Wht is the tcode to include and report on the sap main screen?

Hi all,
What is the Tcode to include any program on sap main screen?
like when we logon to the sap, it will display abap editor, etc.... i want to include one more item there, can anybody let me know how to do that?
thanks

I placed the cursor on desired node and select EDIT->INSERT MENU ENTRY->INSERT AS SUB NODE
but it says node cannot be inserted at desired position.
I tried with same level as well, but its not working.
If i click on change nodes, its saying "changes nodes change be done through Enhancement ID"
can suggestions?
thanks

Similar Messages

How to include a report into the SAP-SCRIPT

plz tell me
How to include a report into the SAP-SCRIPT
ASAP

creat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*&      Form get_data1
      text
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data1 TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*&      Form get_data
      This form is to read details from LIKP    *
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
   READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM.                    "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

Parameters and report on the same page

I am new to HTML_DB. I would appreciate your help with the following:
I have html page with items(parameters) and report on the same screen.
Items are:
Customer: Select list with Submit
Invoice No.: Select list - Populated invoices numbers for the selected customer
Department: Select List
Prod Month: Date Picker
Button: Report View.
Users can select any of the above parameter to create a report. The problem is when I don't select any customer and just select the department or prod month and click on a Report View button, I get SQL error in the Invoice Number item.
It seems when the page refreshes to create a report Invoice Number items sql query is executing but when it does not find the customer name, its giving the error.
If I select a customer name, the page gets refreshed and the report is generated. I dont want to create a report when they select a customer. I want them to select the parameters and click on the Report View button to create the report on the same page.
Thank you.
Regards,
Rek

Sounds like you are building the query string and submitting that and the fact that they leave something out messes up that string...<br><br>If that's the case, you can add validations to the page to make sure they enter in all the appropriate information.<br><br>
chet

Form and report on the same page...

Hi,
I want to have a form and report on the same page... as soon as user enters the information and submit the form via button then the report should be able to display the addition...
may I know how to accomplish this...
Thanks in advance

Hi
Can you try like this
1.First create an empty page and add a html region and template as form region and add the necessary fields to insert into table
2. create a another region with type as "SQL Query" and template as report region and add the necessary fields for the reports.
Once u entered the details into form region and created process and insert into table and then automatically the report region query will fetch the recently added row and displays in the report.
Hopes this might helps you.
Thanks & Regards
Srikkanth.M

How to deploy existing forms and reports on the web

Hi Guys,
I have 6i forms and reports within our environment, and we are running client/server architecture, by installing forms and reports runtime on each client PC's. We would like to get rid of this by deploying forms and reports on the web, without zero coding. Can any one suggest and guide me through the process with proper security mechanism enabled along with.
Thanks in advance,
Aji

Thanks for the update,
We have a develpment 10g AS environment setup made,
1) But we are really confused how to present the forms and reports.
We have around 250 forms and reports running on client/server architecture. All these forms/reports have been copied to a fileshare and access control is restricted by folder security.
2) How to deploy forms - entries within formsweb.cfg with Named Configuration sections.
3) How to deploy reports, as to were to copy the .rep files.
getting the following error
REP-110: Unable to open file 'Car_Readings.rep'.
while trying
http://kddsvr6.kddc.com:7778/reports/rwservlet?report=Car_Readings.rep&userid=username/passwd@db&desformat=htmlcss
Thanks in advance,
AJi

Difference between Asset Intelligence 09A report and reports in the Software Metering folder

Dear all,
I can not seem to grasp the difference between Asset Intelligence 09x reports and reports in the Software Metering folder. Do they extract conclusions based on the same data and which data are those? I also have come to notice that there are occasional dicrepancies
between them. Why would this be?

Hi,
1. Software metering allows you to create a rule and meter application usage very granular, when it is started, how many times , how long it has been used e.t.c, Asset intellegence doesn't require you to create any rules it will only inventory start/stop
so you can get reports like "all computers that hasn't started a application in x days".
2.It depends on the license agreement for that application, but yes you can get how many has started a specific application within a timeframe.
3.No
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Can any one explain me the relation between BDC and reports events?

hi experts.....
can any one explain me the relation between BDC and reports events? we are using report events in BDC programmes why?\
Is reports events occurs in each and every concept in ABAP i.e creating custom idocs, smart forms, sap scripts, dialog programmes, module pool technics?
thanks in advance

The forums are expert forums. So the first thing I would do is change your name.
It's like entering a grand prix in a car with a "Student Driver" sign.
Rob

Calling oracle9iAS Forms and reports into the portal

Hi !
Could it possible to call a Forms and reports in the portals? if yes ? How?
In my case I have to generate lots of reports..like printing reports in the different tray of printer through portal ? Could this be achieved by Oracle Portal ?
thanks in advance
chris

Do you know how to do it by now.
Thanks.

What are the versions of BW and what is the difference between them

what are the versions of BW and what is the difference between them

Hi Reddy,
SAP BIW 2.0a, 2.0b
               3.0a, 3.b
               3.1c
               3.5 and Now BI 7 are some of the versions.
Major difference between BW3.5 and BI 7.0 versions:
1. In Info sets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for Infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accelerator is a separate box and would cost more.
4. The monitoring has been improved with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal.
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passé! Yes, you can always revert to the old Tcodes.
7. The *Data Warehousing Workbench *replaces the Administrator Workbench.
8. Functional enhancements have been made for the Data Store object:
New type of Data Store object, Enhanced settings for performance optimization of Data Store objects.
9. The transformation replaces the transfer and update rules.
10. New authorization objects have been added
11.*Remodeling *of Info Providers supports you in Information Lifecycle Management.
12 the DataSource: There is a new object concept for the DataSource .
Options for direct access to data have been enhanced.
From BI, remote activation of Data Sources is possible in SAP source systems.
13. There are functional changes to the Persistent Staging Area (PSA).
14. BI supports real-time data acquisition.
15. SAP BW is now known formally as BI (part of NetWeaver 2004s). It implements the Enterprise Data Warehousing (EDW). The new features/ Major differences include:
a) Renamed ODS as Data Store.
b) Inclusion of Write-optimized Data Store which does not have any change log and the requests need no activation
c) Unification of Transfer and Update rules
d) Introduction of "end routine" and "Expert Routine"
e) Push of XML data into BI system (into PSA) without Service API or Delta Queue
f) Introduction of BI accelerator that significantly improves the performance.
g) Load through PSA has become a must. Info Packages are used to load data upto PSA only.
    You need to create DTP to update data from PSA to Data Target.
Regards,
Ram.

I am trying to burn a CD from a playlist in iTunes. I set everything up, and then when it tries to burn, it cancels the burn right away, and gives me the error code: 4251. What am I doing wrong?

Okay, so I wanted to burn a CD to play on players in the house. The songs on my playlist are from CDs that I own and imported into my iTunes. Here are the steps I've taken:
1. I created a playlist
2. Selected File > Burn Playlist to Disc...
3. My Burn Settings are as follows: Maximum Possible Speed (I have tried all the other speeds as well with the same result), Audio CD (No gaps between songs), Use Sound Check is selected, Include CD Text is selected (I have also tried unselecting these two options).
4. Then I clicked Burn
5. Within a couple of seconds "Cancelling Burn" shows up in the window at the top of the screen, and a box pops up that says: The attempt to burn a disc failed. An unknown error occurred (4251).
I have tried different CDs, I have changed all the settings in the Burn Settings box, and I get the same result over and over again. I researched the error 4251, and it refers to a problem with importing songs from a CD. This is totally irrelevant since I'm not trying to import, I'm trying to burn. This is a blank CD, and it is a CD-R. These CDs are off a tower I purchased less than a month ago, and have had absolutely no problem burning other things to these CDs. I really don't want to have to re-import these songs to Windows Media Player or another application just so I can burn what I want onto a CD, but this is almost the point I am at.
iTunes certainly isn't helping me much at this point, and I would appreciate any feedback into what I am possibly doing wrong in trying to create a CD.

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

What am i supposed to do when my mac says it's in the not charging state and says that the battery is holding a significantly lower charge than normal?

what am i supposed to do when my mac says it's in the not charging state and says that the battery is holding a significantly lower charge than normal?

Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you are running 10.7 Lion or 10.8 Mountain Lion), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information from the top of the page back here.

Filtering a Report on the active record of another Report on the same page

Hello,
I have a Form and Report on the same page in an APEX app. The interactive report is used for sorting/filtering etc. and the Form is used to present the data for one record at a time, as well as allow updates in selected fields. This was done using the wizards, the little 'edit' button is clicked to change the form to the selected record.
I also have (or want to have) a second non-interactive report on the page, which displays some records based on the record of the main report that is currently selected and appearing in the form.
I tried doing a simple 'SELECT fields WHERE link field is equal to main report', but it always says no data found.
Basically, I need to be able to have a query for the second report that says 'SELECT these fields WHERE the site is equal to the site currently being displayed in the form'.
When the little pencil/paper 'edit' button is clicked on a report, does this set some ActiveRow or something like this that I can use to filter the second report?
As you can tell from this post, I am in my database skill infancy, and any literature/pointers on how to achieve this (outside of MS ACCESS...) would be appreciated.

Okay, I have somewhat got my head around Column Links, and have put the key link field into the URL:
The value is P4_MDF, and in this URL example it has taken the value of 'WLAH01'
f?p=880:4:3924084145794812::NO::P4_MDF,P4_ESA_CODE,P4_SITE_NAME:WLAH01%2CWLAH%2CWYRALLAH
Now I just need to work out how to use this value in the URL to filter the classic report.
I have used this query:
SELECT *
FROM
"MACHINE_INFO"
WHERE CCP = :P4_MDF
As CCP in the report im trying to filter is the same as MDF in the IR that I am clicking the Column Link
This is the Debug for the 2nd 'filtered' report (which filters everything)
0.09: show report
0.09: determine column headings
0.09: parse query as: EXPAT
0.09: binding: ":P4_MDF"="P4_MDF" value="WLAH01"
0.09: print column headings
0.09: rows loop: 15 row(s)
I'm slowly getting the hang of this, any assistance would be great!

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

At present I am using Firefox-25. The firefox quits without rasing the Browser.ShowQuitWarning(True) and my all the opened important tabs are closed instantly.

I have tried everything but no results. I am used to Firefox so don't want to switch to another browser. But this is a serious bug indeed.
When I quit Firefox, it quits without giving me the option to save the current opened tabs and every time when I restart it, it starts with previous session with all tabs once again. Which is really annoying.
Looking forward to your support ASAP.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back soon!
Hope this helps!
Curtis

Challenge - Where is the best place to host reports given the following limitations?

Hello All,
I am going to box everyone in a little bit here but where is the best place to host reports given the following restrictions:
Cannot be within a BPF
Cannot be accessed from via the EPM folders
The crux of here is that some of our end users only want to go and run reports much like you would in a traditional BI environment. Given that BPC has no concept of a portal page for hosting such reports we need the next best thing. Currently we are posting reports to the documents folder but the downside of this is that we need a distinct copy of a report for each environment (DEV, QA, PROD) which is quite unfortunate. Coming from a traditional the seems ridiculous.
Cheers,

We use EPM folders to save the reports.
Perhaps for your requirement, you should look to Web forms and Web reports..

Wht is the tcode to include and report on the sap main screen?

Similar Messages

Maybe you are looking for