Who does chase pull for credit limit increase for the freedom card

Trying to increase my Freedom limit I've had the card since April used it heavily payed it off almost in full since then usually after every major purchase I'm wondering if they pull like strictly ex or eq 

CAPTOOL wrote:
Yes-Its-Me wrote:
bigalkescott514 wrote:
Trying to increase my Freedom limit I've had the card since April used it heavily payed it off almost in full since then usually after every major purchase I'm wondering if they pull like strictly ex or eq Whatever they pulled for your initial application is what they will pull for the CLI..  It all depends on what bureau is pulled for your region.Well, that sucks. They doubled pulled me, EQ and EX. Both times I applied.For CLI, they will only pull one.  Chase will pull EX for most people and during initial application, if they are unsure of the credit profile  they pull another bureau.  Another thing they do also is, if you do the pre-equal on their site you will end up with a double pull if you proceed to apply after seeing it on their site...

Similar Messages

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • What kind of credit card usage led to a credit limit increase for you?

     What type of spending behavior led to your credit limit increases?  (Ie zero balance, high usage with early payments, 9%, 30%, ect).   Were they notable increases?   What time frame did the increases occur in?

    As others have noted, there is no set formula, it depends on the lender (and perhaps involves some voodoo or superstition) I got an AMEX Delta Gold card in June 2013, with a $2k limit, and put $4,500 through the first 11 months. Always letting the balance report on the statement, always PIF close to the payment due date. Then purposefully maxed it out twice, reaching $1,800 in early June 2014, then up to $1,300 again in mid-June when they gave my an auto CLI to $3k. My BofA AMEX card, back in the day, had been auto CLI up to $28,800 in April 2008, so I used $21,800 of it. Then they started CLD:Jan 2009, $21,700 (these are all CL, not balances), though the balances were only a few hundred under each step down in CL, the true Balance Chasing scenario)Apr 2009, $20,500Sept 2010, $17,300May 2011, $16,000Jan 2013, $12,700Then in August 2014, I got a 0% offer from US Bank, so I cleared off all the remaining $12k from this BofA AMEX, and in October 2014 moved a total of $10,700 back onto this card on a new 0% 18+ month offer. Proceeded to make some large payments on that. In Feb 2015, got a $3k CLI on this BofA AMEX, from $12,700 to $15,700. Needless to say, it was a good day

  • Product Upgrade & Credit Limit Increase with Capital One

    Upgraded my Platinum Master Cards, I have two, to a QuickSiver Rewards an requested a credit limit increase online only received 500.00 so I sent an email to the Executive Office.  I waited two days received no responce so I called today this is what happened.  Spoke to a gentleman who said he would be my personal credit specialist today I told him that I had upgraded the cards for the rewards and the Visa signiture benefits and requested to increase the limits to 5,000.00 on each.  He told me that I had just been given a credit limit increase and he could do nothing for me.  After getting no were he offered to let me speak to his suppervisor.  Spoke to the suppervisor and ended the call with the same results, she will have someone else call me within 10 days.  My question is this the norm has this happened to others.  The number I called was one I found here in the forum.  I have had both cards for over 6 years and have always paid them on time just never used them much because of the low limits.  Any information would be greatly appreciated.  

    tel12 wrote:
    Upgraded my Platinum Master Cards, I have two, to a QuickSiver Rewards an requested a credit limit increase online only received 500.00 so I sent an email to the Executive Office.  I waited two days received no responce so I called today this is what happened.  Spoke to a gentleman who said he would be my personal credit specialist today I told him that I had upgraded the cards for the rewards and the Visa signiture benefits and requested to increase the limits to 5,000.00 on each.  He told me that I had just been given a credit limit increase and he could do nothing for me.  After getting no were he offered to let me speak to his suppervisor.  Spoke to the suppervisor and ended the call with the same results, she will have someone else call me within 10 days.  My question is this the norm has this happened to others.  The number I called was one I found here in the forum.  I have had both cards for over 6 years and have always paid them on time just never used them much because of the low limits.  Any information would be greatly appreciated.  The number you got on this forum used to be their Executive Office, but now staffed by regular customer service people, who are no different than your chat or phone customer service. Your hope is to get official response from the email you sent to the EO. You need to wait 1-2 weeks, not days. They have to assist a large number of customers and they are not as big a team as the customer service people. My Cap One card started as a Plat with $500 limit a little more than 2 years ago and now it is at $8k and upgraded to a QuickSilver. Also as others mentioned, you can use the new "Combine cards" tool to combine your multiple small limit cards to a larger, more useful limit.

  • USAA World Mastercard approved $16k, NFCU credit limit increase doubled to $20k!

    It's about time ladies and gentlemen!
    12.99% for NFCU platinum12.90% for USAA World Mastercard Rewards.
    Full USAA member (I think?)  I have Auto, Home, Personal Property Insurance with them.  Also Checking, Savings, Stock account.  Former enlisted, medically retired. I had a Classic card with USAA since 2011.  I didn't know at the time that I couldn't increase the $1k credit limit with that card.  They were charging me a shocking 22.9% apr, but I luckily never carried a balance after the first 6 months of using it.  Usually would charge most of my stuff on it and pay in full.  The NFCU started me off at a $10k credit limit a few years ago and I was really happy with the 12.99% and the first real bigger card.  Everyone else was only offering me $1k and I was very happy with the larger limit.  I do believe that this was also high because I had opened a secured credit card for $10k, yes I had cash at the time but no credit.  I ended up closing that account and getting my money out when the NFCU was accepted.  I truly believe that the lenders look at other credit limits to also base off what they offer you as a credit limit.  Lately though I was getting recked by the high utilization on my NFCU 10k limit as I had just gotten married and luckily we recieved plenty of cash and gifts to cover everything.
    So anyways after hanging up with USAA after learning about my classic card with them and not being able to increase credit limit nor change APR, I applied for a USAA World Rewards online and instant approval for $16k @12.9%!  This is going to be my main earn some points and pay in full card.  I just wanted more overhead so that I could spend without worrying about my utilization ratios.  And I've been with USAA for 6 years now. About a few hours after I got the itch to bump up my $10k limit on NFCU, because I had brought the high limit to about $10,125 at one point.  And after lurking for years on this site and reading up on asking for the max limit without review, I did the $25k credit limit increase online.  They countered with $20k!  I accepted!  I just sent a message to see if they could reduce my interest rate and we shall see within the next few days.
    Never had a late payment on my report, but was a bad boy at 18-19 years old.  About 3 years ago everything bad off my credit fell off from the 7 year rule.  I had some late payments and such at 18 years old.  I ended up disputing them on annual credit report to verify the numbers are correct and they ended up removing the bad ones luckily!
    I want to say my score is in the mid 720s.  But my vantage score that shows on the credit cards is 699, probably due to that high 9k balance on the Navy Fed that hasn't reflected on the reports yet. I do shop at Costco a lot but never had their AMEX.  But was thinking of applying for the Visa rate advantage with USAA to use at Costco.  My mom added me as an authorized user on her AMEX for costco so she could get points.  But I called AMEX and canceled my authorized user account with them a few months back.  I disputed online that I never signed anything and was added on by my mother.  Transunion removed the AMEX and another card I was authorized on (barclays) but experian just reported them as closed.  Wondering also if this hurt my average age of accounts.  My credit sesame shows about 3 years and 6 months for my average age. So currently have my $16k limit with USAA World Mastercard$20k limit with NFCU PlatinumOnly two credit cards as I canceled my $1k limit classic crap card.  Have one car loan open now and one mortgage.  Had many car loans, about 2 car refi's, even had 3 car loans open at one time during my high 680ish scores.  Lots of utilization I guess, they say they hate it, but they secretely love a good comeback story.

    Thanks everyone!  Wanted to update that Navy Fed denied my APR decrease and they said I could do it once a year.  Eh, 12.99 isn't too bad. Also wanted to add that I got my first VA loan when I was around 620ish and I brought it up from 580 a few months before.

  • How long does it take for the credit on the iphone 5 itunes to start declining after a purchase

    how long does it take for the credit on the iphone 5 itunes to start declining after a purchase? I used a $15 gift card, it was redeemed, and it showed up in my itunes account on my phone but after buying songs, the credit did not decline from 15, even after I restarted itunes on my phone.

    Nt sure on O2, but that seems to be a long time, you need to call your carrier and make sure they dont need to activate it. I believe they do.

  • Does a teacher and student who are homeschooling qualify for the student and teacher pricing?

    Trying to determine if a student and teacher who are homeschooling qualify for the student and teacher rate.

    I believe the school/institution has to be one approved by Adobe.  See the following page for some basic criteria:
    Student software discounts, student eligibility | Adobe
    It does address homeschooling - Homeschool — defined by state homeschooling regulations

  • What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?

    I have noticed damage caused by the bumper.
    It is NOT foreign object but caused by the hard plastic on the inside of the bumper
    (plese do not come out with rubbish like steel is harder than plastic) I am not stupid and I know that the damage matches the pattern of the bumper skeleton.
    What I want to know is when are Apple going to deal with this and replace my phone?
    I dare not go to the so called Genius bar in Milton Keynes as they have adopted a Dixons style "fob off" attitude and I will become rather angry with them.

    Re: What are Apple doing to compensate for the damage caused by the iPhone 4 bumper? 
    15-Jun-2011 15:15 (in response to sfrommilton keynes)
    o Steel is harder than plastic, so the bumper has not caused the damage.
      - You call it rubbish
      - The world calls it physics
    You are totally wrong.  Please go back to School.
    o You can deny physics
      - but that will not change reality.
    You can go to School but that wont change reality.
    o Your description of your Genius bar is incomprehensible
      - I recommend you go to the Genius bar leaving the chip on your shoulder at home and tactfully explain what you think is your issue.
    I recomend you find a day job ans stop TROLLING peoples threads.
      - I've never had them fail me or be the least bit confrontational.
      - But if you act like a jerk then I couldn't predict what would happen
    Yeah because you were there.  Are you having some kind of relationship with the company?  I think you sleep with an Apple under your pillow.
    Finally I am a consumer who has paid for a product that is not living up to expectations.  The plastic skelton is hard and abrasive (I know what that means as I went to School) Abrasion's are marking the product. 
    This is not the only time this has been reported and as such I have no issue with particles entering the bumber.  This has happened from the start (when I used Apples stupid bumber case)
    Please don't patronise or TROLL others threads.
    <Edited by Host>

  • OTL Error - Hrs - Element link does not exist for the duration of the entry

    Hi,
    We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
    Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
    However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
    Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
    I have re-run the security list generation (we are using static list).
    The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
    The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
    We are using 11.5.10.2
    Thankss

    Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
    If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

  • How long does it take for the email notification of a gift App to be sent to the recipient?

    How long does it take for the email notification of a gift App to be sent to the recipient?

    Some people had to wait 2 months.
    It depends on many things.
    When the debtor updates the CRAs. Sometimes they do it on a case to case basis and sometimes in bulk by an accounting dept.
    When the new update from the CRA is recognized by the credit monitoring company. Depending on the company and what triggers new alerts.

  • I am updating my iPhone4s with the most recent OS7.3software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

    i am updating my iPhone4s with the most recent OS software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

    How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

    Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
    Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • Node id does not exist for the current application server id  on forms

    Hi,
    We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
    We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
    while opening oracle forms we are getting" Node id does not exist for the current application server id "
    on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
    Fnd_nodes... which matches ( there is no mismatch of application server id) .
    We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
    Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
    Can some one guide as to which file has this message "Node id does not exist for the current application server id "
    and what could be the reason for this.
    Help is appreciated.
    Regards,
    Milan

    I already tried the mentioned metalink note id but it did not work.What did you try exactly?
    Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
    i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
    Thanks,
    Hussein

  • Error :Extract Structure does not exist for the table YFSP03A .

    Hi Could you please help me to solve the above mentioned problem?
    I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
    Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
                          So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01,  FAGLBW02.

    Hi Bharath,
    Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
    After activation try to retransport.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Maybe you are looking for

  • Export in multiple excel sheets

    Hi, I am using crystal XI and need to export in multiple excel sheets from crystal. How can I do that, please help me. Thanks, Sagarika.

  • HELP! CS2 hyperlink index to book pages for PDF

    Hi there, would really appreciate any help with this. We need to make an interactive PDF with a fully searchable index using InDesign CS2 (windows platform on PC). Currently we place text into CS2 InD doc templates, format it, then add all docs into

  • Which fan is best to use with hp dv6-6198sp?

    The laptop is orginally a dv6-6153ea but i upgraded the motherboard and cpu to that of a dv6-6198sp, So it now has a ati 6770 and core i7 2670qm which i need to keep cool Temps are reaching 95 on load which i feel isn't that great! I have two fans i

  • What do you use to write Java programs?

    Hi. Do you mind if I ask you what do you use to write your programs in Java? I am a student and we are using NetBeans IDE 3.6. I know it is a bit old but the tutor says we must stick to that one. What is best for writing Java programs? Thanks.

  • Launchpad report issue

    Hi, Im trying to implement ESS-MSS(1.0 SP 8) on EP 7 SP 11. There is an iView know as Launchpad under MSS -> Reports. On opening the page Im getting the following error: com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerExce