Why are we getting 'Coldfusion 10 application server cannot be found'?

Our ColdFusion 10 Application Server would not start. It was running fine since server inception back in July until I got back to the office from vacation yesterday. Looking at the Event Viewer 'application' log, it's showing the following message:
"The description for Event ID 259 from source ColdFusion 10 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: ColdFusion 10 Application Server."
I thought that the issue was caused by Hotfix 14. So I manually removed the hotfix and rebooted the server couple of times. However, ColdFusion still wouldn't start. Has anyone came across this issue before? I look forward to your response. Thanks.
Best regards,
Chung Lee

Hello Carl V.,
Thank you for you reply. I digged through the coldfusion-error.log and the exception.log and came across errors that were last generated on 12/17/2014. On the exception.log, it's showing the following:
"Error","Thread-17","12/17/14","15:15:54",,"Could not initialize class java.awt.Toolkit"
java.lang.NoClassDefFoundError: Could not initialize class java.awt.Toolkit
 at java.awt.Component.<clinit>(Unknown Source)
 at coldfusion.document.JPedalFontRegistry.init(JPedalFontRegistry.java:40)
 at coldfusion.document.DocumentServiceImpl.initializeDocumentService(DocumentServiceImpl.jav a:211)
 at coldfusion.document.DocumentServiceImpl.access$000(DocumentServiceImpl.java:52)
 at coldfusion.document.DocumentServiceImpl$1.run(DocumentServiceImpl.java:180)
"Error","localhost-startStop-1","12/17/14","15:15:55",,"Unable to initialise JAI service: java.lang.NoClassDefFoundError: java.awt.Toolkit"
java.lang.NoClassDefFoundError: java.awt.Toolkit
 at sun.awt.AppContext$2.run(Unknown Source)
 at sun.awt.AppContext$2.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.awt.AppContext.initMainAppContext(Unknown Source)
 at sun.awt.AppContext.access$200(Unknown Source)
 at sun.awt.AppContext$3.run(Unknown Source)
 at sun.awt.AppContext$3.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.awt.AppContext.getAppContext(Unknown Source)
 at javax.imageio.spi.IIORegistry.getDefaultInstance(Unknown Source)
 at coldfusion.server.CFService.setupImageProviders(CFService.java:707)
 at coldfusion.server.CFService.start(CFService.java:690)
 at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:110)
 at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:86)
 at javax.servlet.GenericServlet.init(GenericServlet.java:158)
 at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
 at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
 at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
 at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
 at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
 at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
 at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
 at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
 at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1559)
 at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1549)
 at java.util.concurrent.FutureTask.run(Unknown Source)
 at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
 at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)

Similar Messages

ColdFusion 11 Application Server 3284 | ColdFusion 11 Application Server cannot be found...

Trying to roll this server into production but keep having errors popup on Event Viewer:
After dealing with the issue of not being able to restart the CF service and applying the hf1100-3776060.jar hotfix - I continue to receive the following error
====================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
3284
the message resource is present but the message is not found in the string/message table
=====================
Any help will be greatly appreciated!
Thank you!

Hi Car, there were no errors registered by ColdFusion under the CF11\cfusion\logs coldfusion-error log but the error below continues to show during CF Application stop-start services.
Anit Kumar Panda - followed the steps and was able to restart all services. during that time i received the following error on eventvwr.msc
======================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
4140
the message resource is present but the message is not found in the string/message table
======================
Thank you, very much, for all your assistance!

I've been getting this message all day long, WHY? "Oops! This link appears broken. DNS error occurred. Server cannot be found.

I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found.

I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found.

Safari says "i cannot open the page because the server cannot be found" I get this on Safari and Mail does not function. Apps work like a dream. All Windows OS are screaming. Any thoughts?

Safari says "i cannot open the page because the server cannot be found" I get this on Safari and Mail does not function. Apps work like a dream. All Windows OS are screaming. Any thoughts?

You can check this thread for the answer you are looking for.
https://discussions.apple.com/thread/3685247?start=0&tstart=0

While viewing a page I suden get "Oops! This page appears broken. DNS Error - Server cannot be found." However I can back arrow to the page

I just upgrade to versions 18.0.1. I am suing Window 7 64 bit.
Now I while I am viewing a page I suddenly receive the error massage "Oops! This page appears broken. DNS Error - Server cannot be found."
I can use the back arrow key to bring the paper back.
If I have several tabs open, I can watch one tab after another change from the page name, It doesn't seem to matter who page it is, Yahoo, Washington Post, NBCNews,

I am not a techie. I keep 15-20 to tabs open at a time for reference while working. When I upgraded to this version, all my tabs were closed and my history was erased. I still have not recovered from that loss. I do not want to have this repeated!
If I was using pdfforge extension (what ever that is) before the upgrade, why is it venomous now?
Besides this issue, since upgrading I suddenly starting having the audio from commercials being played from tabs that are not active (open). I now have to leave my audio muted.
I expected assistance from Firefox not some unknown individual ( iamjayakumars) who for all I know is a troll trying to get me to do something to expose my computer to attack.
I allowed Firefox to collect data they needed from my computer when I submitted the question.
Fix the bug in your program! I have used Firefox since it came out. I am within a hairs width of switching browser. The only thing holding me with Firefox is my bookmarks. If I figure out how to export them, I am gone.
FIX YOUR BROWSER!!!

All the DTP jobs are routing to one application server

HI all,
DTP process job is triggering 3 child jobs all those child jobs are going to one application server, we have many DTP jobs all the jobs are routing to one paticular server that is causing application server to be hang(high cpu, memory utilization) .could you please suggest me in the process chain, is BI team can assign the application, i am not getting why dtp child jobs are executing only one application server, i have obesereved since 10 days it is happening. could you please suggest me how we can over come this.
Thanks & Regards.
Venugopal

Check tcode RSBATCH, If I'm not wrong DTP_LOAD process type is assigned to application server on which these DTP jobs are running. Remove that application server name and save.
Again use RSBATCH, under 'Background and Parallel Processes' tab, click 'Switch Off F4 Popup for Server/Host/Group', enter *** (star) under Users for 'Users for Whom NO Server/Host/Group Popup Should be Processed'. Now activate the PC and execute and check the DTP jobs.
Since u have 4 Appln Servers, best bet would be creating a server group. See the below link.
How to run Process Chain jobs WITHOUT a target server

Why we need ITS in application server?

Can we say that SAP application server acts same as J2EE application server?

Web Application Server roles are
1. Web Application Server provides a platform to run new and existing SAP Applications.
2. Supports ABAP for the ABAP Community
3. Supports Java/J2ee for the J2ee community
4. Applications can get advantages from both technologies
5. J2ee get the new features from ABAP technology
6. Common installation and administration
7. Same platform for all SAP Solutions, customer enhancement and development.
If you want to know exact information about WAS and J2EE....please refer this document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9b11c390-0201-0010-58a1-b08d5adc3b93

When i try to watch synced video on my itouch i get "the requested url cannot be found on this server". I am able to watch the video on my pc in itunes. however, i cannot watch it on my itouch.

When i try to watch synced video on my itouch i get "the requested url cannot be found on this server". I am able to watch the video on my pc in itunes. However, i cannot watch it on my itouch. It shows in the video window that the video is there but when i select it to watch it i get the message and then it goes back to the video menu. It's like it's not really syncing - even though it shows on my itouch. It doesn't seem to be specific to videos downloaded to the itouch directly or itunes directly. It's happening to both.

This is happening to me too. I recently purchased about 4 music videos from iTunes, 3 of them play on both my pc and my iPod Touch but there's one particular music video that will only play on my pc and gives me the same "The requested url cannot be found on this server" message when I try to play it on my iPod. Can someone please rectify?

SOA 10.1.3.3 Application server cannot use db 11.1.0.6.0 for orabpel user

RDBMS Version: 11.1.0.6.0
Operating System and Version: win 2000 sp4
Error Number (if applicable):
Product (i.e. SQL*Loader, Import, etc.): SOA Suite Application Server 10grel3
Product Version: 10.1.3.3
SOA 10.1.3.3 Application server cannot use db 11.1.0.6.0
For testing purposes I would like to setup a new system with Oracle Aopplication Server 10g rel 3 (10.1.3.3) Soa suite on top of an already installed Oracle Database 11.g (11.1.0.6.0)
Database 11g was installed on the server
During installation of the Application server 10g3(Full install) a database is needed (for orabpel schema etc), but the installer checks if the version of the database is higher than 9i2 . This check fails and installation cannot continue. I think this is because the check is not really if it is higher than 9i but it is looking for a predefined range of versions from V$VERSION and 11 is not within that range
Is there a possibility to overcome this? This is not a prerequisite check from OUI, but another check later on during install
I know that 11g is not certified yet for AS1og3, but this is a development environment to practice with the new releases.

I know that 11g is not certified yet for AS1og3, but
this is a development environment to practice with
the new releases.If the combination is not certified, it's not much of a development platform, right?

How do I add a selection screen parameter to get a application server file

Hi All..
Can you please suggest how can we add a selection screen parameter to get a application server file ?
Thanx in Advance...
Regards,
Deepak

Parameter def :
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 02(30) text-005 FOR FIELD p_xlfil.
PARAMETERS: p_xlfil LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Browse
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xlfil.
PERFORM ws_get_filename USING p_xlfil.
FORM ws_get_filename USING p_xlfil.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 def_path = 'C:'
 mask = ',Excel,*.xls,All,*.*.'(100)
 mode = 'O'
 title = 'Title'(101)
 IMPORTING
 filename = p_xlfil
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc NE 0.
 CLEAR p_xlfil.
ENDIF.
ENDFORM. " WS_GET_FILENAME
Regards
Oops i did not read "application server"
Use FM F4_FILENAME_SERVER and not F4_FILENAME/WS_GET_FILENAME.
Message was edited by:
 Raymond Giuseppi

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

Are threads in the application server preemptive?

Are threads in the application server preemptive or non-preemptive? That is do
they automatically yield to other threads running in the application server after
they have run for a certain amount of time or do they only yield when certian
points in the code are reached (eg when they have completed, when they reach a
remote call or when they explictly call yield()).

Green threads (way back in 1.1.8 and so on) was Unix only, and non-preemptive.
It was also very lumpy and unreliable. Old threading tutorials used to recommend
calling yield() and suitable points in your code - just like Windows 3.0 all over
again.
But all current JVM implementations use OS threading, and are pre-emptive (but
of course that doesn't stop them being blocked due to synchronization or I/O etc...)
simon.
Rob Woollen <[email protected]> wrote:
It would depend on the underlying JVM or OS. However I've not aware
of any Java
implementations that are non-preemptive.
-- Rob
Ash Beitz wrote:
Are threads in the application server preemptive or non-preemptive?That is do
they automatically yield to other threads running in the applicationserver after
they have run for a certain amount of time or do they only yield whencertian
points in the code are reached (eg when they have completed, when theyreach a
remote call or when they explictly call yield()).

Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message that X11 was not supported and directed to a sited to download XQuartz. Now when I try to launch WordSearch9 I get a message "X11 cannot be found.

Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?

Your report indicates Mountain Lion, but your footer indicates Lion. I'll assume you're on 10.8.2; on the current Mountain Lion version.
Rebooting is fine.
The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox. (But I don't know enough about that to be certain.)
Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version. (I'm assuming that site is where you got your Xquartz kit from, too.)
I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz.

Report Application Server was not found

Post Author: dgindy
CA Forum: Deployment
Product: Crystal Reports
Version: XI
Patches Applied:
Operating System(s): Windows 2003 Server
Database(s): SQL 2000
Error Messages: " An Enterprise Report Application Server was not found. "Steps to Reproduce:
So we have an existing CR 9 reports application server on a different system . We are trying to migrate over to crystal report 11 with out affecting it. I modified our .Net web application and uploaded it to the server. This is the error I'm currently getting. We have Enterprise XI install on the server so i'm stumped
Any Ideas?
Thanks
D

Hi Fade,
Ah, the SDK for CR for VS is not what you want. What you need to do is log into Service Market Place and go to the appropriate download section. The SDK is NOT installed as in previous versions with Crystal Reports Designer, it's a separate download now.
I assume you are also using CRSE 2013 then so you get the SDK from SMP:
Then in the list you'll see .NET installer for SP 1 or SP 2, you must use the same patch level as the Server:
If you don't see this option then please contact your account manager to give you access to SMP and the download section.
If you are not set up you will not be able to see the above.
Thanks
Don

Safari cannot open the page because the server cannot be found

Trying to open Outlook Webmail App from Ipad 2 and am receiving the Error Message "Safari cannot open the page because the server cannot be found.
I have tried resetting my ipad 2 to no avail. Internet connection is working and am able to get into other apps/sites. Read older posting that this could be a DNS issues???
Help?

The only other thing I can think of is to try a device reset (be sure and also close off all running apps beforehand):
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Why are we getting 'Coldfusion 10 application server cannot be found'?

Similar Messages

Maybe you are looking for