Whoo hoo about time... Auto Filter now has HP and BP modes

Just thought i'd share this cause i havent looked at autofilter for a long time and was pleasantly surprised apple have added 2 important tools to it namely the High Pass and Band Pass filter options.

I'm with you!
I just bought new Envy 17 laptop and quickly became furious with the audio fluctuations due to Beats Audio 'Enhancements'. Searched the internet and found a solution, fixed and stays fixed!
While logged into the PC with administrator privileges:
1) Open Device Manager
2) Scoll down to 'Sound, video and game controllers'
3) Right click on the audio device listed and click on 'Properties'
4) Click on the 'Driver' tab
5) Select 'Update Driver...'
6) In the window that opens, click on 'Browse my computer for driver software'
7) In the window that opens, click on 'Let me pick from a list of device drivers on my computer'
8) From the list of available drivers Select 'High Definition Audio Device' (The generic Microsoft Windows Driver)
This completely removes the OEM driver AND Beats Audio 'Enhancements'
I'm now enjoying clear, crisp, clean, high fidelity music. I listen using iTunes (free) that has a build-in equalizer, also verified it works great now with Windows Media Player.
Good Luck!!!

Similar Messages

My Iphone 4s suddenly turned off, and now will not reset. I've done recovery 15 times and each time it says it has failed and prompts me to do it again! Help!!!

Today my phone was working perfectly, about 2 days after updating to IOS 7.0.3. I came back to my desk, and then the screen wouldn't turn back on. After I plugged it into my Imac at work, it gave me the silver apple sign, but then it would turn off, then apple back on, then off... and so on...
I read all of these posts on the community, so I did the reset (did all sorts of variations from 10 seconds to a full minute) seconds while holding power and the home button... nothing. Then tried a reboot by holding for 10 seconds, letting go of power, and then plugging my phone into my computer which prompted the itunes and plug sign on the screen, which also prompted Itunes to do a recovery. Went through recovery, and it FAILED. I've done this cycle now 15 times, on 2 different computers, one an Imac, and one my windows laptop at home. Tried with an old version of Itunes, and an updated Itunes.... NOTHING WORKS! Do I have to drive 3 hours to have an apple store look at it???? Help!!

According to this article: http://support.apple.com/kb/TS3694#error21
Error 21- These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
The error on the Mac is odd though. 2100 is not in the article. What version of the Mac Operating system are you running?

The screen on my iPhone 4 went black and randomly started vibrating nonstip for about 3 minutes. It has stopped and now won't turn on. Has anyone else had this problem? What should I do?

I've tried to charge it and i've tried to reset it but it won't even connect to iTunes. Please help!

Don't know why it happened, but if you can't enter the passcode, you'll have to restore the phone to remove it, as explained here: http://support.apple.com/kb/HT1212. If you're running iOS 7 with Find My iPhone enabled, you'll have to force it into recover mode to restore it, as explained here: http://support.apple.com/kb/ht1808.

My Mac Mini/Yosemite is new. But it now has malwares and Mac Keeper keeps popping up even after uninstalling.. Who can help?

Hi everyone,
My mac mini is new. I have a few issues with it.
But the most annoying is the malwares that infested it now. I have only been using it for about 3 weeks or so. Of course, I thought everything that popped up are safe to click and just standard to click. I don't know yet what's best. Either, I figure out how to remove these ads / malwares or I just thought of reformatting it and start anew with it.
What would you guys recommend and please include steps for me to follow. I'm no techy.
By the way, I do not see these extensions on my Finder files (Conduit, also known as Trovi, MyBrand, or Search Protect, etc.) As a matter of fact, my extensions folder is empty except for the Adblock and AdBlock Plus that I recently installed to kill the ads. However, it worked but it didn't stop MacKeeper and Facebook ads from popping to a new window each time I click a link, or just a space on a safari)
On YouTube, when I watch a video, every second, the other videos are pushed down for as long as i watch, they are kept being pushed down. These are done by ads that are being stopped by the AB and ABP. yes, the ads do not appear. Just a white space forever adding up. Very frustrating. Please help.
Thanks in advance!

How to uninstall MacKeeper - updated
How to Remove MacKeeper
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

I dropped my mac book pro and the screen now has black and coloured lines in the corner. what is it and how can i fix it?

I dropped my mac book pro and the screen has now got a black rectangle and pink and green lines down it. What is it and how do i fix it?

Sounds like the display got damaged. Connect an external display and see if that's OK. If that's OK then the display is probably damaged. You can try reseating the LVDS connector but if that doesn't help the connections on the display body are very difficult to get to. Apple would just replace the entire display and that's what I would do as well.

After Time Machine restore,now apple logo and spinning gear

Ok, so my iMac crashed recently. I used Time Machine to restore. I got the "Successful" message,and clicked to reboot. Upon re-boot, it gets to the grey screen with the apple logo and the spinning gear and it freezes up there. I've turned off and on numerous times and get nothing different. I'm frustrated to say the least....
I know I've seen a topic here somewhere similar to this, but can't find it now. Is there anyone out there that can help me figure this out? I've done the disc utility and everything checks out fine...
Thanks in advance

Does it boot into Safe Mode?
If not, does it boot into Recovery System? If so, launch Disk Utility there and repair the HDD.

Finder now has Restart and Restart... options

I dropped my keyboard last night and picked it up and I think I accidentally hit some key combo that activated some settings.
Under Finder>Apple Menu, I can now see options to Force Quit... (the ellipses are on purpose and in the menu), Force Quit Finder, Restart..., Restart, Shut Down..., Shut Down, Log Out..., Log Out.
When I open an application, the Apple Menu, while running the application will have the option to Force Quit..., Force Quit [Application Name] now too.
I've also noticed that boxes are now highlighting strangely. For example, when I click on the address box in Safari, there is now a thick black square highlighting the address bar; when I click in the Google Search area, that gets a thick, black square highlighting that...
Anyone have any ideas on the keystrokes that I accidentally hit on the keyboard to get it doing this?

Turn off VoiceOver in System Preferences >> Universal Access
EDIT: Hitting F5 key probably caused it.
It seems it causes double answers on posts too
-mj
Message was edited by: macjack

I transferred an audio book to itunes, it showed up and now has dissapeared, and I wanted to sync it to my ipod touch.

I transferred an audio book to my itunes ok. Now I can't find it. The "transfer wizard" says that it is on my ipod. How do I find it? Frustrated.

You can currently only download audiobooks once from the store - have you not got a backup copy of it anywhere e.g. on an external drive ?

I rented a week ago movie, and it expired, but sense then, my iPod keeps saying, "your rental time for 'The Smurfs' has expire, and it keeps popping up. how do I fix this?

I hope to get this fixed soon.

What are you doing when the message poss up?
maybe:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Installed iOS5 into iPod Touch 4g TODAY. Was working but now has frozen and the Screen is all white. Tried to do a Reset but did not work.

how to reset after iPod Touch has frozen with screen all white ?

Try here. It covers white screen.
iPod touch: Hardware troubleshooting

HT5313 How about fixing the bugs in iCal? and Sleep Mode?

The 10.7.5 update sure has a lot of fluff patches. When is Apple going to fix something important, like all the bugs in iCal? And the bugs in Sleep Mode?
Examples:
• iCal events tend to pop up 30+ minutes late all day if I sleep the computer overnight. This has been going on since 10.3.9.
• Network Issues: iChat sessions via Bonjour have to be manually restarted after coming out of sleep.
• Disks mounted over the network dismount during sleep.
• Screen Saver doesn't play well with other apps: I lock the screen when I'm away from my desk. If Firefox starts using all available CPU time while the screen saver is on, screen saver won't exit. This can make it very difficult to get control of the machine.
How about a patch for the above?
I'm a professional software engineer, so spare me the Blame The Customer tactics.

PS. Best Example:
• Last week I almost missed an appointment because iCal decided I wanted to be alerted to this event 9 hours after it happened. ... Maybe you think I typed it into iCal wrong. So what if I did? WHO THE #@$! WANTS AN ALERT *AFTER* AN EVENT HAPPENS? Why is it even an option?

I was using my iPhone 5 and the screen now has black

I was using my iPhone 5 and my screen now has black and white lines on it. I'm unable to do anything on it. Any suggestions please?

Sounds like you'll have to take it in to the Apple store for service. This happened to my wife's iPhone and they just replaced it.

The context has expired and can no longer be used errors making farm unusable

There are a couple of other posts on this forum about the message "The context has expired and can no longer be used" but they all suggest something related to time and time zone differences. This is not the case in my farm and I have disabled
the security checking of requests on my web applications. Hopefully someone at Microsoft is very aware of this and is working to resolve it because my farm and many others are unusable like this.
I have dug through all of the ULS errors when it happens and there is nothing useful. It barely even registers as a message although, I have not turned on verbose logging, which I am about to try. I have SP 1 installed. Just to be clear, this is happening
on SharePoint 2013 Enterprise.
I have been fighting this for a month. I can add a few things about the farm I am trying to fix:
1. It was a WSS 3.0 farm that when through a 2007-2010-2013 migration in short order.
2. I believe it is under-powered on the hardware side. All VMs on a host shared with 40 other VMs, some fairly busy. Here's the virtual farm breakdown:
-1 WFE with 12GB RAM and 2 cores
-3 app servers with similar resources
-No paging file on C: on any VM. This is a decision by sysadmin. Paging on D: is system managed. Probably irrelevant.
3. Rapidly clicking from link to link seems to bring on the failure much sooner.
Any suggestions even about how to troubleshoot this would be appreciated.

Ultimately, I think it is a time sync issue across the farm. We still have request management off on all boxes because I cannot get the admins to resolve this issue but, in my lab environment I ran into a similar thing.
I may turn RM back on later to see if it comes back but here's what I think happens: In production we have 2 ESXi hosts and our SP environment is all AD (of course). The clocks are all out of sync, sometimes beyond 5 minutes. (The time sync for AD is something
I believe a lot of admins don't understand when running virtual.)
If you allow ESXi to try to sync the time for all guests you run into problems. Maybe they are more pronounced with SharePoint. Anyway, VMware and AD start fighting over the time (check your event logs) and, for us, the clocks across the domain get out of
sync beyond the 5 minute allowable window.
I recommend disabling time sync from host to guest and do what MS recommends: make your domain controller the master time server and configure it to get its time from a reliable source (which can be a single hardware host over NTP). Make other domain controllers
sync from the PDC. The other windows machines will all sync to the domain when they log in. This will prevent SharePoint from issuing tokens from one machine that are out of sync time-wise with the other machines and thus throwing the "Context has expired
and can no longer be used" errors.
Note that disabling host to guest time sync is not as simple as just clearing / un-checking the box in the VSphere client. That doesn't do it. You will need to Google for the 6 or so custom properties you must add to each guest to prevent VMWare from re-synchronizing
after certain hardware events.

I am backing up my computer to an external hard drive using Time Machine. It has been at 288.91 "used" for a while... should I just let it ride? It's been going for about 7 hours now.

I am backing up my computer to an external hard drive using Time Machine. It has been at 288.91 "used" for a while... should I just let it ride? It's been going for about 7 hours now

It does not immediately delete the files that are missing.. it merely tries to backup the new files it has discovered on the external drive. Since you moved the files there, the backup at least for a while will contain both copies.. and that is why it doesn't have enough space to backup.
Fixing the problem.. hmm pondini is the expert.. you should be able to delete the backup of the photos in existing backup.. there are instructions to do it.. but it is a very poor way to do things.
Much better. .archive off the existing backup.. this is long and slow but worth it. you need a usb drive of the same size as the TC drive. Then erase the TC and start a fresh set of backups.
The alternative is to use the USB drive as a new target.. but it is much slower than the TC internal drive.
http://pondini.org/TM/12.html

Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time

Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked.
Any advice?
Thanks.
Alex.

Cannot figure out what your talking about since it makes no sense.
If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
You must log in with your cell number and your my Verizon portal password. Not the account pin.
Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
If you don't have the information then there is nothing they can do.
If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
Good Luck

Whoo hoo about time... Auto Filter now has HP and BP modes

Similar Messages

Maybe you are looking for