ColdFusion 11 Application Server 3284 | ColdFusion 11 Application Server cannot be found...

Trying to roll this server into production but keep having errors popup on Event Viewer:
After dealing with the issue of not being able to restart the CF service and applying the hf1100-3776060.jar hotfix - I continue to receive the following error
====================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
3284
the message resource is present but the message is not found in the string/message table
=====================
Any help will be greatly appreciated!
Thank you!

Hi Car, there were no errors registered by ColdFusion under the CF11\cfusion\logs coldfusion-error log but the error below continues to show during CF Application stop-start services.
Anit Kumar Panda - followed the steps and was able to restart all services. during that time i received the following error on eventvwr.msc
======================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
4140
the message resource is present but the message is not found in the string/message table
======================
Thank you, very much, for all your assistance!

Similar Messages

In ColdFusion 10 Java integration, app-context.xml cannot be found in the classpath

I have jars and dependencies from a vendor Java library that I wanted to use in my new CF10 environment, however the Hibernate/Spring dependencies of the library conflict with those within CF10 itself. To work around that, I had hoped to use javasettings in an Application.cfc to prioritize the library with the classloader, but the Spring classpath resolver seems to be unable to find a META-INF/spring/app-context.xml in the classpath even though it is within the jar.
Caused by: org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [META-INF/spring/app-context.xml]; nested exception is java.io.FileNotFoundException: class path resource [META-INF/spring/app-context.xml] cannot be opened because it does not exist
        at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBean DefinitionReader.java:341)
        at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBean DefinitionReader.java:302)
        at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinition s(AbstractBeanDefinitionReader.java:143)
        at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinition s(AbstractBeanDefinitionReader.java:178)
        at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinition s(AbstractBeanDefinitionReader.java:149)
        at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinition s(AbstractBeanDefinitionReader.java:212)
        at org.springframework.context.support.AbstractXmlApplicationContext.loadBeanDefinitions(Abs tractXmlApplicationContext.java:126)
        at org.springframework.context.support.AbstractXmlApplicationContext.loadBeanDefinitions(Abs tractXmlApplicationContext.java:92)
        at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFact ory(AbstractRefreshableApplicationContext.java:130)
        at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(Abs tractApplicationContext.java:467)
        at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicatio nContext.java:397)
        at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApp licationContext.java:139)
        at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApp licationContext.java:83)
Can anyone shed some light on why CF can't find this resource?
Thanks,
Dave

ReadPDF rPDF = new ReadPDF();
Class myClass = rPDF.getClass();
ClassLoader loader = myClass.getClassLoader();
URL myURL = loader.getResource("PreviewForm1210.pdf");
String path = myURL.getPath();
path = path.replaceAll("%20", " ");
// Create a PdfReader instance
PdfReader r = PdfReader.fileReader(path);
// Create a PdfDocument instance with the reader
PdfDocument d = new PdfDocument(r);
// Get page count and display on console
System.out.println("Number of pages in PreviewForm1210.pdf is " + d.getPageCount());

SSRS service application setup error - the network path cannot be found

I'm following the procedure for setting up a new Sharepoint 2013 instance with SQL 2014 reporting services, and got as far as step 10 here http://technet.microsoft.com/en-us/library/jj219068.aspx#sectionToggle4
before getting blocked.
I'm getting an error "Sorry, something went wrong. The network path was not found"
There are a few tips that I came across - none of which helped including a LoopbackAlternative reg edit for potential LDAP issues.
I should not this is a brand new install on an EC2 instance using Remote Desktop to connect to the Windows 2012 server instance.
I'd really appreciate any help in solving this. It's rather maddening that there's no better debug information available.
Thanks so much.

Can't say i've encountered this, but here are a few suggestions... Try right-clicking and running the setup.exe as an administrator. You might also try copying the installation file locally then running. Another thing to consider is connecting
to the doing an RDP session to the console, to see if any errors are being suppressed. This can be done by doing the following "mstsc /admin". Lastly, i believe a log file is generated when you run the setup. Not sure if it only generates
on a success or not.

HT5654 After updating iCloud application on Vista I am unable to access iTunes, I get the following message: (Need to reinstall application, APSDameon.exe, MSVCR80.dll cannot be found) I need some help rectifying this issue because I cannot reinstall

Hello,
I have installed the update that was sent on or around January 24th - 26th 2014, after the failure of the apple iTunes update the iCloud update was installed. Ever since these 2 updates I am unable to open iTunes and I receive the following message: (need to reinstall iTunes application, APSDameon.exe and MISVCR80.dll cannot be found). I have tried reinstalling iTunes and cannot do so, I really do not want and cannot afford to restore my pc to a previous date because of new data on my PC. I am requesting assistance from support so that I can rectify this issue, thanks in advance for any assistance you may provide.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Why are we getting 'Coldfusion 10 application server cannot be found'?

Our ColdFusion 10 Application Server would not start. It was running fine since server inception back in July until I got back to the office from vacation yesterday. Looking at the Event Viewer 'application' log, it's showing the following message:
"The description for Event ID 259 from source ColdFusion 10 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: ColdFusion 10 Application Server."
I thought that the issue was caused by Hotfix 14. So I manually removed the hotfix and rebooted the server couple of times. However, ColdFusion still wouldn't start. Has anyone came across this issue before? I look forward to your response. Thanks.
Best regards,
Chung Lee

Hello Carl V.,
Thank you for you reply. I digged through the coldfusion-error.log and the exception.log and came across errors that were last generated on 12/17/2014. On the exception.log, it's showing the following:
"Error","Thread-17","12/17/14","15:15:54",,"Could not initialize class java.awt.Toolkit"
java.lang.NoClassDefFoundError: Could not initialize class java.awt.Toolkit
    at java.awt.Component.<clinit>(Unknown Source)
    at coldfusion.document.JPedalFontRegistry.init(JPedalFontRegistry.java:40)
    at coldfusion.document.DocumentServiceImpl.initializeDocumentService(DocumentServiceImpl.jav a:211)
    at coldfusion.document.DocumentServiceImpl.access$000(DocumentServiceImpl.java:52)
    at coldfusion.document.DocumentServiceImpl$1.run(DocumentServiceImpl.java:180)
"Error","localhost-startStop-1","12/17/14","15:15:55",,"Unable to initialise JAI service: java.lang.NoClassDefFoundError: java.awt.Toolkit"
java.lang.NoClassDefFoundError: java.awt.Toolkit
    at sun.awt.AppContext$2.run(Unknown Source)
    at sun.awt.AppContext$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.AppContext.initMainAppContext(Unknown Source)
    at sun.awt.AppContext.access$200(Unknown Source)
    at sun.awt.AppContext$3.run(Unknown Source)
    at sun.awt.AppContext$3.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.AppContext.getAppContext(Unknown Source)
    at javax.imageio.spi.IIORegistry.getDefaultInstance(Unknown Source)
    at coldfusion.server.CFService.setupImageProviders(CFService.java:707)
    at coldfusion.server.CFService.start(CFService.java:690)
    at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:110)
    at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:86)
    at javax.servlet.GenericServlet.init(GenericServlet.java:158)
    at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
    at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
    at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
    at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
    at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1559)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1549)
    at java.util.concurrent.FutureTask.run(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

How to deploy a Flex application (Server Type ColdFusion) to production

I have built a flex application using Flash Builder 4.6. It utilizes ColdFusion Flash Remoting for its data services. When first setting up the data services I had to set a bunch of properties in the flex server section. Which I am not sure are all correct but the app does run and connect to the data services. They were:
Application Server type: ColdFusion
Use remote object access service
     ColdFusion flash remoting
Server Location:
     Deployed to Java application server
     Web Root: v:\inetpub\testFlex
     Root URL: http://myDevServerIP/
     ColdFusion Was folder: v:\CF9\JRun4\servers\testFlex\cfusion.ear\cfusion.war
My question is now when I'm ready to deploy to my production machine and load the app onto a tablet or other computer, obviously the Root URL will be different something like http://myLiveURL.com. Is this the only thing I change? Do I even change it here or is there some other location? Any other things I need to change?
Thanks!
Your help is much appreciated!

All the paths to CFCs are the same in my live production site. Can you be more specific as to what you mean by "RemoteClass aliases in your AS Classes and CFCs (if any) are correct."? How will the app know that the CFC is on http://myLiveSite.com instead of http://myDevSite.com? The only line of code that I have noticed that points to a URL is the endpoint in a file called _Super_XXX.as. And at the top of that file it says that the file is not meant for editting.
To clarify...I see your app/code all exists on a server access via a web browser so I can understand that everything still works when deployed. Mine is a mobile app so when I am developing and testing on my local computer the URL points to my local development machine. However when I deploy it to a mobile device like a tablet and run the app, it needs to be able to access a cfc on a remote server via a different URL ie. my http://myLiveSite.com/myCFC.cfc instead of http://localhost/myCFC.cfc
Thanks for your help! I will now take a look at your thread.
Message was edited by: ace0215

Application Server 10.1.3.10 + Enclipse. Page cannot be found.

Hello, i am running the application Server 10.1.3.10 and use Eclipse as an IDE.
Creating projects through Eclipse and publish them on Tomcat works fine.
Things start to go wrong when Eclipse is combined with Oracle AS to publish even a simple jsp page.
After creating a dynamic web project and trying to run a jsp page on the Oracle server i get following warning in the logs.
_10/03/02 13:42:29 log4j:WARN No appenders could be found for logger (wsif)._
_10/03/02 13:42:29 log4j:WARN Please initialize the log4j system properly._
_10/03/02 13:42:29 Warning: Unable to set up connection factory for a resource adapter in esb-dt: Error creating a ResourceAdapter implementation class. Error creating a JavaBean of class 'oracle.tip.esb.server.bootstrap.DesignTimeResourceAdapter: javax.resource.spi.ResourceAdapterInternalException: java.lang.RuntimeException: failed to get ESB_HOME: java.lang.NullPointerException_
_10/03/02 13:42:29 Warning: Unable to set up connection factory for a resource adapter in esb-rt: Error creating a ResourceAdapter implementation class. Error creating a JavaBean of class 'oracle.tip.esb.server.bootstrap.RuntimeResourceAdapter: javax.resource.spi.ResourceAdapterInternalException: java.lang.RuntimeException: failed to get ESB_HOME: java.lang.NullPointerException_
10/03/02 13:42:35 Confluent Config: Loading configuration file config.xml
10/03/02 13:42:35 Confluent Config: "${config.path}" is resolved to "config.properties"
10/03/02 13:42:35 Confluent Config: "${gateway.default.config.path}" is resolved to "gateway-config-installer.properties;gateway-config-common.properties"
10/03/02 13:42:35 Confluent Config: Loading property file config.properties
10/03/02 13:42:35 Confluent Config: Loading property file gateway-config-installer.properties
10/03/02 13:42:35 Confluent Config: Loading property file gateway-config-common.properties
10/03/02 13:42:35 Confluent Config: Loading configuration file config.xml
10/03/02 13:42:35 Confluent Config: "${config.path}" is resolved to "config.properties"
10/03/02 13:42:35 Confluent Config: "${gateway.default.config.path}" is resolved to "gateway-config-installer.properties;gateway-config-common.properties"
10/03/02 13:42:35 Confluent Config: Loading property file config.properties
10/03/02 13:42:35 Confluent Config: Loading property file gateway-config-installer.properties
10/03/02 13:42:35 Confluent Config: Loading property file gateway-config-common.properties
10/03/02 13:42:35
ConnectionPoolManager gateway.foundationservice intialized with url=jdbc:polite4@localhost:1531:orawsm driver=oracle.lite.poljdbc.POLJDBCDriver user=system maxConn=5
10/03/02 13:42:35 Gateway component started
10/03/02 13:42:36 Confluent Config: Loading configuration file config.xml
10/03/02 13:42:36 Confluent Config: "${config.path}" is resolved to "config.properties"
10/03/02 13:42:36 Confluent Config: "${policymanager.default.config.path}" is resolved to "policymanager-config-installer.properties;policymanager-config-common.properties"
10/03/02 13:42:36 Confluent Config: Loading property file config.properties
10/03/02 13:42:36 Confluent Config: Loading property file policymanager-config-installer.properties
10/03/02 13:42:36 Confluent Config: Loading property file policymanager-config-common.properties
10/03/02 13:42:36
ConnectionPoolManager PolicyRepository intialized with url=jdbc:polite4@localhost:1531:orawsm driver=oracle.lite.poljdbc.POLJDBCDriver user=system maxConn=5
10/03/02 13:42:36
ConnectionPoolManager ComponentRepository intialized with url=jdbc:polite4@localhost:1531:orawsm driver=oracle.lite.poljdbc.POLJDBCDriver user=system maxConn=5
10/03/02 13:42:36 Policy Manager component started
10/03/02 13:42:36 Confluent Config: Loading configuration file config.xml
10/03/02 13:42:36 Confluent Config: "${config.path}" is resolved to "config.properties"
10/03/02 13:42:36 Confluent Config: "${ui.default.config.path}" is resolved to "ui-config installer.properties;ui-config-common.properties"
10/03/02 13:42:36 Confluent Config: Loading property file config.properties
10/03/02 13:42:36 Confluent Config: Loading property file ui-config-installer.properties
10/03/02 13:42:36 Confluent Config: Loading property file ui-config-common.properties
10/03/02 13:42:36 Authentication Provider is:com.cfluent.accessprovider.sampledb.LocalDBAuthProvider
10/03/02 13:42:36
ConnectionPoolManager Component Repository Pool intialized with url=jdbc:polite4@localhost:1531:orawsm driver=oracle.lite.poljdbc.POLJDBCDriver user=system maxConn=5
10/03/02 13:42:36
ConnectionPoolManager UI Pool intialized with url=jdbc:polite4@localhost:1531:orawsm driver=oracle.lite.poljdbc.POLJDBCDriver user=system maxConn=5
10/03/02 13:42:36 Confluent UI component started
10/03/02 13:42:36 Corda Servlet Environment Initialized
10/03/02 13:42:39
Corda Server (PopChart) Version 6.0.597
PopChart: Valid Key.
OptiMap: No key entered, or key invalid.
Highwire: No key entered, or key invalid.
Cluster: No key entered, or key invalid.
10/03/02 13:42:39 Copyright 1997 - 2004, Corda Technologies, Inc. (www.corda.com) Protected by U.S. Patent 5,933,830. Other patents pending.
10/03/02 13:42:39
10/03/02 13:42:39 server_root: C:/oracle/Application_Server/owsm/lib/corda
10/03/02 13:42:39 chart_root: chart_root
10/03/02 13:42:39 Password is Enabled, Required for Save
10/03/02 13:42:39 Maximum Threads: 64
10/03/02 13:42:39 Default Image Type is: Flash
10/03/02 13:42:39 Auto Detect PNG Support. Compression Mode: DEFAULT
10/03/02 13:42:39
10/03/02 13:42:41 Confluent Config: Loading configuration file config.xml
10/03/02 13:42:41 Confluent Config: "${config.path}" is resolved to "config.properties"
10/03/02 13:42:41 Confluent Config: "${monitor.default.config.path}" is resolved to "monitor-config-installer.properties;monitor-config-common.properties"
10/03/02 13:42:41 Confluent Config: Loading property file config.properties
10/03/02 13:42:41 Confluent Config: Loading property file monitor-config-installer.properties
10/03/02 13:42:41 Confluent Config: Loading property file monitor-config-common.properties
10/03/02 13:42:44 Rmi Registry is started on port 3118
10/03/02 13:42:44 Confluent Monitor component started
10/03/02 13:42:44 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
I have looked for those warnings and found that those warnings can be ignored. Then i get a confirmation
that "Build was successful"
Buildfile: C:\Program Files\Eclipse\eclipse\plugins\org.eclipse.jst.server.generic.oc4j_1.5.206.v20090812\buildfiles\oracle.10.1.3.xml
check.skip.web.deploy:
deploy.j2ee.web:
BUILD SUCCESSFUL
Total time: 625 milliseconds
The point is that on my IDE (Eclipse the page is not being displayed getting an error "The webpage cannot be found" .
The only way i could publish the jsp is to copy it to the APPLICATIONSERVER_HOME\j2ee\home\default-web-app
and access it through http://localhost:8888/projectname/foo.jsp
What could be wrong?
Edited by: user12711529 on Mar 2, 2010 6:39 AM

If you have deployed the both applications to the same OC4J instance, then you can't do it.
If you have deployed the two applications to different OC4J instance, you could edit the config file under j2ee/home/config directory - default-web-site.xml.

SSIS is not running in 64 bit production server - Error Class cannot be found while running from c# web application

Full error message:
An Integration Services class cannot be found. Make sure that Integration Services is correctly installed on the computer that is running the application. Also, make sure that the 64-bit version of Integration Services is installed if you are running a 64-bit
application
I have developed SSIS package in my development machine where the OS is 64 bit and sql server 2012 is installed.
The package has excel source and oledb destination. Excel files can be both .xls and .xlsx format. Since i want to run both xls and xlsx format i have installed
32 bit Microsoft Acess database engine form the below link, then both xls and xlsx format worked.
.xls - 32 bit
.xlsx - 32 bit and 64 bit is available. So in common i have to run it in 32 bit.
I have set Run64BitRuntime to False and ran package. it is working fine. I cannot set Run64BitRuntime to True and run the packages. Because i have office products installed on my machine which is 32 bit. if try to install 64 bit Microsoft Acess
database engine redistributable pacakage from below link , it is throwing error saying that, already office 32 bit product is installed so uninstall 32 bit product and install 64 bit.
Excel connection string is Ace database engine only. everything works fine.
microsoftcom/en-us/download/details.aspx?id=13255
Now i am trying to invoke package from c# code by using Microsoft.SqlServer.ManagedDTS.dll and it is also working fine in my dev machine.
When i deploy the web application in production am getting the error while invoking package. the full error message is posted in 1st line of this thread.
Then i tried to execute the package in production server by using dtexec utility, it is working fine. I tried both 32 bit and 64 bit dtexec utility by going to specific path (program files(x86) and Program files) via command prompt.
It is all working fine. So the error coming when i invoke from web application. My guess is ManagedDTS causing problem.
Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll
or is it because of any other problem. i have checked below links, still problem not resolved.
social.msdn.microsoftcom/Forums/sqlserver/en-US/491384d2-02f7-4178-a1c3-bcbd58e57fce/an-integration-services-class-cannot-be-found-make-sure-that-integration-services-is-correctly?forum=sqlintegrationservices
forums.aspnet/t/1990417.aspx?Issue+deploying+SSIS+Package+in+production+web+server

1) "I have set Run64BitRuntime to False and ran package" -> this is not valid outside of your development environment, it is made for simulation purposes as all the dev tools are 32 Bit
2) "Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll " is basically SSIS. It is quite possibly the culprit. I am inclined to think you attempt to run the package where there no SSIS installed.
Arthur
MyBlog
Twitter

Server Error in '/' Application - The resource cannot be found

Using VS 2008 with Framework 3.5, I built a web-service that runs perfectly on the development PC. When I build and run the web service, it runs in a virtual port as "ASP.Net Development Server Port 49259". All the methods will
invoke no problem. However, if I try bring up this web-service asmx page on another PC or the mobile app that is cradled to the development PC via USB, I get: Server Error in '/' Application. The resource cannot be found. HTTP 404...
This app ran just fine back in October13 but I opened for further development over the weekend and I cannot work because of this. I have updated PC and VS with latest updates (problem before & after updates). Using 3.5 because I am using
Windows Mobile 5.0 Clients. I have searched the forum universe for the solution and have found many people with this error but with other platforms.
I am using the DefaultApplicationPool and I made sure that the local security has READ access on the web service file folders. I hope this is something simple that I am missing.
And help - grateful!

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
If you are working with ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET
WCF, ASMX and other Web Services forum for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its nam

When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Admin/Index2.aspx"
Any ideas???

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Multiple application pools for ColdFusion possible in the same IIS website?

I would like to set up a single website with CFM11 under IIS8.5
In this website there are several CFM applications, each under a different "Application" subfolder. For security purposes, monitoring and separate maintenance shutdowns per application, these would all need their own "application pool".
However, this means that these applications should run under a different application pool than their website root node. In IIS this causes a 403.18 exception:
HTTP Error 403.18 - Forbidden
The specified request cannot be processed in the application pool that is configured for this resource on the Web server.
Most likely causes:
•An ISAPI filter or custom module changed the URL to run in a different application pool than the original URL.
•An ISAPI extension (or custom module) used ExecuteURL (or ExecuteRequest) to run in a different application pool than the original URL.
•You have a custom error page that is located in one application pool but is referenced by a Web site in another application pool. When the URL is processed, it is determined by IIS that that it should have been processed in the first application pool, not the other pool.
•The Web site has multiple applications configured. The application this request is configured to run in is set to run in an application pool that does not exist.
All works fine if the "applications" in the subfolders run under the same application pool as the website root. However that is not my preferred setup... The behaviour is consistent over all CFM-applications that I deploy, no matter how simple they are...
Two questions:
- is coldfusion actually looking to "higher" folders than I expect it to? (and can that be avoided)
- any hints or experiences on how to avoid / solve this issue?

Here are the steps you need to follow:
When you create connector for your ColdFusion 11 website, you get the “Jakarta” as virtual directory added under your website in IIS. If you don't then add 'jakarta' as virtual directory in your website.
You need to right click on “Jakarta” folder and click on “Convert to Application”.
Select the new Application Pool of the Application (say Test) added under website (CF 11)
Click OK. Restart IIS.
NOTE : You need not to restart IIS as well however if you still face the issue after following the above steps then try to restart IIS.
HTH
Thanks
VJ

What is the latest version of SQL Server which ColdFusion 7 supports?

What is the latest version of SQL Server which ColdFusion 7 supports? For example can Cold Fusion 7 connect to SQL Server 2012 or 2008 without any problem? Thanks

First things first, I would advise you to apply the upgrades, if you haven't yet done so. I remember Coldfusion MX7 to be quite buggy. We could not wait to apply the upgrades and hotfixes. Version MX7.0.2 turned out to be the lasting upgrade. We used MySQL, however, not SQL Server.
You can get the information you want from Adobe Support. But you can think it through yourself. The way I think about it is as follows.
Coldfusion is an application that includes database functionality. I may therefore assume that Coldusion would be backwardly compatible in its support of database server versions. In other words, a new version of Coldfusion, say 9 or 10, would work with an older database server like SQL Server 2005.
However, I would not expect a previous version of Coldfusion, say MX7, to be compatible with newer database server versions like SQL Server 2008 and SQL Server 2012. Even if someone told me they were compatible, I would still expect such a set-up to be an accident waiting to happen.

Error while deploying ADF application to a standalone weblogic server

I am using Jdeveloper 11.1.1.6.0, and I am trying to deploy my application to a standalone server running on a Unix box and I get the following error message:
[04:12:44 PM] ---- Deployment started. ----
[04:12:44 PM] Target platform is (Weblogic 10.3).
[04:13:00 PM] Retrieving existing application information
[04:13:01 PM] Running dependency analysis...
[04:13:01 PM] Building...
[04:13:05 PM] Deploying profile...
[04:13:09 PM] Wrote Web Application Module to C:\JDeveloper\PortingAppln\ViewController\deploy\ADF1.war
[04:13:13 PM] Deploying Application...
[04:20:19 PM] [Deployer:149191]Operation 'deploy' on application 'ADF1' is initializing on 'ADF1'
[04:20:45 PM] Weblogic Server Exception: weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
[04:20:45 PM] See server logs or server console for more details.
[04:20:45 PM] weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
[04:20:46 PM] #### Deployment incomplete. ####
[04:20:46 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Can someone help me with this problem.
Thanks,
Srini.

Well, how did you do?
I am having a similar problem.
1) Installed WLS 10.3.5 on a Linux machine
2) Installed ADF runtime libraries (ofm_appdev_generic_11.1.1.5.0_disk1_1of1.zip)
3) I can see at deployments
- adf.oracle.businesseditor(1.0,11.1.1.2.0)
- adf.oracle.domain(1.0,11.1.1.2.0)
- adf.oracle.domain.webapp(1.0,11.1.1.2.0)
- DMS Application (11.1.1.1.0)
- em
- emai
- emas
- emcore
- FMW Welcome Page Application (11.1.0.0.0)
- jsf(1.2,1.2.9.0)
I created from scratch a new Fusion Web app. It just has 1 ADF read-only table based on the HR.COUNTRIES table. It runs perfectly on the integrated WL.
I cannot deploy it to my standalone WLS. The error:
[02:01:37 PM] Unable to determine the target platform from the Profile. Using default
[02:01:37 PM] ---- Deployment started. ----
[02:01:37 PM] Target platform is (Weblogic 10.3).
[02:01:37 PM] Retrieving existing application information
[02:01:37 PM] Running dependency analysis...
[02:01:37 PM] Building...
[02:01:37 PM] Deploying 2 profiles...
[02:01:37 PM] Wrote Web Application Module to C:\JDeveloper\mywork\TesteAPP\ViewController\deploy\TesteAPP_ViewController_webapp.war
[02:01:37 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\TesteAPP\deploy\TesteAPP_Project1_TesteAPP.ear
[02:01:37 PM] Deploying Application...
[02:01:39 PM] [Deployer:149191]Operation 'deploy' on application 'TesteAPP_Project1_TesteAPP' is initializing on 'ADFServer'
[02:01:39 PM] [Deployer:149193]Operation 'deploy' on application 'TesteAPP_Project1_TesteAPP' has failed on 'ADFServer'
[02:01:39 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application TesteAPP_Project1_TesteAPP on ADFServer.: Failed to load webapp: 'testeADF'.
[02:01:39 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'testeADF'
[02:01:39 PM] Caused by: weblogic.management.DeploymentException: Error: Unresolved Webapp Library references for "ServletContext@1021039597[app:TesteAPP_Project1_TesteAPP module:testeADF path:/testeADF spec-version:2.5]", defined in weblogic.xml [Extension-Name: jsf, Specification-Version: 2, exact-match: false]
[02:01:39 PM] See server logs or server console for more details.
[02:01:39 PM] weblogic.application.ModuleException: Failed to load webapp: 'testeADF'
[02:01:39 PM] Deployment cancelled.
[02:01:39 PM] ---- Deployment incomplete ----.
[02:01:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
I am using JDeveloper 11.1.2.1.0
What am I missing here? It must be something obvious, but I am stuck.
Thanks in advance.

Sharepoint FBA web application error: Server Error in '/' Application. when login to the web application

Hello Team,
I have configured FBA in SharePoint 2010. After the FBA i can get the SQL users using people picker and added users as a site collection admin.
When i tried to access the site, it shows login page and i have given user name and password then pressed signin button, it's try to redirect the another page and showing below error,
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "RemoteOnly". To enable the details to be viewable on remote machines, please set "mode" to "Off".

<configuration>
<system.web>
<customErrors mode="RemoteOnly"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="On" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
"An exception occurred when trying to issue security token: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.19 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'..
I checked sharepoint logs and didn't see any log. but i can see below error logged in Event viewer application logs,
I tried changing all customErrors mode and still same error.
Kindly help me on this, how to resolve the issue.
Thanks in advance.
JP

Hi,
According to your description, my understanding is that the error occurred when you accessed SharePoint site through form based authentication.
How did you configure the form based authentication?
Here is a link about the steps required to configure FBA in SharePoint 2010 for your reference, and check the steps to see if there anything wrong in your configuration:
http://www.codeproject.com/Articles/352841/How-to-Configure-Form-Based-Authentication-FBA-in
Through the common error message, we cannot find what exactly caused the error.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the?forum=sharepointgeneralprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Application view creation in WLI SERVER

          Hi folks,
          w,r.to my previous mail,Iam getting the following errors while i try to login
          to the Application view console in WLI
          Server.pl. anyone try to help me to sort this problem.Iam new to WLI Server.
          <Cannot startup connection pool "wliPool" java.sql.SQLException: No suitable driver>
          <Jun 13, 2003 5:02:45 PM IST> <Error> <JDBC> <001059> <Error during Data Source
          creation: weblogic.common.ResourceException: DataSource(WLAI_DataSource) can't
          be created with non-existent Pool (connection or multi) (wliPool)
          at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
          at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:260)
          at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
          at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
          <Jun 13, 2003 5:02:49 PM IST> <Alert> <JMS> <040052> <JMSServer "WLIJMSServer",
          store failed to open, java.io.IOException: JMS JDBC store, connection pool = <wliPool>,
          prefix = <myserver___PBPUBLIC>: connection pool does not exist.
          java.io.IOException: JMS JDBC store, connection pool = <wliPool>, prefix = <myserver___PBPUBLIC>:
          connection pool does not exist
          >
          <Jun 13, 2003 5:02:52 PM IST> <Error> <Connector> <190024> << Calumma LDAP JCA
          Resource Adapter_LdapConnector > Error making initial connections for pool. Reason:
          CreateManagedConnection Error: 192.168.66.144:389>
          <Jun 13, 2003 5:03:04 PM IST> <Error> <AI> <000000> <Failed to initialize the
          WLI-Application Integration enterprise application due to an exception while initializing
          JMS resources.
          com.bea.wlai.JMSResourceException: Failed to initialize the WLAI asynchronous
          service request JMS Queue 'WLAI_ASYNC_REQUEST_QUEUE' bound at JNDI context 'com.bea.wlai.ASYNC_REQUEST_QUEUE'.
          Root Cause: javax.naming.NameNotFoundException: Unable to resolve 'com.bea.wlai.ASYNC_REQUEST_QUEUE'
          Resolved: 'com.bea.wlai' Unresolved:'ASYNC_REQUEST_QUEUE' ; remaining name 'ASYNC_REQUEST_QUEUE'
          at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
          at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:263)
          at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:230)
          at weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(Unknown Source)
          at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:337)
          at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:332)
          at javax.naming.InitialContext.lookup(InitialContext.java:347)
          at com.bea.wlai.JMSHelper.initQueue(Unknown Source)
          <Jun 13, 2003 5:03:05 PM IST> <Critical> <WebLogicServer> <000286> <Failed to
          invoke startup class "LwcStartup", java.lang.ClassNotFoundException: com.bea.lwclient.Startup>
          <Jun 13, 2003 5:03:07 PM IST> <Notice> <Management> <141052> <Application Poller
          started for development server.>
          <Jun 13, 2003 5:03:11 PM IST> <Error> <HTTP> <101165> <Could not load user defined
          filter: com.bea.b2b.transport.http.TransportServletFilter
          java.lang.ClassNotFoundException: com.bea.b2b.transport.http.TransportServletFilter
          at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:179)
          at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:62)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
          at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:41)
          at weblogic.servlet.internal.WebAppServletContext.loadClass(WebAppServletContext.java:4714)
          at weblogic.servlet.internal.WebAppServletContext.registerFilter(WebAppServletContext.java:2446)
          at weblogic.servlet.internal.WebAppServletContext.initFilters(WebAppServletContext.java:2433)
          at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:2703)
          at weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:563)
          at weblogic.servlet.internal.WebService.preloadResources(WebService.java:476)
          at weblogic.t3.srvr.ServletInitRunner$1.run(ServletInitRunner.java:50)
          at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
          at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:46)
          at java.lang.Thread.run(Thread.java:536)
          >
          <Jun 13, 2003 5:03:11 PM IST> <Error> <socket> <000433> <Unable to load performance
          pack, using Java I/O instead.
          Please ensure that libmuxer library is in :'/home/tsuresh/j2sdk1.4.0/jre/lib/i386/client:/home/tsuresh/j2sdk1.4.0/jre/lib/i386:/home/tsuresh/j2sdk1.4.0/jre/../lib/i386'
          java.lang.UnsatisfiedLinkError: no muxer in java.library.path
          java.lang.UnsatisfiedLinkError: no muxer in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1410)
          at java.lang.Runtime.loadLibrary0(Runtime.java:772)
          at java.lang.System.loadLibrary(System.java:832)
          at weblogic.socket.PosixSocketMuxer.<init>(PosixSocketMuxer.java:180)
          at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
          at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
          at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
          at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
          at java.lang.Class.newInstance0(Class.java:296)
          at java.lang.Class.newInstance(Class.java:249)
          at weblogic.socket.SocketMuxer.makeTheMuxer(SocketMuxer.java:54)
          at weblogic.socket.SocketMuxer.getMuxer(SocketMuxer.java:37)
          at weblogic.t3.srvr.ListenThread.run(ListenThread.java:205)
          >
          <Jun 13, 2003 5:03:12 PM IST> <Notice> <Management> <141030> <Starting discovery
          of Managed Server... This feature is on by default, you may turn this off by passing
          -Dweblogic.management.discover=false>
          <Jun 13, 2003 5:03:12 PM IST> <Notice> <WebLogicServer> <000354> <Thread "ListenThread.Default"
          listening on port 7010>
          <Jun 13, 2003 5:03:12 PM IST> <Notice> <WebLogicServer> <000331> <Started WebLogic
          Admin Server "myserver" for domain "ldap_adapterdomain" running in Development
          Mode>
          <Jun 13, 2003 5:03:15 PM IST> <Notice> <WebLogicServer> <000365> <Server state
          changed to RUNNING>
          <Jun 13, 2003 5:03:15 PM IST> <Notice> <WebLogicServer> <000360> <Server started
          in RUNNING mode>
          <Jun 13, 2003 5:04:18 PM IST> <Error> <AI> <000000> <Could not create NamespacePersistence
          Object.
          -------- Begin level 0 Exception Stack Trace --------
          com.bea.wlai.repository.PersistenceException: Failed to initialize WLI repository
          access layer for the Application Integration subcomponent because the JDBC data
          source was not found at JNDI name WLAI_DataSource due to Unable to resolve 'WLAI_DataSource'
          Resolved: '' Unresolved:'WLAI_DataSource'
          at com.bea.wlai.repository.NamespacePersistence.initDataSource(Unknown
          Source)
          at com.bea.wlai.repository.NamespacePersistence.<init>(Unknown Source)
          at com.bea.wlai.NamespaceManagerImpl.<init>(Unknown Source)
          at com.bea.wlai.NamespaceManagerImpl.getInstance(Unknown Source)
          at com.bea.wlai.client.bean.NamespaceManagerBean.establishImpl(Unknown
          Source)
          at com.bea.wlai.client.bean.NamespaceManagerBean.ejbCreate(Unknown Source)
          at com.bea.wlai.client.bean.NamespaceManagerBean_k6j0cj_Impl.ejbCreate(NamespaceManagerBean_k6j0cj_Impl.java:122)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:324)
          at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
          at weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:101)
          at weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:142)
          at weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:127)
          at weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java:61)
          at com.bea.wlai.client.bean.NamespaceManagerBean_k6j0cj_EOImpl.getRootNamespace(NamespaceManagerBean_k6j0cj_EOImpl.java:83)
          at jsp_servlet.__nshierarchy._jspService(__nshierarchy.java:115)
          at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
          at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
          at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:543)
          at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:369)
          at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:136)
          at jsp_servlet.__display._jspService(__display.java:511)
          at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
          at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
          rgds
          Suresh.K


1) http://commerce.bea.com/showproduct.jsp?family=WLP&major=8.1&minor=4
          2)Make sure you add your JDBC drivers to the beginning of CLASSPATH in either setDomainenv.cmd or setEnv.cmd
          3)What really helped was BEA support and playing with BEA's JDBC example that shows how to create and deploy and use a data source.
          http://dev2dev.bea.com/codelibrary/code/examples_jdbc.jsp

ColdFusion 11 Application Server 3284 | ColdFusion 11 Application Server cannot be found...

Similar Messages

Maybe you are looking for