want to save?
How to resolve this.I hope you will help in this regard
Regards,
K.Sunil

Hi Sunil,
As You said it is a warning message i mean its not an error that stops the process flow of your scenario , the warning might be due to insufficient data in components or the Activity based costing.once recheck the costing fields the warning message might be rectified.
And you can save maintenance plan and save it the scenario will run without any error.Hope you problem will be resolved.
Regards,
Bharat

Similar Messages

Schedule - Error Message

Hi All,
I'm running a webi report on schedule mode and keep getting this error message for the report which was running good for few days:
Prompt - No Default everything is optional, Date Vraiable Prompt daily scheduled based on Customer Exit variable(Automated).
BO Report Statistics: 200 SECONDS
"A protocol message was rejected because it was too big (more than 100663296 bytes). To increase the limit (or to disable these warnings), see CodedInputStream::SetTotalBytesLimit() in google/protobuf/io/coded_stream.h."
By seeing the above statistics of the report which used to 4 min approx, now throwing the above error message.
BO SP9 Windows Only Detail Objs used in Layout and Key Figures as less as 36 Key Figures.
Searched the forum tried all but still no luck.
Thanks,
-Dinya

Does it run when you run the report manually or throws the same error? Was something changed in the BO environment recently (Like patch update or Server config).
Below thread might help you. Not sure if you have already checked this
A Protocal Message was rejected because it was too big

How to open pdf files on computer while getting error message?

I can not open pdfs on my computer that I was priorly able to open. This includes files I have scanned in, email attachments, and files I have converted to pdfs. I keep getting an error message in Adobe saying that it is not a supported file type or the the file has been damaged. Please help!

What is your operating system? Reader version?
Can you open such a PDF in a text editor, then copy and paste the first few lines here in the forum?

Just got a new Samsung laptop. Windows 7, . Downloaded and installed Itunes 10.6.3. Now every time i try to open Itunes, I get BSOD and a Veido Scheduler error message. Anyone else heard of this problem ?

Running Windows 7 on a new Samsung Series 7 laptop. Downloaded latest Itunes 64 bit and installed. Now, when i try to run Itunes, I get BSOD and a video scheduler error message

Running Windows 7 on a new Samsung Series 7 laptop. Downloaded latest Itunes 64 bit and installed. Now, when i try to run Itunes, I get BSOD and a video scheduler error message

Facing problem while capturing error messages in ME51N

Hi Experts,
In ME51N transaction, we have included custom fields and tried to capture Error messages by building ex_message.
Below is the code that we used:
         loop at tb_error into wa_error.
            wa_message-type   = WA_ERROR-TYPE.
            wa_message-id     = c_zpr.
            wa_message-number = '007'.
             wa_message-message    = wa_error-message.
          wa_message-message_v1 = WA_ERROR-MESSAGE.
            wa_message-message_v2 = wa_eban1-bnfpo.
            APPEND WA_MESSAGE TO EX_MESSAGES.
            CLEAR WA_ERROR.
          endloop.
In my message class we have not hardcoded the messages because we need to capture dynamic messages(In message class it is 007: & & ). For that we have passed message text in wa_message-message.
But when Check button is selected, we are not the desired error message.
But if we pass the same message in Message_v1, we are getting the error message but it is getting truncated as the size is small when compared to Message field.
Waiting for your response.
Thanks & Regards,
Amarnath

Looks like configuration prob.
Have you tried jms examples of weblogic ? you may need to re-configure your server setup, to create example server.

Prob. while using error message in OOPS ALV

Friends,
I have developed an OOPS ALV to display the records with cost field as editable. And the cost should not accept decimals values, if the user enter the same (12.56) and click the save button (user-defined) then need to populate the error message. I am populating the error message, then the user change the value (12) and click the save, then in the ALV screen the chanegd value 12 is automatically back to prv. one 12.56 and the same error messgae is displaying.
If i change the message type from Error to Info, then its working fine... but the client wants only error message. So anybody came across the same scenario? if yes.. pls share the solution..
Ganesh C

Hi,
In this case, after the error message issued though the value is corrected , corrected data is not transferred to progarm.
Program still works with old data. Check how you are issuing message and how you refereshing the table after user inputs.
you can check program BCALV_EDIT_03 for vlidating fileds.
I believe you can simply refer a data element which does not accepts decimal values.
Regards,
Ravi.

Froze computer while updating. error message said to reload disk. what do i do

when opening firefox it said "updating . . ." then computer froze. After rebooting the computer I tried to open it again and got an error message stating that it is not a valid windows image and check against disk. Is there a way to download the program so it can be reloaded?
Error message: Bad Image The application or Dll F:\program files\MozillaFirefox\xul.dll is not a valid windows image. Please check this against your installation diskette

* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Web composer option not displaying while Customizing Error Messages of Portal applications

Hi
I am trying to customize the error messages through web composer in sap portal but when i Choose System Administration → System Configuration → Knowledge Management → Content Management Web composer option is not shown . I am using netwearver 7.0
please guide me I searched google but couln't find any satisfactory answer.
Thanks

Hi Raima,
From your description I assume you are attempting to implement the steps outlined in the following documentation, is this correct -
Modifying Error Pages - Carrying Out the Initial Configuration - SAP Library
If you are navigating to the KM configuration through the steps you outlined and you do not see WPC Composer listed under 'Content Management' I would suspect that it is not deployed on your system (at least not successfully). It is not included as part of the default stack in EP 7.0 and must be deployed separately. If you do intent to deploy this component, you should also note that the SP level of the KMC-WPC SCA should match the SP level of the other KM and EP components.

While upgrading error message says Network connection was lost

After Itunes downloads the newest upgrade for my Iphone 4, an error message comes up saying that the network connection was lost or had timed out. Thus, not letting me upgrade my Iphone 4 or even keeping the downloaded upgrade. Any Suggestions?

This is a common issue which has been posted and answered literally hundreds of times.
Disable any Anti-Virus or Firewall software on the computer.

Status of a schedule - error message on failure.

Hello All,
when querying for status, after scheduling a document, using the schedule Id - the service returns Completed/Failed status. In case of a failure, it does not give us any detailed description of the failure. This would mean that we have to go to lauch pad in order to look at the reason for failure.
I'm using the http://localhost:6405/biprws/raylight/v1/documents/12345/schedules/34343 to get the status for schedule Id 34343 and document Id 12345.
Is there any othere service that can give more information on failures?
Thanks,
Pavan

hello,
The information you are looking for will be available starting 4.1 SP5 ;-)
For example:
[GET] raylight/v1/documents/6513/schedules/9046
Accept: application/xml
Content-Type: application/xml
HTTP Response Code: 200
Response Time: 274 ms
Response :
<?xml version="1.0" encoding="UTF-8"?>
<schedule>
     <id>9046</id>
     <name>ftp_withSpecificName_withoutExtension_NEED_TO_CONFIGURE_CMC</name>
     <format type="webi"/>
     <status id="3">Failed</status>
     <error>
          <error_code>FWB 00031</error_code>
          <message>Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)</message>
     </error>
     <destination>
          <ftp>
               <port>0</port>
               <directory>/tmp/d930649f-7f8d-4ca7-a462-dece662783ed</directory>
          </ftp>
     </destination>
     <once retriesAllowed="0" retryIntervalInSeconds="1800">
          <startdate>2014-09-04T10:21:20.533+02:00</startdate>
          <enddate>2024-09-04T11:21:20.488+02:00</enddate>
     </once>
     <serverGroup id="0" required="false"/>
</schedule>
Regards,
eric

PS CS2 won't open due to error message regarding RAM...

I've been running Photoshop CS2 since it came out and never had any real problems. Then the other night I loaded approx 20 custom shape files that had about 10 shapes each from ActionFx. I played with them for a while and everything was working fine. Then I shut my computer down that night. The next morning I tried to open Photoshop and got the following message "could not complete your request because there is not enough memory (RAM).
I've tried everything I can think of to fix this so I'm pretty desperate for help. Finally, I resorted to uninstalling just the Photoshop component of CS2. Then I defragged and reinstalled. When that didn't work I uninstalled all of CS2 including my preferences. Defragged again and then reinstalled. All of the other components open and work (Illustrator, GoLive, InDesign, etc.) but Photoshop is still a no go
Something I found really strange is that while the error message is up on the screen I can still see all my layer styles and actions (even though I've uninstalled everything twice now). Of course, as soon as I click ok on the error message everything closes and Windows says "Adobe Photoshop CS2 has stopped working. A problem caused the program to stop working correctly. Windows will close the problem and notify you if a solution is available." Needless to say no solution is ever offered.
Here's my system:
Dell Laptop running Windows Vista Ultimate
Memory (RAM): 4 GB
Hard Drives:
C (1 actual hard drive): 149 GB     Free: 103 GB
D & E (1 hard drive partitioned):
          D: 135 GB      Free: 40.6 GB
          E: 13.2 GB     Free: 12.6 GB
System type: 32-bit Operating System
Video Card: NVIDIA GeForce 8600M GT
Sorry for the long post. Any help will be deeply appreciated!!!

Thank you for replying John.
1. I realize not on Vista at the beginning. I'm sorry, I thought this was obvious. Since the problem I'm having is a recent issue, I only thought listing my current system would be important (I've had this system since 2007).
2. Tried using the Alt, Control, and Shift method but nothing happened. Went to where the FAQ said the preferences file would be and there isn't a preferences file there. Did a search for it on my whole system (just to be sure) and found nothing. Having done all of that I'm assuming the file has been deleted... If there is anywhere else I should look I would really appreciate a heads up. I am at a complete loss as to what to do next besides upgrade (which I can't afford) so that I can work.
I am not a computer person by any means. Everything I have learned regarding computers has been through a few classes and lots and lots of reading books on my own. I was starting to feel pretty decent about myself & computers (I guess that'll teach me).
As I stated before, this whole issue started after installing several shapes. I've gone to Program Files/Adobe/Adobe Photoshop CS2/Presets to try and delete the shapes but there is nothing there but the orig. Adobe presets. The same goes for the rest of the preset files. None of the Layer Styles, Actions, etc. show up. Is there anywhere else I should look?
Thank you again John for replying earlier.
I can't complete any of my work until this issue is resolved so again, any help will be greatly appreciated!!!
I don't understand why the spaces between the paragraphs keeps going away...sorry if it's hard to read.

Why do I get an error message when trying to sync my ipads with my imac

We have two ipads - version 2 I think - the last ones with the old style plug. Both are running IOS 7.1.1 Over the last week, every time I try to sync either ipad with my imac (27" - about 18 months old) which is running OSX 10.9.2 I get the following error message. "The Ipad cannot be synced. An unknown error has occurred (1723)" In every case it takes a while for the error message to appear - the sync gives every impression of rolling along just fine through the various steps - when it reaches step 5 of 6 (syncing photos) it seems to hang up, then after a while the error message shows up.
Interestingly, there are no photos on the ipad, so nothing to sync to the imac, but I discovered all of this when I tried to sync some photos in the other direction, from iphoto to one of the ipads. All I got was the pin wheel of death. I am running the most current version of iphoto too.
Any suggestions on how to fix this would be gratefully accepted.

Can you create a test Project in PrE 9 and does that work. If so, close that Project and then Open it again in PrE 9.
It could be as simple as your PrE 8 Projects just not Opening in PrE 9. There is often forward compatibility, but not always. It is usually best to finish Projects in the version, in which they were started.
Good luck,
Hunt

The way I deal with error message 1417, 1418 and 1428

Firstly, sorry for my poor English, but I would like to share with you my experience, and hope that it may helps you.
Since the release and update of iTunes 7, I have not faced any problem, but I heard a lot of articles from this forum about the errors 1417, 1418, 1428 and 50 etc. I could not make any suggestion and find a solution about it, all I could do is to copy some threads from some successful cases mentioned on this forum.
Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
1. A window based PC
2. A Mac computer
3. An USB iPod cable
4. A Firewire iPod cable
5. An iPod AC charger
As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
How to reset iPod
http://docs.info.apple.com/article.html?artnum=61705
The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
I changed my mind, and put the iPod into disk mode
Putting iPod into disk mode
http://docs.info.apple.com/article.html?artnum=93651
Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
From the above experience, I would like to share it with the user the following:-
1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
2. Try to connect the iPod with a computer, switching between USB and Firewire
3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
I hope the following works in your case as I did.

a pop up error message says itunes couldnt be configured
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Error message when updating ''aray''

I just bought Pirates of the caribean from itunes(latest version) and it downloading perfectly fine to itunes. when i connected my ipod, it said to update the array, i clicked ok and after a while an error message popped up and said
The iPod ''aray'' could not be updated. An unknown error occured(1417)
thats what it says word for word, and now the movie wont get onto iPod, so if someone could help ill gratefully appreciate it.

The iPod ''aray'' could not be updated. An unknown error occured(1417)
some folks have been having some success getting past the 1417s using eboncairn's technique. see:
eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

I am the administrator for my computer, however I have tried several times to install itunes but keep getting an error message.

Apple gives an error signal saying that I need to be an adminstrator to make changes to all the users...there is only one adminstrator account and one guest account.

It reads that I don't have enough adminstrative privileges for every account to download the program
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

While scheduling Error message

Similar Messages

Maybe you are looking for