Why can not backup the archived log when I perform intensive insertions

I use RMAN to backup archivedlog, while I perform intensive insertion operation. I always get the message:
ORA-00235: controlfile fiexed table inconsistent due to concurrent update.
any idea please!
My logfile size is big enough.

May be you need more number of redo smaller logs, i.e., smaller more redo-logs rather than bigger less # of redo logs. e.g., if you have two redo log group each 10M, make 4 redo log groups each 5M; which will cause more frequent check point..just a suggestion!
Good Luck.

Similar Messages

My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

To change the iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

Step by step, how did you arrive at seeing this agreement?

Why can not open the file

why can not open the file

On which OS are you working?
Did you see issue in opening pdf in browser or in Application?
You can try upgarding to latest version of Reader via link
http://get.adobe.com/reader/enterprise/

Why can not scp the spfile to another host?

Why can not scp the spfile to another host?
The hostp is physically connect with hosts with a router. Both are RHEL5.0 OS. I copied some files from hostp to hosts successfully a few days ago. But it not work today. The SSH is disabled on both hosts.
[oracle@hostp db10g] $ cd $ORACLE_HOME/dbs
[oracle@hostp dbs] $ ls
hc_db10g.dat init.ora orapwrcatalog spfilercatalog.ora
hc_rcatalog.dat lkDB10G snapcf_db10g.f
initdb10g.ora lkRCATALOG snapcf_rcatalog.f
initdw.ora orapwdb10g spfiledb10g.ora
[oracle@hostp dbs] $ scp spfiledb10g.ora hosts:/u01/app/oracle/product/10.2.0/db_1/dbs/
ssh: connect to host hosts port 22: No route to host
lost connection

I ping the hostp from the hosts, it is reachable; But I ping hosts from the hostp, it is unreachable. The follows are some information for diagnosys.
[root@hostp oracle]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
[oracle@hostp ~]$ ping hosts
PING hosts (192.168.0.3) 56(84) bytes of data.
CFrom 192.168.0.107 icmp_seq=2 Destination Host Unreachable
From 192.168.0.107 icmp_seq=3 Destination Host Unreachable
From 192.168.0.107 icmp_seq=4 Destination Host Unreachable
--- hosts ping statistics ---
9 packets transmitted, 0 received, +6 errors, 100% packet loss, time 7997ms, pipe 3
[oracle@hostp ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.0.2 hostp
192.168.0.3 hosts
[oracle@hostp ~]$ ping hostp
PING hostp (192.168.0.2) 56(84) bytes of data.
64 bytes from hostp (192.168.0.2): icmp_seq=1 ttl=64 time=0.394 ms
64 bytes from hostp (192.168.0.2): icmp_seq=2 ttl=64 time=0.194 ms
64 bytes from hostp (192.168.0.2): icmp_seq=3 ttl=64 time=0.190 ms
--- hostp ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.190/0.259/0.394/0.096 ms
[oracle@hostp ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.0.3 hosts
192.168.0.2 hostp

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Why can not catch the standard BACK event in ALV's USER_COMMAND event,

Hi expert, why i can not catch the standard BACK event in ALV's USER_COMMAND event,
Code:
DATA G_CON_UC_FORM   TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = SY-REPID
      I_CALLBACK_TOP_OF_PAGE = G_CON_FORM
      I_CALLBACK_USER_COMMAND = G_CON_UC_FORM
      IT_FIELDCAT             = G_TAB_FIELDCAT
      IT_SORT                 = G_TAB_SORT_INF
      I_SAVE                  = G_CON_U
*<<<Liang
    IT_EVENTS               = G_TAB_ALV_EVENTS
*<<<Liang
    TABLES
      T_OUTTAB                = G_TAB_OUTPUT_DATA
    EXCEPTIONS
      PROGRAM_ERROR           = 1
      OTHERS                  = 2.
*&      Form F_USER_COMMAND
      ALV USER COMMAND processing
FORM F_USER_COMMAND .
IF SY-UCOMM = '&FO3'.
    LEAVE TO SCREEN 0.
ENDIF.
ENDFORM.                    " F_USER_COMMAND
When I set breakpoint on this subrouting ,and try to click stardard BACK or CANCEL button, the callback form do not run, but if double click one of line of alv report, the callback form works well,
so why??

hi
good
check this report and change your code accordingly.
THESE LINES ARE FOR THE MAIN PROGRAM ***
SAP V40B ***
REPORT Z_PICK_LIST .
TABLES: RESB.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS: S_WERKS FOR RESB-WERKS," Plant
                S_AUFNR FOR RESB-AUFNR," Order number
                S_BDTER FOR RESB-BDTER." Req. date
SELECTION-SCREEN END OF BLOCK BL1.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
DATA: BEGIN OF OUT OCCURS 10,
        AUFNR LIKE RESB-AUFNR,         " Order number
        MATNR LIKE RESB-MATNR,         " Material
        BDMNG LIKE RESB-BDMNG,         " Requirements in UM
        MEINS LIKE RESB-MEINS,         " Unit of Measure (UM)
        ERFMG LIKE RESB-ERFMG,         " Requirements in UE
        ERFME LIKE RESB-ERFME,         " Unit of Entry (UE)
        MAKTX LIKE MAKT-MAKTX,         " Mat. description
      END OF OUT.
INCLUDE Z_ALV_VARIABLES.
INITIALIZATION.
REPNAME = SY-REPID.
PERFORM INITIALIZE_FIELDCAT USING FIELDTAB[].
PERFORM BUILD_EVENTTAB USING EVENTS[].
PERFORM BUILD_COMMENT USING HEADING[].
PERFORM INITIALIZE_VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
START-OF-SELECTION.
PERFORM GET_ORDERS.
PERFORM GET_MATERIAL_DESCRIPTION.
END-OF-SELECTION.
PERFORM BUILD_LAYOUT USING LAYOUT.
PERFORM BUILD_PRINT USING PRINTS.
PERFORM WRITE_USING_ALV.
      FORM INITIALIZE_FIELDCAT                               *
--> P_TAB                                                         *
FORM INITIALIZE_FIELDCAT USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.
ENDFORM.                               " INITIALIZE_FIELDCAT
*&      Form GET_ORDERS
      text
FORM GET_ORDERS.
SELECT AUFNR MATNR BDMNG MEINS ERFMG ERFME
         FROM RESB
         APPENDING TABLE OUT
         WHERE XLOEK EQ SPACE          " deletion indicator
         AND   XWAOK EQ 'X'            " goods movement indicator
         AND   WERKS IN S_WERKS        " plant
         AND   BDTER IN S_BDTER        " req. date
         AND   AUFNR IN S_AUFNR.       " pr. order
ENDFORM.                               " GET_ORDERS
*&      Form GET_MATERIAL_DESCRIPTION
      text
FORM GET_MATERIAL_DESCRIPTION.
SORT OUT BY MATNR.
LOOP AT OUT.
    SELECT SINGLE MAKTX
           INTO OUT-MAKTX
           FROM MAKT
           WHERE MATNR EQ OUT-MATNR
           AND   SPRAS EQ 'EN'.
    MODIFY OUT.
ENDLOOP.
SORT OUT BY AUFNR MATNR.
ENDFORM.                               " GET_MATERIAL_DESCRIPTION
      FORM TOP_OF_PAGE                                              *
FORM TOP_OF_PAGE.
DATA: L_POS TYPE P.
first line
WRITE:/ TEXT-001.                    " Plant:
IF S_WERKS-HIGH NE SPACE.
    WRITE: S_WERKS-LOW, TEXT-TO1, S_WERKS-HIGH.
ELSEIF S_WERKS-LOW NE SPACE.
    LOOP AT S_WERKS.
      WRITE: S_WERKS-LOW.
    ENDLOOP.
ELSEIF S_WERKS-LOW EQ SPACE.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = ( SY-LINSZ DIV 2 ) - ( STRLEN( TEXT-TIT ) DIV 2 ).
POSITION L_POS. WRITE: TEXT-TIT.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-011, SY-UNAME RIGHT-JUSTIFIED. " User:
second line
WRITE:/ TEXT-002.                    " Order:
IF S_AUFNR-HIGH NE SPACE.
    WRITE: S_AUFNR-LOW, TEXT-TO1, S_AUFNR-HIGH.
ELSEIF S_AUFNR-LOW NE SPACE.
    LOOP AT S_AUFNR.
      WRITE: S_AUFNR-LOW.
    ENDLOOP.
ELSEIF S_AUFNR-LOW EQ SPACE.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-012,SY-DATUM.      " Date:
third line
WRITE:/ TEXT-003.                    " Req. Date:
IF S_BDTER-HIGH(1) NE '0'.
    WRITE: S_BDTER-LOW, TEXT-TO1, S_BDTER-HIGH.
ELSEIF S_BDTER-LOW(1) NE '0'.
    LOOP AT S_BDTER.
      WRITE: S_BDTER-LOW.
    ENDLOOP.
ELSEIF S_BDTER-LOW(1) EQ '0'.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-013, SY-PAGNO.   " Page:
ENDFORM.                               " TOP_OF_PAGE
      FORM END_OF_LIST                                              *
FORM END_OF_LIST.
DATA: L_POS TYPE P.
ULINE.
WRITE:/ '|', TEXT-021.      " Delivered by:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-031.            " Received by:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
WRITE:/ '|', TEXT-012.      " Date:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-012.            " Date:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
ENDFORM.                               " END_OF_LIST
*&      Form WRITE_USING_ALV
      text
FORM WRITE_USING_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME     = REPNAME
            I_INTERNAL_TABNAME = 'OUT'
            I_INCLNAME         = REPNAME
       CHANGING
            CT_FIELDCAT        = FIELDTAB.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = REPNAME
           i_callback_pf_status_set = 'PF_STATUS_SET'
           i_callback_user_command = 'USER_COMMAND'
            I_STRUCTURE_NAME         = 'OUT'
            IS_LAYOUT                = LAYOUT
            IT_FIELDCAT              = FIELDTAB
            I_DEFAULT                = 'A'
            I_SAVE                   = G_SAVE
            IS_VARIANT               = G_VARIANT
            IT_EVENTS                = EVENTS[]
            IS_PRINT                 = PRINTS
       TABLES
            T_OUTTAB                 = OUT.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_LIST_DISPLAY'.
ENDIF.
ENDFORM.                               " WRITE_USING_ALV
THESE LINES ARE FOR THE INCLUDE ***
***INCLUDE Z_ALV_VARIABLES .
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
      HEADING TYPE SLIS_T_LISTHEADER,
      LAYOUT   TYPE SLIS_LAYOUT_ALV,
      EVENTS   TYPE SLIS_T_EVENT,
      REPNAME LIKE SY-REPID,
      F2CODE   LIKE SY-UCOMM VALUE '&ETA',
      PRINTS   TYPE SLIS_PRINT_ALV,
      TITLE(40) TYPE C,
      G_SAVE(1) TYPE C,
      G_EXIT(1) TYPE C,
      G_VARIANT LIKE DISVARIANT,
      GX_VARIANT LIKE DISVARIANT.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
           FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
           FORMNAME_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
           FORMNAME_BEFORE_LINE TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE',
           FORMNAME_AFTER_LINE TYPE SLIS_FORMNAME VALUE 'AFTER_LINE'.
      FORM MAIN_STATEMENTS                                          *
THIS IS THE CODE THAT MUST BE INSERTED IN THE MAIN PROGRAM
FORM MAIN_STATEMENTS.
Declare the parameter P_VARI wherever you want it. If you don't
want it, hide it with NO-DISPLAY, but it must exist.
parameters: p_vari like disvariant-variant. " ALV Variant
You have to add the following line after the data and parameter
declaration:
include z_alv_variables.
Then, after the data/parameter declaration, add these lines:
*initialization.
repname = sy-repid.
perform initialize_fieldcat using fieldtab[].
perform build_eventtab using events[].
perform build_comment using heading[].
perform initialize_variant.
If you are using the variable P_VARI (ALV Variant), also add this:
*at selection-screen on value-request for p_vari.
perform f4_for_variant.
*at selection-screen.
perform pai_of_selection_screen.
After the "END-OF-SELECTION" statement, add these lines:
perform build_layout using layout.
perform build_print using prints.
perform write_using_alv.
You also have to create the following forms: (you can find samples
in this program)
INITIALIZE_FIELDCAT
USER_COMMAND     (only if you are creating a STATUS)
WRITE_USING_ALV
ENDFORM.
*&      Form INITIALIZE_FIELDCAT_SAMPLE
      THIS IS A SAMPLE, DO NOT USE THIS FORM IN YOUR PROGRAM
     -->P_FIELDTAB[] text                                           *
FORM INITIALIZE_FIELDCAT_SAMPLE USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.                           " Always clear before use
CAT-TABNAME = 'I'.                   " Your internal table
CAT-REF_TABNAME = 'ZCUSTMAS'. " The data dictionary reference table
CAT-FIELDNAME = 'KUNNR'.       " Name of your field in the itable.
CAT-COL_POS   = 1.                   " Output position
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'NAME1'.             " Next field
CAT-COL_POS   = 2.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'STRAS'.             " and the next
CAT-COL_POS   = 3.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'LOEVM'.
CAT-SELTEXT_S = 'Del'.         " You can always override the descrip-
CAT-SELTEXT_M = 'Delivery'.          " tion (short, medium, large)
CAT-SELTEXT_L = 'Delivery Num'.
CAT-COL_POS   = 4.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'FKIMG'.
CAT-DO_SUM    = 'X'.                 " You want totals calculated.
CAT-NO_OUT    = 'X'.                 " and hidden.
APPEND CAT TO P_TAB.
ENDFORM.                               " INITIALIZE_FIELDCAT
*&      Form BUILD_EVENTTAB
      THIS IS THE SAME FOR ALL THE PROGRAMS
     -->P_EVENTS[] text                                             *
FORM BUILD_EVENTTAB USING P_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE = 0
       IMPORTING
            ET_EVENTS   = P_EVENTS.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_END_OF_LIST TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_BEFORE_LINE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_AFTER_LINE_OUTPUT
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_AFTER_LINE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
ENDFORM.                               " BUILD_EVENTTAB
*&      Form BUILD_COMMENT
NOT REALLY NEEDED, BUT I'LL LEAVE IT THERE, JUST IN CASE...
     -->P_HEADING[] text                                            *
FORM BUILD_COMMENT USING P_HEADING TYPE SLIS_T_LISTHEADER.
DATA: HLINE TYPE SLIS_LISTHEADER,
        TEXT(60) TYPE C,
        SEP(20) TYPE C.
CLEAR: HLINE, TEXT.
HLINE-TYP = 'H'.
write: text-101 to text+23.
HLINE-INFO = TEXT.
APPEND HLINE TO P_HEADING.
ENDFORM.                               " BUILD_COMMENT
*&      Form INITIALIZE_VARIANT
VERY IMPORTANT WHEN YOU USE VARIANTS!!!
FORM INITIALIZE_VARIANT.
G_SAVE = 'A'.
CLEAR G_VARIANT.
G_VARIANT-REPORT = REPNAME.
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            I_SAVE     = G_SAVE
       CHANGING
            CS_VARIANT = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 0.
    P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDFORM.                               " INITIALIZE_VARIANT
*&      Form PAI_OF_SELECTION_SCREEN
ALSO FOR VARIANTS
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
    MOVE G_VARIANT TO GX_VARIANT.
    MOVE P_VARI TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = G_SAVE
         CHANGING
              CS_VARIANT = GX_VARIANT
         EXCEPTIONS
              WRONG_INPUT   = 1
              NOT_FOUND     = 2
              PROGRAM_ERROR = 3.
    IF SY-SUBRC EQ 0.
      G_VARIANT = GX_VARIANT.
    ELSE.
      PERFORM INITIALIZE_VARIANT.
    ENDIF.
ELSE.
    PERFORM INITIALIZE_VARIANT.
ENDIF.
ENDFORM.                               " PAI_OF_SELECTION_SCREEN
*&      Form F4_FOR_VARIANT
      text
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            IS_VARIANT = G_VARIANT
            I_SAVE     = G_SAVE
       IMPORTING
            E_EXIT     = G_EXIT
            ES_VARIANT = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 2.
    MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF G_EXIT = SPACE.
      P_VARI = GX_VARIANT-VARIANT.
    ENDIF.
ENDIF.
ENDFORM.                               " F4_FOR_VARIANT
*&      Form BUILD_LAYOUT
STANDARD LAYOUT
     -->P_LAYOUT text                                               *
FORM BUILD_LAYOUT USING P_LAYOUT TYPE SLIS_LAYOUT_ALV.
P_LAYOUT-F2CODE       = F2CODE.
P_LAYOUT-ZEBRA        = 'X'.
p_layout-detail_popup = 'X'.
P_LAYOUT-TOTALS_TEXT = SPACE.
P_LAYOUT-SUBTOTALS_TEXT = SPACE.
ENDFORM.                               " BUILD_LAYOUT
      FORM BUILD_PRINT                                              *
STANDARD PRINT OPTIONS                                             *
--> P_PRINT                                                       *
FORM BUILD_PRINT USING P_PRINT TYPE SLIS_PRINT_ALV.
P_PRINT-NO_PRINT_LISTINFOS = 'X'.
P_PRINT-NO_PRINT_SELINFOS = ' '.
ENDFORM.                               " BUILD_PRINT
      FORM PF_STATUS_SET                                            *
NAME YOUR STATUS ALV. IF YOU NEED IT..                             *
FORM PF_STATUS_SET USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ALV' EXCLUDING EXTAB.
ENDFORM.                               " PF_STATUS_SET
      FORM USER_COMMAND_SAMPLE                                      *
--> UCOMM                                                         *
--> SELFIELD                                                      *
FORM USER_COMMAND_SAMPLE USING UCOMM    LIKE SY-UCOMM
                           SELFIELD TYPE SLIS_SELFIELD.
CASE UCOMM.
    WHEN 'MSXL'.                       " Export to Excel
     perform set_excel_export.
      CLEAR UCOMM.
    WHEN 'MM03'.
     set parameter id 'MAT' field selfield-value.
     call transaction 'MM03' and skip first screen.
      CLEAR UCOMM.
    WHEN 'BGR1'.
     perform fill_available.
     perform graph_available.
      CLEAR UCOMM.
    WHEN 'DOCU'.
     call function 'Z_HELP' exporting repname = repname.
ENDCASE.
ENDFORM.                               " USER_COMMAND
*&      Form WRITE_USING_ALV_SAMPLE
*THIS IS A SAMPLE AND MUST BE WRITTEN DIRECTLY IN THE MAIN PROGRAM
FORM WRITE_USING_ALV_SAMPLE.
YOU CAN MERGE WITH A DATA DICTIONARY TABLE USING THIS:
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
      exporting
           i_program_name     = repname
           i_internal_tabname = 'I'
           i_inclname         = repname
      changing
           ct_fieldcat        = fieldtab.
if sy-subrc <> 0.
   write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_FIELDCATALOG_MERGE'.
endif.
OR JUST DISPLAY IT USING THIS:
call function 'REUSE_ALV_LIST_DISPLAY'
      exporting
           i_callback_program       = repname
           i_callback_pf_status_set = 'PF_STATUS_SET'
           i_callback_user_command = 'USER_COMMAND'
           i_structure_name         = 'I'
           is_layout                = layout
           it_fieldcat              = fieldtab
           i_default                = 'A'
           i_save                   = g_save
           is_variant               = g_variant
           it_events                = events[]
           is_print                 = prints
      tables
           t_outtab                 = i.
if sy-subrc <> 0.
   write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_LIST_DISPLAY'.
endif.
ENDFORM.                               " WRITE_USING_ALV
thanks
mrutyun^

WHY DO I HAVE TO CLICK ON " GROUP YOUR TABS" IN ORDER TO SEE HOW MANEY TABS ARE THERE? WHY CAN NOT SEE THE TABS?

help...........
it happen, because i wanted to customize my fire fox and drag the tabs over navigation tool bar.. now i can not see the tabs unless i click on group your tabs button :( and can not change it any more

By PM
''hi John, i can not see, how many sites are open, because i do not see the tabs! i am sorry but i do not know how to explain it:( I see a window with my bookmarks -toolbar, menu bar and navigation bar, but no tabs for the sites, i am on! thank you for taking time and answering! ''
What happens when you open a new tab for instance use Keyboard shortcut Ctrl +T does that open a new tab that you can see. Please attach a screenshot of your ordinary Firefox page e.g. open on this forum. And a screenshot of the Group Your tabs view.
* [[How do I create a screenshot of my problem?]]
* [[How to make screenshots]]
I could suggest trying the Firefox reset, but that may be rather premature
* [[Reset Firefox – easily fix most problems]]

How can i see the Archive log backup contens from th tapes

hello
I am taking Archive log Backup regularly
i want ot chk my backup contents from tape through the db2 command
From DB13 it is showing successfully Completed
but for the comfirmation where and how i can see the contents of tape
Point in advance from me
Jayesh

Hello Jayesh ,
using db2tapemgr you can display the tape header DB2TAPEMGR.HEADER using
db2tapemgr SHOW TAPE HEADER <tape device>
in "contents:" field you can see , which logfiles are on tape at which position .
see
[db2tapemgr - Manage log files on tape command|http://publib.boulder.ibm.com/infocenter/db2luw/v9r5/index.jsp?topic=/com.ibm.db2.luw.admin.cmd.doc/doc/r0011704.html]
[IBM DB2 Universal Database for UNIX and Windows:New Log File Management|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50c7d3ef-5a59-2a10-a3ab-fb3b0887f479]
Best regards
dirk

How to backup the archived log after a crosscheck .

Hi all,
Here is the scenario:
My archive area got full, I moved some archived logs to another destination. My main script to backup archive log raised a error informing that some files were missing, so I issued a crosscheck archivelog all command.
I realized that I did something insane and is there any way to fix it? I mean, how could I backup the missed sequence? Because I'll need to send them to a tape and also register the files in the RMAN's catalog.
Regards and thanks in advance,
Emerson

user11983913 wrote:
Hi all,
Here is the scenario:
My archive area got full, I moved some archived logs to another destination. My main script to backup archive log raised a error informing that some files were missing, so I issued a crosscheck archivelog all command.
I realized that I did something insane and is there any way to fix it? I mean, how could I backup the missed sequence? Because I'll need to send them to a tape and also register the files in the RMAN's catalog.
Regards and thanks in advance,
EmersonHi Emerson
Use the following command to register moved archived redo logs to RMAN repository
CATALOG ARCHIVELOG '';

Why can not load the Linux System?

I want to install Linux as the second OS on my notebook.I downloaded the Fedora8 software on the C: partition and decompressed it on the C: partition too. Then I copied and decompressed the file "isolinux " on the D: partition.
I installed the software "grub4dos" and made some changes in the document: \boot\grub\menu.lst. When I restart the computer and choose the Fedora8 from the loader menu, the Linux installation process can not be started and show the follow message:"Because follow document is lost,you can not start Windows:<Winder root>\system32\hal.dll. please copy it on."
What is the reason?
Message was edited by:
frank.qian

Hi,
I suppose it caused by grub4dos utility. Could you try using WinGrub?
Regards
Terry

HT201320 why can not delete the email by my iphone5

My Email ac is the office ac
i want delete the message
but can not
why?

The received emails
it say can not drop to the trash

Why can not find the G/L document when use mr8m reverse .

Dear all,
I want to reverse a document use MR8M trans code, but the message tell me the document is not exists. but I can find the document in FB03 . why?
This document type is RE.
Please help me.

sorry ,the document is error.

Why can not reverse the single cash flow ?

Hi.
I've created loan number using t-code : fn1v.
I've posted different cash flow.
I'd like to reverse specific interest amount using t-code : fnvm.
but it didn't work.
sap pop up the message.
============================================================
Diagnosis
A planned record is preventing document 44959 in company code HPT from being reversed.
Procedure
Delete or post the planned record and continue with the reversal.
============================================================
So i deleted all plan cash flow's data registered by fn8c or fn8x.
after that it works well.
I checked it out thoroughly. I found that it is impossible to reverse when it is included plan cash flow's data registered by fn8c or fn8x
why is that? Could you explain?
thanks in advance.

Hi,
you can reverse the specific interest amount by using Tcode FNM3, provided you have not made clearing.In that case you have to reverse clearing & then use TCode FNM3.
rgds
Saurabh

I can not activate the automatic uppercase when writing a mail in the application of "mail" on my macbook pro?

Hello,
My question is, when I write a mail with Mail.app, and I make a mistake (no matter what language you use) it doesn't put the red underlines as it does with everything else(pages, safari ....). But after a point, it doesn't correct the lowercase, so I have to spend a lot of time checking to not send mails with that error.
I have already activated all options on the menu of "mail" for autocorecion, and yet not self-correcting. What can i do?

Hi pstevereynolds,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with the language settings in the iTunes application.
iTunes: Changing the display language
http://support.apple.com/kb/ht2242
Cheers,
- Judy

Why can not backup the archived log when I perform intensive insertions

Similar Messages

Maybe you are looking for