Why am I being denied access to Behance when I've been a member since April 2013?
I just tried logging in to Behance and it gave me the following message:
Access Denied
You no longer have access to this service. Please contact Adobe Customer Support if you believe this is an error.
Please follow this link.
Following "this" link just leads you back to the login page and gets you the exact same access denied message. I'm very confused because I've never had trouble logging into my Behance account before.
Hello - this was a temporary glitch - if you login now you should be good to go. Sorry about that!
Similar Messages
-
Note to moderator(s):
Please remove the other post
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/d4e30da8-5234-4373-963f-c165b99f8df2/bids-2008-refresh-dsv-why-does-it-keep-indicating-it-added-things-when-its-already-been-done?forum=sqldatawarehousing
There were a number of changes done and earlier I had used the "refresh" button in the DSV view, and the updates were reflected in the DSV. Now, however everything should be updates, yet when I hit refresh, the dialog still comes up and list
all the changes it did earlier as "Added". What is going on here?
Now however, all my tables, dimensions, relations etc are setup with no errors and the cube builds, processes and deploys without any errors, yet if I refresh the DSV, I still get the dialog that displays all the things that it "sees" as "Added".
This is even after closing down BIDS and re-opening.
Also, I wonder if this has something to do this this thread, since its concerning the DSV getting "confused"
https://social.msdn.microsoft.com/forums/sqlserver/en-US/33918238-cbe0-4017-bec9-0fe1bad15909/refresh-dsv-gives-net-error-column-argument-cannot-be-nullHi Shiftbit,
According to your description, you need to know why the dialog still comes up and list all the changes it did earlier as "Added" when there is nothing changed in the data source view, right?
I have tested it on my local environment. We use the sample project AdventureWorks, we didn't make any modification on the DSV and click the Refresh button, and all the changes were list on Refresh Data Source View dialog. So as per my understanding, this
is default settings. If we click the button, it will list all the changes from the date when you create this project.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback Your feedback enables Microsoft to make software and services the best that they can be.
Regards,
Charlie Liao
TechNet Community Support -
I pre order Iphone 6 this morning. Why was I charged a $30 upgrade fee when I havent been in a contract for almost 2 years? Also will they divide the price of the device over several bills like they have for me in the past?
Hi there nursegrl02! We can help here with your questions regarding the upgrade fee and device charge. The upgrade fee is a one time fee that is applied when upgrading with a 2-year contract. If you pre-order with a two-year contract, you would need to add a credit card to your order as you will be charged for the device once it ships out. If you happen to purchase the iPhone with Verizon Edge, there is no upgrade fee. You will also be billed for the device in installments. You may have to pay a down payment with Edge. Go to vzw.com/edge for more information.
Did you upgrade with Verizon Edge or our Device payment plan in the past? If so, that is most likely why you were not charged an upgrade fee.
Let us know if you have further questions.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
Why is firefox suddenly denying access to reliable websites calling them "untrusted"?
My husband has been using a reliable medical site for years...suddenly the message popped up "untrusted site." We contacted the site--they connected us to their tech support--he tried everything with us over the phone (cleaning cookies, downloading latest version of firefox) but the only way to solve it was to give firefox the go-ahead to ignore their warning. We then got the site. Today, the same message popped up on another site he uses regularly. Any ideas why this should suddenly happen on reliable sites used successfully for years?
I would like to block this site. Kindly help me to block this site.
-
Trying to create a table but being denied access
Hi everyone,
I'm relatively new to APEX. I've been building applications on the apex installation we have at my job, but this is the first time i've actually tried installing this stuff at home.
I was successfully able to get 10g XE installed at home, and i was able to upgrade apex to 3.0.1.
I logged into apex (i tried both the SYSTEM account and the extra workspace developer account i made) and i tried creating a table, but kept getting the following:
Creating table "TESTTABLE" failed.
Failed Creating Table ORA-01031: insufficient privileges ORA-00942: table or view does not exist ORA-06510: PL/SQL: unhandled user-defined exception
The interesting thing is that I was able to make the table if i chose NOT to have a primary key generated. But if i tried to make a table that had a primary key "Populated from a new sequence" then that above error resulted.
Anyone have a clue on how I can fix this problem?
Thanks!
-JohnJohn:
I recommend that you login to the administration interface as the ADMIN user, and create a new workspace. Once you create a new workspace with a new schema, you should not experience the problem you describe. First, make sure you follow Step 3, of the How to Upgrade section of the following document:
http://www.oracle.com/technology/products/database/application_express/html/3.0.1_and_xe.html
This will change the password for the ADMIN account. Now go to:
http://localhost:8080/apex/apex_admin
Supply ADMIN for the username and the password you supplied following Step 3 in the document above. Click Manage Workspace, Create Workspace, and then complete the wizard to create a new workspace.
Thanks,
Jason -
One computer, can't sign into ICloud "encountered an error trying to connect to server". On the other computer left myself signed in and now can't access contacts or notes: "Can't load Contacts/Notes as there was a problem loading the application". This has been going on for about 3 weeks. What is up and what is being done about it?
Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards. -
Why am I being billed for e-mail when I have a BT ...
We moved back to BT for Broadband and TV so I could retain my BT email without having to pay extra for it, but I am still being billed. Why is this?
If you were paying for BT Premium email you would need to cancel it if you no longer want it. It will not automatically be cancelled when you become a BT customer. Call BT on 0800 111 4567.
Before doing that make sure that the email address is linked to your BT Broadband account. See link how to do that.
http://bt.custhelp.com/app/answers/detail/a_id/44864/~/bt-mail%3A-can-i-link-my-existing-email-addre... -
Why doesn't my NB505 access the internet when I bring it to a WiFi location?
I have a NB505.
I have brought it to a Dunkin Donuts and to several Starbucks so as to get WiFi
The notebook just does not work as far as accessing the internet at a WiFi location.
Do I have to set it up somehow?
Does a NB505 have no capacity to access the internet through WiFI?
Help pleaseSince posting that question I have found out how to use the notebook in a WiFi place.
Thanks.
However also since that posting, my laptop has seemingly konked out.
See my other post -
Why am i being asked to install 64bit when thats what I installed?
I've just reinstalled iTunes version 11.1.5 to my laptop. It says its 64 bit but when I try to conect my iPad the messgae I get is "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove itunes, then install the 64-bit version of iTunes." Whats going wrong?
Hi Loopy B,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having installling iTunes for Windows on your PC:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I hope this information helps ....
- Judy -
hi
recently bought a 4s iphone. Tried to add music in the same way as with an ipad but the music does not show. It says that there is no content on the iphone. It appears that the music takes up memory but I am not able to play it. I have tried to sync the phone but this does not appear to work.
Do you have any advice?
many thanksHi Gail
Thanks for your initial response. When I plug my phone in it is recognised as a device in iTunes. I have tried dragging songs from iTunes to the phone. The rotating symbol appears to say it is being added but it will not appear on the phone. I have also tried to add music by creating a playlist and then syncing. The memory changes to say music has been added but again no music appears on the phone.
Let me know if you require any further information.
Hope you can help
Chris -
Why is my Ipad asking to be activated when it has been activated for the past 2 years?
I restarted my ipad and now it is asking to activate. The ipad attempts but with no success since last night. It keeps telling me that the serve is down-but since last night? I connected to itunes but it does not recognize the device. Please advise.
Did you recently restore or update your iPad?
Do you have the app Cydia on your iPad? -
Why do files show in all my files when they have been deleted
In finder > all my files > there are files that have been put in trash yet they show up when I delete them it wants me to fix alias but won't work because the file has been deleted
Have you tried to drag the alias to the desktop?
When you look at an alias, what folder is it stored in? If you highlight it, it should show the information in the path bar at the bottom of the finder window. If the path bar isn't visible, click on View and select show path bar.
You may try to repair permissions using disk utility and see if that helps. -
Trying to post my question and being denied, why?
I had an incident happen on my MacBook Pro and needed help with it. I created my question and clicked POST. After I clicked POST nothing happened and it appeared my question did not post. I thought something went wrong with posting my MacBook Pro question. I checked my activity page and looked for my new entry and it was not listed. I went back and tried to post again. This time I was sent a pink banner that read "You are not allowed to create or update this content." At the bottom of my question box it said "Auto-saved" with the date and time listed. I am confused now. I have searched all over looking for my question. It's no where. What has happened to my posted question? Why am I being denied access to it?
The Forum is haunted with glitches, you ran in to two. If you get the you can't post message first refresh the page if that doesn't work try a little later. If you get the message auto-saved versions etc,. tap recover or type a new question. If you find your question is in the wrong Forum reply to yourself and ask if someone will ask a host to relocate your post.
-
SAP PI problem: User credentials are invalid or user is denied access
Hi!
I am about to configure SAP PI.
Therefore I have run post installation wizard step PI_00 and get the following errors:
Error: Not able to load Function SWF_XI_BPM_AUTO_CUSTOMIZE
(cause:Name or password is incorrect (repeat logon)).
Step: Execute SWF_XI_BPM_AUTO_CUSTOMIZE
Error: User credentials are invalid or user is denied access
Step: Add Installed Product2
Questions:
How can I identify which user/password makes problems here?
P.S.
My further problems are:
2) It is not possible to work with XI tools, such as:
Integration Directory, Integration Repository, Runtime Workbench
When I try to execute some action in these tools I get the following error:
Cannot connect to Repository
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access.
2) When I try to access the NetWeaver configuration wizard (http://localhost:50000/nwa)
I get the followign warnig:
System Landscape Directory is not available
Only local systems can be maintened
Thank you very much
ThomHi,
Check the similar discussion Error in PI postinstallation wizard
Wrong password PISUPER in PI_00 wizard
Thanks!
Edited by: Sudhir Tiwari on Nov 26, 2008 10:29 AM -
Why do Sony DSC-RX100M3 raw files look strange in PE9 when flash has been used in the shot?
I have just bought a Sony DSC-RX100M3 camera and use it to shoot raw + jpeg. I want to use the raw files in my Photoshop Elements 9, which has the Camera Raw plug-in version 6.5.0.216 installed. I have downloaded the Adobe DNG converter version 8.7.1.311 so I can import my Sony raw files into PE 9 as they cannot be used directly. Most of the time these raw files look OK, but when I use the flash on my camera and then look at the raw files in PE9 they look far more pink than the corresponding jpeg files. The jpeg files look more or less as I remember the scene when I shot the picture.
When I look at the same raw and jpeg files in Sony's own Image Data Converter software (version 4.2.04.17270) the raw and jpeg files look very similar to one another, and there is no pink colour cast in the raw file.
What am I doing wrong in Photoshop Elements? I though the DNG converter keeps all the information from the original raw file and makes no changes to it, so why does the raw file look so different when flash has been used?
Thanks for any help you can give!
AVMLooking at the pictures of the camera online, I'd say there is no lens shade--a device to keep light from the sides from causing lens flare--and the camera lens, itself, was just too far extended and there was a lens shadow. You probably can't use the flash that close up and should back off and zoom in further. Experimenting would give you a sense of what situations will have a shadow of the lens or not.
Your ACR plug-in is old enough not use have Process Version 2012, yet, only 2010 and 2003 so Adobe didn't have the idea to put the selector down next to the camera profile. The toning options are better with Process 2012 so that would be a reason to upgrade, but I am not sure that the Camera Neutral profile in PSE9 would be different than PSE13. If Adobe changed the camera profiles then people's pictures would look different once they upgraded to a new version and that's not something that's supposed to happen.
You can certainly download the PSE13 trial and see if things look any different, but they may not: Download a free trial or buy Adobe products | Adobe downloads There would be newer minimum OS version requirements for the newer versions of Adobe software so check those out before trying to install, unless you're on Windows 7+ or OSX 10.8+ then it should be fine.
One more thing, the White-Balance tint is set to +10 by the camera:
This As Shot WB is more magenta and even when using the Adobe Standard profile, moving the Tint down to +0 makes things a little more green like your camera JPG. So there is more than just changing the camera profile that you can do:
Maybe you are looking for
-
Time limitation of the questionnaire
Dear Helpdesk! I'm a satisfied Forms Central user since Aug. 2013. I created and used few questionnaires, and now I'm creating a new one. Now I have a problem. I would like to use this questionnaire as a test and I should use a time limitation. I mea
-
How to place a binary zip files using sftp receiver adapter
Hi experts, we got one scenario , where we need to pick the file (.zip) from local source path and place it in SFTP server path. we have done all configuration setting and processed a zip to SFTP server. but the client are saying the .zip file is not
-
Argh, errors installing gtk-libs
Pacman sez: error: could not prepare transaction error: failed to commit transaction (conflicting files) gcc-libs: /usr/lib/libgcc_s.so exists in filesystem (followed by about eleventy billion other "exists in filesystem" errors) I have not installed
-
Muxing problem -- Too fast, files don't work
I'm trying to encode a DVDSP 3 project. I'm choosing Single Pass VBR and "better" Motion Detection. I'm on a 1Gghz TiBook. The entire process, including Muxing, is taking a minute or two. This should take hours. The resulting video_ts folder can be p
-
I recently upgraded from CS3 to CS5 and I can't find the output Modules from CS3 to transfer to CS5 (the render settings are gone too). They are not in either presets folder. If I open CS3, the modules are there and I can use them but I can't find th