Who has upgraded to 3.1.1 trouble free

I have been hesitant to upgrade due to all of the negative comments about 3.0.
I was wondering if people have actually had no problems with the upgrade.
How are things going? Is it worth the time and trouble?

The only problem that I have noticed is that videos take much longer to load on you tube, so long that I haven't been using the you tube app because it's virtually impossible to wait to load. (8-10 mins loading time for a 2 minute video) iPod touch 2G V3.1.1.

Similar Messages

? for anyone who has upgraded to 1.1.3

How long did it take for the update to actually happen? My phone has been sitting for about an hour now with the apple logo and the little circle thing below it.
I'm on a broadband connection so speed shouldn't be an issue and the green bar on iTunes is all the way done but nothing has happened...
Just curious if this is normal?

thank you Cowboy! I was about to unplug...
I'll give it another hour and see what happens, I don't think this is good though.

Who has loaded iOS 4.3 on the 3Gs

Who has upgrade to iOS 4.3? Who is your phone? Is is sluggish or quicker? I'm going to wait and see what everyone else has to say before I upgrade. When I had the iphone 3G I did the mistake up grading to iOS4 and it made my phone at the time sluggish. Now that I have the 3Gs I'm going to wait a see.

That would be the plan, since he still has a few months left on his warranty. The unfortunate thing though, is like me, he uses his phone for work, and absolutely cannot go without it. So to have it sent of to Apple for them to look at for the next 4-6 weeks is not possible. Unless Apple is willing to give him a loaner phone, which they said they couldn't. Damned if you do, damned if you don't.
Ever since the 4.0 update fiasco, I've just been following the threads here regarding all the updates. Because there were enough complaints and issues with them, I never bothered to update from 4.0. That is until my last 3GS, Apple said they'd upgrade me to the iP4. But before I said yes, I told them I would update my 3GS (from scratch) to 4.1 to see if it fixed anything. Like the previous 2, it didn't help. Apple sent me an iP4 with 4.1 installed. Except for the intermittent wifi issues, all other issues I had with my previous iPhones are gone. The wifi issue is, even at full bars, I get the message "you need to be connected to the internet" every so often. Or with full bars, it would switch to 3G then back, then back to 3G again. There are also times when in wifi settings my network would be checked off (indicating you are connected to a wireless network), but it's still says 3G at the top. I would have to switch wifi on and off several times before it finally stayed on wifi. But that's a small compared my previous fast battery drain doing nothing, rebooting randomly, and emails that loaded automatically even though I didn't launch Mail and Push Email is set to off. Except for the jailbreaking workarounds, I did pretty much all the suggestions in these boards with no luck. Hence, why I'm very apprehensive about updating to 4.3 at the moment. Still waiting on more people chiming in.
I'm curious to see how many people who weren't having issues under 4.2.1, haven't run into any issues when updating to 4.3. Or those that were having issues under 4.2.1, no longer have them under 4.3. Right now, I'm still seeing posts of people having reboot and battery issues in previous iOS's, still having them under 4.3. Even after a fresh install.

I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?

I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?

Are you trying to get an upgrade before you're actually eligible? If that is the case, it doesn't matter if you've been a customer for 6 years or 6 days...if you're not eligible then you're not eligible. Some of your possible options are to pay full retail, do an early edge up (if you are eligible for that option), or buying a phone from some other source to use.
If your situation is something different then it might help to share that. The options may still be the same but it helps to know what exactly the issue is.

Hi, I have an iphone 4 with my itunes library on a Windows XP computer. My spouse who has now passed away had an itouch and an Itunes Library on an Imac...so here is the problem I got a new iphone 6 and wanted to update my itunes library from my win

Hi, I have an iphone 4 with my itunes library on a Windows XP computer. My spouse (who has now passed away) had an itouch with an itunes library on an IMac. here is the problem, I bought an new iphone 6 and wanted to sync with my windows xp library and of course my itunes version is out of date and I need to update it...well I try and update the version and it will not update the Itunes library and when I researched it I would have to upgrade from XP to Windows 7...r they kidding me...first of all my computer is old and a pain in the *** but I have my itunes library on it. Sp to get my phone working I sync'd it on the IMac and my spouses Itunes library has been sync'd to my iphone and I don't know how to get my library on it...After thinking about it I want to combine the libraries after all there are some purchases on each one.
I have done some research and you have to buy a 3rd party piece of software...this is not the way I want to go...I do not think i should have to buy one and also when I do a goole search there are a ton of them out there and I am sorry i do not trust the comments as some of them do identify that they will get a kick back.
Can someone help, i should be able to export my itunes library from my iphone 4 to the itunes library by appending/importing it...it is not rocked science on what I want to do and I cannot find out any process...
Can someone help ?

Create a new user account on the computer that he can log in to.

Is there anyone who has used Freescale's SimpleSUB.dll and DEMOJM board?

Hello,
I am trying to connect Frescale DEMOJM board over USB connection. I am adding SimpleUSB.dll to my visual instrument thorough .NET constructor node and giving an mscorlib class GUID to the GUID property, than calling OpenConnection method from an invoke node referencing the SimpleUSB reference. But there is no valid connection to the device as DeviceConnected parameter return "False".
I am using LabVIEW 8.6 trial, .NET Framework 3.5. So they are up to date I guess. Is there a limitation of these for using .NET dll? And also I can use the dll in Visual C# successfully.
At first there was another problem using the .NET constructor node in LabVIEW because of Vista OS. The vi was blocking when i added the node to the vi. I changed the "language & regional settings" to English(USA). The problem seemed to be solved. Can Vista's bug be still a problem?
Is there anyone who has used Freescale's SimpleUSB.dll and DEMOJM board with LabVIEW?
I will be thankfull for your helps.
Emre

Hello Anna,
Here is one of my poor vi trials. I have also tried putting some conditionals in some other files but it didn't helped.
http://rapidshare.com/files/176194859/EXTDLL1.rar.html
Here is a link for the Freescale's DEMOJM board. It shows how to make a GUI for the board using SimpleUSB.dll & C#. You can also download the dll from that web page and there is helpfull documentation for the dll.
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=USBJM_TRAINING&nodeId=016246fNrgVJ4Cx...
I am trying to make the same thing with Labview instead of C#. But I am not familiar with the SW issues so am in trouble.
Thanks,
Emre

HT201272 wait just to be sure i am not the only one who has the "term and conditions" problem

wait just to be sure i am not the only one who has the "term and conditions" problem

Go to Crucial.com and use one of their two methods to determine what upgrades are available for your Mac:
I would purchase the modules from Crucial as they are very reliable and wiill work with you if you have problems.
OT

Question for those who've upgraded re: QuickTime interaction

For some of you who've upgraded (and those of you who haven't), I have a video that used to loop when using the older version of QuickTime, but doesn't loop for me using the newest version. I know some things changed in QuickTime for security, but I was unaware that it would affect this action.
I apologize in advance for the addictive nature of the song
http://web.mac.com/makentosh/iWeb/zample/crab.html
This video uses eZedia QTI to embed the "looping" in the streamed movie. Using this setup, a user would not have to edit the .js file of the site as the Autoplay="false" didn't apply in this case. What I wonder now is if it still works for users with the old un-upgraded QuickTime but doesn't work for the newer people. Just trying to determine if this is a true change for all users or if there's something particular about my setup.

It's caused by the missing QuickTime controller.
You'll notice that Loop is grayed out in your current file during playback and even adjusting the Movie Properties to add a controller version 7 does not allow your file to loop.
But 6.5.2 does work to allow "looping" if you add a controller. Of course I can't interact with your reference movie but the menu items for loop did activate.
Version 7.1.5 has some "hidden" features (I suspect related to TV) that actually use a different controller feature for chapter tracks and move them out of the controller and into a Menu item. Maybe sub titles?
Maybe it's time for your crab song to only play once?
Others have complained that 7.1.3 no longer allows Loop (from the Menu) to be saved with the file. I haven't fully tested that one.

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Upgrade to CS4 Prod. Premium - is it trouble free

There is probably a forum for CS4 Production Premium but I wanted to get the opinions of a few photoshop users who may have made this upgrade.
I'm running Windows XP pro on P4 3.2gh processors with 2 gb Ram.
I've been using Production studio of CS2 and later upgraded some tools to CS3 like photoshop and Illustrator.
I remember having a fair bit of trouble installing Production Studio... A lot of people did when it was new. A lot of dinking around was required as I recall.
I'm now wanting to upgrade to CS4 Production Premium and wondered if people could share there experiences with that sort of upgrade.
Is the cs4 package a pain in the butt to install... Did it install smoothly.
Please let me know what to expect...

curt y wrote:
If you can find any software that is trouble free I would like to buy stock in that company. But seriously, CS4 makes major demands on the video card and you would be wise to read threads on this forum to see how that would affect you with your current computer hardware/csoftware.
Yikes... I should have known someone would feel compelled to make that quip.
Must have been clear that my question was more... `was it a pain in the butt to install'.
Can you be a little more specific about what you are hinting at? Hard to know how to be wise with no clue to go on.
I have an Nvidia GeForce FX 5700LE (256MB) card
I guess another thing to ask is if its worth upgrading to CS4. Is there lots of new functionality?
Just reading the `whats new' hype isn't like hearing from experienced users what they find worth using.
I remember back when I upgraded to Production Studio, one of the big things I was after was the
`Dynamic link' . After the big buildup of how great it would be... I was pretty disappointed and never did find it very usefull at all. in fact it seemed to make the machine more unstable when calling up both AE and Premiere at the same time. I quit using altogether after a few crashes. And even when I didn't crash it just wasn't much different or better than the old way.
This upgrade will cost me about $600 for the upgrade I'm qualified for.
But back to the clues about what to look for... can you suggest some likely search strings to use?

RE: How to monitor who has what service objectconnection?

We ran into this problem, specifically because we are using a dbsession
connection pattern and the dba's did not like loosing control over
connections. We have 8 subsystem, each with a dedicated connection that
is shared across multiple users. We also have a security pattern in
place that is token based. Since we have to pass a security token
through service objects we can track this information using a
"connection array" on the service object and a system agent to poll the
contents of the array. When a sql statement is invoked on a
persistence object we add the user to the array on the persistence
manager (SO). When the sql is complete we remove the user from the
array. Since the PO has a system agent we can ask the system agent at
anytime, who has an open connection/session with the PO. Since system
agents plug into econsole, the dba can go look any time.
Any questions, please contact
Chris [email protected] or
Gary [email protected]
MCI Systemhouse
From: ADRIAN PEGGY LYNN
To: [email protected]
Subject: How to monitor who has what service object connection?
Date: Tuesday, September 24, 1996 9:12AM
Here at Eli Lilly & Co., we have a customer that would like to know if
anyone out there has successfully
devised a method to be able to tell what user has what service object
connection. Basically, if a customer
calls the system administrator with a problem with the application, the
system administrator would like to
be able to kill certain processes. Right now, the database connections
running on the server all look the same.
Some ideas were generated internally, one referring to setting up agents
but we'd like to see if anyone
has had success in doing this already that we could use as a contact.
Thanks,
Peggy Adrian
Eli Lilly & Co.
[email protected]

Hello Peggy,
I suggest that you make contact with Paolo Sidoli at DS Data (Italy). They
have written a very nice package called DORE that includes trouble shooting
utilities, that allow you to monitor what a remote user is doing (you can
actually see their screen!).
You can contact Paolo at [email protected]
Best regards,
Richard

I recently installed Mavericks and now I can't video chat with sister who has ichat, is there a fix?

Is ichat on an older machine compatible with Mavericks Messages video chatting? Is there something I can do to video chat with someone who has ichat on an older machine? They aren't going to upgrade so am I stuck with Skype? We really liked ichat.

Yes, I can video chat with someone on Skype. I only ichat with my younger sister and she doesn't ichat with anyone else. I don't have anyone else to try out the video chatting with in Messages. She's not tech savy and doesn't feel comfortable doing anything to her program. A friend may try to get her up and running on Skype, we just liked chatting with the Mac programs.

Iphone 5C will not sent iMessage to another Iphone user who has not installed ios7

I have found that if I am trying to send an imessage to another Iphone user who has not upgraded to ios7, the messages will appear in my history as "sending". I deleted that contact history and tried to send another text and it worked as it was sending as a "green message" rather than a "blue message". Is there a way to work around this?

Thanks for the answer. Disabling iMessage does work, but it's a bit clunky to have to do that every time I want to message him. Many of my other contacts have iPhones and I like the iMessage feature.
He's had the same number for years and I only recently have had this issue, he doesn't have iMessage on any device, he only has an iPod nano. I wonder what happened that all of a sudden it has defaulted to iMessage for him.
Any other ideas?

I need feedback from anybody who has the 2011 baseline 15" MacBook Pro

I need anyone who has the new baseline 15" MacBook Pro to give me feedback. Like, is it fast enough, is the resolution ok, is the hard drive fast enough at 5400 rpm or is it slow in transferring data, especially this point, does it require any upgrade, and all that other stuff.

Perform a SMC Reset, it could be causing your battery problems.
https://support.apple.com/kb/HT3964

Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

Hi;
No, there isn't a way for you to see anything about who has saved progress.
Thanks,
Josh

Who has upgraded to 3.1.1 trouble free

Similar Messages

Maybe you are looking for