Whole po value

i want to know where will be whole po value will be updated.
prasad.

There is no way to get the Total PO value directly or atleast I have not come across it so far.
To make it easier for you to get the pricing condition data, you can use Function module ISAUTO_SIC_GET_PRICING_INFO.
Other way is to get the KNUMV field from EKKO for each PO and then pass this knumv to KONV table to get the all the pricing conditions maintained for this PO. KONV shows pricing conditions for both header and line items of the PO. Field KPOSN is used to determine between header and line item conditions.

Similar Messages

Is there any way to copy whole form value to other form ?

is there any good way to copy whole value of one form to other form ?

the form would eitherway will be bounded to te bindings of the VO.. y cant you use the bindings itself to populate the values from one form to another form

Comparing two Date values in ActionScript - possible to compare whole day values?

I need to be able to compare the number of whole days between two dates in ActionScript, is this possible?
I'd like to test if one date is 7 days or less after today, and if so is it one day or less (if it's before today this also counts).
The workaround I have in place is using the .time part of the date field:
// Get the diffence between the current date and the due date
var dateDiff:Date = new Date();
dateDiff.setTime (dueDate.time - currentDate.time);
if (dateDiff.time < ( 1 * 24 * 60 * 60 * 1000 ))
return "Date is within 1 day");
else if (dateDiff.time < ( 7 * 24 * 60 * 60 * 1000 ))
return "Date is within 7 days");
As I say - this is only a workaround, I'd like a permanent solution to allow me to check the number of whole days between 2 dates. Is this possible?
Thanks

I think this is the solution
var daysDifference:Number = Math.floor((dueDate.time-currentDate.time)/(1000*60*60*24));
if (daysDifference < 2)
return new ClassFactory(DataGridRedRenderer);
else if (daysDifference < 8)
return new ClassFactory(DataGridOrangeRenderer);
else
return new ClassFactory(DefaultGridItemRenderer);

SCOM Alerting : How to change displayed "Has value" number on email to user

Our end users who receive these alerts want to see only a whole number value for Logical Disk with a counter % Free Space
Presently the alert fires -email is sent and the out put that is displayed for "has a value" displays 12.8447532653809
Users want only the whole number 12 - I will even take 12.84
Where or what can I do to achieve this for the customer
Any help would be greatly appreciated
KevinPA17111

Hi,
Use this custom MP by Kevin Holman
http://www.systemcentercentral.com/pack-catalog/logical-disk-free-space-addendum-mp-for-windows-20032008/
Disabled the current disk monitors in the MPs you are using and use those in this MP
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

Html -- less than a whole pixel

I am trying to align an image height as "17.2" pixel but iphone renders the image height as 17 pixel. Is there any way I could get it to work for less than a whole pixel value. I minimally tried adjusting the border etc..
thanks,

yes,
it is sure a problem
i want to know also.

In Hgrid one row attribute value color

Hi,
My requirement is, i have to show Hgrid one row attribute value in any color.
As per my understand we can show only the whole column values not the particular field in Hgrid by using css style.
Please advise me if it is achievable.
Thanks in advance
Jyostna

If you are looking for a random field coloring (randomly any particular column for a row based on some logic), this should not be possible.
Thanks /Santanu

Compound key values

Hi,
I define ITEM NO as main infoobject and compound key fields as Branch, Location, lotno, and fiscal year. When I select ITEM NO in the report I am getting all key field values.For example sample data: BRAN1/LOC1/LOT1/200604/ITEM01 but I want only ITEM01 as output. What I did I put the Branch, Location, Lot no, fiscal year under Filter still its giving whole key values when I select ITEMNO. Can anybody have any idea?
Thanks in advance
Randy

Hi,
this is the usual behaviour for compunded characteristics.
If you drilldown the coumpounding chars of your ITEM, they will disappear from the display.
One nice way to avoid this behaviour in to add a navigational attr in your char which you'll populate with the same value then the value populating your ITEM.
By doing this you'll be able to see your ITEM value "detached" of its coumpounding characteristics values...
hope this helps...
Olivier.

Bid-values in Bulkfiles

Hi,
I am new to BingAds-API and just now I am testing Bulkfiles.
I wonder, why most Bid-values of our keywords return with 4 fractional digits.
We pay in Euro and there are only two fractional digits.
For example: Our Bid is 0.13 and the Bulkfile-value says 0.1294 or our Bid is 0.07 and the Bulkfile-value says 0.0719
Do I really have to round before comparing with my local Data?
Regards
Jam

Hi,
I have been researching a bit and found out, that in my first example (0.1294 for 0.13) the keyword had at first an cpc of 9cent, that cpc was first increased by 15% up to 0.10cent (0.1035) an later it was again increased by 25% up to 0.13 (0.1294). Similar
at the second example.
It would be interesting to know, if the exact cpc-bid with four fractional digits is used for auction. If not, it would be better to return only whole cent-values as in the UI.
Thanks,
Jam

How to return whole number using round function

hi
can i get sql query using round function how to return whole number value

Hi welcome to the forum. if you want whole number value what does it mean
1. whether you want the whole number greator than or eqaul to that number example for 12.6 you want 12 or 13
see below example
1. SQL> select round(12.5) from dual;
ROUND(12.5)
         13
2. SQL> select round(12.4) from dual;
ROUND(12.4)
         12
3. SQL> select floor(12.5) from dual;
FLOOR(12.5)
         12
4. SQL> select floor(12.4) from dual;
FLOOR(12.4)
         12
floor will always give you a round value which is a integer or whole number less than or equal to but output of rond will differ if the value is greator than 12.5 it will give 13 but if it is less than 12.5 it will give 12, so depending on your requirement you can choose which function to use. similarly if you always want to get the whole number greator than the number you can use ceil as below
SQL> select ceil(12.3) from dual;
CEIL(12.3)
        13
SQL> select ceil(12.8) from dual;
CEIL(12.8)
        13

Transfer partial asset values from completed asset to AUC/other asset

Hi All
Is it possible to transfer partial asset values from completed asset to AUC/other asset.
if yes please let me know how to do that?

I already checked T code ABUMN
But by using this code whole asset value is transferred ; I want to transfer only partial value.
eg. If i postasset value of Rs. 1000 to a machine & capitalise it. But after posting i found that actual asset value is only Rs. 600 and balance is of another asset.
then how can i transfer balance asset value of Rs. 400 to another asset card.

GetNodeValue and SetNodeValue not getting the whole content

Hi!
I've been having some problem with GetNodeValue and setNodeValue and I was wondering if anyone can help me...
for example, Let's say a portion of my XML Document has:
<Buyer>Tommy Jones</Buyer>
<Item> Used Cars </Item>
nodes... and I'm trying to do getNodeValue() on Buyer... and it returns only a portion of the Node Value... "Tommy Jo". I had to make a ChildNodeList and append all the child nodes Values to get the full content "Tommy Jones".
and when I do a setNodeValue(), trying to replace Item, with Value, "New", I would get an output like: "Newd Cars" or even "Newsed Cars"... very inconsistent even though I used same method at different places.
Question 1: Shouldn't getNodeValue() return the whole actual value, rather than making me go through "imaginary" childNodes (that I apparently don't see anywhere) to append the text to get the full value? So I guess my first question is why is this happening?
Question 2:
What can I do besides going through all the Child elements under Buyer and Item to append/remove to get the full content using getNodeValue()and setNodeValue() methods?
Thank you so much for your time and help.

Document document;
document.getElementByTagName("tagName").item(0).getFirstChild().getNodeValue();
returns the text value in a element.
document.getElementByTagName("tagName").item(0).getFirstChild().setNodeValue(String nodeValue);
sets the text value of a element node.

How to read RGB values into Set

Hi,
I have been told that to count the total number of unique colors in an image is by reading each pixel RGB values into a set.
I have checked this and it is true that the set can do this fine if considering only either one channel of the R,G or B (this does not allow me to know the exact number of color exist). However, I am confuse on how to have all three R, G and B values into a set so that the set can consider the whole 3 values of RG and B as a color which can then be differentiated separately.
I think pixelgrabber allow to getPixel RGB values but I am working with JIU getsample method. Perhaps I missed out other methods in JIU which have the same functionality as in pixelGrabber.
I am working on an image analysis so I need to figure out this out first.
I am hoping anyone can help me out with this and I thank you.

as mentioned, pack the rgb values into an integer.
instead of a set, you will get better performance and
memory useage using a sorted, dynamically allocated
int array. With some minor work, you better this
structure by using more than one sorted array and a
cheap rgb mask hashing mechanism. I don't know what
JIU is, but look at the source of java.awt.Color for
details on how to pack/unpack rgb values.Hi,
Thank for your feedback. I have tried to pack the rgb values into an integer. At the moment I just making used of Set (will look into probably ArrayList after I get the rgb values correct). However, I am not sure whether my code is correct (which I doubt) or not. Not sure how the output looks like that. If you could have a look at it and confirm me, I would be very much thanking you.
the code snippet:
public void countColour() {
int r, g, b;
int[] rgb1DArray = new int[h * w];
int[] rgb = new int[4];
Set set = new HashSet();
int alpha = 255;
for (int i = 0, cnt = 0; i < w; i++) {
for (int j = 0; j < h; j++) {
r = intImg.getSample(0, i, j);
g = intImg.getSample(1, i, j);
b = intImg.getSample(2, i, j);
System.out.println(r+ "," g "," +b); // just checking rgb values
//rgb[0] = alpha;
rgb[1] = r;
rgb[2] = g;
rgb[3] = b;
System.out.println(rgb[0]+ "," rgb[1] "," rgb[2] "," +rgb[3]);
rgb1DArray[cnt] = ((rgb[1])<<16)|
((rgb[2]<<8))|(rgb[3]);
System.out.println("rgb["+cnt+"] :" +rgb1DArray[cnt]);
output:
Image file size is 230 x 236
204,221,203
0,204,221,203
rgb[0] :13426123
204,212,191
0,204,212,191
rgb[1] :13423807
180,166,140
0,180,166,140
rgb[2] :11839116
236,209,166
0,236,209,166
rgb[3] :15520166

Inconsistency between Bex and Back end

Hello, I have a query about bex issue. I have few fields in my DSO/Cube which has data showing correctly in the back end but in Bex it shows partial of those values. like if i have something like this:
ZField
000000000000000000008
It shows correct in DSO table but in Bex it only shows the zeros. do you know why and how to get this to show the whole field value?
Thanks.
By the way this is a characteristic and not keyfigure.

Hi Vekant,
If you have not did any speecific thing at query level then value should be shown correctly.
Please try this once and check.
Create new test query on your data target drag and droup your charecteristic.please execute your test query and see if you are able to see the correct value.
try this.
Regards,
Ganesh Bothe

How to calculate a percentage in a Matrix row SSRS

HI All,
I have the following data in a SSRS Matrix. I want the data to reflect as 'B' but I constantly get data reflected as a total.(C)
I need the percentage per row and not the whole total value.
this is my expression =count(Fields!Rejection_Reason.Value)/sum(Fields!ClaimCount.Value, "DataSet1")
A
Dealer
Total Sold
          VW
          Mercrcedez
        Honda
Dealer1
10
2
5
3
Dealer2
20
5
10
5
Dealer3
30
10
5
15
B
Dealer
Total Sold
VW
Mercedez
Honda
Dealer1
10
20.00%
50.00%
30.00%
Dealer2
20
25.00%
50.00%
25.00%
Dealer3
30
33.33%
16.67%
50.00%
C
Dealer
Total Sold
VW
Mercedez
Honda
Dealer1
10
3.33%
8.33%
5.00%
Dealer2
20
8.33%
16.67%
8.33%
Dealer3
30
16.67%
8.33%
25.00%
60
Thank you for your help.

Hi Andrevw23,
Just as michlimes suggested, we should sum the value of ClaimCount field in the Dealer group region, other than the dataset. Because the sum function sum all non-null numeric values in the specified scope. So in your scenario, we can try to use the function
below to achieve your requirement (“Dealer” means the name of Dealer group):
=count(Fields!Rejection_Reason.Value)/sum(Fields!ClaimCount.Value, "Dealer")
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Tax Calculation

I am having an issue with Tax amount calculations.
If the 'TxN' Indicator is checked in the Tax jurisdiction config - which means the Discount amount be deducted from the Invoice amount to determine the Tax base amount for calculation of Tax amount.
Ex: 5% Discount if Paid within 10days, 0%Discount if payment is done after 10Days.
Issue: The Tax amount/liability would be more If we miss the Payment to a vendor with a 5% Discount, whereas the Tax amount would be less if the Vendor payment is done within the Discounted period.
I need to know how the postings occur - Does it automatically recalculate the Tax amount after the payment is done at a later date or What should we do in order to maintain the Tax regulations?
Or
Is there any config./setting that can be done to calculate the amount of Tax only at the time of Vendor payment, instead of calculating the Tax amount when you post the Invoice.

duffymo wrote:
I'd start with an interface and create an implementation that you can swap in or out at will:The evil that is Groovy:
import java.text.NumberFormat
import java.text.ParseException
minAmount = 100
maxAmount = 20000
def roundUp(amount) {
    return Math.ceil(amount * 100) / 100
assert 4.02 == roundUp(4.011)
validInput = false
while (!validInput) {
    amount = System.console().readLine(
        "Enter a whole dollar value between %,d and %,d (inclusive): ",
        minAmount,
        maxAmount)
    try {
        amount = NumberFormat.integerInstance.parse(amount)
        if (amount < minAmount || maxAmount < amount) {
            printf("I'm sorry, '%s' is not in range.\n", amount)
        } else {
            validInput = true
    } catch (ParseException e) {
        printf("I'm sorry, I didn't recognize '%s'.\n", amount)
tax = 0.0;
switch (amount as int) {
    case (100..299):
        tax = roundUp(1.25 + (amount * 0.10))
    case (300..999):
        tax = roundUp(5 + (amount * 0.08))
    case (1000..9999):
        tax = roundUp(25 + (amount * 0.055))
    case (10000..20000):
        tax = roundUp(amount * 0.03)
printf("\nYour tax is: \$ %,.2f\n", tax)~

Whole po value

Similar Messages

Maybe you are looking for